[PATCH 13/23] intel_sst: move jack detection related configs to init time

[Alan Cox <alan@lxorguk.ukuu.org.uk>]

From: Lu Guanqun <guanqun.lu@intel.com>

The old policy will not enable MIC2BIAS on Moorstown platform
by default, it's only enabled when the user selects HS_MIC as input source.
Therefore when user selects DMIC and then inserts the jack,
no interrupt will be generated to notify the driver about the
jack insertion event and to take action to auto mute the speaker.

The new policy will enable this bit by default,
then no matter what the output device is, an interrupt will be generated.

This behaviour is more likely what a user expects.

Signed-off-by: Lu Guanqun <guanqun.lu@intel.com>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
---

 drivers/staging/intel_sst/intelmid_v2_control.c |   28 +++++++++++------------
 1 files changed, 13 insertions(+), 15 deletions(-)


diff --git a/drivers/staging/intel_sst/intelmid_v2_control.c b/drivers/staging/intel_sst/intelmid_v2_control.c
index 7cae970..6f4caa5 100644
--- a/drivers/staging/intel_sst/intelmid_v2_control.c
+++ b/drivers/staging/intel_sst/intelmid_v2_control.c
@@ -114,18 +114,19 @@ static int nc_init_card(void)
 		{VOICEVOL, 0x0e, 0},
 		{HPLVOL, 0x06, 0},
 		{HPRVOL, 0x06, 0},
-		{MICCTRL, 0x41, 0x00},
+		{MICCTRL, 0x51, 0x00},
 		{ADCSAMPLERATE, 0x8B, 0x00},
 		{MICSELVOL, 0x5B, 0x00},
 		{LILSEL, 0x06, 0},
 		{LIRSEL, 0x46, 0},
 		{LOANTIPOP, 0x00, 0},
 		{DMICCTRL1, 0x40, 0},
+		{AUXDBNC, 0xff, 0},
 	};
 	snd_pmic_ops_nc.card_status = SND_CARD_INIT_DONE;
 	snd_pmic_ops_nc.master_mute = UNMUTE;
 	snd_pmic_ops_nc.mute_status = UNMUTE;
-	sst_sc_reg_access(sc_access, PMIC_WRITE, 26);
+	sst_sc_reg_access(sc_access, PMIC_WRITE, 27);
 	pr_debug("init complete!!\n");
 	return 0;
 }
@@ -834,7 +835,7 @@ static int nc_set_selected_input_dev(u8 value)
 		pr_debug("Selecting AMIC\n");
 		sc_access[0].reg_addr = 0x107;
 		sc_access[0].value = 0x40;
-		sc_access[0].mask =  MASK6|MASK4|MASK3|MASK1|MASK0;
+		sc_access[0].mask =  MASK6|MASK3|MASK1|MASK0;
 		sc_access[1].reg_addr = 0x10a;
 		sc_access[1].value = 0x40;
 		sc_access[1].mask = MASK6;
@@ -849,9 +850,9 @@ static int nc_set_selected_input_dev(u8 value)
 
 	case HS_MIC:
 		pr_debug("Selecting HS_MIC\n");
-		sc_access[0].reg_addr = 0x107;
-		sc_access[0].mask =  MASK6|MASK4|MASK3|MASK1|MASK0;
-		sc_access[0].value = 0x10;
+		sc_access[0].reg_addr = MICCTRL;
+		sc_access[0].mask =  MASK6|MASK3|MASK1|MASK0;
+		sc_access[0].value = 0x00;
 		sc_access[1].reg_addr = 0x109;
 		sc_access[1].mask = MASK6;
 		sc_access[1].value = 0x40;
@@ -861,19 +862,16 @@ static int nc_set_selected_input_dev(u8 value)
 		sc_access[3].reg_addr = 0x105;
 		sc_access[3].value = 0x40;
 		sc_access[3].mask = MASK6;
-		sc_access[4].reg_addr = AUXDBNC;
-		sc_access[4].mask = MASK7|MASK6|MASK5|MASK4|MASK3|MASK2|MASK1|MASK0;
-		sc_access[4].value = 0xff;
-		sc_access[5].reg_addr = ADCSAMPLERATE;
-		sc_access[5].mask = MASK7|MASK6|MASK5|MASK4|MASK3;
-		sc_access[5].value = 0xc8;
-		num_val = 6;
+		sc_access[4].reg_addr = ADCSAMPLERATE;
+		sc_access[4].mask = MASK7|MASK6|MASK5|MASK4|MASK3;
+		sc_access[4].value = 0xc8;
+		num_val = 5;
 		break;
 
 	case DMIC:
 		pr_debug("DMIC\n");
-		sc_access[0].reg_addr = 0x107;
-		sc_access[0].mask = MASK6|MASK4|MASK3|MASK1|MASK0;
+		sc_access[0].reg_addr = MICCTRL;
+		sc_access[0].mask = MASK6|MASK3|MASK1|MASK0;
 		sc_access[0].value = 0x0B;
 		sc_access[1].reg_addr = 0x105;
 		sc_access[1].value = 0x80;