From: Grant Likely <grant.likely@secretlab.ca>
To: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Cc: linux-kernel@vger.kernel.org,
Steven Rostedt <srostedt@redhat.com>,
David Brownell <dbrownell@users.sourceforge.net>
Subject: Re: [PATCH] gpio: add trace events for setting direction and value
Date: Thu, 19 May 2011 12:16:15 -0600 [thread overview]
Message-ID: <20110519181615.GB5109@ponder.secretlab.ca> (raw)
In-Reply-To: <1297875784-2302-1-git-send-email-u.kleine-koenig@pengutronix.de>
On Wed, Feb 16, 2011 at 06:03:04PM +0100, Uwe Kleine-König wrote:
> This patch allows to trace gpio operations using ftrace
>
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Applied, thanks.
g.
> ---
> Hello,
>
> two things that could be optimised later are:
>
> - combine gpio_direction_output into a single event?
> - record _cansleep?
>
> Best regards
> Uwe
>
> drivers/gpio/gpiolib.c | 18 ++++++++++++-
> include/trace/events/gpio.h | 56 +++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 72 insertions(+), 2 deletions(-)
> create mode 100644 include/trace/events/gpio.h
>
> diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
> index 649550e..5fc5e2d 100644
> --- a/drivers/gpio/gpiolib.c
> +++ b/drivers/gpio/gpiolib.c
> @@ -12,6 +12,8 @@
> #include <linux/idr.h>
> #include <linux/slab.h>
>
> +#define CREATE_TRACE_POINTS
> +#include <trace/events/gpio.h>
>
> /* Optional implementation infrastructure for GPIO interfaces.
> *
> @@ -1404,6 +1406,8 @@ int gpio_direction_input(unsigned gpio)
> status = chip->direction_input(chip, gpio);
> if (status == 0)
> clear_bit(FLAG_IS_OUT, &desc->flags);
> +
> + trace_gpio_direction(chip->base + gpio, 1, status);
> lose:
> return status;
> fail:
> @@ -1457,6 +1461,8 @@ int gpio_direction_output(unsigned gpio, int value)
> status = chip->direction_output(chip, gpio, value);
> if (status == 0)
> set_bit(FLAG_IS_OUT, &desc->flags);
> + trace_gpio_value(chip->base + gpio, 0, value);
> + trace_gpio_direction(chip->base + gpio, 0, status);
> lose:
> return status;
> fail:
> @@ -1546,10 +1552,13 @@ EXPORT_SYMBOL_GPL(gpio_set_debounce);
> int __gpio_get_value(unsigned gpio)
> {
> struct gpio_chip *chip;
> + int value;
>
> chip = gpio_to_chip(gpio);
> WARN_ON(chip->can_sleep);
> - return chip->get ? chip->get(chip, gpio - chip->base) : 0;
> + value = chip->get ? chip->get(chip, gpio - chip->base) : 0;
> + trace_gpio_value(gpio, 1, value);
> + return value;
> }
> EXPORT_SYMBOL_GPL(__gpio_get_value);
>
> @@ -1568,6 +1577,7 @@ void __gpio_set_value(unsigned gpio, int value)
>
> chip = gpio_to_chip(gpio);
> WARN_ON(chip->can_sleep);
> + trace_gpio_value(gpio, 0, value);
> chip->set(chip, gpio - chip->base, value);
> }
> EXPORT_SYMBOL_GPL(__gpio_set_value);
> @@ -1618,10 +1628,13 @@ EXPORT_SYMBOL_GPL(__gpio_to_irq);
> int gpio_get_value_cansleep(unsigned gpio)
> {
> struct gpio_chip *chip;
> + int value;
>
> might_sleep_if(extra_checks);
> chip = gpio_to_chip(gpio);
> - return chip->get ? chip->get(chip, gpio - chip->base) : 0;
> + value = chip->get ? chip->get(chip, gpio - chip->base) : 0;
> + trace_gpio_value(gpio, 1, value);
> + return value;
> }
> EXPORT_SYMBOL_GPL(gpio_get_value_cansleep);
>
> @@ -1631,6 +1644,7 @@ void gpio_set_value_cansleep(unsigned gpio, int value)
>
> might_sleep_if(extra_checks);
> chip = gpio_to_chip(gpio);
> + trace_gpio_value(gpio, 0, value);
> chip->set(chip, gpio - chip->base, value);
> }
> EXPORT_SYMBOL_GPL(gpio_set_value_cansleep);
> diff --git a/include/trace/events/gpio.h b/include/trace/events/gpio.h
> new file mode 100644
> index 0000000..927a8ad
> --- /dev/null
> +++ b/include/trace/events/gpio.h
> @@ -0,0 +1,56 @@
> +#undef TRACE_SYSTEM
> +#define TRACE_SYSTEM gpio
> +
> +#if !defined(_TRACE_GPIO_H) || defined(TRACE_HEADER_MULTI_READ)
> +#define _TRACE_GPIO_H
> +
> +#include <linux/tracepoint.h>
> +
> +TRACE_EVENT(gpio_direction,
> +
> + TP_PROTO(unsigned gpio, int in, int err),
> +
> + TP_ARGS(gpio, in, err),
> +
> + TP_STRUCT__entry(
> + __field(unsigned, gpio)
> + __field(int, in)
> + __field(int, err)
> + ),
> +
> + TP_fast_assign(
> + __entry->gpio = gpio;
> + __entry->in = in;
> + __entry->err = err;
> + ),
> +
> + TP_printk("%u %3s (%d)", __entry->gpio,
> + __entry->in ? "in" : "out", __entry->err)
> +);
> +
> +TRACE_EVENT(gpio_value,
> +
> + TP_PROTO(unsigned gpio, int get, int value),
> +
> + TP_ARGS(gpio, get, value),
> +
> + TP_STRUCT__entry(
> + __field(unsigned, gpio)
> + __field(int, get)
> + __field(int, value)
> + ),
> +
> + TP_fast_assign(
> + __entry->gpio = gpio;
> + __entry->get = get;
> + __entry->value = value;
> + ),
> +
> + TP_printk("%u %3s %d", __entry->gpio,
> + __entry->get ? "get" : "set", __entry->value)
> +);
> +
> +#endif /* if !defined(_TRACE_GPIO_H) || defined(TRACE_HEADER_MULTI_READ) */
> +
> +/* This part must be outside protection */
> +#include <trace/define_trace.h>
> --
> 1.7.2.3
>
prev parent reply other threads:[~2011-05-19 18:16 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-16 17:03 [PATCH] gpio: add trace events for setting direction and value Uwe Kleine-König
2011-02-16 17:12 ` Steven Rostedt
2011-02-18 9:58 ` Uwe Kleine-König
2011-02-18 15:48 ` Steven Rostedt
2011-03-02 22:03 ` Grant Likely
2011-04-26 15:04 ` Uwe Kleine-König
2011-05-19 18:16 ` Grant Likely [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110519181615.GB5109@ponder.secretlab.ca \
--to=grant.likely@secretlab.ca \
--cc=dbrownell@users.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=srostedt@redhat.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).