Re: [PATCH v4 1/2] apic: Fix error interrupt report at all APs

[Ingo Molnar <mingo@elte.hu>]

* Youquan Song <youquan.song@intel.com> wrote:

> Recently, customer report that once machine boot, there are many error interrupt
> reported with exact number of all APs. 
> 
> The root cause is Local APIC will generate error interrupt when it detect
> the illegal vector (one in 0 ~ 15) in an interrupt message received or
> interrupt generate from local vector table or self IPI. SDM3A.chapter 10.
> 
> AP LAPIC thermal sensor register will be reset to 0x10000, if thermal throttling
> interrupt take over by BIOS, it need restore AP with the thermal sensor register
> value of geting from BSP, otherwise cause system issue. If BIOS does not take
> over the thermal interrupt, The restore value will be CPU rest value of 0x10000,
> which means the interrupt vector is zero. After writing 0x10000 to thermal
> sensor LVT, the processor will recieve the error interrupt report if the APIC
> error interrupt is also set.
> 
> This patch add check the BIOS whether take over the thermal interrupt by look
> at interrupt delivery mode not fixed mode(BIOS handle will be SMI mode) before
> restore AP's thermal LVT. So the agony noise of error interrupt will dismiss
> when boot on machine that BIOS does not handle thermal interrupt..  
> 
> 
> Signed-off-by: Youquan Song <youquan.song@intel.com>
> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
> Acked-by: Yong Wang <yong.y.wang@intel.com>
> ---
>  arch/x86/include/asm/apicdef.h           |    1 +
>  arch/x86/kernel/cpu/mcheck/therm_throt.c |   12 +++++++-----
>  2 files changed, 8 insertions(+), 5 deletions(-)

I don't disagree with this change, but unfortunately the changelog is in 
absolutely unreadable English. Please fix it or find someone who can fix it for 
you.

I decoded and fixed the changelog of the 2/2 patch of your series so no need to 
do it for that patch.

Thanks,

	Ingo