linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mel Gorman <mgorman@suse.de>
To: Christoph Lameter <cl@linux.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
	James Bottomley <James.Bottomley@HansenPartnership.com>,
	Colin King <colin.king@canonical.com>,
	Raghavendra D Prabhu <raghu.prabhu13@gmail.com>,
	Jan Kara <jack@suse.cz>, Chris Mason <chris.mason@oracle.com>,
	Pekka Enberg <penberg@kernel.org>, Rik van Riel <riel@redhat.com>,
	Johannes Weiner <hannes@cmpxchg.org>,
	linux-fsdevel <linux-fsdevel@vger.kernel.org>,
	linux-mm <linux-mm@kvack.org>,
	linux-kernel <linux-kernel@vger.kernel.org>,
	linux-ext4 <linux-ext4@vger.kernel.org>
Subject: Re: [PATCH 0/4] Reduce impact to overall system of SLUB using high-order allocations V2
Date: Fri, 13 May 2011 16:43:22 +0100	[thread overview]
Message-ID: <20110513154322.GI3569@suse.de> (raw)
In-Reply-To: <alpine.DEB.2.00.1105131009530.24193@router.home>

On Fri, May 13, 2011 at 10:21:46AM -0500, Christoph Lameter wrote:
> On Fri, 13 May 2011, Mel Gorman wrote:
> 
> > SLUB using high orders is the trigger but not the root cause as SLUB
> > has been using high orders for a while. The following four patches
> > aim to fix the problems in reclaim while reducing the cost for SLUB
> > using those high orders.
> >
> > Patch 1 corrects logic introduced by commit [1741c877: mm:
> > 	kswapd: keep kswapd awake for high-order allocations until
> > 	a percentage of the node is balanced] to allow kswapd to
> > 	go to sleep when balanced for high orders.
> 
> The above looks good.
> 

Ok.

> > Patch 2 prevents kswapd waking up in response to SLUBs speculative
> > 	use of high orders.
> 
> Not sure if that is necessary since it seems that we triggered kswapd
> before? Why not continue to do it? Once kswapd has enough higher order
> pages kswapd should no longer be triggered right?
> 

Because kswapd waking up isn't cheap and we are reclaiming pages
just so SLUB may get high-order pages in the future. As it's for
PAGE_ORDER_COSTLY_ORDER, we are not entering lumpy reclaim and just
selecting a few random order-0 pages which may or may not help. There
is very little control of how many pages are getting freed if kswapd
is being woken frequently.

> > Patch 3 further reduces the cost by prevent SLUB entering direct
> > 	compaction or reclaim paths on the grounds that falling
> > 	back to order-0 should be cheaper.
> 
> Its cheaper for reclaim path true but more expensive in terms of SLUBs
> management costs of the data and it also increases the memory wasted.

Surely the reclaim cost exceeds SLUB management cost?

> A
> higher order means denser packing of objects less page management
> overhead. Fallback is not for free.

Neither is reclaiming a large bunch of pages. Worse, reclaiming
pages so SLUB gets a high-order means it's likely to be stealing
MIGRATE_MOVABLE blocks which eventually gives diminishing returns but
may not be noticeable for weeks. From a fragmentation perspective,
it's better if SLUB uses order-0 allocations when memory is low so
that SLUB pages continue to get packed into as few MIGRATE_UNMOVABLE
and MIGRATE_UNRECLAIMABLE blocks as possible.

>  Reasonable effort should be made to
> allocate the page order requested.
> 
> > Patch 4 notes that even when kswapd is failing to keep up with
> > 	allocation requests, it should still go to sleep when its
> > 	quota has expired to prevent it spinning.
> 
> Looks good too.
> 
> Overall, it looks like the compaction logic and the modifications to
> reclaim introduced recently with the intend to increase the amount of
> physically contiguous memory is not working as expected.
> 

The reclaim and kswapd damage was unintended and this is my fault
but reclaim/compaction still makes a lot more sense than lumpy
reclaim. Testing showed it disrupted the system a lot less and
allocated high-order pages faster with fewer pages reclaimed.

> SLUBs chance of getting higher order pages should be *increasing* as a
> result of these changes. The above looks like the chances are decreasing
> now.
> 

Patches 2 and 3 may mean that SLUB gets fewer high order pages when
memory is low and it's depending on high-order pages to be naturally
freed by SLUB as it recycles slabs of old objects. On the flip-side,
fewer pages will be reclaimed. I'd expect the latter option is
cheaper overall.

> This is a matter of future concern. The metadata management overhead
> in the kernel is continually increasing since memory sizes keep growing
> and we typically manage memory in 4k chunks. Through large allocation
> sizes we can reduce that management overhead but we can only do this if we
> have an effective way of defragmenting memory to get longer contiguous
> chunks that can be managed to a single page struct.
> 
> Please make sure that compaction and related measures really work properly.
> 

Local testing still shows them to be behaving as expected but then
again, I haven't reproduced the simple problem reported by Chris
and James despite using a few different laptops and two different
low-end servers.

> The patches suggest that the recent modifications are not improving the
> situation.
> 

-- 
Mel Gorman
SUSE Labs

  reply	other threads:[~2011-05-13 15:43 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-05-13 14:03 [PATCH 0/4] Reduce impact to overall system of SLUB using high-order allocations V2 Mel Gorman
2011-05-13 14:03 ` [PATCH 1/4] mm: vmscan: Correct use of pgdat_balanced in sleeping_prematurely Mel Gorman
2011-05-13 14:28   ` Johannes Weiner
2011-05-14 16:30   ` Minchan Kim
2011-05-16 14:30   ` Rik van Riel
2011-05-13 14:03 ` [PATCH 2/4] mm: slub: Do not wake kswapd for SLUBs speculative high-order allocations Mel Gorman
2011-05-16 21:10   ` David Rientjes
2011-05-18  6:09     ` Pekka Enberg
2011-05-18 17:21       ` Christoph Lameter
2011-05-13 14:03 ` [PATCH 3/4] mm: slub: Do not take expensive steps " Mel Gorman
2011-05-16 21:16   ` David Rientjes
2011-05-17  8:42     ` Mel Gorman
2011-05-17 13:51       ` Christoph Lameter
2011-05-17 16:22         ` Mel Gorman
2011-05-17 17:52           ` Christoph Lameter
2011-05-17 19:35             ` David Rientjes
2011-05-17 19:31       ` David Rientjes
2011-05-13 14:03 ` [PATCH 4/4] mm: vmscan: If kswapd has been running too long, allow it to sleep Mel Gorman
2011-05-15 10:27   ` KOSAKI Motohiro
2011-05-16  4:21     ` James Bottomley
2011-05-16  5:04       ` Minchan Kim
2011-05-16  8:45         ` Mel Gorman
2011-05-16  8:58           ` Minchan Kim
2011-05-16 10:27             ` Mel Gorman
2011-05-16 23:50               ` Minchan Kim
2011-05-17  0:48                 ` Minchan Kim
2011-05-17 10:38                 ` Mel Gorman
2011-05-17 13:50                   ` Colin Ian King
2011-05-17 16:15                     ` [PATCH] mm: vmscan: Correctly check if reclaimer should schedule during shrink_slab Mel Gorman
2011-05-18  0:45                       ` KOSAKI Motohiro
2011-05-19  0:03                       ` Minchan Kim
2011-05-19  0:09                       ` Minchan Kim
2011-05-19 11:36                         ` Colin Ian King
2011-05-20  0:06                           ` Minchan Kim
2011-05-18  4:19                     ` [PATCH 4/4] mm: vmscan: If kswapd has been running too long, allow it to sleep Minchan Kim
2011-05-18  7:39                       ` Colin Ian King
2011-05-18  4:09                   ` James Bottomley
2011-05-18  1:05                 ` KOSAKI Motohiro
2011-05-18  5:44                   ` Minchan Kim
2011-05-18  6:05                     ` KOSAKI Motohiro
2011-05-18  9:58                     ` Mel Gorman
2011-05-18 22:55                       ` Minchan Kim
2011-05-18 23:54                         ` KOSAKI Motohiro
2011-05-18  0:26               ` KOSAKI Motohiro
2011-05-18  9:57                 ` Mel Gorman
2011-05-16  8:45     ` Mel Gorman
2011-05-16 14:30   ` Rik van Riel
2011-05-13 15:19 ` [PATCH 0/4] Reduce impact to overall system of SLUB using high-order allocations V2 James Bottomley
2011-05-13 15:52   ` Mel Gorman
2011-05-13 15:21 ` Christoph Lameter
2011-05-13 15:43   ` Mel Gorman [this message]
2011-05-14  8:34 ` Colin Ian King
2011-05-16  8:37   ` Mel Gorman
2011-05-16 11:24     ` Colin Ian King

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110513154322.GI3569@suse.de \
    --to=mgorman@suse.de \
    --cc=James.Bottomley@HansenPartnership.com \
    --cc=akpm@linux-foundation.org \
    --cc=chris.mason@oracle.com \
    --cc=cl@linux.com \
    --cc=colin.king@canonical.com \
    --cc=hannes@cmpxchg.org \
    --cc=jack@suse.cz \
    --cc=linux-ext4@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=penberg@kernel.org \
    --cc=raghu.prabhu13@gmail.com \
    --cc=riel@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).