From: Tino Keitel <tino.keitel@tikei.de>
To: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org
Subject: Re: 2.6.39-rc6: SATA hangs for a few seconds during boot
Date: Wed, 11 May 2011 08:12:25 +0200 [thread overview]
Message-ID: <20110511061225.GA2342@x61.home> (raw)
In-Reply-To: <20110509204801.GA2258@x61.home>
[-- Attachment #1: Type: text/plain, Size: 2904 bytes --]
On Mon, May 09, 2011 at 22:48:01 +0200, Tino Keitel wrote:
> Hi,
>
> I get a hanging SATA port for a few seconds during boot, with these
> kernel messages:
>
> ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x40000 action 0x6 frozen
> ata1.00: cmd 60/20:00:55:e1:65/00:00:00:00:00/40 tag 0 ncq 16384 in
> res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata1.00: cmd 60/02:08:c1:5c:03/00:00:00:00:00/40 tag 1 ncq 1024 in
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata1: hard resetting link
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: both IDENTIFYs aborted, assuming NODEV
> ata1.00: revalidation failed (errno=-2)
> ata1: hard resetting link
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded
> ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out
> ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (unknown) succeeded
> ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out
> ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded
> ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out
> ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (unknown) succeeded
> ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out
> ata1.00: configured for UDMA/133
> ata1.00: device reported invalid CHS sector 0
> ata1.00: device reported invalid CHS sector 0
> ata1: EH complete
>
> This happens with 2.6.39-rc6 with TuxOnIce patch included, but during boot
> without any suspend actions. The hardware is a ThinkPad X61s:
Hi,
I tried again with vanilla 2.6.39-rc7 and got the same hang:
ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x40000 action 0x6 frozen
ata1.00: cmd 60/02:00:a5:80:07/00:00:00:00:00/40 tag 0 ncq 1024 in
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: cmd 60/02:08:fd:5d:03/00:00:00:00:00/40 tag 1 ncq 1024 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: both IDENTIFYs aborted, assuming NODEV
ata1.00: revalidation failed (errno=-2)
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out
ata1.00: configured for UDMA/133
ata1.00: device reported invalid CHS sector 0
ata1.00: device reported invalid CHS sector 0
ata1: EH complete
I also attached the config file.
Regards,
Tino
[-- Attachment #2: config.xz --]
[-- Type: application/octet-stream, Size: 14584 bytes --]
next prev parent reply other threads:[~2011-05-11 16:10 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-09 20:48 2.6.39-rc6: SATA hangs for a few seconds during boot Tino Keitel
2011-05-11 6:12 ` Tino Keitel [this message]
2011-05-11 19:33 ` Maciej Rutecki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110511061225.GA2342@x61.home \
--to=tino.keitel@tikei.de \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).