* [BUG] bluetooth doesn't work from 2.6.39-rc1+ to 2.6.39-rc3+
@ 2011-04-19 2:53 Hui Zhu
2011-04-19 3:05 ` Wanlong Gao
` (2 more replies)
0 siblings, 3 replies; 13+ messages in thread
From: Hui Zhu @ 2011-04-19 2:53 UTC (permalink / raw)
To: linux-kernel
Cannot connect to any outside devices through bluetooth.
And I think this is not a bug of low level driver. Because both my
laptop and a usb bluetooth card cannot work.
Thanks,
Hui
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: [BUG] bluetooth doesn't work from 2.6.39-rc1+ to 2.6.39-rc3+ 2011-04-19 2:53 [BUG] bluetooth doesn't work from 2.6.39-rc1+ to 2.6.39-rc3+ Hui Zhu @ 2011-04-19 3:05 ` Wanlong Gao 2011-04-19 5:11 ` Hui Zhu 2011-05-05 12:44 ` Milan Oravec 2011-04-19 7:46 ` Dave Young 2011-04-30 10:14 ` Milan Oravec 2 siblings, 2 replies; 13+ messages in thread From: Wanlong Gao @ 2011-04-19 3:05 UTC (permalink / raw) To: Hui Zhu; +Cc: linux-kernel On 4/19/11, Hui Zhu <teawater@gmail.com> wrote: > Cannot connect to any outside devices through bluetooth. > > And I think this is not a bug of low level driver. Because both my > laptop and a usb bluetooth card cannot work. > > Thanks, > Hui Maybe this patch can fix ? http://userweb.kernel.org/~akpm/mmotm/broken-out/bluetooth-fix-build-warnings-on-defconfigs.patch > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [BUG] bluetooth doesn't work from 2.6.39-rc1+ to 2.6.39-rc3+ 2011-04-19 3:05 ` Wanlong Gao @ 2011-04-19 5:11 ` Hui Zhu 2011-04-19 7:26 ` wanlong gao 2011-05-05 12:44 ` Milan Oravec 1 sibling, 1 reply; 13+ messages in thread From: Hui Zhu @ 2011-04-19 5:11 UTC (permalink / raw) To: wanlong.gao; +Cc: linux-kernel I don't think so. I am in x86_32 and x86_64. Thanks, Hui On Tue, Apr 19, 2011 at 11:05, Wanlong Gao <wanlong.gao@gmail.com> wrote: > On 4/19/11, Hui Zhu <teawater@gmail.com> wrote: >> Cannot connect to any outside devices through bluetooth. >> >> And I think this is not a bug of low level driver. Because both my >> laptop and a usb bluetooth card cannot work. >> >> Thanks, >> Hui > Maybe this patch can fix ? > http://userweb.kernel.org/~akpm/mmotm/broken-out/bluetooth-fix-build-warnings-on-defconfigs.patch >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> Please read the FAQ at http://www.tux.org/lkml/ >> > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [BUG] bluetooth doesn't work from 2.6.39-rc1+ to 2.6.39-rc3+ 2011-04-19 5:11 ` Hui Zhu @ 2011-04-19 7:26 ` wanlong gao 0 siblings, 0 replies; 13+ messages in thread From: wanlong gao @ 2011-04-19 7:26 UTC (permalink / raw) To: Hui Zhu; +Cc: linux-kernel On 4/19/11, Hui Zhu <teawater@gmail.com> wrote: > I don't think so. > > I am in x86_32 and x86_64. > > Thanks, > Hui So, you can copy your config file to the mail list , maybe some logs . It will be more helpful to your issue . Thanks Wanlong > > On Tue, Apr 19, 2011 at 11:05, Wanlong Gao <wanlong.gao@gmail.com> wrote: >> On 4/19/11, Hui Zhu <teawater@gmail.com> wrote: >>> Cannot connect to any outside devices through bluetooth. >>> >>> And I think this is not a bug of low level driver. Because both my >>> laptop and a usb bluetooth card cannot work. >>> >>> Thanks, >>> Hui >> Maybe this patch can fix ? >> http://userweb.kernel.org/~akpm/mmotm/broken-out/bluetooth-fix-build-warnings-on-defconfigs.patch >>> -- >>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" >>> in >>> the body of a message to majordomo@vger.kernel.org >>> More majordomo info at http://vger.kernel.org/majordomo-info.html >>> Please read the FAQ at http://www.tux.org/lkml/ >>> >> > -- Best regards Wanlong Gao ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [BUG] bluetooth doesn't work from 2.6.39-rc1+ to 2.6.39-rc3+ 2011-04-19 3:05 ` Wanlong Gao 2011-04-19 5:11 ` Hui Zhu @ 2011-05-05 12:44 ` Milan Oravec 1 sibling, 0 replies; 13+ messages in thread From: Milan Oravec @ 2011-05-05 12:44 UTC (permalink / raw) To: linux-kernel Hi, any news/solutions for this bug? It is still present in 2.6.39-rc6: root@migo:/home/migo# hciconfig hci0 up Can't init device hci0: Invalid argument (22) root@migo:/home/migo# hciconfig hci0: Type: BR/EDR Bus: USB BD Address: 00:10:60:A2:49:1C ACL MTU: 192:8 SCO MTU: 64:8 DOWN RX bytes:1424 acl:0 sco:0 events:48 errors:0 TX bytes:216 acl:0 sco:0 commands:48 errors:0 root@migo:/home/migo# uname -a Linux migo 2.6.39-rc6 #6 SMP PREEMPT Wed May 4 19:28:05 CEST 2011 i686 GNU/Linux root@migo:/home/migo# lsusb -v .... Bus 002 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 224 Wireless bDeviceSubClass 1 Radio Frequency bDeviceProtocol 1 Bluetooth bMaxPacketSize0 64 idVendor 0x0a12 Cambridge Silicon Radio, Ltd idProduct 0x0001 Bluetooth Dongle (HCI mode) bcdDevice 5.25 iManufacturer 0 iProduct 0 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 193 bNumInterfaces 3 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 224 Wireless bInterfaceSubClass 1 Radio Frequency bInterfaceProtocol 1 Bluetooth iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 224 Wireless bInterfaceSubClass 1 Radio Frequency bInterfaceProtocol 1 Bluetooth iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0000 1x 0 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0000 1x 0 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 224 Wireless bInterfaceSubClass 1 Radio Frequency bInterfaceProtocol 1 Bluetooth iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0009 1x 9 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0009 1x 9 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 2 bNumEndpoints 2 bInterfaceClass 224 Wireless bInterfaceSubClass 1 Radio Frequency bInterfaceProtocol 1 Bluetooth iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0011 1x 17 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0011 1x 17 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 3 bNumEndpoints 2 bInterfaceClass 224 Wireless bInterfaceSubClass 1 Radio Frequency bInterfaceProtocol 1 Bluetooth iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0019 1x 25 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0019 1x 25 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 4 bNumEndpoints 2 bInterfaceClass 224 Wireless bInterfaceSubClass 1 Radio Frequency bInterfaceProtocol 1 Bluetooth iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0021 1x 33 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0021 1x 33 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 5 bNumEndpoints 2 bInterfaceClass 224 Wireless bInterfaceSubClass 1 Radio Frequency bInterfaceProtocol 1 Bluetooth iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0031 1x 49 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0031 1x 49 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 254 Application Specific Interface bInterfaceSubClass 1 Device Firmware Update bInterfaceProtocol 0 iInterface 0 Device Firmware Upgrade Interface Descriptor: bLength 7 bDescriptorType 33 bmAttributes 7 Will Not Detach Manifestation Tolerant Upload Supported Download Supported wDetachTimeout 5000 milliseconds wTransferSize 1023 bytes Device Status: 0x0001 Self Powered .... Thanks Milan ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [BUG] bluetooth doesn't work from 2.6.39-rc1+ to 2.6.39-rc3+ 2011-04-19 2:53 [BUG] bluetooth doesn't work from 2.6.39-rc1+ to 2.6.39-rc3+ Hui Zhu 2011-04-19 3:05 ` Wanlong Gao @ 2011-04-19 7:46 ` Dave Young 2011-04-19 15:34 ` Hui Zhu 2011-04-30 10:14 ` Milan Oravec 2 siblings, 1 reply; 13+ messages in thread From: Dave Young @ 2011-04-19 7:46 UTC (permalink / raw) To: Hui Zhu; +Cc: linux-kernel, Bluettooth Linux On Tue, Apr 19, 2011 at 10:53 AM, Hui Zhu <teawater@gmail.com> wrote: > Cannot connect to any outside devices through bluetooth. > > And I think this is not a bug of low level driver. Because both my > laptop and a usb bluetooth card cannot work. Hi, please explain the "cannot work" in detail, Firstly check dmesg and hciconfig to see if there's anything wrong. -- Regards dave ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [BUG] bluetooth doesn't work from 2.6.39-rc1+ to 2.6.39-rc3+ 2011-04-19 7:46 ` Dave Young @ 2011-04-19 15:34 ` Hui Zhu 2011-04-24 13:52 ` Ed Tomlinson 0 siblings, 1 reply; 13+ messages in thread From: Hui Zhu @ 2011-04-19 15:34 UTC (permalink / raw) To: Dave Young; +Cc: linux-kernel, Bluettooth Linux Do you part is OK? I think it will be very easy to reproduce. Thanks, Hui On Tue, Apr 19, 2011 at 15:46, Dave Young <hidave.darkstar@gmail.com> wrote: > On Tue, Apr 19, 2011 at 10:53 AM, Hui Zhu <teawater@gmail.com> wrote: >> Cannot connect to any outside devices through bluetooth. >> >> And I think this is not a bug of low level driver. Because both my >> laptop and a usb bluetooth card cannot work. > > Hi, please explain the "cannot work" in detail, > Firstly check dmesg and hciconfig to see if there's anything wrong. > > -- > Regards > dave > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [BUG] bluetooth doesn't work from 2.6.39-rc1+ to 2.6.39-rc3+ 2011-04-19 15:34 ` Hui Zhu @ 2011-04-24 13:52 ` Ed Tomlinson 2011-04-26 16:13 ` Gustavo F. Padovan 2011-04-27 2:55 ` Dave Young 0 siblings, 2 replies; 13+ messages in thread From: Ed Tomlinson @ 2011-04-24 13:52 UTC (permalink / raw) To: Hui Zhu; +Cc: Dave Young, linux-kernel, Bluettooth Linux On Tuesday 19 April 2011 11:34:30 Hui Zhu wrote: > Do you part is OK? > > I think it will be very easy to reproduce. > > Thanks, > Hui > > On Tue, Apr 19, 2011 at 15:46, Dave Young <hidave.darkstar@gmail.com> wrote: > > On Tue, Apr 19, 2011 at 10:53 AM, Hui Zhu <teawater@gmail.com> wrote: > >> Cannot connect to any outside devices through bluetooth. > >> > >> And I think this is not a bug of low level driver. Because both my > >> laptop and a usb bluetooth card cannot work. > > > > Hi, please explain the "cannot work" in detail, > > Firstly check dmesg and hciconfig to see if there's anything wrong. I am also seeing problems with bluetooth in .39-rc4+ [54511.033258] usb 2-4.4: USB disconnect, device number 5 [54513.920060] usb 2-4.3: new full speed USB device number 6 using ehci_hcd [54514.063057] usb 2-4.3: New USB device found, idVendor=0a12, idProduct=0001 [54514.070281] usb 2-4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 grover ~ # hciconfig -a hci0: Type: BR/EDR Bus: USB BD Address: 00:0A:3A:55:07:5A ACL MTU: 192:8 SCO MTU: 64:8 DOWN RX bytes:718 acl:0 sco:0 events:25 errors:0 TX bytes:108 acl:0 sco:0 commands:24 errors:0 Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: CONFIG_BT_HCIBTUSB=m Link mode: SLAVE ACCEPT grover ~ # hciconfig hci0 up Can't init device hci0: Invalid argument (22) The same error happens If I just try a hciconfig hci0 up after boot (without replugging the adaptor). CONFIG_BT_HCIBTSDIO=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y # CONFIG_BT_HCIUART_ATH3K is not set CONFIG_BT_HCIUART_LL=y CONFIG_BT_HCIBCM203X=m CONFIG_BT_HCIBPA10X=m CONFIG_BT_HCIBFUSB=m CONFIG_BT_HCIVHCI=m and bluez-4.91 is installed Ideas? Ed Tomlinson ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [BUG] bluetooth doesn't work from 2.6.39-rc1+ to 2.6.39-rc3+ 2011-04-24 13:52 ` Ed Tomlinson @ 2011-04-26 16:13 ` Gustavo F. Padovan 2011-04-27 10:57 ` Ed Tomlinson 2011-04-27 2:55 ` Dave Young 1 sibling, 1 reply; 13+ messages in thread From: Gustavo F. Padovan @ 2011-04-26 16:13 UTC (permalink / raw) To: Ed Tomlinson; +Cc: Hui Zhu, Dave Young, linux-kernel, Bluettooth Linux * Ed Tomlinson <edt@aei.ca> [2011-04-24 09:52:14 -0400]: > On Tuesday 19 April 2011 11:34:30 Hui Zhu wrote: > > Do you part is OK? > > > > I think it will be very easy to reproduce. > > > > Thanks, > > Hui > > > > On Tue, Apr 19, 2011 at 15:46, Dave Young <hidave.darkstar@gmail.com> wrote: > > > On Tue, Apr 19, 2011 at 10:53 AM, Hui Zhu <teawater@gmail.com> wrote: > > >> Cannot connect to any outside devices through bluetooth. > > >> > > >> And I think this is not a bug of low level driver. Because both my > > >> laptop and a usb bluetooth card cannot work. > > > > > > Hi, please explain the "cannot work" in detail, > > > Firstly check dmesg and hciconfig to see if there's anything wrong. > > I am also seeing problems with bluetooth in .39-rc4+ > > [54511.033258] usb 2-4.4: USB disconnect, device number 5 > [54513.920060] usb 2-4.3: new full speed USB device number 6 using ehci_hcd > [54514.063057] usb 2-4.3: New USB device found, idVendor=0a12, idProduct=0001 > [54514.070281] usb 2-4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > grover ~ # hciconfig -a > hci0: Type: BR/EDR Bus: USB > BD Address: 00:0A:3A:55:07:5A ACL MTU: 192:8 SCO MTU: 64:8 > DOWN > RX bytes:718 acl:0 sco:0 events:25 errors:0 > TX bytes:108 acl:0 sco:0 commands:24 errors:0 > Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00 > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 > Link policy: CONFIG_BT_HCIBTUSB=m > Link mode: SLAVE ACCEPT > > grover ~ # hciconfig hci0 up > Can't init device hci0: Invalid argument (22) does dmesg show something? I'm using a -rc kernel and bluetooth is working to me. -- Gustavo F. Padovan http://profusion.mobi ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [BUG] bluetooth doesn't work from 2.6.39-rc1+ to 2.6.39-rc3+ 2011-04-26 16:13 ` Gustavo F. Padovan @ 2011-04-27 10:57 ` Ed Tomlinson 0 siblings, 0 replies; 13+ messages in thread From: Ed Tomlinson @ 2011-04-27 10:57 UTC (permalink / raw) To: Gustavo F. Padovan; +Cc: Hui Zhu, Dave Young, linux-kernel, Bluettooth Linux On Tuesday 26 April 2011 12:13:30 Gustavo F. Padovan wrote: > * Ed Tomlinson <edt@aei.ca> [2011-04-24 09:52:14 -0400]: > > > On Tuesday 19 April 2011 11:34:30 Hui Zhu wrote: > > > Do you part is OK? > > > > > > I think it will be very easy to reproduce. > > > > > > Thanks, > > > Hui > > > > > > On Tue, Apr 19, 2011 at 15:46, Dave Young <hidave.darkstar@gmail.com> wrote: > > > > On Tue, Apr 19, 2011 at 10:53 AM, Hui Zhu <teawater@gmail.com> wrote: > > > >> Cannot connect to any outside devices through bluetooth. > > > >> > > > >> And I think this is not a bug of low level driver. Because both my > > > >> laptop and a usb bluetooth card cannot work. > > > > > > > > Hi, please explain the "cannot work" in detail, > > > > Firstly check dmesg and hciconfig to see if there's anything wrong. > > > > I am also seeing problems with bluetooth in .39-rc4+ > > > > [54511.033258] usb 2-4.4: USB disconnect, device number 5 > > [54513.920060] usb 2-4.3: new full speed USB device number 6 using ehci_hcd > > [54514.063057] usb 2-4.3: New USB device found, idVendor=0a12, idProduct=0001 > > [54514.070281] usb 2-4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > > grover ~ # hciconfig -a > > hci0: Type: BR/EDR Bus: USB > > BD Address: 00:0A:3A:55:07:5A ACL MTU: 192:8 SCO MTU: 64:8 > > DOWN > > RX bytes:718 acl:0 sco:0 events:25 errors:0 > > TX bytes:108 acl:0 sco:0 commands:24 errors:0 > > Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00 > > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 > > Link policy: CONFIG_BT_HCIBTUSB=m > > Link mode: SLAVE ACCEPT > > > > grover ~ # hciconfig hci0 up > > Can't init device hci0: Invalid argument (22) > > does dmesg show something? I'm using a -rc kernel and bluetooth is working to > me. What dmesg shows is included above. The tell tail for this bug is the error 22 from user space. I see nothing on the kernel side. Ed ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [BUG] bluetooth doesn't work from 2.6.39-rc1+ to 2.6.39-rc3+ 2011-04-24 13:52 ` Ed Tomlinson 2011-04-26 16:13 ` Gustavo F. Padovan @ 2011-04-27 2:55 ` Dave Young 2011-04-27 11:00 ` Ed Tomlinson 1 sibling, 1 reply; 13+ messages in thread From: Dave Young @ 2011-04-27 2:55 UTC (permalink / raw) To: Ed Tomlinson; +Cc: Hui Zhu, linux-kernel, Bluettooth Linux On Sun, Apr 24, 2011 at 9:52 PM, Ed Tomlinson <edt@aei.ca> wrote: > On Tuesday 19 April 2011 11:34:30 Hui Zhu wrote: >> Do you part is OK? >> >> I think it will be very easy to reproduce. >> >> Thanks, >> Hui >> >> On Tue, Apr 19, 2011 at 15:46, Dave Young <hidave.darkstar@gmail.com> wrote: >> > On Tue, Apr 19, 2011 at 10:53 AM, Hui Zhu <teawater@gmail.com> wrote: >> >> Cannot connect to any outside devices through bluetooth. >> >> >> >> And I think this is not a bug of low level driver. Because both my >> >> laptop and a usb bluetooth card cannot work. >> > >> > Hi, please explain the "cannot work" in detail, >> > Firstly check dmesg and hciconfig to see if there's anything wrong. > > I am also seeing problems with bluetooth in .39-rc4+ > > [54511.033258] usb 2-4.4: USB disconnect, device number 5 > [54513.920060] usb 2-4.3: new full speed USB device number 6 using ehci_hcd > [54514.063057] usb 2-4.3: New USB device found, idVendor=0a12, idProduct=0001 > [54514.070281] usb 2-4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > grover ~ # hciconfig -a > hci0: Type: BR/EDR Bus: USB > BD Address: 00:0A:3A:55:07:5A ACL MTU: 192:8 SCO MTU: 64:8 > DOWN > RX bytes:718 acl:0 sco:0 events:25 errors:0 > TX bytes:108 acl:0 sco:0 commands:24 errors:0 > Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00 > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 > Link policy: CONFIG_BT_HCIBTUSB=m > Link mode: SLAVE ACCEPT > > grover ~ # hciconfig hci0 up > Can't init device hci0: Invalid argument (22) > > The same error happens If I just try a hciconfig hci0 up after boot (without replugging the adaptor). I did not see your problem, my usb dongle usbid is 0a12:0001 as well, maybe bisect is the way to go. > > CONFIG_BT_HCIBTSDIO=m > CONFIG_BT_HCIUART=m > CONFIG_BT_HCIUART_H4=y > CONFIG_BT_HCIUART_BCSP=y > # CONFIG_BT_HCIUART_ATH3K is not set > CONFIG_BT_HCIUART_LL=y > CONFIG_BT_HCIBCM203X=m > CONFIG_BT_HCIBPA10X=m > CONFIG_BT_HCIBFUSB=m > CONFIG_BT_HCIVHCI=m > > and bluez-4.91 is installed > > Ideas? > Ed Tomlinson > -- Regards dave ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [BUG] bluetooth doesn't work from 2.6.39-rc1+ to 2.6.39-rc3+ 2011-04-27 2:55 ` Dave Young @ 2011-04-27 11:00 ` Ed Tomlinson 0 siblings, 0 replies; 13+ messages in thread From: Ed Tomlinson @ 2011-04-27 11:00 UTC (permalink / raw) To: Dave Young; +Cc: Hui Zhu, linux-kernel, Bluettooth Linux On Tuesday 26 April 2011 22:55:22 Dave Young wrote: > On Sun, Apr 24, 2011 at 9:52 PM, Ed Tomlinson <edt@aei.ca> wrote: > > On Tuesday 19 April 2011 11:34:30 Hui Zhu wrote: > >> Do you part is OK? > >> > >> I think it will be very easy to reproduce. > >> > >> Thanks, > >> Hui > >> > >> On Tue, Apr 19, 2011 at 15:46, Dave Young <hidave.darkstar@gmail.com> wrote: > >> > On Tue, Apr 19, 2011 at 10:53 AM, Hui Zhu <teawater@gmail.com> wrote: > >> >> Cannot connect to any outside devices through bluetooth. > >> >> > >> >> And I think this is not a bug of low level driver. Because both my > >> >> laptop and a usb bluetooth card cannot work. > >> > > >> > Hi, please explain the "cannot work" in detail, > >> > Firstly check dmesg and hciconfig to see if there's anything wrong. > > > > I am also seeing problems with bluetooth in .39-rc4+ > > > > [54511.033258] usb 2-4.4: USB disconnect, device number 5 > > [54513.920060] usb 2-4.3: new full speed USB device number 6 using ehci_hcd > > [54514.063057] usb 2-4.3: New USB device found, idVendor=0a12, idProduct=0001 > > [54514.070281] usb 2-4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > > grover ~ # hciconfig -a > > hci0: Type: BR/EDR Bus: USB > > BD Address: 00:0A:3A:55:07:5A ACL MTU: 192:8 SCO MTU: 64:8 > > DOWN > > RX bytes:718 acl:0 sco:0 events:25 errors:0 > > TX bytes:108 acl:0 sco:0 commands:24 errors:0 > > Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00 > > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 > > Link policy: CONFIG_BT_HCIBTUSB=m > > Link mode: SLAVE ACCEPT > > > > grover ~ # hciconfig hci0 up > > Can't init device hci0: Invalid argument (22) > > > > The same error happens If I just try a hciconfig hci0 up after boot (without replugging the adaptor). > > I did not see your problem, my usb dongle usbid is 0a12:0001 as well, > maybe bisect is the way to go. I can try but this bug was introduced during the .38 to rc1 window. I've not had much luck bisecting through pre rc1... Is there any good way to trace what is giving the 'Invalid argument 22'? Ed > > > > CONFIG_BT_HCIBTSDIO=m > > CONFIG_BT_HCIUART=m > > CONFIG_BT_HCIUART_H4=y > > CONFIG_BT_HCIUART_BCSP=y > > # CONFIG_BT_HCIUART_ATH3K is not set > > CONFIG_BT_HCIUART_LL=y > > CONFIG_BT_HCIBCM203X=m > > CONFIG_BT_HCIBPA10X=m > > CONFIG_BT_HCIBFUSB=m > > CONFIG_BT_HCIVHCI=m > > > > and bluez-4.91 is installed > > > > Ideas? > > Ed Tomlinson > > > > > > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [BUG] bluetooth doesn't work from 2.6.39-rc1+ to 2.6.39-rc3+ 2011-04-19 2:53 [BUG] bluetooth doesn't work from 2.6.39-rc1+ to 2.6.39-rc3+ Hui Zhu 2011-04-19 3:05 ` Wanlong Gao 2011-04-19 7:46 ` Dave Young @ 2011-04-30 10:14 ` Milan Oravec 2 siblings, 0 replies; 13+ messages in thread From: Milan Oravec @ 2011-04-30 10:14 UTC (permalink / raw) To: linux-kernel Hui Zhu <teawater <at> gmail.com> writes: > > Cannot connect to any outside devices through bluetooth. > > And I think this is not a bug of low level driver. Because both my > laptop and a usb bluetooth card cannot work. > > Thanks, > Hui > Hi, I have the same problem here. My usb blue-tooth dongle can not be enabled up in .39 kernel series. In 2.6.38.x and earlier it works fine. Anny suggestions? Thank you very much. Best regards Milan. ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2011-05-05 12:45 UTC | newest] Thread overview: 13+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2011-04-19 2:53 [BUG] bluetooth doesn't work from 2.6.39-rc1+ to 2.6.39-rc3+ Hui Zhu 2011-04-19 3:05 ` Wanlong Gao 2011-04-19 5:11 ` Hui Zhu 2011-04-19 7:26 ` wanlong gao 2011-05-05 12:44 ` Milan Oravec 2011-04-19 7:46 ` Dave Young 2011-04-19 15:34 ` Hui Zhu 2011-04-24 13:52 ` Ed Tomlinson 2011-04-26 16:13 ` Gustavo F. Padovan 2011-04-27 10:57 ` Ed Tomlinson 2011-04-27 2:55 ` Dave Young 2011-04-27 11:00 ` Ed Tomlinson 2011-04-30 10:14 ` Milan Oravec
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox