From: Grant Likely <grant.likely@secretlab.ca>
To: Jamie Iles <jamie@jamieiles.com>
Cc: linux-kernel@vger.kernel.org, linux@arm.linux.org.uk,
tglx@linutronix.de, cbouatmailru@gmail.com, arnd@arndb.de,
nico@fluxnic.net
Subject: Re: [PATCHv3 3/7] basic_mmio_gpio: allow overriding number of gpio
Date: Tue, 3 May 2011 13:41:36 -0600 [thread overview]
Message-ID: <20110503194136.GC9401@ponder.secretlab.ca> (raw)
In-Reply-To: <1302520914-22816-4-git-send-email-jamie@jamieiles.com>
On Mon, Apr 11, 2011 at 12:21:50PM +0100, Jamie Iles wrote:
> Some platforms may have a number of GPIO that is less than the register
> width of the peripheral.
>
> Signed-off-by: Jamie Iles <jamie@jamieiles.com>
> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
> Cc: Grant Likely <grant.likely@secretlab.ca>
Merged, thanks.
g.
> ---
> drivers/gpio/basic_mmio_gpio.c | 18 ++++++++++++------
> include/linux/basic_mmio_gpio.h | 1 +
> 2 files changed, 13 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpio/basic_mmio_gpio.c b/drivers/gpio/basic_mmio_gpio.c
> index 5db5de4..2b2d384 100644
> --- a/drivers/gpio/basic_mmio_gpio.c
> +++ b/drivers/gpio/basic_mmio_gpio.c
> @@ -239,6 +239,7 @@ static int __devinit bgpio_probe(struct platform_device *pdev)
> resource_size_t dat_sz;
> int bits;
> int ret;
> + int ngpio;
>
> res_dat = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dat");
> if (!res_dat)
> @@ -249,6 +250,7 @@ static int __devinit bgpio_probe(struct platform_device *pdev)
> return -EINVAL;
>
> bits = dat_sz * 8;
> + ngpio = bits;
> if (bits > BITS_PER_LONG)
> return -EINVAL;
>
> @@ -277,13 +279,22 @@ static int __devinit bgpio_probe(struct platform_device *pdev)
>
> spin_lock_init(&bgc->lock);
>
> + if (pdata) {
> + bgc->gc.base = pdata->base;
> + if (pdata->ngpio > 0)
> + ngpio = pdata->ngpio;
> + } else {
> + bgc->gc.base = -1;
> + }
> +
> bgc->bits = bits;
> ret = bgpio_setup_accessors(pdev, bgc);
> if (ret)
> return ret;
>
> bgc->data = bgc->read_reg(bgc->reg_dat);
> - bgc->gc.ngpio = bits;
> +
> + bgc->gc.ngpio = ngpio;
> bgc->gc.direction_input = bgpio_dir_in;
> bgc->gc.direction_output = bgpio_dir_out;
> bgc->gc.get = bgpio_get;
> @@ -291,11 +302,6 @@ static int __devinit bgpio_probe(struct platform_device *pdev)
> bgc->gc.dev = dev;
> bgc->gc.label = dev_name(dev);
>
> - if (pdata)
> - bgc->gc.base = pdata->base;
> - else
> - bgc->gc.base = -1;
> -
> platform_set_drvdata(pdev, bgc);
>
> ret = gpiochip_add(&bgc->gc);
> diff --git a/include/linux/basic_mmio_gpio.h b/include/linux/basic_mmio_gpio.h
> index 198087a..f23ec73 100644
> --- a/include/linux/basic_mmio_gpio.h
> +++ b/include/linux/basic_mmio_gpio.h
> @@ -15,6 +15,7 @@
>
> struct bgpio_pdata {
> int base;
> + int ngpio;
> };
>
> #endif /* __BASIC_MMIO_GPIO_H */
> --
> 1.7.4.2
>
next prev parent reply other threads:[~2011-05-03 19:41 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-11 11:21 [PATCHv3 0/7] gpio: extend basic_mmio_gpio for different controllers Jamie Iles
2011-04-11 11:21 ` [PATCHv3 1/7] basic_mmio_gpio: remove runtime width/endianness evaluation Jamie Iles
2011-05-03 19:41 ` Grant Likely
2011-04-11 11:21 ` [PATCHv3 2/7] basic_mmio_gpio: convert to platform_{get,set}_drvdata() Jamie Iles
2011-05-03 19:41 ` Grant Likely
2011-04-11 11:21 ` [PATCHv3 3/7] basic_mmio_gpio: allow overriding number of gpio Jamie Iles
2011-05-03 19:41 ` Grant Likely [this message]
2011-04-11 11:21 ` [PATCHv3 4/7] basic_mmio_gpio: request register regions Jamie Iles
2011-05-03 19:41 ` Grant Likely
2011-04-11 11:21 ` [PATCHv3 5/7] basic_mmio_gpio: detect output method at probe time Jamie Iles
2011-04-11 12:05 ` Anton Vorontsov
2011-05-03 19:42 ` Grant Likely
2011-04-11 11:21 ` [PATCHv3 6/7] basic_mmio_gpio: support different input/output registers Jamie Iles
2011-04-11 12:06 ` Anton Vorontsov
2011-05-03 19:42 ` Grant Likely
2011-04-11 11:21 ` [PATCHv3 7/7] basic_mmio_gpio: support direction registers Jamie Iles
2011-05-03 19:42 ` Grant Likely
2011-05-03 21:09 ` [PATCHv3 0/7] gpio: extend basic_mmio_gpio for different controllers Grant Likely
2011-05-03 21:13 ` Grant Likely
2011-05-03 21:36 ` Grant Likely
2011-05-03 21:52 ` Anton Vorontsov
2011-05-03 22:04 ` Jamie Iles
2011-05-03 22:34 ` Anton Vorontsov
2011-05-04 0:00 ` Grant Likely
2011-05-04 10:36 ` Anton Vorontsov
2011-05-04 11:09 ` Jamie Iles
2011-05-04 11:31 ` Anton Vorontsov
2011-05-04 14:37 ` Jamie Iles
2011-05-04 14:43 ` Grant Likely
2011-05-04 14:44 ` Alan Cox
2011-05-04 14:57 ` Jamie Iles
2011-05-04 15:02 ` Anton Vorontsov
2011-05-04 15:04 ` Jamie Iles
2011-05-13 19:37 ` Anton Vorontsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110503194136.GC9401@ponder.secretlab.ca \
--to=grant.likely@secretlab.ca \
--cc=arnd@arndb.de \
--cc=cbouatmailru@gmail.com \
--cc=jamie@jamieiles.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=nico@fluxnic.net \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox