* Re: 3.0.0-rc2: Xen: High amount of kernel "reserved" memory, about 33% in 256MB DOMU
2011-06-13 21:59 ` Konrad Rzeszutek Wilk
@ 2011-06-14 0:10 ` Tobias Diedrich
2011-06-14 19:48 ` 3.0.0-rc2: Xen: High amount of kernel "reserved" memory, about 33% in 256MB DOMU [workaround included] Konrad Rzeszutek Wilk
2011-06-14 21:14 ` [Xen-users] 3.0.0-rc2: Xen: High amount of kernel "reserved" memory, about 33% in 256MB DOMU Tobias Diedrich
1 sibling, 1 reply; 6+ messages in thread
From: Tobias Diedrich @ 2011-06-14 0:10 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: xen-users, linux-kernel
Konrad Rzeszutek Wilk wrote:
> On Mon, Jun 13, 2011 at 10:50:03PM +0200, Tobias Diedrich wrote:
> > Hi,
> >
> > another issue I'm seeing with 3.0-rc2 and Xen is that there is an
> > unexpectedly high amount of kernel reserved memory.
>
> >
> > I suspect that Linux allocates page table entries and corresponding
> > data structures for the whole 6GB areas of the provided 'physical
> > RAM map' even though it has rather big unusable holes in it.
>
> Can you run it with 'memblock=debug debug loglevel=8 initcall_debug'?
> It should tell you where it tries (and for much space) the pagetables.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-rc2 (ranma@nukunuku) (gcc version 4.5.2 (Debian 4.5.2-11) ) #50 SMP Tue Jun 14 01:59:04 CEST 2011
[ 0.000000] Command line: root=/dev/md2 vga=ext netconsole=25360@85.10.200.103/eth0,514@217.160.215.119/00:26:88:75:cf:27 memblock=debug debug loglevel=8 initcall_debug ro
[ 0.000000] released 0 pages of unused memory
[ 0.000000] 1-1 mapping on 9f->100
[ 0.000000] 1-1 mapping on 7fef0->100000
[ 0.000000] Set 524657 page(s) to 1-1 mapping.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] Xen: 000000000009f000 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000010000000 (usable)
[ 0.000000] Xen: 0000000010000000 - 000000007fef0000 (unusable)
[ 0.000000] Xen: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
[ 0.000000] Xen: 000000007fef3000 - 000000007ff00000 (ACPI data)
[ 0.000000] Xen: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Xen: 0000000100000000 - 000000016fef0000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: MICRO-STAR INTERNATIONAL CO., LTD MS-7094/MS-7094, BIOS V3.6 10/12/2006
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ f0000000 old size 32 MB
[ 0.000000] Aperture from AGP @ f0000000 size 128 MB (APSIZE f20)
[ 0.000000] last_pfn = 0x16fef0 max_arch_pfn = 0x400000000
[ 0.000000] last_pfn = 0x10000 max_arch_pfn = 0x400000000
[ 0.000000] memblock_x86_reserve_range: [0x01ce8000-0x01d000b5] BRK
[ 0.000000] MEMBLOCK configuration:
[ 0.000000] memory size = 0x7fe7f000
[ 0.000000] memory.cnt = 0x3
[ 0.000000] memory[0x0] [0x00000000010000-0x0000000009efff], 0x8f000 bytes
[ 0.000000] memory[0x1] [0x00000000100000-0x0000000fffffff], 0xff00000 bytes
[ 0.000000] memory[0x2] [0x00000100000000-0x0000016feeffff], 0x6fef0000 bytes
[ 0.000000] reserved.cnt = 0x3
[ 0.000000] reserved[0x0] [0x00000001000000-0x00000001d000b5], 0xd000b6 bytes
[ 0.000000] reserved[0x1] [0x00000001e1e000-0x00000001eb1fff], 0x94000 bytes
[ 0.000000] reserved[0x2] [0x00000100000000-0x0000016feeffff], 0x6fef0000 bytes
[ 0.000000] initial memory mapped : 0 - 01e1e000
[ 0.000000] memblock_x86_reserve_range: [0x0009d000-0x0009efff] TRAMPOLINE
[ 0.000000] Base memory trampoline at [ffff88000009d000] 9d000 size 8192
[ 0.000000] init_memory_mapping: 0000000000000000-0000000010000000
[ 0.000000] 0000000000 - 0010000000 page 4k
[ 0.000000] kernel direct mapping tables up to 10000000 @ ff7e000-10000000
[ 0.000000] memblock_x86_reserve_range: [0x0ff7e000-0x0ffe9fff] PGTABLE
[ 0.000000] xen: setting RW the range ffea000 - 10000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000016fef0000
[ 0.000000] 0100000000 - 016fef0000 page 4k
[ 0.000000] kernel direct mapping tables up to 16fef0000 @ f3f7000-ff7e000
[ 0.000000] memblock_x86_reserve_range: [0x0f3f7000-0x0f778fff] PGTABLE
[ 0.000000] xen: setting RW the range f779000 - ff7e000
[ 0.000000] ACPI: RSDP 00000000000f8dc0 00014 (v00 VIAK8T)
[ 0.000000] ACPI: RSDT 000000007fef3040 00030 (v01 VIAK8T AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 000000007fef30c0 00074 (v01 VIAK8T AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 000000007fef3180 04F07 (v01 VIAK8T AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 000000007fef0000 00040
[ 0.000000] ACPI: SRAT 000000007fef8300 00090 (v01 AMD HAMMER 00000001 AMD 00000001)
[ 0.000000] ACPI: APIC 000000007fef8100 00068 (v01 VIAK8T AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] memblock_x86_reserve_range: [0x0ffff000-0x0fffffff] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fb7e000-0x0ff7dfff] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fffee80-0x0fffefff] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0f77e000-0x0fb7dfff] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0d200000-0x0f1fffff] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fffd000-0x0fffdfff] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fffc000-0x0fffcfff] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fffb000-0x0fffbfff] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fffa000-0x0fffafff] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fff9000-0x0fff9fff] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fff8000-0x0fff8fff] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fff7000-0x0fff7fff] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fff6000-0x0fff6fff] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fff5000-0x0fff5fff] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fff4000-0x0fff4fff] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fff3000-0x0fff3fff] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fff2000-0x0fff2fff] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fff1000-0x0fff1fff] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fff0000-0x0fff0fff] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0ffef000-0x0ffeffff] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0ffee000-0x0ffeefff] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0ffed000-0x0ffedfff] BOOTMEM
[ 0.000000] memblock_x86_free_range: [0x0ee00000-0x0f1fffff]
[ 0.000000] memblock_x86_free_range: [0x0f77e000-0x0fb7dfff]
[ 0.000000] memblock_x86_free_range: [0x0fb7e000-0x0ff7dfff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0016fef0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00010000
[ 0.000000] 0: 0x00100000 -> 0x0016fef0
[ 0.000000] On node 0 totalpages: 523903
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 2 pages reserved
[ 0.000000] DMA zone: 3925 pages, LIFO batch:0
[ 0.000000] memblock_x86_reserve_range: [0x0fffed00-0x0fffee7f] BOOTMEM
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 47160 pages, LIFO batch:15
[ 0.000000] memblock_x86_reserve_range: [0x0ff66000-0x0ff7dfff] BOOTMEM
[ 0.000000] Normal zone: 6269 pages used for memmap
[ 0.000000] Normal zone: 452211 pages, LIFO batch:31
[ 0.000000] memblock_x86_reserve_range: [0x0ff5a000-0x0ff65fff] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0ffec000-0x0ffecfff] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0ffeb000-0x0ffebfff] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0ffea000-0x0ffeafff] BOOTMEM
[ 0.000000] Looks like a VIA chipset. Disabling IOMMU. Override with iommu=allowed
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] BIOS bug: APIC version is 0 for CPU 0/0x0, fixing up to 0x10
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 255, address 0xfec00000, GSI 0-255
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] memblock_x86_reserve_range: [0x0fffec80-0x0fffecc2] BOOTMEM
[ 0.000000] nr_irqs_gsi: 272
[ 0.000000] memblock_x86_reserve_range: [0x0fffea80-0x0fffec77] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fffea00-0x0fffea67] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fffe980-0x0fffe9e7] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fffe900-0x0fffe967] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fffe880-0x0fffe8e7] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fffe800-0x0fffe867] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fffe780-0x0fffe7e7] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fffe700-0x0fffe767] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fffe680-0x0fffe6e7] BOOTMEM
[ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:7ed00000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.1.0 (preserve-AD)
[ 0.000000] memblock_x86_reserve_range: [0x0fffe5c0-0x0fffe651] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fffe500-0x0fffe591] BOOTMEM
[ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] memblock_x86_reserve_range: [0x0ff59000-0x0ff59fff] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0ff58000-0x0ff58fff] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0ff22000-0x0ff57fff] BOOTMEM
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88000ff22000 s79488 r8192 d22912 u110592
[ 0.000000] memblock_x86_reserve_range: [0x0fffe4c0-0x0fffe4c7] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fffe480-0x0fffe487] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fffe440-0x0fffe447] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fffe400-0x0fffe40f] BOOTMEM
[ 0.000000] pcpu-alloc: s79488 r8192 d22912 u110592 alloc=27*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] memblock_x86_reserve_range: [0x0fffe300-0x0fffe3ff] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fffe280-0x0fffe2c7] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fffe200-0x0fffe247] BOOTMEM
[ 0.000000] memblock_x86_free_range: [0x0ff59000-0x0ff59fff]
[ 0.000000] memblock_x86_free_range: [0x0ff58000-0x0ff58fff]
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 503296
[ 0.000000] Kernel command line: root=/dev/md2 vga=ext netconsole=25360@85.10.200.103/eth0,514@217.160.215.119/00:26:88:75:cf:27 memblock=debug debug loglevel=8 initcall_debug ro
[ 0.000000] memblock_x86_reserve_range: [0x0ff1a000-0x0ff21fff] BOOTMEM
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] memblock_x86_reserve_range: [0x0fd1a000-0x0ff19fff] BOOTMEM
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] memblock_x86_reserve_range: [0x0fc1a000-0x0fd19fff] BOOTMEM
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] memblock_x86_reserve_range: [0x09200000-0x0d1fffff] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fbfa000-0x0fc19fff] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fbba000-0x0fbf9fff] BOOTMEM
[ 0.000000] memblock_x86_reserve_range: [0x0fbb2000-0x0fbb9fff] BOOTMEM
[ 0.000000] Placing 64MB software IO TLB between ffff880009200000 - ffff88000d200000
[ 0.000000] software IO TLB at phys 0x9200000 - 0xd200000
[ 0.000000] Subtract (27 early reservations)
[ 0.000000] [000009d000-000009efff]
[ 0.000000] [0001000000-0001d000b5]
[ 0.000000] [0001e1e000-0001eb1fff]
[ 0.000000] [0009200000-000edfffff]
[ 0.000000] [000f3f7000-000f778fff]
[ 0.000000] [000fbb2000-000ff57fff]
[ 0.000000] [000ff5a000-000fffdfff]
[ 0.000000] [000fffe200-000fffe247]
[ 0.000000] [000fffe280-000fffe2c7]
[ 0.000000] [000fffe300-000fffe40f]
[ 0.000000] [000fffe440-000fffe447]
[ 0.000000] [000fffe480-000fffe487]
[ 0.000000] [000fffe4c0-000fffe4c7]
[ 0.000000] [000fffe500-000fffe591]
[ 0.000000] [000fffe5c0-000fffe651]
[ 0.000000] [000fffe680-000fffe6e7]
[ 0.000000] [000fffe700-000fffe767]
[ 0.000000] [000fffe780-000fffe7e7]
[ 0.000000] [000fffe800-000fffe867]
[ 0.000000] [000fffe880-000fffe8e7]
[ 0.000000] [000fffe900-000fffe967]
[ 0.000000] [000fffe980-000fffe9e7]
[ 0.000000] [000fffea00-000fffea67]
[ 0.000000] [000fffea80-000fffec77]
[ 0.000000] [000fffec80-000fffecc2]
[ 0.000000] [000fffed00-000fffffff]
[ 0.000000] [0100000000-016feeffff]
[ 0.000000] Memory: 145576k/6028224k available (6122k kernel code, 3932612k absent, 1950036k reserved, 4761k data, 576k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:320
[ 0.000000] xen: sci override: global_irq=9 trigger=0 polarity=1
[ 0.000000] xen: registering gsi 9 triggering 0 polarity 1
[ 0.000000] xen: --> pirq=9 -> irq=9
[ 0.000000] xen: acpi sci 9
[ 0.000000] xen: --> pirq=1 -> irq=1
[ 0.000000] xen: --> pirq=2 -> irq=2
[ 0.000000] xen: --> pirq=3 -> irq=3
[ 0.000000] xen: --> pirq=4 -> irq=4
[ 0.000000] xen: --> pirq=5 -> irq=5
[ 0.000000] xen: --> pirq=6 -> irq=6
[ 0.000000] xen: --> pirq=7 -> irq=7
[ 0.000000] xen: --> pirq=8 -> irq=8
[ 0.000000] xen_map_pirq_gsi: returning irq 9 for gsi 9
[ 0.000000] xen: --> pirq=9 -> irq=9
[ 0.000000] xen: --> pirq=10 -> irq=10
[ 0.000000] xen: --> pirq=11 -> irq=11
[ 0.000000] xen: --> pirq=12 -> irq=12
[ 0.000000] xen: --> pirq=13 -> irq=13
[ 0.000000] xen: --> pirq=14 -> irq=14
[ 0.000000] xen: --> pirq=15 -> irq=15
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] Detected 2199.838 MHz processor.
[ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.67 BogoMIPS (lpj=21998380)
[ 0.010000] pid_max: default: 32768 minimum: 301
[ 0.010000] Mount-cache hash table entries: 256
[ 0.010000] Initializing cgroup subsys cpuacct
[ 0.010000] Initializing cgroup subsys memory
[ 0.010000] Initializing cgroup subsys net_cls
[ 0.010000] Initializing cgroup subsys blkio
[ 0.010000] tseg: 007ff00000
[ 0.010000] SMP alternatives: switching to UP code
[ 0.010508] Freeing SMP alternatives: 28k freed
[ 0.010640] ACPI: Core revision 20110413
[ 0.019291] calling trace_init_flags_sys_exit+0x0/0x12 @ 1
[ 0.019414] initcall trace_init_flags_sys_exit+0x0/0x12 returned 0 after 0 usecs
[ 0.019611] calling trace_init_flags_sys_enter+0x0/0x12 @ 1
[ 0.019728] initcall trace_init_flags_sys_enter+0x0/0x12 returned 0 after 0 usecs
[ 0.019923] calling init_hw_perf_events+0x0/0xf1a @ 1
[ 0.020000] Performance Events: Broken PMU hardware detected, using software events only.
[ 0.020222] initcall init_hw_perf_events+0x0/0xf1a returned 0 after 9765 usecs
[ 0.020420] calling register_trigger_all_cpu_backtrace+0x0/0x14 @ 1
[ 0.020538] initcall register_trigger_all_cpu_backtrace+0x0/0x14 returned 0 after 0 usecs
[ 0.020737] calling migration_init+0x0/0x70 @ 1
[ 0.020854] initcall migration_init+0x0/0x70 returned 0 after 0 usecs
[ 0.020973] calling spawn_ksoftirqd+0x0/0x55 @ 1
[ 0.021117] initcall spawn_ksoftirqd+0x0/0x55 returned 0 after 0 usecs
[ 0.021235] calling init_workqueues+0x0/0x2ff @ 1
[ 0.021446] initcall init_workqueues+0x0/0x2ff returned 0 after 0 usecs
[ 0.021567] calling init_call_single_data+0x0/0x8c @ 1
[ 0.021682] initcall init_call_single_data+0x0/0x8c returned 0 after 0 usecs
[ 0.021800] calling cpu_stop_init+0x0/0xaa @ 1
[ 0.021939] initcall cpu_stop_init+0x0/0xaa returned 0 after 0 usecs
[ 0.022055] calling rcu_spawn_kthreads+0x0/0xc9 @ 1
[ 0.022220] initcall rcu_spawn_kthreads+0x0/0xc9 returned 0 after 0 usecs
[ 0.022337] calling relay_init+0x0/0x14 @ 1
[ 0.022450] initcall relay_init+0x0/0x14 returned 0 after 0 usecs
[ 0.022566] calling tracer_alloc_buffers+0x0/0x168 @ 1
[ 0.022732] initcall tracer_alloc_buffers+0x0/0x168 returned 0 after 0 usecs
[ 0.022850] calling init_trace_printk+0x0/0x12 @ 1
[ 0.022964] initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs
[ 0.023084] NMI watchdog disabled (cpu0): hardware events not enabled
[ 0.023225] Brought up 1 CPUs
[ 0.023482] devtmpfs: initialized
[ 0.023999] calling init_mmap_min_addr+0x0/0x16 @ 1
[ 0.024116] initcall init_mmap_min_addr+0x0/0x16 returned 0 after 0 usecs
[ 0.024233] calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1
[ 0.024354] initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs
[ 0.024551] calling net_ns_init+0x0/0x154 @ 1
[ 0.024669] initcall net_ns_init+0x0/0x154 returned 0 after 0 usecs
[ 0.024784] calling cpufreq_tsc+0x0/0x30 @ 1
[ 0.024898] initcall cpufreq_tsc+0x0/0x30 returned 0 after 0 usecs
[ 0.025014] calling pci_reboot_init+0x0/0x14 @ 1
[ 0.025129] initcall pci_reboot_init+0x0/0x14 returned 0 after 0 usecs
[ 0.025245] calling init_lapic_sysfs+0x0/0x20 @ 1
[ 0.025359] initcall init_lapic_sysfs+0x0/0x20 returned 0 after 0 usecs
[ 0.025475] calling init_smp_flush+0x0/0x2d @ 1
[ 0.025589] initcall init_smp_flush+0x0/0x2d returned 0 after 0 usecs
[ 0.025706] calling alloc_frozen_cpus+0x0/0x8 @ 1
[ 0.025819] initcall alloc_frozen_cpus+0x0/0x8 returned 0 after 0 usecs
[ 0.025934] calling sysctl_init+0x0/0x16 @ 1
[ 0.026050] initcall sysctl_init+0x0/0x16 returned 0 after 0 usecs
[ 0.026165] calling ksysfs_init+0x0/0x94 @ 1
[ 0.026283] initcall ksysfs_init+0x0/0x94 returned 0 after 0 usecs
[ 0.026398] calling init_jiffies_clocksource+0x0/0x12 @ 1
[ 0.026514] initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs
[ 0.026710] calling pm_init+0x0/0x63 @ 1
[ 0.029012] initcall pm_init+0x0/0x63 returned 0 after 0 usecs
[ 0.029128] calling init_zero_pfn+0x0/0x35 @ 1
[ 0.029241] initcall init_zero_pfn+0x0/0x35 returned 0 after 0 usecs
[ 0.029358] calling fsnotify_init+0x0/0x26 @ 1
[ 0.029474] initcall fsnotify_init+0x0/0x26 returned 0 after 0 usecs
[ 0.029590] calling filelock_init+0x0/0x2e @ 1
[ 0.029708] initcall filelock_init+0x0/0x2e returned 0 after 0 usecs
[ 0.029824] calling init_misc_binfmt+0x0/0x44 @ 1
[ 0.029939] initcall init_misc_binfmt+0x0/0x44 returned 0 after 0 usecs
[ 0.030000] calling init_script_binfmt+0x0/0x14 @ 1
[ 0.030000] initcall init_script_binfmt+0x0/0x14 returned 0 after 0 usecs
[ 0.030000] calling init_elf_binfmt+0x0/0x14 @ 1
[ 0.030000] initcall init_elf_binfmt+0x0/0x14 returned 0 after 0 usecs
[ 0.030000] calling init_compat_elf_binfmt+0x0/0x14 @ 1
[ 0.030000] initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after 0 usecs
[ 0.030000] calling debugfs_init+0x0/0x5c @ 1
[ 0.030000] initcall debugfs_init+0x0/0x5c returned 0 after 0 usecs
[ 0.030000] calling calibrate_xor_blocks+0x0/0xa0 @ 1
[ 0.030000] xor: automatically using best checksumming function: generic_sse
[ 0.070002] generic_sse: 2915.200 MB/sec
[ 0.070116] xor: using function: generic_sse (2915.200 MB/sec)
[ 0.070235] initcall calibrate_xor_blocks+0x0/0xa0 returned 0 after 48828 usecs
[ 0.070431] calling random32_init+0x0/0xd8 @ 1
[ 0.070545] initcall random32_init+0x0/0xd8 returned 0 after 0 usecs
[ 0.070663] calling __gnttab_init+0x0/0x21 @ 1
[ 0.070793] Grant table initialized
[ 0.070905] initcall __gnttab_init+0x0/0x21 returned 0 after 0 usecs
[ 0.071020] calling cpufreq_core_init+0x0/0xad @ 1
[ 0.071137] initcall cpufreq_core_init+0x0/0xad returned 0 after 0 usecs
[ 0.071255] calling cpuidle_init+0x0/0x40 @ 1
[ 0.071371] initcall cpuidle_init+0x0/0x40 returned 0 after 0 usecs
[ 0.071487] calling sock_init+0x0/0x83 @ 1
[ 0.071638] initcall sock_init+0x0/0x83 returned 0 after 0 usecs
[ 0.071754] calling netpoll_init+0x0/0x31 @ 1
[ 0.071868] initcall netpoll_init+0x0/0x31 returned 0 after 0 usecs
[ 0.071984] calling netlink_proto_init+0x0/0x1ad @ 1
[ 0.072111] NET: Registered protocol family 16
[ 0.072236] initcall netlink_proto_init+0x0/0x1ad returned 0 after 0 usecs
[ 0.072353] calling bdi_class_init+0x0/0x49 @ 1
[ 0.072537] initcall bdi_class_init+0x0/0x49 returned 0 after 0 usecs
[ 0.072655] calling kobject_uevent_init+0x0/0x21 @ 1
[ 0.072773] initcall kobject_uevent_init+0x0/0x21 returned 0 after 0 usecs
[ 0.072891] calling pcibus_class_init+0x0/0x19 @ 1
[ 0.073057] initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs
[ 0.073177] calling pci_driver_init+0x0/0x12 @ 1
[ 0.073345] initcall pci_driver_init+0x0/0x12 returned 0 after 0 usecs
[ 0.073464] calling xenbus_init+0x0/0x371 @ 1
[ 0.073649] initcall xenbus_init+0x0/0x371 returned 0 after 0 usecs
[ 0.073765] calling tty_class_init+0x0/0x34 @ 1
[ 0.073928] initcall tty_class_init+0x0/0x34 returned 0 after 0 usecs
[ 0.074046] calling vtconsole_class_init+0x0/0xeb @ 1
[ 0.074271] initcall vtconsole_class_init+0x0/0xeb returned 0 after 0 usecs
[ 0.074390] calling wakeup_sources_debugfs_init+0x0/0x2b @ 1
[ 0.074507] initcall wakeup_sources_debugfs_init+0x0/0x2b returned 0 after 0 usecs
[ 0.074702] calling i2c_init+0x0/0x6f @ 1
[ 0.074918] initcall i2c_init+0x0/0x6f returned 0 after 0 usecs
[ 0.075036] calling amd_postcore_init+0x0/0x150 @ 1
[ 0.075161] node 0 link 0: io port [1000, fffff]
[ 0.075277] TOM: 0000000080000000 aka 2048M
[ 0.075398] node 0 link 0: mmio [a0000, bffff]
[ 0.075542] node 0 link 0: mmio [80000000, ff70ffff]
[ 0.075687] bus: [00, ff] on node 0 link 0
[ 0.075802] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.075917] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.076032] bus: 00 index 2 [mem 0x80000000-0xfcffffffff]
[ 0.076148] initcall amd_postcore_init+0x0/0x150 returned 0 after 0 usecs
[ 0.076266] calling arch_kdebugfs_init+0x0/0x24 @ 1
[ 0.076384] initcall arch_kdebugfs_init+0x0/0x24 returned 0 after 0 usecs
[ 0.076502] calling configure_trampolines+0x0/0x29 @ 1
[ 0.076621] initcall configure_trampolines+0x0/0x29 returned 0 after 0 usecs
[ 0.076739] calling mtrr_if_init+0x0/0x64 @ 1
[ 0.076853] initcall mtrr_if_init+0x0/0x64 returned -19 after 0 usecs
[ 0.076972] calling ffh_cstate_init+0x0/0x2a @ 1
[ 0.077087] initcall ffh_cstate_init+0x0/0x2a returned -1 after 0 usecs
[ 0.077206] initcall ffh_cstate_init+0x0/0x2a returned with error code -1
[ 0.077323] calling acpi_pci_init+0x0/0x61 @ 1
[ 0.077436] ACPI: bus type pci registered
[ 0.077551] initcall acpi_pci_init+0x0/0x61 returned 0 after 0 usecs
[ 0.077667] calling setup_vcpu_hotplug_event+0x0/0x22 @ 1
[ 0.077783] initcall setup_vcpu_hotplug_event+0x0/0x22 returned 0 after 0 usecs
[ 0.077979] calling register_xen_pci_notifier+0x0/0x31 @ 1
[ 0.078096] initcall register_xen_pci_notifier+0x0/0x31 returned 0 after 0 usecs
[ 0.078291] calling dmi_id_init+0x0/0x30e @ 1
[ 0.078532] initcall dmi_id_init+0x0/0x30e returned 0 after 0 usecs
[ 0.078650] calling pci_arch_init+0x0/0x69 @ 1
[ 0.078782] PCI: Using configuration type 1 for base access
[ 0.078908] initcall pci_arch_init+0x0/0x69 returned 0 after 0 usecs
[ 0.079025] calling topology_init+0x0/0x40 @ 1
[ 0.079188] initcall topology_init+0x0/0x40 returned 0 after 0 usecs
[ 0.079305] calling mtrr_init_finialize+0x0/0x36 @ 1
[ 0.079422] initcall mtrr_init_finialize+0x0/0x36 returned 0 after 0 usecs
[ 0.079540] calling init_vdso_vars+0x0/0xf8 @ 1
[ 0.079661] initcall init_vdso_vars+0x0/0xf8 returned 0 after 0 usecs
[ 0.079778] calling sysenter_setup+0x0/0x2c8 @ 1
[ 0.079897] initcall sysenter_setup+0x0/0x2c8 returned 0 after 0 usecs
[ 0.080000] calling param_sysfs_init+0x0/0x1b4 @ 1
[ 0.090988] initcall param_sysfs_init+0x0/0x1b4 returned 0 after 19531 usecs
[ 0.091118] calling pm_sysrq_init+0x0/0x19 @ 1
[ 0.091234] initcall pm_sysrq_init+0x0/0x19 returned 0 after 0 usecs
[ 0.091351] calling default_bdi_init+0x0/0xa9 @ 1
[ 0.091622] initcall default_bdi_init+0x0/0xa9 returned 0 after 0 usecs
[ 0.091740] calling init_bio+0x0/0xe5 @ 1
[ 0.091879] bio: create slab <bio-0> at 0
[ 0.092001] initcall init_bio+0x0/0xe5 returned 0 after 0 usecs
[ 0.092116] calling fsnotify_notification_init+0x0/0x8b @ 1
[ 0.092242] initcall fsnotify_notification_init+0x0/0x8b returned 0 after 0 usecs
[ 0.092438] calling cryptomgr_init+0x0/0x12 @ 1
[ 0.092552] initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs
[ 0.092668] calling blk_settings_init+0x0/0x2a @ 1
[ 0.092782] initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs
[ 0.092900] calling blk_ioc_init+0x0/0x2a @ 1
[ 0.093017] initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs
[ 0.093133] calling blk_softirq_init+0x0/0x6e @ 1
[ 0.093249] initcall blk_softirq_init+0x0/0x6e returned 0 after 0 usecs
[ 0.093366] calling blk_iopoll_setup+0x0/0x6e @ 1
[ 0.093481] initcall blk_iopoll_setup+0x0/0x6e returned 0 after 0 usecs
[ 0.093599] calling genhd_device_init+0x0/0x7c @ 1
[ 0.093818] initcall genhd_device_init+0x0/0x7c returned 0 after 0 usecs
[ 0.093938] calling raid6_select_algo+0x0/0x1bd @ 1
[ 0.260022] raid6: int64x1 2044 MB/s
[ 0.430003] raid6: int64x2 2403 MB/s
[ 0.600006] raid6: int64x4 1709 MB/s
[ 0.770032] raid6: int64x8 1243 MB/s
[ 0.940004] raid6: sse2x1 2440 MB/s
[ 1.110013] raid6: sse2x2 3178 MB/s
[ 1.280007] raid6: sse2x4 3705 MB/s
[ 1.280120] raid6: using algorithm sse2x4 (3705 MB/s)
[ 1.280237] initcall raid6_select_algo+0x0/0x1bd returned 0 after 1162109 usecs
[ 1.280435] calling pci_slot_init+0x0/0x46 @ 1
[ 1.280551] initcall pci_slot_init+0x0/0x46 returned 0 after 0 usecs
[ 1.280668] calling acpi_init+0x0/0xb6 @ 1
[ 1.283139] ACPI: EC: Look up EC in DSDT
[ 1.295082] ACPI: Interpreter enabled
[ 1.295202] ACPI: (supports S0 S5)
[ 1.295388] ACPI: Using IOAPIC for interrupt routing
[ 1.305848] initcall acpi_init+0x0/0xb6 returned 0 after 19531 usecs
[ 1.305968] calling dock_init+0x0/0xa5 @ 1
[ 1.306336] ACPI: No dock devices found.
[ 1.306451] initcall dock_init+0x0/0xa5 returned 0 after 0 usecs
[ 1.306569] calling acpi_pci_root_init+0x0/0x28 @ 1
[ 1.306684] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 1.307001] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 1.307392] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 1.307589] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 1.307784] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 1.307981] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 1.308178] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
[ 1.308405] pci 0000:00:00.0: [1106:0282] type 0 class 0x000600
[ 1.308532] pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[ 1.308774] pci 0000:00:00.1: [1106:1282] type 0 class 0x000600
[ 1.308964] pci 0000:00:00.2: [1106:2282] type 0 class 0x000600
[ 1.309153] pci 0000:00:00.3: [1106:3282] type 0 class 0x000600
[ 1.309343] pci 0000:00:00.4: [1106:4282] type 0 class 0x000600
[ 1.309537] pci 0000:00:00.7: [1106:7282] type 0 class 0x000600
[ 1.309732] pci 0000:00:01.0: [1106:b188] type 1 class 0x000604
[ 1.309922] pci 0000:00:01.0: supports D1
[ 1.310024] pci 0000:00:09.0: [10ec:8139] type 0 class 0x000200
[ 1.310165] pci 0000:00:09.0: reg 10: [io 0xe000-0xe0ff]
[ 1.310293] pci 0000:00:09.0: reg 14: [mem 0xfc122000-0xfc1220ff]
[ 1.310472] pci 0000:00:09.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 1.310619] pci 0000:00:09.0: supports D1 D2
[ 1.310731] pci 0000:00:09.0: PME# supported from D1 D2 D3hot D3cold
[ 1.310851] pci 0000:00:09.0: PME# disabled
[ 1.311003] pci 0000:00:0f.0: [1106:3149] type 0 class 0x000104
[ 1.311145] pci 0000:00:0f.0: reg 10: [io 0xe200-0xe207]
[ 1.311273] pci 0000:00:0f.0: reg 14: [io 0xe300-0xe303]
[ 1.311401] pci 0000:00:0f.0: reg 18: [io 0xe400-0xe407]
[ 1.311529] pci 0000:00:0f.0: reg 1c: [io 0xe500-0xe503]
[ 1.313837] pci 0000:00:0f.0: reg 20: [io 0xe600-0xe60f]
[ 1.313964] pci 0000:00:0f.0: reg 24: [io 0xe700-0xe7ff]
[ 1.314153] pci 0000:00:0f.1: [1106:0571] type 0 class 0x000101
[ 1.314348] pci 0000:00:0f.1: reg 20: [io 0xe800-0xe80f]
[ 1.314563] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
[ 1.314754] pci 0000:00:10.0: reg 20: [io 0xe900-0xe91f]
[ 1.314924] pci 0000:00:10.0: supports D1 D2
[ 1.315037] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.315157] pci 0000:00:10.0: PME# disabled
[ 1.315299] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
[ 1.315492] pci 0000:00:10.1: reg 20: [io 0xea00-0xea1f]
[ 1.315663] pci 0000:00:10.1: supports D1 D2
[ 1.315775] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.315895] pci 0000:00:10.1: PME# disabled
[ 1.316036] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
[ 1.316229] pci 0000:00:10.2: reg 20: [io 0xeb00-0xeb1f]
[ 1.316399] pci 0000:00:10.2: supports D1 D2
[ 1.316512] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.316631] pci 0000:00:10.2: PME# disabled
[ 1.316773] pci 0000:00:10.3: [1106:3038] type 0 class 0x000c03
[ 1.316964] pci 0000:00:10.3: reg 20: [io 0xec00-0xec1f]
[ 1.317133] pci 0000:00:10.3: supports D1 D2
[ 1.317247] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.317366] pci 0000:00:10.3: PME# disabled
[ 1.317508] pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03
[ 1.317649] pci 0000:00:10.4: reg 10: [mem 0xfc121000-0xfc1210ff]
[ 1.317867] pci 0000:00:10.4: supports D1 D2
[ 1.317981] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.318100] pci 0000:00:10.4: PME# disabled
[ 1.318247] pci 0000:00:11.0: [1106:3227] type 0 class 0x000601
[ 1.318466] HPET not enabled in BIOS. You might try hpet=force boot option
[ 1.318659] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 1.318842] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 1.319010] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 1.319178] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 1.319355] PCI: peer root bus 00 res updated from pci conf
[ 1.319532] pci 0000:01:00.0: [1002:5046] type 0 class 0x000300
[ 1.319672] pci 0000:01:00.0: reg 10: [mem 0xf8000000-0xfbffffff pref]
[ 1.319799] pci 0000:01:00.0: reg 14: [io 0xd000-0xd0ff]
[ 1.319925] pci 0000:01:00.0: reg 18: [mem 0xfc020000-0xfc023fff]
[ 1.320000] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 1.320014] pci 0000:01:00.0: supports D1
[ 1.320192] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.320309] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 1.320429] pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfc0fffff]
[ 1.320549] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff pref]
[ 1.320755] pci_bus 0000:00: on NUMA node 0
[ 1.320869] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.321609] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 1.378242] initcall acpi_pci_root_init+0x0/0x28 returned 0 after 68359 usecs
[ 1.378363] calling acpi_pci_link_init+0x0/0x3e @ 1
[ 1.378641] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[ 1.379178] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[ 1.379724] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 *12)
[ 1.380118] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 1.380752] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 1.381379] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 1.382004] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 1.382629] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 1.383315] ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
[ 1.383684] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
[ 1.384054] ACPI: PCI Interrupt Link [ALKC] (IRQs *22), disabled.
[ 1.384502] ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled.
[ 1.384801] initcall acpi_pci_link_init+0x0/0x3e returned 0 after 9765 usecs
[ 1.384919] calling pnp_init+0x0/0x12 @ 1
[ 1.385090] initcall pnp_init+0x0/0x12 returned 0 after 0 usecs
[ 1.385209] calling xen_setup_shutdown_event+0x0/0x22 @ 1
[ 1.385327] initcall xen_setup_shutdown_event+0x0/0x22 returned 0 after 0 usecs
[ 1.385523] calling balloon_init+0x0/0x130 @ 1
[ 1.385636] xen/balloon: Initialising balloon driver.
[ 1.385751] last_pfn = 0x16fef0 max_arch_pfn = 0x400000000
[ 1.399622] initcall balloon_init+0x0/0x130 returned 0 after 9765 usecs
[ 1.399746] calling xenbus_probe_backend_init+0x0/0x2d @ 1
[ 1.400000] initcall xenbus_probe_backend_init+0x0/0x2d returned 0 after 0 usecs
[ 1.400000] calling xenbus_probe_frontend_init+0x0/0x2d @ 1
[ 1.400056] initcall xenbus_probe_frontend_init+0x0/0x2d returned 0 after 9765 usecs
[ 1.400253] calling balloon_init+0x0/0x100 @ 1
[ 1.400367] xen-balloon: Initialising balloon driver.
[ 1.400584] initcall balloon_init+0x0/0x100 returned 0 after 0 usecs
[ 1.400701] calling misc_init+0x0/0xb7 @ 1
[ 1.400876] initcall misc_init+0x0/0xb7 returned 0 after 0 usecs
[ 1.400993] calling vga_arb_device_init+0x0/0xe4 @ 1
[ 1.401217] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.401413] vgaarb: loaded
[ 1.401523] vgaarb: bridge control possible 0000:01:00.0
[ 1.401639] initcall vga_arb_device_init+0x0/0xe4 returned 0 after 0 usecs
[ 1.401756] calling init_scsi+0x0/0x7c @ 1
[ 1.402126] SCSI subsystem initialized
[ 1.402241] initcall init_scsi+0x0/0x7c returned 0 after 0 usecs
[ 1.402358] calling ata_init+0x0/0x349 @ 1
[ 1.402655] libata version 3.00 loaded.
[ 1.402770] initcall ata_init+0x0/0x349 returned 0 after 0 usecs
[ 1.402890] calling usb_init+0x0/0x15f @ 1
[ 1.403126] usbcore: registered new interface driver usbfs
[ 1.403344] usbcore: registered new interface driver hub
[ 1.403534] usbcore: registered new device driver usb
[ 1.403651] initcall usb_init+0x0/0x15f returned 0 after 0 usecs
[ 1.403767] calling serio_init+0x0/0x31 @ 1
[ 1.403933] initcall serio_init+0x0/0x31 returned 0 after 0 usecs
[ 1.404050] calling input_init+0x0/0x10c @ 1
[ 1.404218] initcall input_init+0x0/0x10c returned 0 after 0 usecs
[ 1.404336] calling rtc_init+0x0/0x6a @ 1
[ 1.404498] initcall rtc_init+0x0/0x6a returned 0 after 0 usecs
[ 1.404615] calling power_supply_class_init+0x0/0x40 @ 1
[ 1.404778] initcall power_supply_class_init+0x0/0x40 returned 0 after 0 usecs
[ 1.404974] calling hwmon_init+0x0/0xee @ 1
[ 1.405138] initcall hwmon_init+0x0/0xee returned 0 after 0 usecs
[ 1.405257] calling md_init+0x0/0x144 @ 1
[ 1.405405] initcall md_init+0x0/0x144 returned 0 after 0 usecs
[ 1.405521] calling init_soundcore+0x0/0x34 @ 1
[ 1.405690] initcall init_soundcore+0x0/0x34 returned 0 after 0 usecs
[ 1.405807] calling alsa_sound_init+0x0/0x90 @ 1
[ 1.405935] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 1.406053] initcall alsa_sound_init+0x0/0x90 returned 0 after 0 usecs
[ 1.406169] calling pci_subsys_init+0x0/0x4d @ 1
[ 1.406282] PCI: Using ACPI for IRQ routing
[ 1.406396] PCI: pci_cache_line_size set to 64 bytes
[ 1.406628] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 1.406667] reserve RAM buffer: 000000016fef0000 - 000000016fffffff
[ 1.406811] initcall pci_subsys_init+0x0/0x4d returned 0 after 0 usecs
[ 1.407032] calling proto_init+0x0/0x12 @ 1
[ 1.407149] initcall proto_init+0x0/0x12 returned 0 after 0 usecs
[ 1.407266] calling net_dev_init+0x0/0x1d9 @ 1
[ 1.407652] initcall net_dev_init+0x0/0x1d9 returned 0 after 0 usecs
[ 1.407771] calling neigh_init+0x0/0x71 @ 1
[ 1.407886] initcall neigh_init+0x0/0x71 returned 0 after 0 usecs
[ 1.408002] calling fib_rules_init+0x0/0xa6 @ 1
[ 1.408116] initcall fib_rules_init+0x0/0xa6 returned 0 after 0 usecs
[ 1.408233] calling pktsched_init+0x0/0xed @ 1
[ 1.408351] initcall pktsched_init+0x0/0xed returned 0 after 0 usecs
[ 1.408468] calling tc_filter_init+0x0/0x4c @ 1
[ 1.408583] initcall tc_filter_init+0x0/0x4c returned 0 after 0 usecs
[ 1.408699] calling tc_action_init+0x0/0x4c @ 1
[ 1.408813] initcall tc_action_init+0x0/0x4c returned 0 after 0 usecs
[ 1.408930] calling genl_init+0x0/0x93 @ 1
[ 1.409056] initcall genl_init+0x0/0x93 returned 0 after 0 usecs
[ 1.409174] calling sysctl_init+0x0/0x48 @ 1
[ 1.409290] initcall sysctl_init+0x0/0x48 returned 0 after 0 usecs
[ 1.409407] calling print_ICs+0x0/0x510 @ 1
[ 1.409520] initcall print_ICs+0x0/0x510 returned 0 after 0 usecs
[ 1.409637] calling hpet_late_init+0x0/0xf4 @ 1
[ 1.409753] initcall hpet_late_init+0x0/0xf4 returned -19 after 0 usecs
[ 1.409870] calling init_amd_nbs+0x0/0xba @ 1
[ 1.410000] initcall init_amd_nbs+0x0/0xba returned 0 after 0 usecs
[ 1.410000] calling clocksource_done_booting+0x0/0x5a @ 1
[ 1.410000] Switching to clocksource xen
[ 1.410015] initcall clocksource_done_booting+0x0/0x5a returned 0 after 9769 usecs
[ 1.410213] calling rb_init_debugfs+0x0/0x2f @ 1
[ 1.410332] initcall rb_init_debugfs+0x0/0x2f returned 0 after 4 usecs
[ 1.410448] calling tracer_init_debugfs+0x0/0x36b @ 1
[ 1.410632] initcall tracer_init_debugfs+0x0/0x36b returned 0 after 67 usecs
[ 1.410749] calling init_trace_printk_function_export+0x0/0x2f @ 1
[ 1.410868] initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 1 usecs
[ 1.411063] calling event_trace_init+0x0/0x2bd @ 1
[ 1.416385] initcall event_trace_init+0x0/0x2bd returned 0 after 5078 usecs
[ 1.416515] calling init_pipe_fs+0x0/0x4c @ 1
[ 1.416653] initcall init_pipe_fs+0x0/0x4c returned 0 after 23 usecs
[ 1.416770] calling eventpoll_init+0x0/0xda @ 1
[ 1.416904] initcall eventpoll_init+0x0/0xda returned 0 after 20 usecs
[ 1.417021] calling anon_inode_init+0x0/0x12e @ 1
[ 1.417146] initcall anon_inode_init+0x0/0x12e returned 0 after 10 usecs
[ 1.417264] calling blk_scsi_ioctl_init+0x0/0x289 @ 1
[ 1.417380] initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after 0 usecs
[ 1.417498] calling acpi_event_init+0x0/0x52 @ 1
[ 1.417624] initcall acpi_event_init+0x0/0x52 returned 0 after 11 usecs
[ 1.417741] calling pnp_system_init+0x0/0x12 @ 1
[ 1.420073] Switched to NOHz mode on CPU #0
[ 1.420317] initcall pnp_system_init+0x0/0x12 returned 0 after 272 usecs
[ 1.420437] calling pnpacpi_init+0x0/0x8c @ 1
[ 1.420549] pnp: PnP ACPI init
[ 1.420677] ACPI: bus type pnp registered
[ 1.421171] pnp 00:00: [mem 0x000d1c00-0x000d3fff]
[ 1.421287] pnp 00:00: [mem 0x000f0000-0x000f7fff]
[ 1.421400] pnp 00:00: [mem 0x000f8000-0x000fbfff]
[ 1.421515] pnp 00:00: [mem 0x000fc000-0x000fffff]
[ 1.421629] pnp 00:00: [mem 0x7ff00000-0x7fffffff]
[ 1.421742] pnp 00:00: [mem 0x7fef0000-0x7fefffff]
[ 1.421858] pnp 00:00: [mem 0xffff0000-0xffffffff]
[ 1.421972] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 1.422085] pnp 00:00: [mem 0x00100000-0x7feeffff]
[ 1.422200] pnp 00:00: [mem 0xfec00000-0xfec00fff]
[ 1.422315] pnp 00:00: [mem 0xfee00000-0xfee00fff]
[ 1.422430] pnp 00:00: [mem 0xfff80000-0xfffeffff]
[ 1.422665] system 00:00: [mem 0x000d1c00-0x000d3fff] could not be reserved
[ 1.422787] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 1.422905] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 1.423023] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
[ 1.423142] system 00:00: [mem 0x7ff00000-0x7fffffff] has been reserved
[ 1.423261] system 00:00: [mem 0x7fef0000-0x7fefffff] could not be reserved
[ 1.423379] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[ 1.423498] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.423617] system 00:00: [mem 0x00100000-0x7feeffff] could not be reserved
[ 1.423735] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.423853] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.423970] system 00:00: [mem 0xfff80000-0xfffeffff] has been reserved
[ 1.424090] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.424347] pnp 00:01: [bus 00-ff]
[ 1.424460] pnp 00:01: [io 0x0cf8-0x0cff]
[ 1.424574] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 1.424689] pnp 00:01: [io 0x0d00-0xffff window]
[ 1.424804] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 1.424920] pnp 00:01: [mem 0x000c0000-0x000dffff window]
[ 1.425036] pnp 00:01: [mem 0x80000000-0xfebfffff window]
[ 1.425267] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 1.425421] pnp 00:02: [io 0x4000-0x407f]
[ 1.425534] pnp 00:02: [io 0x5000-0x500f]
[ 1.425739] system 00:02: [io 0x4000-0x407f] has been reserved
[ 1.425857] system 00:02: [io 0x5000-0x500f] has been reserved
[ 1.425974] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.427373] pnp 00:03: [io 0x0010-0x001f]
[ 1.427488] pnp 00:03: [io 0x0022-0x003f]
[ 1.427601] pnp 00:03: [io 0x0044-0x005f]
[ 1.427712] pnp 00:03: [io 0x0062-0x0063]
[ 1.427826] pnp 00:03: [io 0x0065-0x006f]
[ 1.427939] pnp 00:03: [io 0x0074-0x007f]
[ 1.428052] pnp 00:03: [io 0x0091-0x0093]
[ 1.428164] pnp 00:03: [io 0x00a2-0x00bf]
[ 1.428278] pnp 00:03: [io 0x00e0-0x00ef]
[ 1.428392] pnp 00:03: [io 0x0b78-0x0b7b]
[ 1.428505] pnp 00:03: [io 0x0f78-0x0f7b]
[ 1.428617] pnp 00:03: [io 0x0a78-0x0a7b]
[ 1.428730] pnp 00:03: [io 0x0e78-0x0e7b]
[ 1.428843] pnp 00:03: [io 0x0bbc-0x0bbf]
[ 1.428959] pnp 00:03: [io 0x0fbc-0x0fbf]
[ 1.429073] pnp 00:03: [io 0x04d0-0x04d1]
[ 1.429187] pnp 00:03: [io 0x0290-0x0297]
[ 1.429425] system 00:03: [io 0x0b78-0x0b7b] has been reserved
[ 1.429544] system 00:03: [io 0x0f78-0x0f7b] has been reserved
[ 1.429661] system 00:03: [io 0x0a78-0x0a7b] has been reserved
[ 1.429778] system 00:03: [io 0x0e78-0x0e7b] has been reserved
[ 1.429895] system 00:03: [io 0x0bbc-0x0bbf] has been reserved
[ 1.430012] system 00:03: [io 0x0fbc-0x0fbf] has been reserved
[ 1.430058] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 1.430058] system 00:03: [io 0x0290-0x0297] has been reserved
[ 1.430058] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.430504] pnp 00:04: [dma 4]
[ 1.430618] pnp 00:04: [io 0x0000-0x000f]
[ 1.430733] pnp 00:04: [io 0x0080-0x0090]
[ 1.430849] pnp 00:04: [io 0x0094-0x009f]
[ 1.430963] pnp 00:04: [io 0x00c0-0x00df]
[ 1.431164] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.431300] pnp 00:05: [io 0x0070-0x0073]
[ 1.431415] xen: registering gsi 8 triggering 1 polarity 0
[ 1.431529] xen_map_pirq_gsi: returning irq 8 for gsi 8
[ 1.431642] xen: --> pirq=8 -> irq=8
[ 1.431764] pnp 00:05: [irq 8]
[ 1.431961] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.432092] pnp 00:06: [io 0x0061]
[ 1.432295] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 1.432428] pnp 00:07: [io 0x00f0-0x00ff]
[ 1.432543] xen: registering gsi 13 triggering 1 polarity 0
[ 1.432659] xen_map_pirq_gsi: returning irq 13 for gsi 13
[ 1.432774] xen: --> pirq=13 -> irq=13
[ 1.432890] pnp 00:07: [irq 13]
[ 1.433098] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.433428] pnp 00:08: [io 0x03f0-0x03f5]
[ 1.433543] pnp 00:08: [io 0x03f7]
[ 1.433655] xen: registering gsi 6 triggering 1 polarity 0
[ 1.433771] xen_map_pirq_gsi: returning irq 6 for gsi 6
[ 1.433886] xen: --> pirq=6 -> irq=6
[ 1.434001] pnp 00:08: [irq 6]
[ 1.434112] pnp 00:08: [dma 2]
[ 1.434333] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[ 1.434765] pnp 00:09: [io 0x03f8-0x03ff]
[ 1.434880] xen: registering gsi 4 triggering 1 polarity 0
[ 1.434993] xen_map_pirq_gsi: returning irq 4 for gsi 4
[ 1.435108] xen: --> pirq=4 -> irq=4
[ 1.435223] pnp 00:09: [irq 4]
[ 1.435465] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.435928] pnp 00:0a: [io 0x02f8-0x02ff]
[ 1.436042] xen: registering gsi 3 triggering 1 polarity 0
[ 1.436157] xen_map_pirq_gsi: returning irq 3 for gsi 3
[ 1.436270] xen: --> pirq=3 -> irq=3
[ 1.436385] pnp 00:0a: [irq 3]
[ 1.436628] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.437323] pnp 00:0b: [io 0x0378-0x037f]
[ 1.437436] pnp 00:0b: [io 0x0778-0x077b]
[ 1.437550] xen: registering gsi 7 triggering 1 polarity 0
[ 1.437664] xen_map_pirq_gsi: returning irq 7 for gsi 7
[ 1.437778] xen: --> pirq=7 -> irq=7
[ 1.437894] pnp 00:0b: [irq 7]
[ 1.438130] pnp 00:0b: Plug and Play ACPI device, IDs PNP0400 (active)
[ 1.438414] pnp 00:0c: [io 0x0060]
[ 1.438526] pnp 00:0c: [io 0x0064]
[ 1.438638] xen: registering gsi 1 triggering 1 polarity 0
[ 1.438753] xen_map_pirq_gsi: returning irq 1 for gsi 1
[ 1.438866] xen: --> pirq=1 -> irq=1
[ 1.438983] pnp 00:0c: [irq 1]
[ 1.439190] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 1.439424] pnp: PnP ACPI: found 13 devices
[ 1.439536] ACPI: ACPI bus type pnp unregistered
[ 1.439651] initcall pnpacpi_init+0x0/0x8c returned 0 after 18651 usecs
[ 1.439768] calling chr_dev_init+0x0/0xc1 @ 1
[ 1.445245] initcall chr_dev_init+0x0/0xc1 returned 0 after 5230 usecs
[ 1.445371] calling firmware_class_init+0x0/0x19 @ 1
[ 1.445547] initcall firmware_class_init+0x0/0x19 returned 0 after 58 usecs
[ 1.445666] calling thermal_init+0x0/0x75 @ 1
[ 1.445836] initcall thermal_init+0x0/0x75 returned 0 after 54 usecs
[ 1.445955] calling cpufreq_gov_performance_init+0x0/0x12 @ 1
[ 1.446071] initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 0 usecs
[ 1.446268] calling init_acpi_pm_clocksource+0x0/0xe0 @ 1
[ 1.450316] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ 1.450435] initcall init_acpi_pm_clocksource+0x0/0xe0 returned -19 after 3956 usecs
[ 1.450634] calling pcibios_assign_resources+0x0/0x74 @ 1
[ 1.450773] PCI: max bus depth: 1 pci_try_num: 2
[ 1.450909] pci 0000:00:09.0: BAR 6: assigned [mem 0x80000000-0x8000ffff pref]
[ 1.451109] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref]
[ 1.451305] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.451421] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 1.451543] pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfc0fffff]
[ 1.451663] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff pref]
[ 1.451876] pci 0000:00:01.0: setting latency timer to 64
[ 1.451993] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 1.452110] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 1.452225] pci_bus 0000:00: resource 6 [mem 0x80000000-0xfcffffffff]
[ 1.452341] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 1.452455] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[ 1.452572] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[ 1.452689] initcall pcibios_assign_resources+0x0/0x74 returned 0 after 1893 usecs
[ 1.452884] calling sysctl_core_init+0x0/0x38 @ 1
[ 1.453005] initcall sysctl_core_init+0x0/0x38 returned 0 after 7 usecs
[ 1.453122] calling inet_init+0x0/0x286 @ 1
[ 1.453279] NET: Registered protocol family 2
[ 1.453454] IP route cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 1.453779] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.454564] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.455322] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.455443] TCP reno registered
[ 1.455557] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 1.455693] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 1.455972] initcall inet_init+0x0/0x286 returned 0 after 2668 usecs
[ 1.456092] calling af_unix_init+0x0/0x55 @ 1
[ 1.456210] NET: Registered protocol family 1
[ 1.456329] initcall af_unix_init+0x0/0x55 returned 0 after 120 usecs
[ 1.456447] calling init_sunrpc+0x0/0x73 @ 1
[ 1.456716] RPC: Registered named UNIX socket transport module.
[ 1.456834] RPC: Registered udp transport module.
[ 1.456948] RPC: Registered tcp transport module.
[ 1.459247] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.459366] initcall init_sunrpc+0x0/0x73 returned 0 after 2736 usecs
[ 1.459483] calling pci_apply_final_quirks+0x0/0x106 @ 1
[ 1.459630] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 1.459914] pci 0000:01:00.0: Boot video device
[ 1.460031] PCI: CLS 32 bytes, default 64
[ 1.460063] initcall pci_apply_final_quirks+0x0/0x106 returned 0 after 534 usecs
[ 1.460063] calling populate_rootfs+0x0/0x9e @ 1
[ 1.460542] initcall populate_rootfs+0x0/0x9e returned 0 after 79 usecs
[ 1.460661] calling pci_iommu_init+0x0/0x41 @ 1
[ 1.460776] initcall pci_iommu_init+0x0/0x41 returned 0 after 0 usecs
[ 1.460893] calling irqfd_module_init+0x0/0x31 @ 1
[ 1.461079] initcall irqfd_module_init+0x0/0x31 returned 0 after 68 usecs
[ 1.461197] calling svm_init+0x0/0x1e @ 1
[ 1.461313] has_svm: svm not available
[ 1.461425] kvm: no hardware support
[ 1.461538] initcall svm_init+0x0/0x1e returned -95 after 221 usecs
[ 1.461656] initcall svm_init+0x0/0x1e returned with error code -95
[ 1.461772] calling i8259A_init_ops+0x0/0x21 @ 1
[ 1.461886] initcall i8259A_init_ops+0x0/0x21 returned 0 after 0 usecs
[ 1.462003] calling vsyscall_init+0x0/0x66 @ 1
[ 1.462121] initcall vsyscall_init+0x0/0x66 returned 0 after 3 usecs
[ 1.462237] calling sbf_init+0x0/0xe9 @ 1
[ 1.462349] initcall sbf_init+0x0/0xe9 returned 0 after 0 usecs
[ 1.462465] calling init_tsc_clocksource+0x0/0x5f @ 1
[ 1.462585] initcall init_tsc_clocksource+0x0/0x5f returned 0 after 1 usecs
[ 1.462703] calling add_rtc_cmos+0x0/0x97 @ 1
[ 1.462819] initcall add_rtc_cmos+0x0/0x97 returned 0 after 2 usecs
[ 1.462935] calling i8237A_init_ops+0x0/0x14 @ 1
[ 1.463049] initcall i8237A_init_ops+0x0/0x14 returned 0 after 0 usecs
[ 1.463168] calling cache_sysfs_init+0x0/0x64 @ 1
[ 1.463535] initcall cache_sysfs_init+0x0/0x64 returned 0 after 246 usecs
[ 1.463654] calling mcheck_init_device+0x0/0x100 @ 1
[ 1.463771] initcall mcheck_init_device+0x0/0x100 returned -5 after 0 usecs
[ 1.463889] initcall mcheck_init_device+0x0/0x100 returned with error code -5
[ 1.464086] calling threshold_init_device+0x0/0x4f @ 1
[ 1.464202] initcall threshold_init_device+0x0/0x4f returned 0 after 0 usecs
[ 1.464320] calling thermal_throttle_init_device+0x0/0x9b @ 1
[ 1.464437] initcall thermal_throttle_init_device+0x0/0x9b returned 0 after 0 usecs
[ 1.464635] calling ioapic_init_ops+0x0/0x14 @ 1
[ 1.464750] initcall ioapic_init_ops+0x0/0x14 returned 0 after 0 usecs
[ 1.464868] calling add_pcspkr+0x0/0x3a @ 1
[ 1.465050] initcall add_pcspkr+0x0/0x3a returned 0 after 65 usecs
[ 1.465167] calling aes_init+0x0/0x12 @ 1
[ 1.465321] initcall aes_init+0x0/0x12 returned 0 after 37 usecs
[ 1.465437] calling init+0x0/0x12 @ 1
[ 1.465582] initcall init+0x0/0x12 returned 0 after 30 usecs
[ 1.465698] calling ia32_binfmt_init+0x0/0x14 @ 1
[ 1.465814] initcall ia32_binfmt_init+0x0/0x14 returned 0 after 1 usecs
[ 1.465930] calling init_sched_debug_procfs+0x0/0x2c @ 1
[ 1.466049] initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 4 usecs
[ 1.466243] calling proc_schedstat_init+0x0/0x22 @ 1
[ 1.466359] initcall proc_schedstat_init+0x0/0x22 returned 0 after 1 usecs
[ 1.466475] calling proc_execdomains_init+0x0/0x22 @ 1
[ 1.466592] initcall proc_execdomains_init+0x0/0x22 returned 0 after 1 usecs
[ 1.466709] calling ioresources_init+0x0/0x3c @ 1
[ 1.466826] initcall ioresources_init+0x0/0x3c returned 0 after 3 usecs
[ 1.466942] calling uid_cache_init+0x0/0x8d @ 1
[ 1.467061] initcall uid_cache_init+0x0/0x8d returned 0 after 6 usecs
[ 1.467180] calling init_posix_timers+0x0/0x1cf @ 1
[ 1.467300] initcall init_posix_timers+0x0/0x1cf returned 0 after 5 usecs
[ 1.467416] calling init_posix_cpu_timers+0x0/0xbf @ 1
[ 1.467531] initcall init_posix_cpu_timers+0x0/0xbf returned 0 after 0 usecs
[ 1.467648] calling nsproxy_cache_init+0x0/0x2d @ 1
[ 1.467768] initcall nsproxy_cache_init+0x0/0x2d returned 0 after 5 usecs
[ 1.467885] calling timekeeping_init_ops+0x0/0x14 @ 1
[ 1.468001] initcall timekeeping_init_ops+0x0/0x14 returned 0 after 0 usecs
[ 1.468117] calling init_clocksource_sysfs+0x0/0x50 @ 1
[ 1.468332] initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 97 usecs
[ 1.468529] calling init_timer_list_procfs+0x0/0x2c @ 1
[ 1.468647] initcall init_timer_list_procfs+0x0/0x2c returned 0 after 2 usecs
[ 1.468764] calling alarmtimer_init+0x0/0x147 @ 1
[ 1.468991] initcall alarmtimer_init+0x0/0x147 returned 0 after 108 usecs
[ 1.469111] calling init_tstats_procfs+0x0/0x2c @ 1
[ 1.469228] initcall init_tstats_procfs+0x0/0x2c returned 0 after 2 usecs
[ 1.469346] calling futex_init+0x0/0x5d @ 1
[ 1.469467] initcall futex_init+0x0/0x5d returned 0 after 7 usecs
[ 1.469583] calling proc_dma_init+0x0/0x22 @ 1
[ 1.469700] initcall proc_dma_init+0x0/0x22 returned 0 after 2 usecs
[ 1.469819] calling proc_modules_init+0x0/0x22 @ 1
[ 1.469936] initcall proc_modules_init+0x0/0x22 returned 0 after 2 usecs
[ 1.470055] calling kallsyms_init+0x0/0x25 @ 1
[ 1.470171] initcall kallsyms_init+0x0/0x25 returned 0 after 1 usecs
[ 1.470288] calling ikconfig_init+0x0/0x3a @ 1
[ 1.470405] initcall ikconfig_init+0x0/0x3a returned 0 after 1 usecs
[ 1.470472] calling hung_task_init+0x0/0x56 @ 1
[ 1.470672] initcall hung_task_init+0x0/0x56 returned 0 after 32 usecs
[ 1.470790] calling utsname_sysctl_init+0x0/0x14 @ 1
[ 1.470907] initcall utsname_sysctl_init+0x0/0x14 returned 0 after 1 usecs
[ 1.471024] calling init_tracepoints+0x0/0x12 @ 1
[ 1.471140] initcall init_tracepoints+0x0/0x12 returned 0 after 0 usecs
[ 1.471257] calling init_lstats_procfs+0x0/0x25 @ 1
[ 1.471373] initcall init_lstats_procfs+0x0/0x25 returned 0 after 2 usecs
[ 1.471491] calling init_events+0x0/0x61 @ 1
[ 1.471609] initcall init_events+0x0/0x61 returned 0 after 3 usecs
[ 1.471726] calling init_mmio_trace+0x0/0x12 @ 1
[ 1.471842] initcall init_mmio_trace+0x0/0x12 returned 0 after 0 usecs
[ 1.471958] calling init_blk_tracer+0x0/0x55 @ 1
[ 1.472073] initcall init_blk_tracer+0x0/0x55 returned 0 after 0 usecs
[ 1.472190] calling perf_event_sysfs_init+0x0/0x93 @ 1
[ 1.472537] initcall perf_event_sysfs_init+0x0/0x93 returned 0 after 224 usecs
[ 1.472734] calling init_per_zone_wmark_min+0x0/0x88 @ 1
[ 1.473665] initcall init_per_zone_wmark_min+0x0/0x88 returned 0 after 793 usecs
[ 1.473866] calling kswapd_init+0x0/0x20 @ 1
[ 1.474038] initcall kswapd_init+0x0/0x20 returned 0 after 56 usecs
[ 1.474157] calling extfrag_debug_init+0x0/0x7b @ 1
[ 1.474282] initcall extfrag_debug_init+0x0/0x7b returned 0 after 10 usecs
[ 1.474399] calling setup_vmstat+0x0/0xc0 @ 1
[ 1.474531] initcall setup_vmstat+0x0/0xc0 returned 0 after 17 usecs
[ 1.474647] calling mm_sysfs_init+0x0/0x29 @ 1
[ 1.474767] initcall mm_sysfs_init+0x0/0x29 returned 0 after 5 usecs
[ 1.474884] calling proc_vmalloc_init+0x0/0x25 @ 1
[ 1.475000] initcall proc_vmalloc_init+0x0/0x25 returned 0 after 2 usecs
[ 1.475116] calling procswaps_init+0x0/0x22 @ 1
[ 1.475233] initcall procswaps_init+0x0/0x22 returned 0 after 2 usecs
[ 1.475350] calling hugetlb_init+0x0/0x3db @ 1
[ 1.475464] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.475590] initcall hugetlb_init+0x0/0x3db returned 0 after 123 usecs
[ 1.475708] calling slab_proc_init+0x0/0x25 @ 1
[ 1.475824] initcall slab_proc_init+0x0/0x25 returned 0 after 2 usecs
[ 1.475939] calling cpucache_init+0x0/0x40 @ 1
[ 1.476053] initcall cpucache_init+0x0/0x40 returned 0 after 0 usecs
[ 1.476169] calling hugepage_init+0x0/0x12a @ 1
[ 1.476282] initcall hugepage_init+0x0/0x12a returned -22 after 0 usecs
[ 1.476400] initcall hugepage_init+0x0/0x12a returned with error code -22
[ 1.476516] calling init_cleancache+0x0/0x1b @ 1
[ 1.476633] initcall init_cleancache+0x0/0x1b returned 0 after 3 usecs
[ 1.476750] calling fcntl_init+0x0/0x2a @ 1
[ 1.476879] initcall fcntl_init+0x0/0x2a returned 0 after 15 usecs
[ 1.476995] calling proc_filesystems_init+0x0/0x22 @ 1
[ 1.477112] initcall proc_filesystems_init+0x0/0x22 returned 0 after 2 usecs
[ 1.477228] calling fsnotify_mark_init+0x0/0x40 @ 1
[ 1.477373] initcall fsnotify_mark_init+0x0/0x40 returned 0 after 28 usecs
[ 1.477489] calling dnotify_init+0x0/0x7b @ 1
[ 1.477611] initcall dnotify_init+0x0/0x7b returned 0 after 9 usecs
[ 1.477726] calling inotify_user_setup+0x0/0x70 @ 1
[ 1.477850] initcall inotify_user_setup+0x0/0x70 returned 0 after 10 usecs
[ 1.477966] calling aio_setup+0x0/0x78 @ 1
[ 1.478092] initcall aio_setup+0x0/0x78 returned 0 after 13 usecs
[ 1.478207] calling proc_locks_init+0x0/0x22 @ 1
[ 1.478325] initcall proc_locks_init+0x0/0x22 returned 0 after 2 usecs
[ 1.478442] calling init_sys32_ioctl+0x0/0x28 @ 1
[ 1.478643] initcall init_sys32_ioctl+0x0/0x28 returned 0 after 85 usecs
[ 1.478759] calling init_mbcache+0x0/0x14 @ 1
[ 1.478874] initcall init_mbcache+0x0/0x14 returned 0 after 0 usecs
[ 1.478990] calling proc_cmdline_init+0x0/0x22 @ 1
[ 1.479106] initcall proc_cmdline_init+0x0/0x22 returned 0 after 2 usecs
[ 1.479229] calling proc_consoles_init+0x0/0x22 @ 1
[ 1.479346] initcall proc_consoles_init+0x0/0x22 returned 0 after 2 usecs
[ 1.479462] calling proc_cpuinfo_init+0x0/0x22 @ 1
[ 1.479581] initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 2 usecs
[ 1.479698] calling proc_devices_init+0x0/0x22 @ 1
[ 1.479814] initcall proc_devices_init+0x0/0x22 returned 0 after 2 usecs
[ 1.479930] calling proc_interrupts_init+0x0/0x22 @ 1
[ 1.480046] initcall proc_interrupts_init+0x0/0x22 returned 0 after 2 usecs
[ 1.480165] calling proc_loadavg_init+0x0/0x22 @ 1
[ 1.480281] initcall proc_loadavg_init+0x0/0x22 returned 0 after 1 usecs
[ 1.480397] calling proc_meminfo_init+0x0/0x22 @ 1
[ 1.480512] initcall proc_meminfo_init+0x0/0x22 returned 0 after 1 usecs
[ 1.480629] calling proc_stat_init+0x0/0x22 @ 1
[ 1.480641] initcall proc_stat_init+0x0/0x22 returned 0 after 1 usecs
[ 1.480641] calling proc_uptime_init+0x0/0x22 @ 1
[ 1.480641] initcall proc_uptime_init+0x0/0x22 returned 0 after 1 usecs
[ 1.480641] calling proc_version_init+0x0/0x22 @ 1
[ 1.480641] initcall proc_version_init+0x0/0x22 returned 0 after 1 usecs
[ 1.480641] calling proc_softirqs_init+0x0/0x22 @ 1
[ 1.480641] initcall proc_softirqs_init+0x0/0x22 returned 0 after 1 usecs
[ 1.480641] calling proc_kcore_init+0x0/0xa9 @ 1
[ 1.480641] initcall proc_kcore_init+0x0/0xa9 returned 0 after 4 usecs
[ 1.480641] calling proc_kmsg_init+0x0/0x25 @ 1
[ 1.481926] initcall proc_kmsg_init+0x0/0x25 returned 0 after 22 usecs
[ 1.482044] calling proc_page_init+0x0/0x42 @ 1
[ 1.482165] initcall proc_page_init+0x0/0x42 returned 0 after 4 usecs
[ 1.484463] calling configfs_init+0x0/0xb3 @ 1
[ 1.484597] initcall configfs_init+0x0/0xb3 returned 0 after 17 usecs
[ 1.484714] calling init_devpts_fs+0x0/0x4c @ 1
[ 1.484844] initcall init_devpts_fs+0x0/0x4c returned 0 after 15 usecs
[ 1.484961] calling init_ext3_fs+0x0/0x6f @ 1
[ 1.485089] initcall init_ext3_fs+0x0/0x6f returned 0 after 12 usecs
[ 1.485206] calling init_ext2_fs+0x0/0x6f @ 1
[ 1.485335] initcall init_ext2_fs+0x0/0x6f returned 0 after 13 usecs
[ 1.485453] calling ext4_init_fs+0x0/0x20c @ 1
[ 1.485621] initcall ext4_init_fs+0x0/0x20c returned 0 after 49 usecs
[ 1.485739] calling journal_init+0x0/0x97 @ 1
[ 1.485877] initcall journal_init+0x0/0x97 returned 0 after 20 usecs
[ 1.485994] calling journal_init+0x0/0x104 @ 1
[ 1.486136] initcall journal_init+0x0/0x104 returned 0 after 25 usecs
[ 1.486253] calling init_squashfs_fs+0x0/0x66 @ 1
[ 1.486373] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.486492] initcall init_squashfs_fs+0x0/0x66 returned 0 after 120 usecs
[ 1.486609] calling init_ramfs_fs+0x0/0x12 @ 1
[ 1.486726] initcall init_ramfs_fs+0x0/0x12 returned 0 after 0 usecs
[ 1.486843] calling init_hugetlbfs_fs+0x0/0x98 @ 1
[ 1.486987] initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 28 usecs
[ 1.487106] calling init_fat_fs+0x0/0x4f @ 1
[ 1.487231] initcall init_fat_fs+0x0/0x4f returned 0 after 9 usecs
[ 1.487347] calling init_vfat_fs+0x0/0x12 @ 1
[ 1.487462] initcall init_vfat_fs+0x0/0x12 returned 0 after 1 usecs
[ 1.487579] calling init_iso9660_fs+0x0/0x5c @ 1
[ 1.487700] initcall init_iso9660_fs+0x0/0x5c returned 0 after 5 usecs
[ 1.487818] calling init_nfs_fs+0x0/0x10e @ 1
[ 1.488048] initcall init_nfs_fs+0x0/0x10e returned 0 after 111 usecs
[ 1.488165] calling init_nfsd+0x0/0xbb @ 1
[ 1.488278] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 1.488694] initcall init_nfsd+0x0/0xbb returned 0 after 404 usecs
[ 1.488810] calling init_nlm+0x0/0x22 @ 1
[ 1.488925] initcall init_nlm+0x0/0x22 returned 0 after 1 usecs
[ 1.489041] calling init_nls_cp437+0x0/0x12 @ 1
[ 1.489157] initcall init_nls_cp437+0x0/0x12 returned 0 after 0 usecs
[ 1.489276] calling init_nls_cp850+0x0/0x12 @ 1
[ 1.489391] initcall init_nls_cp850+0x0/0x12 returned 0 after 0 usecs
[ 1.489508] calling init_nls_cp932+0x0/0x12 @ 1
[ 1.489622] initcall init_nls_cp932+0x0/0x12 returned 0 after 0 usecs
[ 1.489740] calling init_nls_euc_jp+0x0/0x48 @ 1
[ 1.489856] initcall init_nls_euc_jp+0x0/0x48 returned 0 after 0 usecs
[ 1.489975] calling init_nls_iso8859_1+0x0/0x12 @ 1
[ 1.490091] initcall init_nls_iso8859_1+0x0/0x12 returned 0 after 0 usecs
[ 1.490207] calling init_nls_iso8859_15+0x0/0x12 @ 1
[ 1.490322] initcall init_nls_iso8859_15+0x0/0x12 returned 0 after 0 usecs
[ 1.490439] calling init_nls_utf8+0x0/0x29 @ 1
[ 1.490554] initcall init_nls_utf8+0x0/0x29 returned 0 after 0 usecs
[ 1.490670] calling init_ntfs_fs+0x0/0x1d1 @ 1
[ 1.490783] NTFS driver 2.1.30 [Flags: R/W].
[ 1.490931] initcall init_ntfs_fs+0x0/0x1d1 returned 0 after 143 usecs
[ 1.491048] calling init_autofs4_fs+0x0/0x26 @ 1
[ 1.491274] initcall init_autofs4_fs+0x0/0x26 returned 0 after 108 usecs
[ 1.491391] calling fuse_init+0x0/0x141 @ 1
[ 1.491503] fuse init (API version 7.16)
[ 1.491702] initcall fuse_init+0x0/0x141 returned 0 after 193 usecs
[ 1.491820] calling init_udf_fs+0x0/0x5c @ 1
[ 1.491942] initcall init_udf_fs+0x0/0x5c returned 0 after 6 usecs
[ 1.492057] calling init_xfs_fs+0x0/0xa9 @ 1
[ 1.492170] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[ 1.492597] initcall init_xfs_fs+0x0/0xa9 returned 0 after 414 usecs
[ 1.492716] calling ipc_init+0x0/0x23 @ 1
[ 1.492831] msgmni has been set to 284
[ 1.492950] initcall ipc_init+0x0/0x23 returned 0 after 117 usecs
[ 1.493066] calling ipc_sysctl_init+0x0/0x14 @ 1
[ 1.493182] initcall ipc_sysctl_init+0x0/0x14 returned 0 after 1 usecs
[ 1.493298] calling key_proc_init+0x0/0x33 @ 1
[ 1.493414] initcall key_proc_init+0x0/0x33 returned 0 after 2 usecs
[ 1.493530] calling crypto_wq_init+0x0/0x31 @ 1
[ 1.493673] initcall crypto_wq_init+0x0/0x31 returned 0 after 27 usecs
[ 1.493791] calling crypto_algapi_init+0x0/0xd @ 1
[ 1.493908] initcall crypto_algapi_init+0x0/0xd returned 0 after 3 usecs
[ 1.494025] calling skcipher_module_init+0x0/0x36 @ 1
[ 1.494141] initcall skcipher_module_init+0x0/0x36 returned 0 after 0 usecs
[ 1.494259] calling chainiv_module_init+0x0/0x12 @ 1
[ 1.494376] initcall chainiv_module_init+0x0/0x12 returned 0 after 0 usecs
[ 1.494492] calling eseqiv_module_init+0x0/0x12 @ 1
[ 1.494607] initcall eseqiv_module_init+0x0/0x12 returned 0 after 0 usecs
[ 1.494725] calling seqiv_module_init+0x0/0x12 @ 1
[ 1.494841] initcall seqiv_module_init+0x0/0x12 returned 0 after 0 usecs
[ 1.494957] calling hmac_module_init+0x0/0x12 @ 1
[ 1.495070] initcall hmac_module_init+0x0/0x12 returned 0 after 0 usecs
[ 1.495189] calling md5_mod_init+0x0/0x12 @ 1
[ 1.495343] initcall md5_mod_init+0x0/0x12 returned 0 after 37 usecs
[ 1.495459] calling sha1_generic_mod_init+0x0/0x12 @ 1
[ 1.495608] initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 33 usecs
[ 1.495726] calling sha256_generic_mod_init+0x0/0x3f @ 1
[ 1.495905] initcall sha256_generic_mod_init+0x0/0x3f returned 0 after 62 usecs
[ 1.496101] calling crypto_cbc_module_init+0x0/0x12 @ 1
[ 1.496216] initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 0 usecs
[ 1.496335] calling crypto_ctr_module_init+0x0/0x3e @ 1
[ 1.496450] initcall crypto_ctr_module_init+0x0/0x3e returned 0 after 0 usecs
[ 1.496566] calling cryptd_init+0x0/0xc5 @ 1
[ 1.496683] initcall cryptd_init+0x0/0xc5 returned 0 after 3 usecs
[ 1.496798] calling des_generic_mod_init+0x0/0x3f @ 1
[ 1.496977] initcall des_generic_mod_init+0x0/0x3f returned 0 after 62 usecs
[ 1.497094] calling blowfish_mod_init+0x0/0x12 @ 1
[ 1.497240] initcall blowfish_mod_init+0x0/0x12 returned 0 after 31 usecs
[ 1.497357] calling aes_init+0x0/0x12 @ 1
[ 1.497502] initcall aes_init+0x0/0x12 returned 0 after 30 usecs
[ 1.497617] calling krng_mod_init+0x0/0x12 @ 1
[ 1.497763] initcall krng_mod_init+0x0/0x12 returned 0 after 31 usecs
[ 1.497880] calling async_pq_init+0x0/0x44 @ 1
[ 1.497995] initcall async_pq_init+0x0/0x44 returned 0 after 1 usecs
[ 1.498112] calling proc_genhd_init+0x0/0x3c @ 1
[ 1.498231] initcall proc_genhd_init+0x0/0x3c returned 0 after 5 usecs
[ 1.498347] calling init_cgroup_blkio+0x0/0x12 @ 1
[ 1.498462] initcall init_cgroup_blkio+0x0/0x12 returned 0 after 0 usecs
[ 1.498578] calling throtl_init+0x0/0x44 @ 1
[ 1.498719] initcall throtl_init+0x0/0x44 returned 0 after 25 usecs
[ 1.498836] calling noop_init+0x0/0x14 @ 1
[ 1.498948] io scheduler noop registered
[ 1.499062] initcall noop_init+0x0/0x14 returned 0 after 111 usecs
[ 1.499179] calling deadline_init+0x0/0x14 @ 1
[ 1.499292] io scheduler deadline registered
[ 1.499405] initcall deadline_init+0x0/0x14 returned 0 after 109 usecs
[ 1.499521] calling cfq_init+0x0/0xb3 @ 1
[ 1.499646] io scheduler cfq registered (default)
[ 1.499762] initcall cfq_init+0x0/0xb3 returned 0 after 124 usecs
[ 1.499877] calling init_kmp+0x0/0x12 @ 1
[ 1.499992] initcall init_kmp+0x0/0x12 returned 0 after 0 usecs
[ 1.500109] calling init_bm+0x0/0x12 @ 1
[ 1.500222] initcall init_bm+0x0/0x12 returned 0 after 0 usecs
[ 1.500336] calling init_fsm+0x0/0x12 @ 1
[ 1.500450] initcall init_fsm+0x0/0x12 returned 0 after 0 usecs
[ 1.500565] calling percpu_counter_startup+0x0/0x19 @ 1
[ 1.500680] initcall percpu_counter_startup+0x0/0x19 returned 0 after 0 usecs
[ 1.500799] calling pci_proc_init+0x0/0x6b @ 1
[ 1.500993] initcall pci_proc_init+0x0/0x6b returned 0 after 78 usecs
[ 1.501111] calling pcie_portdrv_init+0x0/0x7a @ 1
[ 1.501363] initcall pcie_portdrv_init+0x0/0x7a returned 0 after 132 usecs
[ 1.501480] calling aer_service_init+0x0/0x22 @ 1
[ 1.501642] initcall aer_service_init+0x0/0x22 returned 0 after 46 usecs
[ 1.501759] calling pcie_pme_service_init+0x0/0x12 @ 1
[ 1.501923] initcall pcie_pme_service_init+0x0/0x12 returned 0 after 47 usecs
[ 1.502041] calling ioapic_init+0x0/0x1b @ 1
[ 1.502212] initcall ioapic_init+0x0/0x1b returned 0 after 55 usecs
[ 1.502330] calling pcifront_init+0x0/0x5c @ 1
[ 1.502444] initcall pcifront_init+0x0/0x5c returned -19 after 0 usecs
[ 1.502560] calling acpi_reserve_resources+0x0/0xeb @ 1
[ 1.502679] initcall acpi_reserve_resources+0x0/0xeb returned 0 after 4 usecs
[ 1.502796] calling irqrouter_init_ops+0x0/0x26 @ 1
[ 1.502912] initcall irqrouter_init_ops+0x0/0x26 returned 0 after 0 usecs
[ 1.503030] calling acpi_button_init+0x0/0x12 @ 1
[ 1.503263] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.503463] ACPI: Power Button [PWRB]
[ 1.503701] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.503897] ACPI: Power Button [PWRF]
[ 1.504069] initcall acpi_button_init+0x0/0x12 returned 0 after 901 usecs
[ 1.504188] calling acpi_fan_init+0x0/0x18 @ 1
[ 1.504355] initcall acpi_fan_init+0x0/0x18 returned 0 after 51 usecs
[ 1.504474] calling acpi_pci_slot_init+0x0/0x20 @ 1
[ 1.504931] initcall acpi_pci_slot_init+0x0/0x20 returned 0 after 335 usecs
[ 1.505048] calling acpi_processor_init+0x0/0xcd @ 1
[ 1.505162] ACPI: acpi_idle registered with cpuidle
[ 1.505471] initcall acpi_processor_init+0x0/0xcd returned 0 after 300 usecs
[ 1.505589] calling acpi_container_init+0x0/0x4a @ 1
[ 1.509054] initcall acpi_container_init+0x0/0x4a returned 0 after 3269 usecs
[ 1.509172] calling acpi_thermal_init+0x0/0x42 @ 1
[ 1.509350] initcall acpi_thermal_init+0x0/0x42 returned 0 after 60 usecs
[ 1.509468] calling xenbus_probe_initcall+0x0/0x3b @ 1
[ 1.509584] initcall xenbus_probe_initcall+0x0/0x3b returned 0 after 0 usecs
[ 1.509704] calling xen_tmem_init+0x0/0x5c @ 1
[ 1.509818] initcall xen_tmem_init+0x0/0x5c returned 0 after 0 usecs
[ 1.509935] calling evtchn_init+0x0/0x6e @ 1
[ 1.510180] Event-channel device installed.
[ 1.510294] initcall evtchn_init+0x0/0x6e returned 0 after 238 usecs
[ 1.510412] calling xenfs_init+0x0/0x2d @ 1
[ 1.510529] initcall xenfs_init+0x0/0x2d returned 0 after 3 usecs
[ 1.510646] calling hypervisor_subsys_init+0x0/0x25 @ 1
[ 1.510762] initcall hypervisor_subsys_init+0x0/0x25 returned 0 after 0 usecs
[ 1.510879] calling hyper_sysfs_init+0x0/0xbf @ 1
[ 1.511006] initcall hyper_sysfs_init+0x0/0xbf returned 0 after 12 usecs
[ 1.511122] calling pty_init+0x0/0x26a @ 1
[ 1.511331] initcall pty_init+0x0/0x26a returned 0 after 92 usecs
[ 1.511446] calling sysrq_init+0x0/0x68 @ 1
[ 1.513746] initcall sysrq_init+0x0/0x68 returned 0 after 6 usecs
[ 1.513864] calling xen_hvc_init+0x0/0x144 @ 1
[ 1.514566] initcall xen_hvc_init+0x0/0x144 returned 0 after 572 usecs
[ 1.514684] calling serial8250_init+0x0/0x18e @ 1
[ 1.514799] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 1.520093] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.535996] initcall serial8250_init+0x0/0x18e returned 0 after 20698 usecs
[ 1.536114] calling serial8250_pnp_init+0x0/0x12 @ 1
[ 1.545863] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.557484] serial 00:0a: disabled
[ 1.557664] initcall serial8250_pnp_init+0x0/0x12 returned 0 after 20931 usecs
[ 1.557861] calling serial8250_pci_init+0x0/0x1b @ 1
[ 1.558065] initcall serial8250_pci_init+0x0/0x1b returned 0 after 85 usecs
[ 1.558185] calling rand_initialize+0x0/0x2c @ 1
[ 1.558321] initcall rand_initialize+0x0/0x2c returned 0 after 21 usecs
[ 1.558439] calling hpet_init+0x0/0x6a @ 1
[ 1.558683] initcall hpet_init+0x0/0x6a returned 0 after 126 usecs
[ 1.558802] calling topology_sysfs_init+0x0/0x50 @ 1
[ 1.558924] initcall topology_sysfs_init+0x0/0x50 returned 0 after 6 usecs
[ 1.559041] calling loop_init+0x0/0x231 @ 1
[ 1.560627] loop: module loaded
[ 1.560741] initcall loop_init+0x0/0x231 returned 0 after 1547 usecs
[ 1.560858] calling init_cryptoloop+0x0/0x2f @ 1
[ 1.560972] initcall init_cryptoloop+0x0/0x2f returned 0 after 0 usecs
[ 1.561089] calling xlblk_init+0x0/0x81 @ 1
[ 1.561257] initcall xlblk_init+0x0/0x81 returned 0 after 51 usecs
[ 1.561374] calling xen_blkif_init+0x0/0x276 @ 1
[ 1.562142] initcall xen_blkif_init+0x0/0x276 returned 0 after 638 usecs
[ 1.562260] calling init_sd+0x0/0x112 @ 1
[ 1.562492] initcall init_sd+0x0/0x112 returned 0 after 113 usecs
[ 1.562610] calling init_sr+0x0/0x46 @ 1
[ 1.562773] initcall init_sr+0x0/0x46 returned 0 after 48 usecs
[ 1.562891] calling init_sg+0x0/0xc7 @ 1
[ 1.563055] initcall init_sg+0x0/0xc7 returned 0 after 48 usecs
[ 1.563171] calling ahci_init+0x0/0x1b @ 1
[ 1.563363] initcall ahci_init+0x0/0x1b returned 0 after 74 usecs
[ 1.563481] calling piix_init+0x0/0x29 @ 1
[ 1.563657] initcall piix_init+0x0/0x29 returned 0 after 60 usecs
[ 1.563774] calling mv_init+0x0/0x45 @ 1
[ 1.563998] initcall mv_init+0x0/0x45 returned 0 after 106 usecs
[ 1.564117] calling nv_init+0x0/0x1b @ 1
[ 1.564290] initcall nv_init+0x0/0x1b returned 0 after 57 usecs
[ 1.564408] calling svia_init+0x0/0x1b @ 1
[ 1.564531] sata_via 0000:00:0f.0: version 2.6
[ 1.564891] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 1.565008] xen: registering gsi 20 triggering 0 polarity 1
[ 1.565129] xen: --> pirq=20 -> irq=20
[ 1.565251] sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[ 1.565502] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 1.566207] scsi0 : sata_via
[ 1.566498] scsi1 : sata_via
[ 1.566744] ata1: SATA max UDMA/133 cmd 0xe200 ctl 0xe300 bmdma 0xe600 irq 20
[ 1.566864] ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe500 bmdma 0xe608 irq 20
[ 1.567009] calling 1_async_port_probe+0x0/0x4a @ 5
[ 1.567172] calling 2_async_port_probe+0x0/0x4a @ 12
[ 1.567288] async_waiting @ 12
[ 1.567467] initcall svia_init+0x0/0x1b returned 0 after 2876 usecs
[ 1.567585] calling amd_init+0x0/0x1b @ 1
[ 1.567759] initcall amd_init+0x0/0x1b returned 0 after 59 usecs
[ 1.567877] calling pdc2027x_init+0x0/0x1b @ 1
[ 1.568049] initcall pdc2027x_init+0x0/0x1b returned 0 after 56 usecs
[ 1.568166] calling sil680_init+0x0/0x1b @ 1
[ 1.568336] initcall sil680_init+0x0/0x1b returned 0 after 54 usecs
[ 1.568453] calling via_init+0x0/0x1b @ 1
[ 1.568574] pata_via 0000:00:0f.1: version 0.3.4
[ 1.568697] xen: registering gsi 20 triggering 0 polarity 1
[ 1.568812] xen_map_pirq_gsi: returning irq 20 for gsi 20
[ 1.568926] xen: --> pirq=20 -> irq=20
[ 1.569038] Already setup the GSI :20
[ 1.569151] pata_via 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[ 1.570175] scsi2 : pata_via
[ 1.570443] scsi3 : pata_via
[ 1.573335] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe800 irq 14
[ 1.573454] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe808 irq 15
[ 1.573602] calling 3_async_port_probe+0x0/0x4a @ 579
[ 1.573886] calling 4_async_port_probe+0x0/0x4a @ 580
[ 1.574001] async_waiting @ 580
[ 1.574178] initcall via_init+0x0/0x1b returned 0 after 5479 usecs
[ 1.574295] calling e1000_init_module+0x0/0x87 @ 1
[ 1.574410] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.574526] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.574707] initcall e1000_init_module+0x0/0x87 returned 0 after 288 usecs
[ 1.574826] calling e1000_init_module+0x0/0x3e @ 1
[ 1.574939] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
[ 1.575053] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 1.575232] initcall e1000_init_module+0x0/0x3e returned 0 after 284 usecs
[ 1.575351] calling e100_init_module+0x0/0x5d @ 1
[ 1.575466] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.575580] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.575758] initcall e100_init_module+0x0/0x5d returned 0 after 283 usecs
[ 1.575876] calling net_olddevs_init+0x0/0x9e @ 1
[ 1.575995] initcall net_olddevs_init+0x0/0x9e returned 0 after 4 usecs
[ 1.576111] calling ppp_init+0x0/0xe4 @ 1
[ 1.576223] PPP generic driver version 2.4.2
[ 1.576481] initcall ppp_init+0x0/0xe4 returned 0 after 250 usecs
[ 1.576599] calling ppp_async_init+0x0/0x36 @ 1
[ 1.576714] initcall ppp_async_init+0x0/0x36 returned 0 after 0 usecs
[ 1.576833] calling ppp_sync_init+0x0/0x36 @ 1
[ 1.576948] initcall ppp_sync_init+0x0/0x36 returned 0 after 0 usecs
[ 1.577064] calling deflate_init+0x0/0x3b @ 1
[ 1.577176] PPP Deflate Compression module registered
[ 1.577293] initcall deflate_init+0x0/0x3b returned 0 after 112 usecs
[ 1.577409] calling bsdcomp_init+0x0/0x2f @ 1
[ 1.577521] PPP BSD Compression module registered
[ 1.577635] initcall bsdcomp_init+0x0/0x2f returned 0 after 110 usecs
[ 1.577751] calling pppox_init+0x0/0x12 @ 1
[ 1.577864] NET: Registered protocol family 24
[ 1.577978] initcall pppox_init+0x0/0x12 returned 0 after 110 usecs
[ 1.578095] calling pppoe_init+0x0/0x87 @ 1
[ 1.578220] initcall pppoe_init+0x0/0x87 returned 0 after 10 usecs
[ 1.578336] calling netif_init+0x0/0x66 @ 1
[ 1.578450] initcall netif_init+0x0/0x66 returned 0 after 0 usecs
[ 1.578567] calling netback_init+0x0/0x219 @ 1
[ 1.578831] initcall netback_init+0x0/0x219 returned 0 after 145 usecs
[ 1.578951] calling dummy_init_module+0x0/0xaa @ 1
[ 1.579317] initcall dummy_init_module+0x0/0xaa returned 0 after 244 usecs
[ 1.579436] calling ifb_init_module+0x0/0xad @ 1
[ 1.579990] initcall ifb_init_module+0x0/0xad returned 0 after 428 usecs
[ 1.580062] calling cp_init+0x0/0x1b @ 1
[ 1.580246] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.580364] 8139cp 0000:00:09.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.580631] initcall cp_init+0x0/0x1b returned 0 after 396 usecs
[ 1.580747] calling rtl8139_init_module+0x0/0x1b @ 1
[ 1.580870] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 1.580998] xen: registering gsi 17 triggering 0 polarity 1
[ 1.581118] xen: --> pirq=17 -> irq=17
[ 1.581236] 8139too 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.581839] 8139too 0000:00:09.0: eth0: RealTek RTL8139 at 0xffffc9000001a000, 00:e0:4c:4c:17:fb, IRQ 17
[ 1.582105] initcall rtl8139_init_module+0x0/0x1b returned 0 after 1211 usecs
[ 1.582223] calling tun_init+0x0/0x93 @ 1
[ 1.582334] tun: Universal TUN/TAP device driver, 1.6
[ 1.582447] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.582642] initcall tun_init+0x0/0x93 returned 0 after 298 usecs
[ 1.582760] calling rtl8169_init_module+0x0/0x1b @ 1
[ 1.582935] initcall rtl8169_init_module+0x0/0x1b returned 0 after 58 usecs
[ 1.583054] calling cdc_init+0x0/0x1b @ 1
[ 1.583222] usbcore: registered new interface driver cdc_ether
[ 1.583339] initcall cdc_init+0x0/0x1b returned 0 after 167 usecs
[ 1.583454] calling cdc_subset_init+0x0/0x1b @ 1
[ 1.583619] usbcore: registered new interface driver cdc_subset
[ 1.583736] initcall cdc_subset_init+0x0/0x1b returned 0 after 163 usecs
[ 1.583853] calling zaurus_init+0x0/0x1b @ 1
[ 1.584016] usbcore: registered new interface driver zaurus
[ 1.584134] initcall zaurus_init+0x0/0x1b returned 0 after 162 usecs
[ 1.584250] calling usbnet_init+0x0/0x2b @ 1
[ 1.584368] initcall usbnet_init+0x0/0x2b returned 0 after 3 usecs
[ 1.584484] calling cdc_ncm_init+0x0/0x29 @ 1
[ 1.584596] cdc_ncm: 01-June-2011
[ 1.584761] usbcore: registered new interface driver cdc_ncm
[ 1.584878] initcall cdc_ncm_init+0x0/0x29 returned 0 after 273 usecs
[ 1.584995] calling de_init+0x0/0x1b @ 1
[ 1.585166] initcall de_init+0x0/0x1b returned 0 after 55 usecs
[ 1.585284] calling tulip_init+0x0/0x33 @ 1
[ 1.585459] initcall tulip_init+0x0/0x33 returned 0 after 59 usecs
[ 1.585577] calling de4x5_module_init+0x0/0x1b @ 1
[ 1.585748] initcall de4x5_module_init+0x0/0x1b returned 0 after 53 usecs
[ 1.585865] calling init_netconsole+0x0/0x23e @ 1
[ 1.585981] netconsole: local port 25360
[ 1.586093] netconsole: local IP 85.10.200.103
[ 1.586205] netconsole: interface 'eth0'
[ 1.586318] netconsole: remote port 514
[ 1.586430] netconsole: remote IP 217.160.215.119
[ 1.586543] netconsole: remote ethernet address 00:26:88:75:cf:27
[ 1.586658] netconsole: device eth0 not up yet, forcing it
[ 1.586942] 8139too 0000:00:09.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 1.587260] netconsole: carrier detect appears untrustworthy, waiting 4 seconds
[ 1.742464] async_waiting @ 579
[ 1.770068] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.970465] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7
[ 1.970585] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.990444] ata1.00: configured for UDMA/133
[ 1.990567] async_waiting @ 5
[ 1.990678] async_continuing @ 5 after 0 usec
[ 1.993138] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5
[ 1.993608] calling 5_sd_probe_async+0x0/0x1b9 @ 599
[ 1.993794] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.994088] sd 0:0:0:0: [sda] Write Protect is off
[ 1.994202] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.994356] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.995147] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.995271] initcall 1_async_port_probe+0x0/0x4a returned 0 after 418111 usecs
[ 1.995482] async_continuing @ 12 after 418050 usec
[ 2.011474] sda: sda1 sda2 sda3 sda4 < sda5 >
[ 2.013823] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.013946] initcall 5_sd_probe_async+0x0/0x1b9 returned 0 after 19744 usecs
[ 2.200077] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.380461] ata2.00: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7
[ 2.380577] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.400468] ata2.00: configured for UDMA/133
[ 2.400596] async_waiting @ 12
[ 2.400709] async_continuing @ 12 after 0 usec
[ 2.400929] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5
[ 2.401365] calling 6_sd_probe_async+0x0/0x1b9 @ 599
[ 2.401536] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.401825] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.401941] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.402095] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.402811] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.402935] initcall 2_async_port_probe+0x0/0x4a returned 0 after 816059 usecs
[ 2.403137] async_continuing @ 579 after 645080 usec
[ 2.403253] initcall 3_async_port_probe+0x0/0x4a returned 0 after 810093 usecs
[ 2.403453] async_continuing @ 580 after 809903 usec
[ 2.411851] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
[ 2.412641] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.412759] initcall 6_sd_probe_async+0x0/0x1b9 returned 0 after 11011 usecs
[ 2.572527] async_waiting @ 580
[ 2.572641] async_continuing @ 580 after 0 usec
[ 2.572757] initcall 4_async_port_probe+0x0/0x4a returned 0 after 975345 usecs
[ 5.600087] console [netcon0] enabled
[ 5.600087] netconsole: network logging started
[ 5.600087] initcall init_netconsole+0x0/0x23e returned 0 after 3950957 usecs
[ 5.600087] calling cdrom_init+0x0/0xd @ 1
[ 5.600087] initcall cdrom_init+0x0/0xd returned 0 after 5 usecs
[ 5.600087] calling mon_init+0x0/0xfc @ 1
[ 5.632465] initcall mon_init+0x0/0xfc returned 0 after 159 usecs
[ 5.632585] calling ehci_hcd_init+0x0/0x78 @ 1
[ 5.632704] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.633099] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[ 5.633220] xen: registering gsi 21 triggering 0 polarity 1
[ 5.633350] xen: --> pirq=21 -> irq=21
[ 5.633490] ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 5.633726] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 5.633930] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 5.634263] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfc121000
[ 5.650086] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 5.650427] hub 1-0:1.0: USB hub found
[ 5.650548] hub 1-0:1.0: 8 ports detected
[ 5.650883] initcall ehci_hcd_init+0x0/0x78 returned 0 after 17750 usecs
[ 5.651005] calling ohci_hcd_mod_init+0x0/0x54 @ 1
[ 5.651122] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.651300] initcall ohci_hcd_mod_init+0x0/0x54 returned 0 after 171 usecs
[ 5.651421] calling uhci_hcd_init+0x0/0xc6 @ 1
[ 5.651539] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.651695] xen: registering gsi 21 triggering 0 polarity 1
[ 5.651813] xen_map_pirq_gsi: returning irq 21 for gsi 21
[ 5.651930] xen: --> pirq=21 -> irq=21
[ 5.652050] Already setup the GSI :21
[ 5.652167] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 5.652374] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 5.652584] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 5.652822] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e900
[ 5.653219] hub 2-0:1.0: USB hub found
[ 5.653340] hub 2-0:1.0: 2 ports detected
[ 5.653619] xen: registering gsi 21 triggering 0 polarity 1
[ 5.653736] xen_map_pirq_gsi: returning irq 21 for gsi 21
[ 5.653854] xen: --> pirq=21 -> irq=21
[ 5.653975] Already setup the GSI :21
[ 5.654092] uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 5.654298] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 5.654496] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 5.654736] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000ea00
[ 5.655122] hub 3-0:1.0: USB hub found
[ 5.655243] hub 3-0:1.0: 2 ports detected
[ 5.655518] xen: registering gsi 21 triggering 0 polarity 1
[ 5.655636] xen_map_pirq_gsi: returning irq 21 for gsi 21
[ 5.655753] xen: --> pirq=21 -> irq=21
[ 5.655872] Already setup the GSI :21
[ 5.655991] uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 5.656199] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 5.656402] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 5.656640] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000eb00
[ 5.657022] hub 4-0:1.0: USB hub found
[ 5.657143] hub 4-0:1.0: 2 ports detected
[ 5.657419] xen: registering gsi 21 triggering 0 polarity 1
[ 5.657538] xen_map_pirq_gsi: returning irq 21 for gsi 21
[ 5.657656] xen: --> pirq=21 -> irq=21
[ 5.657778] Already setup the GSI :21
[ 5.657894] uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 5.658100] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 5.658309] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 5.658549] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000ec00
[ 5.658934] hub 5-0:1.0: USB hub found
[ 5.659055] hub 5-0:1.0: 2 ports detected
[ 5.659379] initcall uhci_hcd_init+0x0/0xc6 returned 0 after 7654 usecs
[ 5.659501] calling acm_init+0x0/0xfd @ 1
[ 5.659692] usbcore: registered new interface driver cdc_acm
[ 5.659813] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 5.660016] initcall acm_init+0x0/0xfd returned 0 after 388 usecs
[ 5.660057] calling usblp_init+0x0/0x1b @ 1
[ 5.660337] usbcore: registered new interface driver usblp
[ 5.660460] initcall usblp_init+0x0/0x1b returned 0 after 199 usecs
[ 5.660581] calling usb_serial_init+0x0/0x1e5 @ 1
[ 5.660822] usbcore: registered new interface driver usbserial
[ 5.660997] USB Serial support registered for generic
[ 5.661175] usbcore: registered new interface driver usbserial_generic
[ 5.661296] usbserial: USB Serial Driver core
[ 5.661416] initcall usb_serial_init+0x0/0x1e5 returned 0 after 699 usecs
[ 5.661536] calling pl2303_init+0x0/0x58 @ 1
[ 5.661705] USB Serial support registered for pl2303
[ 5.661888] usbcore: registered new interface driver pl2303
[ 5.662007] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 5.662129] initcall pl2303_init+0x0/0x58 returned 0 after 464 usecs
[ 5.662249] calling i8042_init+0x0/0x3a2 @ 1
[ 5.662498] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 5.662620] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 5.663067] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.663286] initcall i8042_init+0x0/0x3a2 returned 0 after 897 usecs
[ 5.663409] calling serport_init+0x0/0x34 @ 1
[ 5.663529] initcall serport_init+0x0/0x34 returned 0 after 0 usecs
[ 5.663649] calling mousedev_init+0x0/0x8e @ 1
[ 5.663948] mousedev: PS/2 mouse device common for all mice
[ 5.664070] initcall mousedev_init+0x0/0x8e returned 0 after 295 usecs
[ 5.664189] calling joydev_init+0x0/0x12 @ 1
[ 5.664307] initcall joydev_init+0x0/0x12 returned 0 after 1 usecs
[ 5.664426] calling evdev_init+0x0/0x12 @ 1
[ 5.664753] initcall evdev_init+0x0/0x12 returned 0 after 145 usecs
[ 5.664873] calling atkbd_init+0x0/0x27 @ 1
[ 5.665054] initcall atkbd_init+0x0/0x27 returned 0 after 59 usecs
[ 5.665173] calling cmos_init+0x0/0x6a @ 1
[ 5.665329] rtc_cmos 00:05: RTC can wake from S4
[ 5.665729] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 5.665917] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 5.666092] initcall cmos_init+0x0/0x6a returned 0 after 782 usecs
[ 5.666212] calling i2c_dev_init+0x0/0xca @ 1
[ 5.666329] i2c /dev entries driver
[ 5.666502] initcall i2c_dev_init+0x0/0xca returned 0 after 166 usecs
[ 5.666622] calling i2c_piix4_init+0x0/0x1b @ 1
[ 5.666805] initcall i2c_piix4_init+0x0/0x1b returned 0 after 62 usecs
[ 5.666926] calling sm_it87_init+0x0/0x3f5 @ 1
[ 5.667077] initcall sm_it87_init+0x0/0x3f5 returned -19 after 32 usecs
[ 5.667196] calling k8temp_init+0x0/0x1b @ 1
[ 5.667464] initcall k8temp_init+0x0/0x1b returned 0 after 146 usecs
[ 5.667585] calling sm_vt8231_init+0x0/0x1b @ 1
[ 5.667759] initcall sm_vt8231_init+0x0/0x1b returned 0 after 54 usecs
[ 5.667879] calling raid_init+0x0/0x12 @ 1
[ 5.667997] md: raid1 personality registered for level 1
[ 5.668116] initcall raid_init+0x0/0x12 returned 0 after 115 usecs
[ 5.668234] calling raid5_init+0x0/0x2c @ 1
[ 5.668406] md: raid6 personality registered for level 6
[ 5.668526] md: raid5 personality registered for level 5
[ 5.668645] md: raid4 personality registered for level 4
[ 5.670279] initcall raid5_init+0x0/0x2c returned 0 after 2484 usecs
[ 5.670279] calling dm_init+0x0/0x46 @ 1
[ 5.671724] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 5.671926] initcall dm_init+0x0/0x46 returned 0 after 665 usecs
[ 5.672047] calling dm_crypt_init+0x0/0x69 @ 1
[ 5.672171] initcall dm_crypt_init+0x0/0x69 returned 0 after 6 usecs
[ 5.672290] calling dm_snapshot_init+0x0/0x205 @ 1
[ 5.672505] initcall dm_snapshot_init+0x0/0x205 returned 0 after 39 usecs
[ 5.672627] calling dm_mirror_init+0x0/0x79 @ 1
[ 5.672750] initcall dm_mirror_init+0x0/0x79 returned 0 after 5 usecs
[ 5.672869] calling dm_dirty_log_init+0x0/0x59 @ 1
[ 5.672986] initcall dm_dirty_log_init+0x0/0x59 returned 0 after 0 usecs
[ 5.673160] calling cpufreq_stats_init+0x0/0x9d @ 1
[ 5.673281] initcall cpufreq_stats_init+0x0/0x9d returned 0 after 2 usecs
[ 5.673400] calling cpufreq_gov_dbs_init+0x0/0x5e @ 1
[ 5.673520] initcall cpufreq_gov_dbs_init+0x0/0x5e returned 0 after 1 usecs
[ 5.673694] calling init_ladder+0x0/0x12 @ 1
[ 5.673811] cpuidle: using governor ladder
[ 5.673927] initcall init_ladder+0x0/0x12 returned 0 after 112 usecs
[ 5.674045] calling init_menu+0x0/0x12 @ 1
[ 5.674215] cpuidle: using governor menu
[ 5.674332] initcall init_menu+0x0/0x12 returned 0 after 112 usecs
[ 5.674449] calling hid_init+0x0/0x4d @ 1
[ 5.674637] initcall hid_init+0x0/0x4d returned 0 after 69 usecs
[ 5.674759] calling a4_init+0x0/0x1b @ 1
[ 5.674930] initcall a4_init+0x0/0x1b returned 0 after 51 usecs
[ 5.675050] calling apple_init+0x0/0x38 @ 1
[ 5.675223] initcall apple_init+0x0/0x38 returned 0 after 52 usecs
[ 5.675343] calling belkin_init+0x0/0x1b @ 1
[ 5.675518] initcall belkin_init+0x0/0x1b returned 0 after 55 usecs
[ 5.675638] calling ch_init+0x0/0x1b @ 1
[ 5.675806] initcall ch_init+0x0/0x1b returned 0 after 48 usecs
[ 5.675927] calling ch_init+0x0/0x1b @ 1
[ 5.676095] initcall ch_init+0x0/0x1b returned 0 after 49 usecs
[ 5.676215] calling cp_init+0x0/0x1b @ 1
[ 5.676386] initcall cp_init+0x0/0x1b returned 0 after 50 usecs
[ 5.676508] calling dr_init+0x0/0x1b @ 1
[ 5.676678] initcall dr_init+0x0/0x1b returned 0 after 50 usecs
[ 5.676799] calling ez_init+0x0/0x1b @ 1
[ 5.676967] initcall ez_init+0x0/0x1b returned 0 after 50 usecs
[ 5.677087] calling gyration_init+0x0/0x1b @ 1
[ 5.677259] initcall gyration_init+0x0/0x1b returned 0 after 50 usecs
[ 5.677380] calling ks_init+0x0/0x1b @ 1
[ 5.677563] initcall ks_init+0x0/0x1b returned 0 after 63 usecs
[ 5.677684] calling kye_init+0x0/0x1b @ 1
[ 5.677863] initcall kye_init+0x0/0x1b returned 0 after 58 usecs
[ 5.677983] calling lg_init+0x0/0x1b @ 1
[ 5.678153] initcall lg_init+0x0/0x1b returned 0 after 49 usecs
[ 5.678273] calling ms_init+0x0/0x1b @ 1
[ 5.678450] initcall ms_init+0x0/0x1b returned 0 after 58 usecs
[ 5.678570] calling mr_init+0x0/0x1b @ 1
[ 5.678740] initcall mr_init+0x0/0x1b returned 0 after 50 usecs
[ 5.678860] calling ntrig_init+0x0/0x1b @ 1
[ 5.679033] initcall ntrig_init+0x0/0x1b returned 0 after 53 usecs
[ 5.679153] calling ortek_init+0x0/0x1b @ 1
[ 5.679323] initcall ortek_init+0x0/0x1b returned 0 after 51 usecs
[ 5.679443] calling pl_init+0x0/0x1b @ 1
[ 5.679613] initcall pl_init+0x0/0x1b returned 0 after 51 usecs
[ 5.679732] calling pl_init+0x0/0x1b @ 1
[ 5.679901] initcall pl_init+0x0/0x1b returned 0 after 51 usecs
[ 5.680021] calling samsung_init+0x0/0x1b @ 1
[ 5.680231] initcall samsung_init+0x0/0x1b returned 0 after 85 usecs
[ 5.680352] calling sjoy_init+0x0/0x1b @ 1
[ 5.680522] initcall sjoy_init+0x0/0x1b returned 0 after 51 usecs
[ 5.680643] calling sony_init+0x0/0x1b @ 1
[ 5.680815] initcall sony_init+0x0/0x1b returned 0 after 52 usecs
[ 5.680935] calling sp_init+0x0/0x1b @ 1
[ 5.681115] initcall sp_init+0x0/0x1b returned 0 after 59 usecs
[ 5.681237] calling ga_init+0x0/0x1b @ 1
[ 5.681408] initcall ga_init+0x0/0x1b returned 0 after 51 usecs
[ 5.681527] calling tm_init+0x0/0x1b @ 1
[ 5.681699] initcall tm_init+0x0/0x1b returned 0 after 52 usecs
[ 5.681818] calling ts_init+0x0/0x1b @ 1
[ 5.681990] initcall ts_init+0x0/0x1b returned 0 after 52 usecs
[ 5.682110] calling twinhan_init+0x0/0x1b @ 1
[ 5.682283] initcall twinhan_init+0x0/0x1b returned 0 after 52 usecs
[ 5.682404] calling zp_init+0x0/0x1b @ 1
[ 5.682594] initcall zp_init+0x0/0x1b returned 0 after 70 usecs
[ 5.682713] calling hid_init+0x0/0x79 @ 1
[ 5.682947] usbcore: registered new interface driver usbhid
[ 5.683066] usbhid: USB HID core driver
[ 5.683185] initcall hid_init+0x0/0x79 returned 0 after 343 usecs
[ 5.683304] calling staging_init+0x0/0x8 @ 1
[ 5.683420] initcall staging_init+0x0/0x8 returned 0 after 0 usecs
[ 5.683597] calling alsa_hwdep_init+0x0/0x64 @ 1
[ 5.683734] initcall alsa_hwdep_init+0x0/0x64 returned 0 after 16 usecs
[ 5.683855] calling alsa_timer_init+0x0/0x146 @ 1
[ 5.684076] initcall alsa_timer_init+0x0/0x146 returned 0 after 98 usecs
[ 5.684196] calling alsa_pcm_init+0x0/0x6c @ 1
[ 5.684317] initcall alsa_pcm_init+0x0/0x6c returned 0 after 1 usecs
[ 5.684436] calling snd_mem_init+0x0/0x2c @ 1
[ 5.684556] initcall snd_mem_init+0x0/0x2c returned 0 after 4 usecs
[ 5.684731] calling patch_realtek_init+0x0/0x12 @ 1
[ 5.684852] initcall patch_realtek_init+0x0/0x12 returned 0 after 0 usecs
[ 5.684973] calling patch_cmedia_init+0x0/0x12 @ 1
[ 5.685093] initcall patch_cmedia_init+0x0/0x12 returned 0 after 0 usecs
[ 5.685268] calling patch_analog_init+0x0/0x12 @ 1
[ 5.685389] initcall patch_analog_init+0x0/0x12 returned 0 after 0 usecs
[ 5.685510] calling patch_sigmatel_init+0x0/0x12 @ 1
[ 5.685629] initcall patch_sigmatel_init+0x0/0x12 returned 0 after 0 usecs
[ 5.685807] calling patch_si3054_init+0x0/0x12 @ 1
[ 5.685927] initcall patch_si3054_init+0x0/0x12 returned 0 after 0 usecs
[ 5.686047] calling patch_cirrus_init+0x0/0x12 @ 1
[ 5.686167] initcall patch_cirrus_init+0x0/0x12 returned 0 after 0 usecs
[ 5.686342] calling patch_ca0110_init+0x0/0x12 @ 1
[ 5.686463] initcall patch_ca0110_init+0x0/0x12 returned 0 after 0 usecs
[ 5.686585] calling patch_conexant_init+0x0/0x12 @ 1
[ 5.686703] initcall patch_conexant_init+0x0/0x12 returned 0 after 0 usecs
[ 5.686882] calling patch_via_init+0x0/0x12 @ 1
[ 5.687000] initcall patch_via_init+0x0/0x12 returned 0 after 0 usecs
[ 5.687120] calling patch_hdmi_init+0x0/0x12 @ 1
[ 5.687240] initcall patch_hdmi_init+0x0/0x12 returned 0 after 0 usecs
[ 5.687417] calling alsa_card_azx_init+0x0/0x1b @ 1
[ 5.687611] initcall alsa_card_azx_init+0x0/0x1b returned 0 after 72 usecs
[ 5.687732] calling alsa_sound_last_init+0x0/0x6f @ 1
[ 5.687850] ALSA device list:
[ 5.687963] No soundcards found.
[ 5.688079] initcall alsa_sound_last_init+0x0/0x6f returned 0 after 222 usecs
[ 5.688256] calling llc_init+0x0/0x20 @ 1
[ 5.688376] initcall llc_init+0x0/0x20 returned 0 after 0 usecs
[ 5.688495] calling snap_init+0x0/0x39 @ 1
[ 5.688626] initcall snap_init+0x0/0x39 returned 0 after 10 usecs
[ 5.688747] calling blackhole_module_init+0x0/0x12 @ 1
[ 5.688869] initcall blackhole_module_init+0x0/0x12 returned 0 after 1 usecs
[ 5.688990] calling police_init_module+0x0/0x12 @ 1
[ 5.689166] initcall police_init_module+0x0/0x12 returned 0 after 0 usecs
[ 5.689289] calling cbq_module_init+0x0/0x12 @ 1
[ 5.689409] initcall cbq_module_init+0x0/0x12 returned 0 after 0 usecs
[ 5.689530] calling htb_module_init+0x0/0x12 @ 1
[ 5.689705] initcall htb_module_init+0x0/0x12 returned 0 after 0 usecs
[ 5.689828] calling red_module_init+0x0/0x12 @ 1
[ 5.689946] initcall red_module_init+0x0/0x12 returned 0 after 0 usecs
[ 5.690070] calling gred_module_init+0x0/0x12 @ 1
[ 5.690158] initcall gred_module_init+0x0/0x12 returned 0 after 0 usecs
[ 5.690158] calling ingress_module_init+0x0/0x12 @ 1
[ 5.690158] initcall ingress_module_init+0x0/0x12 returned 0 after 0 usecs
[ 5.690158] calling dsmark_module_init+0x0/0x12 @ 1
[ 5.690158] initcall dsmark_module_init+0x0/0x12 returned 0 after 0 usecs
[ 5.690158] calling sfb_module_init+0x0/0x12 @ 1
[ 5.690158] initcall sfb_module_init+0x0/0x12 returned 0 after 0 usecs
[ 5.690158] calling sfq_module_init+0x0/0x12 @ 1
[ 5.690158] initcall sfq_module_init+0x0/0x12 returned 0 after 0 usecs
[ 5.690158] calling tbf_module_init+0x0/0x12 @ 1
[ 5.690158] initcall tbf_module_init+0x0/0x12 returned 0 after 0 usecs
[ 5.690158] calling teql_init+0x0/0xf1 @ 1
[ 5.692330] initcall teql_init+0x0/0xf1 returned 0 after 462 usecs
[ 5.692453] calling prio_module_init+0x0/0x12 @ 1
[ 5.692575] initcall prio_module_init+0x0/0x12 returned 0 after 0 usecs
[ 5.692697] calling mqprio_module_init+0x0/0x12 @ 1
[ 5.692815] initcall mqprio_module_init+0x0/0x12 returned 0 after 0 usecs
[ 5.692993] calling choke_module_init+0x0/0x12 @ 1
[ 5.693113] initcall choke_module_init+0x0/0x12 returned 0 after 0 usecs
[ 5.693235] calling init_u32+0x0/0x2e @ 1
[ 5.693351] u32 classifier
[ 5.693519] Actions configured
[ 5.693636] initcall init_u32+0x0/0x2e returned 0 after 276 usecs
[ 5.693755] calling init_route4+0x0/0x12 @ 1
[ 5.693872] initcall init_route4+0x0/0x12 returned 0 after 0 usecs
[ 5.694046] calling init_fw+0x0/0x12 @ 1
[ 5.694164] initcall init_fw+0x0/0x12 returned 0 after 0 usecs
[ 5.694283] calling init_rsvp+0x0/0x12 @ 1
[ 5.694400] initcall init_rsvp+0x0/0x12 returned 0 after 0 usecs
[ 5.694574] calling init_tcindex+0x0/0x12 @ 1
[ 5.694692] initcall init_tcindex+0x0/0x12 returned 0 after 0 usecs
[ 5.694812] calling init_rsvp+0x0/0x12 @ 1
[ 5.694928] initcall init_rsvp+0x0/0x12 returned 0 after 0 usecs
[ 5.695104] calling init_basic+0x0/0x12 @ 1
[ 5.695222] initcall init_basic+0x0/0x12 returned 0 after 0 usecs
[ 5.695342] calling init_cgroup_cls+0x0/0x3c @ 1
[ 5.695461] initcall init_cgroup_cls+0x0/0x3c returned 0 after 0 usecs
[ 5.695638] calling nfnetlink_init+0x0/0x27 @ 1
[ 5.695756] Netfilter messages via NETLINK v0.30.
[ 5.695887] initcall nfnetlink_init+0x0/0x27 returned 0 after 125 usecs
[ 5.696007] calling nfnetlink_queue_init+0x0/0xa4 @ 1
[ 5.696130] initcall nfnetlink_queue_init+0x0/0xa4 returned 0 after 4 usecs
[ 5.696251] calling nfnetlink_log_init+0x0/0xd7 @ 1
[ 5.696432] initcall nfnetlink_log_init+0x0/0xd7 returned 0 after 6 usecs
[ 5.696556] calling nf_conntrack_standalone_init+0x0/0x12 @ 1
[ 5.696675] nf_conntrack version 0.5.0 (1137 buckets, 4548 max)
[ 5.699040] initcall nf_conntrack_standalone_init+0x0/0x12 returned 0 after 2309 usecs
[ 5.699302] calling ctnetlink_init+0x0/0x76 @ 1
[ 5.699420] ctnetlink v0.93: registering with nfnetlink.
[ 5.699540] initcall ctnetlink_init+0x0/0x76 returned 0 after 115 usecs
[ 5.699662] calling nf_conntrack_ftp_init+0x0/0x1a4 @ 1
[ 5.699856] initcall nf_conntrack_ftp_init+0x0/0x1a4 returned 0 after 17 usecs
[ 5.700056] calling nf_conntrack_h323_init+0x0/0xd4 @ 1
[ 5.700192] initcall nf_conntrack_h323_init+0x0/0xd4 returned 0 after 17 usecs
[ 5.700392] calling nf_conntrack_irc_init+0x0/0x181 @ 1
[ 5.700517] initcall nf_conntrack_irc_init+0x0/0x181 returned 0 after 5 usecs
[ 5.700640] calling nf_conntrack_sip_init+0x0/0x1ca @ 1
[ 5.700762] initcall nf_conntrack_sip_init+0x0/0x1ca returned 0 after 1 usecs
[ 5.700881] calling xt_init+0x0/0x117 @ 1
[ 5.701054] initcall xt_init+0x0/0x117 returned 0 after 1 usecs
[ 5.701173] calling tcpudp_mt_init+0x0/0x17 @ 1
[ 5.701291] initcall tcpudp_mt_init+0x0/0x17 returned 0 after 0 usecs
[ 5.701410] calling mark_mt_init+0x0/0x40 @ 1
[ 5.701584] initcall mark_mt_init+0x0/0x40 returned 0 after 0 usecs
[ 5.701703] calling connmark_mt_init+0x0/0x40 @ 1
[ 5.701821] initcall connmark_mt_init+0x0/0x40 returned 0 after 0 usecs
[ 5.701941] calling classify_tg_init+0x0/0x17 @ 1
[ 5.702113] initcall classify_tg_init+0x0/0x17 returned 0 after 0 usecs
[ 5.702234] calling dscp_tg_init+0x0/0x17 @ 1
[ 5.702351] initcall dscp_tg_init+0x0/0x17 returned 0 after 0 usecs
[ 5.702470] calling hl_tg_init+0x0/0x17 @ 1
[ 5.702641] initcall hl_tg_init+0x0/0x17 returned 0 after 0 usecs
[ 5.702761] calling nflog_tg_init+0x0/0x12 @ 1
[ 5.702878] initcall nflog_tg_init+0x0/0x12 returned 0 after 0 usecs
[ 5.702997] calling nfqueue_tg_init+0x0/0x17 @ 1
[ 5.703169] initcall nfqueue_tg_init+0x0/0x17 returned 0 after 0 usecs
[ 5.703290] calling tcpmss_tg_init+0x0/0x17 @ 1
[ 5.703407] initcall tcpmss_tg_init+0x0/0x17 returned 0 after 0 usecs
[ 5.703526] calling comment_mt_init+0x0/0x12 @ 1
[ 5.703698] initcall comment_mt_init+0x0/0x12 returned 0 after 0 usecs
[ 5.703819] calling connbytes_mt_init+0x0/0x12 @ 1
[ 5.703938] initcall connbytes_mt_init+0x0/0x12 returned 0 after 0 usecs
[ 5.704059] calling connlimit_mt_init+0x0/0x17 @ 1
[ 5.704231] initcall connlimit_mt_init+0x0/0x17 returned 0 after 0 usecs
[ 5.704353] calling conntrack_mt_init+0x0/0x17 @ 1
[ 5.704473] initcall conntrack_mt_init+0x0/0x17 returned 0 after 0 usecs
[ 5.704593] calling dscp_mt_init+0x0/0x17 @ 1
[ 5.704765] initcall dscp_mt_init+0x0/0x17 returned 0 after 0 usecs
[ 5.704886] calling hashlimit_mt_init+0x0/0x8c @ 1
[ 5.705016] initcall hashlimit_mt_init+0x0/0x8c returned 0 after 10 usecs
[ 5.705136] calling helper_mt_init+0x0/0x12 @ 1
[ 5.705310] initcall helper_mt_init+0x0/0x12 returned 0 after 0 usecs
[ 5.705430] calling hl_mt_init+0x0/0x17 @ 1
[ 5.705548] initcall hl_mt_init+0x0/0x17 returned 0 after 0 usecs
[ 5.705668] calling length_mt_init+0x0/0x17 @ 1
[ 5.705839] initcall length_mt_init+0x0/0x17 returned 0 after 0 usecs
[ 5.705960] calling limit_mt_init+0x0/0x12 @ 1
[ 5.706076] initcall limit_mt_init+0x0/0x12 returned 0 after 0 usecs
[ 5.706196] calling mac_mt_init+0x0/0x12 @ 1
[ 5.706367] initcall mac_mt_init+0x0/0x12 returned 0 after 0 usecs
[ 5.706487] calling multiport_mt_init+0x0/0x17 @ 1
[ 5.706604] initcall multiport_mt_init+0x0/0x17 returned 0 after 0 usecs
[ 5.706723] calling xt_osf_init+0x0/0x8d @ 1
[ 5.706894] initcall xt_osf_init+0x0/0x8d returned 0 after 0 usecs
[ 5.707015] calling owner_mt_init+0x0/0x12 @ 1
[ 5.707131] initcall owner_mt_init+0x0/0x12 returned 0 after 0 usecs
[ 5.707250] calling pkttype_mt_init+0x0/0x12 @ 1
[ 5.707422] initcall pkttype_mt_init+0x0/0x12 returned 0 after 0 usecs
[ 5.707543] calling quota_mt_init+0x0/0x12 @ 1
[ 5.707659] initcall quota_mt_init+0x0/0x12 returned 0 after 0 usecs
[ 5.707777] calling realm_mt_init+0x0/0x12 @ 1
[ 5.707948] initcall realm_mt_init+0x0/0x12 returned 0 after 0 usecs
[ 5.708067] calling recent_mt_init+0x0/0x7a @ 1
[ 5.708185] initcall recent_mt_init+0x0/0x7a returned 0 after 2 usecs
[ 5.708304] calling state_mt_init+0x0/0x12 @ 1
[ 5.708475] initcall state_mt_init+0x0/0x12 returned 0 after 0 usecs
[ 5.708594] calling statistic_mt_init+0x0/0x12 @ 1
[ 5.708711] initcall statistic_mt_init+0x0/0x12 returned 0 after 0 usecs
[ 5.708829] calling string_mt_init+0x0/0x12 @ 1
[ 5.709000] initcall string_mt_init+0x0/0x12 returned 0 after 0 usecs
[ 5.709119] calling tcpmss_mt_init+0x0/0x17 @ 1
[ 5.709235] initcall tcpmss_mt_init+0x0/0x17 returned 0 after 0 usecs
[ 5.709355] calling u32_mt_init+0x0/0x12 @ 1
[ 5.709526] initcall u32_mt_init+0x0/0x12 returned 0 after 0 usecs
[ 5.709646] calling sysctl_ipv4_init+0x0/0x87 @ 1
[ 5.709772] initcall sysctl_ipv4_init+0x0/0x87 returned 0 after 7 usecs
[ 5.709893] calling ipip_init+0x0/0x60 @ 1
[ 5.710063] IPv4 over IPv4 tunneling driver
[ 5.710440] initcall ipip_init+0x0/0x60 returned 0 after 366 usecs
[ 5.710563] calling init_syncookies+0x0/0x19 @ 1
[ 5.710715] initcall init_syncookies+0x0/0x19 returned 0 after 33 usecs
[ 5.710836] calling tunnel4_init+0x0/0x66 @ 1
[ 5.710955] initcall tunnel4_init+0x0/0x66 returned 0 after 0 usecs
[ 5.711076] calling ipv4_netfilter_init+0x0/0x12 @ 1
[ 5.711195] initcall ipv4_netfilter_init+0x0/0x12 returned 0 after 0 usecs
[ 5.711372] calling nf_conntrack_l3proto_ipv4_init+0x0/0x14b @ 1
[ 5.711527] initcall nf_conntrack_l3proto_ipv4_init+0x0/0x14b returned 0 after 33 usecs
[ 5.711728] calling nf_nat_init+0x0/0x111 @ 1
[ 5.711857] initcall nf_nat_init+0x0/0x111 returned 0 after 8 usecs
[ 5.711977] calling nf_defrag_init+0x0/0x17 @ 1
[ 5.712097] initcall nf_defrag_init+0x0/0x17 returned 0 after 0 usecs
[ 5.712273] calling nf_nat_ftp_init+0x0/0x1f @ 1
[ 5.712393] initcall nf_nat_ftp_init+0x0/0x1f returned 0 after 0 usecs
[ 5.712512] calling init+0x0/0xd7 @ 1
[ 5.712631] initcall init+0x0/0xd7 returned 0 after 0 usecs
[ 5.712806] calling nf_nat_irc_init+0x0/0x1f @ 1
[ 5.712925] initcall nf_nat_irc_init+0x0/0x1f returned 0 after 0 usecs
[ 5.713046] calling nf_nat_sip_init+0x0/0xa9 @ 1
[ 5.713165] initcall nf_nat_sip_init+0x0/0xa9 returned 0 after 0 usecs
[ 5.713342] calling ip_tables_init+0x0/0xaa @ 1
[ 5.713464] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.713584] initcall ip_tables_init+0x0/0xaa returned 0 after 121 usecs
[ 5.713705] calling iptable_filter_init+0x0/0x6f @ 1
[ 5.713901] initcall iptable_filter_init+0x0/0x6f returned 0 after 22 usecs
[ 5.714025] calling iptable_mangle_init+0x0/0x51 @ 1
[ 5.714155] initcall iptable_mangle_init+0x0/0x51 returned 0 after 9 usecs
[ 5.714278] calling nf_nat_standalone_init+0x0/0x59 @ 1
[ 5.714407] initcall nf_nat_standalone_init+0x0/0x59 returned 0 after 8 usecs
[ 5.714584] calling ecn_mt_init+0x0/0x12 @ 1
[ 5.714704] initcall ecn_mt_init+0x0/0x12 returned 0 after 0 usecs
[ 5.714824] calling ecn_tg_init+0x0/0x12 @ 1
[ 5.714942] initcall ecn_tg_init+0x0/0x12 returned 0 after 0 usecs
[ 5.715117] calling log_tg_init+0x0/0x29 @ 1
[ 5.715236] initcall log_tg_init+0x0/0x29 returned 0 after 0 usecs
[ 5.715356] calling masquerade_tg_init+0x0/0x39 @ 1
[ 5.715476] initcall masquerade_tg_init+0x0/0x39 returned 0 after 1 usecs
[ 5.715652] calling netmap_tg_init+0x0/0x12 @ 1
[ 5.715772] initcall netmap_tg_init+0x0/0x12 returned 0 after 0 usecs
[ 5.715894] calling redirect_tg_init+0x0/0x12 @ 1
[ 5.716013] initcall redirect_tg_init+0x0/0x12 returned 0 after 0 usecs
[ 5.716190] calling reject_tg_init+0x0/0x12 @ 1
[ 5.716308] initcall reject_tg_init+0x0/0x12 returned 0 after 0 usecs
[ 5.716428] calling ip_queue_init+0x0/0x13a @ 1
[ 5.716567] initcall ip_queue_init+0x0/0x13a returned 0 after 18 usecs
[ 5.716689] calling inet_diag_init+0x0/0x72 @ 1
[ 5.716816] initcall inet_diag_init+0x0/0x72 returned 0 after 6 usecs
[ 5.716937] calling tcp_diag_init+0x0/0x12 @ 1
[ 5.717057] initcall tcp_diag_init+0x0/0x12 returned 0 after 0 usecs
[ 5.717177] calling bictcp_register+0x0/0x12 @ 1
[ 5.717351] TCP bic registered
[ 5.717468] initcall bictcp_register+0x0/0x12 returned 0 after 113 usecs
[ 5.717590] calling cubictcp_register+0x0/0x6c @ 1
[ 5.717707] TCP cubic registered
[ 5.717881] initcall cubictcp_register+0x0/0x6c returned 0 after 168 usecs
[ 5.718004] calling tcp_westwood_register+0x0/0x12 @ 1
[ 5.718123] TCP westwood registered
[ 5.718240] initcall tcp_westwood_register+0x0/0x12 returned 0 after 113 usecs
[ 5.718495] calling hybla_register+0x0/0x12 @ 1
[ 5.718613] TCP hybla registered
[ 5.718730] initcall hybla_register+0x0/0x12 returned 0 after 112 usecs
[ 5.718850] calling tcp_vegas_register+0x0/0x14 @ 1
[ 5.719023] TCP vegas registered
[ 5.719142] initcall tcp_vegas_register+0x0/0x14 returned 0 after 114 usecs
[ 5.719264] calling inet6_init+0x0/0x2ba @ 1
[ 5.719438] NET: Registered protocol family 10
[ 5.719973] initcall inet6_init+0x0/0x2ba returned 0 after 575 usecs
[ 5.720094] calling tunnel6_init+0x0/0x66 @ 1
[ 5.720203] initcall tunnel6_init+0x0/0x66 returned 0 after 0 usecs
[ 5.720203] calling ip6_tables_init+0x0/0xaa @ 1
[ 5.720203] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 5.720203] initcall ip6_tables_init+0x0/0xaa returned 0 after 174 usecs
[ 5.720203] calling ip6table_filter_init+0x0/0x6f @ 1
[ 5.720890] initcall ip6table_filter_init+0x0/0x6f returned 0 after 27 usecs
[ 5.721012] calling ip6table_mangle_init+0x0/0x51 @ 1
[ 5.721154] initcall ip6table_mangle_init+0x0/0x51 returned 0 after 21 usecs
[ 5.721273] calling nf_conntrack_l3proto_ipv6_init+0x0/0xfc @ 1
[ 5.721398] initcall nf_conntrack_l3proto_ipv6_init+0x0/0xfc returned 0 after 4 usecs
[ 5.721596] calling nf_defrag_init+0x0/0x54 @ 1
[ 5.721715] initcall nf_defrag_init+0x0/0x54 returned 0 after 3 usecs
[ 5.721888] calling log_tg6_init+0x0/0x29 @ 1
[ 5.722004] initcall log_tg6_init+0x0/0x29 returned 0 after 0 usecs
[ 5.722121] calling reject_tg6_init+0x0/0x12 @ 1
[ 5.722237] initcall reject_tg6_init+0x0/0x12 returned 0 after 0 usecs
[ 5.722410] calling sit_init+0x0/0x60 @ 1
[ 5.722524] IPv6 over IPv4 tunneling driver
[ 5.722953] initcall sit_init+0x0/0x60 returned 0 after 416 usecs
[ 5.723074] calling ip6_tunnel_init+0x0/0x8e @ 1
[ 5.723441] initcall ip6_tunnel_init+0x0/0x8e returned 0 after 240 usecs
[ 5.723563] calling packet_init+0x0/0x47 @ 1
[ 5.723682] NET: Registered protocol family 17
[ 5.725984] initcall packet_init+0x0/0x47 returned 0 after 2246 usecs
[ 5.726103] calling br_init+0x0/0xa2 @ 1
[ 5.726302] initcall br_init+0x0/0xa2 returned 0 after 24 usecs
[ 5.726422] calling init_rpcsec_gss+0x0/0x4d @ 1
[ 5.726549] initcall init_rpcsec_gss+0x0/0x4d returned 0 after 8 usecs
[ 5.726669] calling vlan_proto_init+0x0/0x82 @ 1
[ 5.726785] 802.1Q VLAN Support v1.8
[ 5.726970] initcall vlan_proto_init+0x0/0x82 returned 0 after 179 usecs
[ 5.727091] calling init_dns_resolver+0x0/0x108 @ 1
[ 5.727208] Registering the dns_resolver key type
[ 5.727346] initcall init_dns_resolver+0x0/0x108 returned 0 after 132 usecs
[ 5.727467] calling mcheck_debugfs_init+0x0/0x3b @ 1
[ 5.727592] initcall mcheck_debugfs_init+0x0/0x3b returned 0 after 5 usecs
[ 5.727713] calling severities_debugfs_init+0x0/0x3b @ 1
[ 5.727833] initcall severities_debugfs_init+0x0/0x3b returned 0 after 1 usecs
[ 5.728087] calling hpet_insert_resource+0x0/0x23 @ 1
[ 5.728207] initcall hpet_insert_resource+0x0/0x23 returned 1 after 0 usecs
[ 5.728327] initcall hpet_insert_resource+0x0/0x23 returned with error code 1
[ 5.728526] calling lapic_insert_resource+0x0/0x3f @ 1
[ 5.728701] initcall lapic_insert_resource+0x0/0x3f returned 0 after 2 usecs
[ 5.728822] calling io_apic_bug_finalize+0x0/0x1b @ 1
[ 5.728940] initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs
[ 5.729060] calling check_early_ioremap_leak+0x0/0x50 @ 1
[ 5.729232] initcall check_early_ioremap_leak+0x0/0x50 returned 0 after 0 usecs
[ 5.729431] calling pat_memtype_list_init+0x0/0x32 @ 1
[ 5.729563] initcall pat_memtype_list_init+0x0/0x32 returned 0 after 14 usecs
[ 5.729684] calling sched_init_debug+0x0/0x24 @ 1
[ 5.729806] initcall sched_init_debug+0x0/0x24 returned 0 after 1 usecs
[ 5.729927] calling init_oops_id+0x0/0x31 @ 1
[ 5.730046] initcall init_oops_id+0x0/0x31 returned 0 after 3 usecs
[ 5.730222] calling printk_late_init+0x0/0x50 @ 1
[ 5.730342] initcall printk_late_init+0x0/0x50 returned 0 after 1 usecs
[ 5.730461] calling pm_qos_power_init+0x0/0xca @ 1
[ 5.730899] initcall pm_qos_power_init+0x0/0xca returned 0 after 310 usecs
[ 5.731020] calling alarmtimer_init_late+0x0/0x73 @ 1
[ 5.731143] initcall alarmtimer_init_late+0x0/0x73 returned 0 after 2 usecs
[ 5.731263] calling clear_boot_tracer+0x0/0x2d @ 1
[ 5.731379] initcall clear_boot_tracer+0x0/0x2d returned 0 after 0 usecs
[ 5.731555] calling max_swapfiles_check+0x0/0x8 @ 1
[ 5.731675] initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs
[ 5.731798] calling set_recommended_min_free_kbytes+0x0/0x82 @ 1
[ 5.731919] initcall set_recommended_min_free_kbytes+0x0/0x82 returned 0 after 0 usecs
[ 5.732176] calling random32_reseed+0x0/0xb3 @ 1
[ 5.732303] initcall random32_reseed+0x0/0xb3 returned 0 after 5 usecs
[ 5.732424] calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1
[ 5.732548] initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 2 usecs
[ 5.732804] calling pci_sysfs_init+0x0/0x51 @ 1
[ 5.733237] initcall pci_sysfs_init+0x0/0x51 returned 0 after 305 usecs
[ 5.733358] calling boot_wait_for_devices+0x0/0x30 @ 1
[ 5.733478] initcall boot_wait_for_devices+0x0/0x30 returned 0 after 1 usecs
[ 5.733600] calling seqgen_init+0x0/0xf @ 1
[ 5.733729] initcall seqgen_init+0x0/0xf returned 0 after 11 usecs
[ 5.733906] calling scsi_complete_async_scans+0x0/0x11b @ 1
[ 5.734025] initcall scsi_complete_async_scans+0x0/0x11b returned 0 after 0 usecs
[ 5.734224] calling rtc_hctosys+0x0/0x10d @ 1
[ 5.734395] rtc_cmos 00:05: setting system clock to 2011-06-14 00:04:04 UTC (1308009844)
[ 5.734652] initcall rtc_hctosys+0x0/0x10d returned 0 after 304 usecs
[ 5.734774] calling powernowk8_init+0x0/0x1bf @ 1
[ 5.734895] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ (1 cpu cores) (version 2.20.00)
[ 5.742439] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 5.742559] powernow-k8: fid 0xa (1800 MHz), vid 0xa
[ 5.742676] powernow-k8: fid 0xc (2000 MHz), vid 0x8
[ 5.742793] powernow-k8: fid 0xe (2200 MHz), vid 0x8
[ 5.742930] last_index set to -1 in cpufreq_stats_create_table!
[ 5.743108] Marking TSC unstable due to cpufreq changes
[ 5.743455] powernow-k8: fid trans failed, fid 0xa, curr 0x0
[ 5.743573] cpufreq_stats_update: cpu=0
[ 5.743611] max_state=4 last_index=0
[ 5.743834] powernow-k8: transition frequency failed
[ 5.744317] powernow-k8: fid trans failed, fid 0xa, curr 0x0
[ 5.744435] cpufreq_stats_update: cpu=0
[ 5.744473] max_state=4 last_index=0
[ 5.744695] powernow-k8: transition frequency failed
[ 5.745215] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 5.745503] initcall powernowk8_init+0x0/0x1bf returned 0 after 10361 usecs
[ 5.745627] calling acpi_cpufreq_init+0x0/0xc1 @ 1
[ 5.745753] initcall acpi_cpufreq_init+0x0/0xc1 returned -16 after 6 usecs
[ 5.745874] initcall acpi_cpufreq_init+0x0/0xc1 returned with error code -16
[ 5.745994] calling memmap_init+0x0/0x34 @ 1
[ 5.746291] initcall memmap_init+0x0/0x34 returned 0 after 35 usecs
[ 5.746413] calling pci_mmcfg_late_insert_resources+0x0/0x5e @ 1
[ 5.746535] initcall pci_mmcfg_late_insert_resources+0x0/0x5e returned 1 after 0 usecs
[ 5.746735] initcall pci_mmcfg_late_insert_resources+0x0/0x5e returned with error code 1
[ 5.746934] calling tcp_congestion_default+0x0/0x12 @ 1
[ 5.747195] initcall tcp_congestion_default+0x0/0x12 returned 0 after 0 usecs
[ 5.747317] calling ip_auto_config+0x0/0xd7b @ 1
[ 5.747439] initcall ip_auto_config+0x0/0xd7b returned 0 after 5 usecs
[ 5.747559] calling initialize_hashrnd+0x0/0x19 @ 1
[ 5.747824] initcall initialize_hashrnd+0x0/0x19 returned 0 after 2 usecs
[ 5.748026] async_waiting @ 1
[ 5.748142] async_continuing @ 1 after 0 usec
[ 5.748266] md: Waiting for all devices to be available before autodetect
[ 5.748384] md: If you don't use raid, use raid=noautodetect
[ 5.748504] async_waiting @ 1
[ 5.748763] async_continuing @ 1 after 0 usec
[ 5.749117] md: Autodetecting RAID arrays.
[ 5.889913] md: Scanned 8 and added 8 devices.
[ 5.890030] md: autorun ...
[ 5.890145] md: considering sdb5 ...
[ 5.890280] md: adding sdb5 ...
[ 5.890398] md: sdb3 has different UUID to sdb5
[ 5.890518] md: sdb2 has different UUID to sdb5
[ 5.890635] md: sdb1 has different UUID to sdb5
[ 5.890755] md: adding sda5 ...
[ 5.891018] md: sda3 has different UUID to sdb5
[ 5.891135] md: sda2 has different UUID to sdb5
[ 5.891251] md: sda1 has different UUID to sdb5
[ 5.891576] md: created md3
[ 5.891695] md: bind<sda5>
[ 5.891817] md: bind<sdb5>
[ 5.891936] md: running: <sdb5><sda5>
[ 5.892386] bio: create slab <bio-1> at 1
[ 5.892646] md/raid1:md3: active with 2 out of 2 mirrors
[ 5.892794] md3: detected capacity change from 0 to 309644754944
[ 5.892975] md: considering sdb3 ...
[ 5.893097] md: adding sdb3 ...
[ 5.893215] md: sdb2 has different UUID to sdb3
[ 5.893333] md: sdb1 has different UUID to sdb3
[ 5.893453] md: adding sda3 ...
[ 5.893713] md: sda2 has different UUID to sdb3
[ 5.893833] md: sda1 has different UUID to sdb3
[ 5.894175] md: created md2
[ 5.894290] md: bind<sda3>
[ 5.894422] md: bind<sdb3>
[ 5.894543] md: running: <sdb3><sda3>
[ 5.895100] md/raid1:md2: active with 2 out of 2 mirrors
[ 5.895242] md2: detected capacity change from 0 to 7999520768
[ 5.895417] md: considering sdb2 ...
[ 5.895538] md: adding sdb2 ...
[ 5.895657] md: sdb1 has different UUID to sdb2
[ 5.895777] md: adding sda2 ...
[ 5.895893] md: sda1 has different UUID to sdb2
[ 5.896350] md: created md1
[ 5.896467] md: bind<sda2>
[ 5.896588] md: bind<sdb2>
[ 5.896707] md: running: <sdb2><sda2>
[ 5.897266] md/raid1:md1: active with 2 out of 2 mirrors
[ 5.897408] md1: detected capacity change from 0 to 271319040
[ 5.897584] md: considering sdb1 ...
[ 5.897706] md: adding sdb1 ...
[ 5.897825] md: adding sda1 ...
[ 5.897945] md: created md0
[ 5.898060] md: bind<sda1>
[ 5.898179] md: bind<sdb1>
[ 5.898298] md: running: <sdb1><sda1>
[ 5.898870] md/raid1:md0: active with 2 out of 2 mirrors
[ 5.899009] md0: detected capacity change from 0 to 2152923136
[ 5.899184] md: ... autorun DONE.
[ 5.924550] md2: unknown partition table
[ 5.925419] EXT3-fs (md2): recovery required on readonly filesystem
[ 5.925539] EXT3-fs (md2): write access will be enabled during recovery
[ 5.932059] EXT3-fs: barriers not enabled
[ 5.998525] kjournald starting. Commit interval 5 seconds
[ 5.998685] EXT3-fs (md2): recovery complete
[ 5.999503] EXT3-fs (md2): mounted filesystem with writeback data mode
[ 5.999640] VFS: Mounted root (ext3 filesystem) readonly on device 9:2.
[ 6.023713] devtmpfs: mounted
[ 6.023836] async_waiting @ 1
[ 6.023951] async_continuing @ 1 after 0 usec
[ 6.024384] Freeing unused kernel memory: 576k freed
[ 6.024817] Write protecting the kernel read-only data: 10240k
[ 6.031696] Freeing unused kernel memory: 4k freed
[ 6.032397] Freeing unused kernel memory: 964k freed
[ 6.389662] /etc/rcS.d/S01mountkernfs.sh start
[ 6.569431] splash_progress 2
[ 6.572049] /etc/rcS.d/S02udev start
[ 6.721309] udev[825]: starting version 164
[ 7.493847] md1: unknown partition table
[ 7.500638] md0: unknown partition table
[ 7.510452] md3: unknown partition table
[ 7.890275] splash_progress 4
[ 7.890646] /etc/rcS.d/S03mdadm-raid start
[ 7.921170] splash_progress 6
[ 7.921357] /etc/rcS.d/S03mountdevsubfs.sh start
[ 7.945936] splash_progress 8
[ 7.946300] /etc/rcS.d/S04bootlogd start
[ 7.975940] splash_progress 11
[ 7.976289] /etc/rcS.d/S05keyboard-setup start
[ 8.179187] splash_progress 13
[ 8.179595] /etc/rcS.d/S06hostname.sh start
[ 8.193791] splash_progress 15
[ 8.193984] /etc/rcS.d/S06hwclockfirst.sh start
[ 8.197644] splash_progress 17
[ 8.197830] /etc/rcS.d/S06lvm2 start
[ 8.630873] splash_progress 19
[ 8.631231] /etc/rcS.d/S07checkroot.sh start
[ 8.668326] Adding 2102460k swap on /dev/md0. Priority:-1 extents:1 across:2102460k
[ 8.689279] EXT3-fs (md2): using internal journal
[ 8.718190] splash_progress 22
[ 8.718634] /etc/rcS.d/S08hwclock.sh start
[ 8.722445] splash_progress 24
[ 8.722636] /etc/rcS.d/S08ifupdown-clean start
[ 8.751396] splash_progress 26
[ 8.751588] /etc/rcS.d/S08module-init-tools start
[ 8.772291] splash_progress 28
[ 8.772481] /etc/rcS.d/S08mtab.sh start
[ 8.903534] splash_progress 30
[ 8.903914] /etc/rcS.d/S09checkfs.sh start
[ 8.993725] splash_progress 33
[ 8.994107] /etc/rcS.d/S10ifupdown start
[ 9.012641] splash_progress 35
[ 9.012832] /etc/rcS.d/S10mountall.sh start
[ 9.142456] EXT3-fs: barriers not enabled
[ 9.150441] kjournald starting. Commit interval 5 seconds
[ 9.150577] EXT3-fs (md1): warning: maximal mount count reached, running e2fsck is recommended
[ 9.173004] EXT3-fs (md1): using internal journal
[ 9.173124] EXT3-fs (md1): recovery complete
[ 9.173245] EXT3-fs (md1): mounted filesystem with writeback data mode
[ 9.273359] splash_progress 37
[ 9.273709] /etc/rcS.d/S11mountall-bootclean.sh start
[ 9.346975] splash_progress 39
[ 9.347320] /etc/rcS.d/S12mountoverflowtmp start
[ 9.366766] splash_progress 41
[ 9.367202] /etc/rcS.d/S13networking start
[ 9.375051] Configuring network interfaces
[ 10.102338] netconsole: network logging stopped on interface eth0 as it is joining a master device
[ 10.102579] device eth0 entered promiscuous mode
[ 10.129521] br0: port 1(eth0) entering forwarding state
[ 10.129648] br0: port 1(eth0) entering forwarding state
[ 11.120061] br0: port 1(eth0) entering forwarding state
[ 11.354514] network interfaces configured
[ 11.355019] splash_progress 44
[ 11.355182] /etc/rcS.d/S13procps start
[ 11.394428] splash_progress 46
[ 11.394593] /etc/rcS.d/S13udev-mtab start
[ 11.407610] splash_progress 48
[ 11.407782] /etc/rcS.d/S13urandom start
[ 11.455954] splash_progress 50
[ 11.456291] /etc/rcS.d/S14mountnfs.sh start
[ 11.465652] splash_progress 52
[ 11.465967] /etc/rcS.d/S15mountnfs-bootclean.sh start
[ 11.507086] splash_progress 55
[ 11.507397] /etc/rcS.d/S16kbd start
[ 11.629998] splash_progress 57
[ 11.630384] /etc/rcS.d/S17console-setup start
[ 11.875413] splash_progress 59
[ 11.929333] /etc/rcS.d/S18bootmisc.sh start
[ 11.962891] splash_progress 61
[ 11.963067] /etc/rcS.d/S18screen-cleanup start
[ 12.002976] splash_progress 63
[ 12.003310] /etc/rcS.d/S19stop-bootlogd-single start
[ 12.008616] splash_progress 66
[ 12.027549] /etc/rc2.d/S01rsyslog start
[ 12.235453] splash_progress 67
[ 12.235621] /etc/rc2.d/S01sudo start
[ 12.276384] splash_progress 69
[ 12.276554] /etc/rc2.d/S01xend start
[ 12.418770] XENBUS: Unable to read cpu state
[ 15.817960] splash_progress 71
[ 15.818496] /etc/rc2.d/S02acpid start
[ 15.860059] eth0: no IPv6 routers present
[ 15.907526] splash_progress 73
[ 15.907693] /etc/rc2.d/S02bind9 start
[ 16.305255] splash_progress 75
[ 16.305421] /etc/rc2.d/S02loadcpufreq start
[ 16.393566] splash_progress 77
[ 16.393731] /etc/rc2.d/S02mdadm start
[ 16.428486] splash_progress 78
[ 16.428653] /etc/rc2.d/S02ntp start
[ 16.542324] splash_progress 80
[ 16.542491] /etc/rc2.d/S02smartmontools start
[ 16.561341] splash_progress 82
[ 16.561507] /etc/rc2.d/S02ssh start
[ 16.723889] sshd (1747): /proc/1747/oom_adj is deprecated, please use /proc/1747/oom_score_adj instead.
[ 16.740918] splash_progress 84
[ 16.741085] /etc/rc2.d/S02xendomains start
[ 17.897128] splash_progress 86
[ 17.897587] /etc/rc2.d/S03bootlogs start
[ 18.090151] splash_progress 88
[ 18.090327] /etc/rc2.d/S03cpufrequtils start
[ 18.143342] powernow-k8: fid trans failed, fid 0x2, curr 0x0
[ 18.143543] cpufreq_stats_update: cpu=0
[ 18.143578] max_state=4 last_index=0
[ 18.143796] powernow-k8: transition frequency failed
[ 18.144973] splash_progress 89
[ 18.145136] /etc/rc2.d/S03cron start
[ 18.363744] splash_progress 91
[ 18.363909] /etc/rc2.d/S03rsync start
[ 18.371345] splash_progress 93
[ 18.371722] /etc/rc2.d/S04rc.local start
[ 18.389909] splash_progress 95
[ 18.390299] /etc/rc2.d/S04rmnologin start
[ 18.401564] splash_progress 97
[ 18.401738] /etc/rc2.d/S04stop-bootlogd start
[ 19.440417] powernow-k8: fid trans failed, fid 0x2, curr 0x0
[ 19.442724] cpufreq_stats_update: cpu=0
[ 19.442759] max_state=4 last_index=0
[ 19.442978] powernow-k8: transition frequency failed
[ 19.511011] splash_progress 99
--
Tobias PGP: http://8ef7ddba.uguu.de
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Xen-users] 3.0.0-rc2: Xen: High amount of kernel "reserved" memory, about 33% in 256MB DOMU
2011-06-13 21:59 ` Konrad Rzeszutek Wilk
2011-06-14 0:10 ` Tobias Diedrich
@ 2011-06-14 21:14 ` Tobias Diedrich
1 sibling, 0 replies; 6+ messages in thread
From: Tobias Diedrich @ 2011-06-14 21:14 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: xen-users, linux-kernel
Konrad Rzeszutek Wilk wrote:
> On Mon, Jun 13, 2011 at 10:50:03PM +0200, Tobias Diedrich wrote:
> > Hi,
> >
> > another issue I'm seeing with 3.0-rc2 and Xen is that there is an
> > unexpectedly high amount of kernel reserved memory.
>
> >
> > I suspect that Linux allocates page table entries and corresponding
> > data structures for the whole 6GB areas of the provided 'physical
> > RAM map' even though it has rather big unusable holes in it.
>
> Can you run it with 'memblock=debug debug loglevel=8 initcall_debug'?
> It should tell you where it tries (and for much space) the pagetables.
Here is a diff between verbose domu with and without mem=256M
(with "s@after [0-9]* usecs@after XX usecs@g" to suppress the
timing differences somewhat)
--- noextraopts 2011-06-14 23:02:24.549323941 +0200
+++ mem256 2011-06-14 23:01:46.140538541 +0200
@@ -1,7 +1,7 @@
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.0.0-rc2 (ranma@nukunuku) (gcc version 4.5.2 (Debian 4.5.2-11) ) #53 SMP Tue Jun 14 15:33:45 CEST 2011
-Command line: root=/dev/xvda1 memblock=debug debug loglevel=8 initcall_debug ro ip=192.168.12.1:127.0.255.255:192.168.12.2:255.255.255.0:yumi.uguu.de:eth0:off 4
+Command line: root=/dev/xvda1 memblock=debug debug loglevel=8 initcall_debug ro mem=256M ip=192.168.12.1:127.0.255.255:192.168.12.2:255.255.255.0:yumi.uguu.de:eth0:off 4
ACPI in unprivileged domain disabled
released 0 pages of unused memory
Set 0 page(s) to 1-1 mapping.
@@ -10,22 +10,25 @@
Xen: 00000000000a0000 - 0000000000100000 (reserved)
Xen: 0000000000100000 - 0000000010000000 (usable)
Xen: 0000000100000000 - 0000000100800000 (usable)
+e820 remove range: 0000000010000000 - ffffffffffffffff (usable)
NX (Execute Disable) protection: active
MPS support code is not built-in.
Using acpi=off or acpi=noirq or pci=noacpi may have problem
+user-defined physical RAM map:
+ user: 0000000000000000 - 00000000000a0000 (usable)
+ user: 00000000000a0000 - 0000000000100000 (reserved)
+ user: 0000000000100000 - 0000000010000000 (usable)
DMI not present or invalid.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
-last_pfn = 0x100800 max_arch_pfn = 0x400000000
last_pfn = 0x10000 max_arch_pfn = 0x400000000
memblock_x86_reserve_range: [0x01ce8000-0x01cf8fff] BRK
MEMBLOCK configuration:
- memory size = 0x10790000
- memory.cnt = 0x3
+ memory size = 0xff90000
+ memory.cnt = 0x2
memory[0x0] [0x00000000010000-0x0000000009ffff], 0x90000 bytes
memory[0x1] [0x00000000100000-0x0000000fffffff], 0xff00000 bytes
- memory[0x2] [0x00000100000000-0x000001007fffff], 0x800000 bytes
reserved.cnt = 0x3
reserved[0x0] [0x00000001000000-0x00000001cf8fff], 0xcf9000 bytes
reserved[0x1] [0x00000001e1e000-0x00000001eb3fff], 0x96000 bytes
@@ -38,123 +41,109 @@
kernel direct mapping tables up to 10000000 @ ff7e000-10000000
memblock_x86_reserve_range: [0x0ff7e000-0x0ffe9fff] PGTABLE
xen: setting RW the range ffea000 - 10000000
-init_memory_mapping: 0000000100000000-0000000100800000
- 0100000000 - 0100800000 page 4k
-kernel direct mapping tables up to 100800000 @ f774000-ff7e000
- memblock_x86_reserve_range: [0x0f774000-0x0f778fff] PGTABLE
-xen: setting RW the range f779000 - ff7e000
memblock_x86_reserve_range: [0x0ffff000-0x0fffffff] BOOTMEM
memblock_x86_reserve_range: [0x0fb7e000-0x0ff7dfff] BOOTMEM
- memblock_x86_reserve_range: [0x0fffef80-0x0fffefc7] BOOTMEM
+ memblock_x86_reserve_range: [0x0fffefc0-0x0fffefef] BOOTMEM
memblock_x86_reserve_range: [0x0f77e000-0x0fb7dfff] BOOTMEM
- memblock_x86_reserve_range: [0x0f000000-0x0f5fffff] BOOTMEM
+ memblock_x86_reserve_range: [0x0f200000-0x0f5fffff] BOOTMEM
memblock_x86_reserve_range: [0x0fffd000-0x0fffdfff] BOOTMEM
memblock_x86_reserve_range: [0x0fffc000-0x0fffcfff] BOOTMEM
memblock_x86_reserve_range: [0x0fffb000-0x0fffbfff] BOOTMEM
memblock_x86_reserve_range: [0x0fffa000-0x0fffafff] BOOTMEM
- memblock_x86_reserve_range: [0x0fff9000-0x0fff9fff] BOOTMEM
- memblock_x86_free_range: [0x0f540000-0x0f5fffff]
+ memblock_x86_free_range: [0x0f580000-0x0f5fffff]
memblock_x86_free_range: [0x0f77e000-0x0fb7dfff]
memblock_x86_free_range: [0x0fb7e000-0x0ff7dfff]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
- Normal 0x00100000 -> 0x00100800
+ Normal empty
Movable zone start PFN for each node
-early_node_map[3] active PFN ranges
+early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x000000a0
0: 0x00000100 -> 0x00010000
- 0: 0x00100000 -> 0x00100800
-On node 0 totalpages: 67472
+On node 0 totalpages: 65424
DMA zone: 56 pages used for memmap
DMA zone: 2 pages reserved
DMA zone: 3926 pages, LIFO batch:0
- memblock_x86_reserve_range: [0x0fffee00-0x0fffef7f] BOOTMEM
- DMA32 zone: 14280 pages used for memmap
- DMA32 zone: 47160 pages, LIFO batch:15
- memblock_x86_reserve_range: [0x0ff66000-0x0ff7dfff] BOOTMEM
- Normal zone: 28 pages used for memmap
- Normal zone: 2020 pages, LIFO batch:0
- memblock_x86_reserve_range: [0x0fffed40-0x0fffedff] BOOTMEM
- memblock_x86_reserve_range: [0x0fff8000-0x0fff8fff] BOOTMEM
+ memblock_x86_reserve_range: [0x0fffee40-0x0fffefbf] BOOTMEM
+ DMA32 zone: 840 pages used for memmap
+ DMA32 zone: 60600 pages, LIFO batch:15
+ memblock_x86_reserve_range: [0x0fff8800-0x0fff9fff] BOOTMEM
memblock_x86_reserve_range: [0x0fff7000-0x0fff7fff] BOOTMEM
memblock_x86_reserve_range: [0x0fff6000-0x0fff6fff] BOOTMEM
+ memblock_x86_reserve_range: [0x0fff5000-0x0fff5fff] BOOTMEM
SMP: Allowing 1 CPUs, 0 hotplug CPUs
No local APIC present
APIC: disable apic facility
APIC: switched to apic NOOP
nr_irqs_gsi: 16
- memblock_x86_reserve_range: [0x0fffec00-0x0fffed17] BOOTMEM
- memblock_x86_reserve_range: [0x0fffeb80-0x0fffebe7] BOOTMEM
- memblock_x86_reserve_range: [0x0fffeb00-0x0fffeb67] BOOTMEM
- memblock_x86_reserve_range: [0x0fffea80-0x0fffeae7] BOOTMEM
- memblock_x86_reserve_range: [0x0fffea00-0x0fffea67] BOOTMEM
+ memblock_x86_reserve_range: [0x0fffed40-0x0fffee1f] BOOTMEM
+ memblock_x86_reserve_range: [0x0fffecc0-0x0fffed27] BOOTMEM
+ memblock_x86_reserve_range: [0x0fffec40-0x0fffeca7] BOOTMEM
+ memblock_x86_reserve_range: [0x0fffebc0-0x0fffec27] BOOTMEM
+ memblock_x86_reserve_range: [0x0fffeb40-0x0fffeba7] BOOTMEM
Allocating PCI resources starting at 10000000 (gap: 10000000:f0000000)
Booting paravirtualized kernel on Xen
Xen version: 4.1.0 (preserve-AD)
- memblock_x86_reserve_range: [0x0fffe940-0x0fffe9d2] BOOTMEM
- memblock_x86_reserve_range: [0x0fffe880-0x0fffe912] BOOTMEM
+ memblock_x86_reserve_range: [0x0fffea80-0x0fffeb1b] BOOTMEM
+ memblock_x86_reserve_range: [0x0fffe9c0-0x0fffea5b] BOOTMEM
setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:1 nr_node_ids:1
- memblock_x86_reserve_range: [0x0fff5000-0x0fff5fff] BOOTMEM
memblock_x86_reserve_range: [0x0fff4000-0x0fff4fff] BOOTMEM
- memblock_x86_reserve_range: [0x0ff4b000-0x0ff65fff] BOOTMEM
-PERCPU: Embedded 27 pages/cpu @ffff88000ff4b000 s79488 r8192 d22912 u110592
- memblock_x86_reserve_range: [0x0fffe840-0x0fffe847] BOOTMEM
- memblock_x86_reserve_range: [0x0fffe800-0x0fffe807] BOOTMEM
- memblock_x86_reserve_range: [0x0fffe7c0-0x0fffe7c3] BOOTMEM
- memblock_x86_reserve_range: [0x0fffe780-0x0fffe787] BOOTMEM
+ memblock_x86_reserve_range: [0x0fff3000-0x0fff3fff] BOOTMEM
+ memblock_x86_reserve_range: [0x0ff63000-0x0ff7dfff] BOOTMEM
+PERCPU: Embedded 27 pages/cpu @ffff88000ff63000 s79488 r8192 d22912 u110592
+ memblock_x86_reserve_range: [0x0fffe980-0x0fffe987] BOOTMEM
+ memblock_x86_reserve_range: [0x0fffe940-0x0fffe947] BOOTMEM
+ memblock_x86_reserve_range: [0x0fffe900-0x0fffe903] BOOTMEM
+ memblock_x86_reserve_range: [0x0fffe8c0-0x0fffe8c7] BOOTMEM
pcpu-alloc: s79488 r8192 d22912 u110592 alloc=27*4096
pcpu-alloc: [0] 0
- memblock_x86_reserve_range: [0x0fffe680-0x0fffe77f] BOOTMEM
- memblock_x86_reserve_range: [0x0fffe600-0x0fffe647] BOOTMEM
- memblock_x86_reserve_range: [0x0fffe580-0x0fffe5c7] BOOTMEM
- memblock_x86_free_range: [0x0fff5000-0x0fff5fff]
+ memblock_x86_reserve_range: [0x0fffe7c0-0x0fffe8bf] BOOTMEM
+ memblock_x86_reserve_range: [0x0fffe740-0x0fffe787] BOOTMEM
+ memblock_x86_reserve_range: [0x0fffe6c0-0x0fffe707] BOOTMEM
memblock_x86_free_range: [0x0fff4000-0x0fff4fff]
-Built 1 zonelists in Zone order, mobility grouping on. Total pages: 53106
-Kernel command line: root=/dev/xvda1 memblock=debug debug loglevel=8 initcall_debug ro ip=192.168.12.1:127.0.255.255:192.168.12.2:255.255.255.0:yumi.uguu.de:eth0:off 4
- memblock_x86_reserve_range: [0x0fff4000-0x0fff5fff] BOOTMEM
+ memblock_x86_free_range: [0x0fff3000-0x0fff3fff]
+Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64526
+Kernel command line: root=/dev/xvda1 memblock=debug debug loglevel=8 initcall_debug ro mem=256M ip=192.168.12.1:127.0.255.255:192.168.12.2:255.255.255.0:yumi.uguu.de:eth0:off 4
+ memblock_x86_reserve_range: [0x0fff3000-0x0fff4fff] BOOTMEM
PID hash table entries: 1024 (order: 1, 8192 bytes)
- memblock_x86_reserve_range: [0x0ff0b000-0x0ff4afff] BOOTMEM
+ memblock_x86_reserve_range: [0x0ff23000-0x0ff62fff] BOOTMEM
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
- memblock_x86_reserve_range: [0x0feeb000-0x0ff0afff] BOOTMEM
+ memblock_x86_reserve_range: [0x0ff03000-0x0ff22fff] BOOTMEM
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
- memblock_x86_reserve_range: [0x0b000000-0x0effffff] BOOTMEM
- memblock_x86_reserve_range: [0x0fecb000-0x0feeafff] BOOTMEM
- memblock_x86_reserve_range: [0x0fe8b000-0x0fecafff] BOOTMEM
- memblock_x86_reserve_range: [0x0ffec000-0x0fff3fff] BOOTMEM
Checking aperture...
No AGP bridge found
Subtract (23 early reservations)
[000009e000-000009ffff]
[0001000000-0001cf8fff]
[0001e1e000-0001eb3fff]
- [000b000000-000f53ffff]
- [000f774000-000f778fff]
- [000fe8b000-000ffe9fff]
- [000ffec000-000fffdfff]
- [000fffe580-000fffe5c7]
- [000fffe600-000fffe647]
- [000fffe680-000fffe787]
- [000fffe7c0-000fffe7c3]
- [000fffe800-000fffe807]
- [000fffe840-000fffe847]
- [000fffe880-000fffe912]
- [000fffe940-000fffe9d2]
- [000fffea00-000fffea67]
- [000fffea80-000fffeae7]
- [000fffeb00-000fffeb67]
- [000fffeb80-000fffebe7]
- [000fffec00-000fffed17]
- [000fffed40-000fffefc7]
+ [000f200000-000f57ffff]
+ [000ff03000-000ffe9fff]
+ [000fff3000-000fff7fff]
+ [000fff8800-000fffdfff]
+ [000fffe6c0-000fffe707]
+ [000fffe740-000fffe787]
+ [000fffe7c0-000fffe8c7]
+ [000fffe900-000fffe903]
+ [000fffe940-000fffe947]
+ [000fffe980-000fffe987]
+ [000fffe9c0-000fffea5b]
+ [000fffea80-000fffeb1b]
+ [000fffeb40-000fffeba7]
+ [000fffebc0-000fffec27]
+ [000fffec40-000fffeca7]
+ [000fffecc0-000fffed27]
+ [000fffed40-000fffee1f]
+ [000fffee40-000fffefef]
[000ffff000-000fffffff]
[0100000000-01007fffff]
-Memory: 175388k/4202496k available (6122k kernel code, 3932608k absent, 94500k reserved, 4761k data, 576k init)
+Memory: 243244k/262144k available (6122k kernel code, 448k absent, 18452k reserved, 4761k data, 576k init)
Hierarchical RCU implementation.
NR_IRQS:320
Console: colour dummy device 80x25
console [tty0] enabled
console [hvc0] enabled
-allocated 3145728 bytes of page_cgroup
+allocated 2097152 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
@@ -244,8 +233,8 @@
initcall debugfs_init+0x0/0x5c returned 0 after XX usecs
calling calibrate_xor_blocks+0x0/0xa0 @ 1
xor: automatically using best checksumming function: generic_sse
- generic_sse: 2901.200 MB/sec
-xor: using function: generic_sse (2901.200 MB/sec)
+ generic_sse: 2833.600 MB/sec
+xor: using function: generic_sse (2833.600 MB/sec)
initcall calibrate_xor_blocks+0x0/0xa0 returned 0 after XX usecs
calling random32_init+0x0/0xd8 @ 1
initcall random32_init+0x0/0xd8 returned 0 after XX usecs
@@ -336,14 +325,14 @@
calling genhd_device_init+0x0/0x7c @ 1
initcall genhd_device_init+0x0/0x7c returned 0 after XX usecs
calling raid6_select_algo+0x0/0x1bd @ 1
-raid6: int64x1 2032 MB/s
-raid6: int64x2 2398 MB/s
-raid6: int64x4 1711 MB/s
-raid6: int64x8 1243 MB/s
-raid6: sse2x1 1750 MB/s
-raid6: sse2x2 2362 MB/s
-raid6: sse2x4 1807 MB/s
-raid6: using algorithm sse2x2 (2362 MB/s)
+raid6: int64x1 2027 MB/s
+raid6: int64x2 2392 MB/s
+raid6: int64x4 1703 MB/s
+raid6: int64x8 1241 MB/s
+raid6: sse2x1 1810 MB/s
+raid6: sse2x2 2515 MB/s
+raid6: sse2x4 3221 MB/s
+raid6: using algorithm sse2x4 (3221 MB/s)
initcall raid6_select_algo+0x0/0x1bd returned 0 after XX usecs
calling pci_slot_init+0x0/0x46 @ 1
initcall pci_slot_init+0x0/0x46 returned 0 after XX usecs
@@ -362,7 +351,7 @@
initcall xen_setup_shutdown_event+0x0/0x22 returned 0 after XX usecs
calling balloon_init+0x0/0x130 @ 1
xen/balloon: Initialising balloon driver.
-last_pfn = 0x100800 max_arch_pfn = 0x400000000
+last_pfn = 0x10000 max_arch_pfn = 0x400000000
initcall balloon_init+0x0/0x130 returned 0 after XX usecs
calling xenbus_probe_backend_init+0x0/0x2d @ 1
initcall xenbus_probe_backend_init+0x0/0x2d returned 0 after XX usecs
@@ -499,9 +488,6 @@
calling populate_rootfs+0x0/0x9e @ 1
initcall populate_rootfs+0x0/0x9e returned 0 after XX usecs
calling pci_iommu_init+0x0/0x41 @ 1
-PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
-Placing 64MB software IO TLB between ffff88000b000000 - ffff88000f000000
-software IO TLB at phys 0xb000000 - 0xf000000
initcall pci_iommu_init+0x0/0x41 returned 0 after XX usecs
calling irqfd_module_init+0x0/0x31 @ 1
initcall irqfd_module_init+0x0/0x31 returned 0 after XX usecs
@@ -728,7 +714,7 @@
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
initcall init_xfs_fs+0x0/0xa9 returned 0 after XX usecs
calling ipc_init+0x0/0x23 @ 1
-msgmni has been set to 342
+msgmni has been set to 475
initcall ipc_init+0x0/0x23 returned 0 after XX usecs
calling ipc_sysctl_init+0x0/0x14 @ 1
initcall ipc_sysctl_init+0x0/0x14 returned 0 after XX usecs
@@ -864,7 +850,6 @@
calling xen_blkif_init+0x0/0x276 @ 1
initcall xen_blkif_init+0x0/0x276 returned 0 after XX usecs
calling init_sd+0x0/0x112 @ 1
-blkfront: xvda2: flush diskcache: enabled
initcall init_sd+0x0/0x112 returned 0 after XX usecs
calling init_sr+0x0/0x46 @ 1
initcall init_sr+0x0/0x46 returned 0 after XX usecs
@@ -885,6 +870,7 @@
calling pdc2027x_init+0x0/0x1b @ 1
initcall pdc2027x_init+0x0/0x1b returned 0 after XX usecs
calling sil680_init+0x0/0x1b @ 1
+blkfront: xvda2: flush diskcache: enabled
initcall sil680_init+0x0/0x1b returned 0 after XX usecs
calling via_init+0x0/0x1b @ 1
initcall via_init+0x0/0x1b returned 0 after XX usecs
@@ -1210,7 +1196,7 @@
calling nfnetlink_log_init+0x0/0xd7 @ 1
initcall nfnetlink_log_init+0x0/0xd7 returned 0 after XX usecs
calling nf_conntrack_standalone_init+0x0/0x12 @ 1
-nf_conntrack version 0.5.0 (1370 buckets, 5480 max)
+nf_conntrack version 0.5.0 (1900 buckets, 7600 max)
initcall nf_conntrack_standalone_init+0x0/0x12 returned 0 after XX usecs
calling ctnetlink_init+0x0/0x76 @ 1
ctnetlink v0.93: registering with nfnetlink.
@@ -1468,16 +1454,19 @@
calling initialize_hashrnd+0x0/0x19 @ 1
initcall initialize_hashrnd+0x0/0x19 returned 0 after XX usecs
async_waiting @ 1
-async_continuing @ 1 after 0 usec
+async_continuing @ 1 after 44 usec
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
async_waiting @ 1
-async_continuing @ 1 after 0 usec
+async_continuing @ 1 after 3 usec
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3-fs (xvda1): error: couldn't mount because of unsupported optional features (240)
-EXT2-fs (xvda1): error: couldn't mount because of unsupported optional features (240)
+EXT2-fs (xvda1): error: couldn't mount because of unsupported optional features (244)
+EXT4-fs (xvda1): INFO: recovery required on readonly filesystem
+EXT4-fs (xvda1): write access will be enabled during recovery
+EXT4-fs (xvda1): recovery complete
EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 202:1.
> What happens if you have 'maxmem' value equal to 'memory' in your guest config?
No difference:
--- verbose_noextraopts 2011-06-14 23:02:24.549323941 +0200
+++ verbose_maxmem 2011-06-14 23:09:47.135304415 +0200
@@ -244,8 +244,8 @@
initcall debugfs_init+0x0/0x5c returned 0 after XX usecs
calling calibrate_xor_blocks+0x0/0xa0 @ 1
xor: automatically using best checksumming function: generic_sse
- generic_sse: 2901.200 MB/sec
-xor: using function: generic_sse (2901.200 MB/sec)
+ generic_sse: 2834.000 MB/sec
+xor: using function: generic_sse (2834.000 MB/sec)
initcall calibrate_xor_blocks+0x0/0xa0 returned 0 after XX usecs
calling random32_init+0x0/0xd8 @ 1
initcall random32_init+0x0/0xd8 returned 0 after XX usecs
@@ -338,12 +338,12 @@
calling raid6_select_algo+0x0/0x1bd @ 1
raid6: int64x1 2032 MB/s
raid6: int64x2 2398 MB/s
-raid6: int64x4 1711 MB/s
+raid6: int64x4 1710 MB/s
raid6: int64x8 1243 MB/s
-raid6: sse2x1 1750 MB/s
-raid6: sse2x2 2362 MB/s
-raid6: sse2x4 1807 MB/s
-raid6: using algorithm sse2x2 (2362 MB/s)
+raid6: sse2x1 1926 MB/s
+raid6: sse2x2 2536 MB/s
+raid6: sse2x4 1539 MB/s
+raid6: using algorithm sse2x2 (2536 MB/s)
initcall raid6_select_algo+0x0/0x1bd returned 0 after XX usecs
calling pci_slot_init+0x0/0x46 @ 1
initcall pci_slot_init+0x0/0x46 returned 0 after XX usecs
@@ -859,9 +859,9 @@
calling init_cryptoloop+0x0/0x2f @ 1
initcall init_cryptoloop+0x0/0x2f returned 0 after XX usecs
calling xlblk_init+0x0/0x81 @ 1
-blkfront: xvda1: flush diskcache: enabled
initcall xlblk_init+0x0/0x81 returned 0 after XX usecs
calling xen_blkif_init+0x0/0x276 @ 1
+blkfront: xvda1: flush diskcache: enabled
initcall xen_blkif_init+0x0/0x276 returned 0 after XX usecs
calling init_sd+0x0/0x112 @ 1
blkfront: xvda2: flush diskcache: enabled
@@ -1478,6 +1478,9 @@
md: autorun ...
md: ... autorun DONE.
EXT3-fs (xvda1): error: couldn't mount because of unsupported optional features (240)
-EXT2-fs (xvda1): error: couldn't mount because of unsupported optional features (240)
+EXT2-fs (xvda1): error: couldn't mount because of unsupported optional features (244)
+EXT4-fs (xvda1): INFO: recovery required on readonly filesystem
+EXT4-fs (xvda1): write access will be enabled during recovery
+EXT4-fs (xvda1): recovery complete
EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 202:1.
And just the noextraopts base log:
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.0.0-rc2 (ranma@nukunuku) (gcc version 4.5.2 (Debian 4.5.2-11) ) #53 SMP Tue Jun 14 15:33:45 CEST 2011
Command line: root=/dev/xvda1 memblock=debug debug loglevel=8 initcall_debug ro ip=192.168.12.1:127.0.255.255:192.168.12.2:255.255.255.0:yumi.uguu.de:eth0:off 4
ACPI in unprivileged domain disabled
released 0 pages of unused memory
Set 0 page(s) to 1-1 mapping.
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 00000000000a0000 (usable)
Xen: 00000000000a0000 - 0000000000100000 (reserved)
Xen: 0000000000100000 - 0000000010000000 (usable)
Xen: 0000000100000000 - 0000000100800000 (usable)
NX (Execute Disable) protection: active
MPS support code is not built-in.
Using acpi=off or acpi=noirq or pci=noacpi may have problem
DMI not present or invalid.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x100800 max_arch_pfn = 0x400000000
last_pfn = 0x10000 max_arch_pfn = 0x400000000
memblock_x86_reserve_range: [0x01ce8000-0x01cf8fff] BRK
MEMBLOCK configuration:
memory size = 0x10790000
memory.cnt = 0x3
memory[0x0] [0x00000000010000-0x0000000009ffff], 0x90000 bytes
memory[0x1] [0x00000000100000-0x0000000fffffff], 0xff00000 bytes
memory[0x2] [0x00000100000000-0x000001007fffff], 0x800000 bytes
reserved.cnt = 0x3
reserved[0x0] [0x00000001000000-0x00000001cf8fff], 0xcf9000 bytes
reserved[0x1] [0x00000001e1e000-0x00000001eb3fff], 0x96000 bytes
reserved[0x2] [0x00000100000000-0x000001007fffff], 0x800000 bytes
initial memory mapped : 0 - 01e1e000
memblock_x86_reserve_range: [0x0009e000-0x0009ffff] TRAMPOLINE
Base memory trampoline at [ffff88000009e000] 9e000 size 8192
init_memory_mapping: 0000000000000000-0000000010000000
0000000000 - 0010000000 page 4k
kernel direct mapping tables up to 10000000 @ ff7e000-10000000
memblock_x86_reserve_range: [0x0ff7e000-0x0ffe9fff] PGTABLE
xen: setting RW the range ffea000 - 10000000
init_memory_mapping: 0000000100000000-0000000100800000
0100000000 - 0100800000 page 4k
kernel direct mapping tables up to 100800000 @ f774000-ff7e000
memblock_x86_reserve_range: [0x0f774000-0x0f778fff] PGTABLE
xen: setting RW the range f779000 - ff7e000
memblock_x86_reserve_range: [0x0ffff000-0x0fffffff] BOOTMEM
memblock_x86_reserve_range: [0x0fb7e000-0x0ff7dfff] BOOTMEM
memblock_x86_reserve_range: [0x0fffef80-0x0fffefc7] BOOTMEM
memblock_x86_reserve_range: [0x0f77e000-0x0fb7dfff] BOOTMEM
memblock_x86_reserve_range: [0x0f000000-0x0f5fffff] BOOTMEM
memblock_x86_reserve_range: [0x0fffd000-0x0fffdfff] BOOTMEM
memblock_x86_reserve_range: [0x0fffc000-0x0fffcfff] BOOTMEM
memblock_x86_reserve_range: [0x0fffb000-0x0fffbfff] BOOTMEM
memblock_x86_reserve_range: [0x0fffa000-0x0fffafff] BOOTMEM
memblock_x86_reserve_range: [0x0fff9000-0x0fff9fff] BOOTMEM
memblock_x86_free_range: [0x0f540000-0x0f5fffff]
memblock_x86_free_range: [0x0f77e000-0x0fb7dfff]
memblock_x86_free_range: [0x0fb7e000-0x0ff7dfff]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100800
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x000000a0
0: 0x00000100 -> 0x00010000
0: 0x00100000 -> 0x00100800
On node 0 totalpages: 67472
DMA zone: 56 pages used for memmap
DMA zone: 2 pages reserved
DMA zone: 3926 pages, LIFO batch:0
memblock_x86_reserve_range: [0x0fffee00-0x0fffef7f] BOOTMEM
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 47160 pages, LIFO batch:15
memblock_x86_reserve_range: [0x0ff66000-0x0ff7dfff] BOOTMEM
Normal zone: 28 pages used for memmap
Normal zone: 2020 pages, LIFO batch:0
memblock_x86_reserve_range: [0x0fffed40-0x0fffedff] BOOTMEM
memblock_x86_reserve_range: [0x0fff8000-0x0fff8fff] BOOTMEM
memblock_x86_reserve_range: [0x0fff7000-0x0fff7fff] BOOTMEM
memblock_x86_reserve_range: [0x0fff6000-0x0fff6fff] BOOTMEM
SMP: Allowing 1 CPUs, 0 hotplug CPUs
No local APIC present
APIC: disable apic facility
APIC: switched to apic NOOP
nr_irqs_gsi: 16
memblock_x86_reserve_range: [0x0fffec00-0x0fffed17] BOOTMEM
memblock_x86_reserve_range: [0x0fffeb80-0x0fffebe7] BOOTMEM
memblock_x86_reserve_range: [0x0fffeb00-0x0fffeb67] BOOTMEM
memblock_x86_reserve_range: [0x0fffea80-0x0fffeae7] BOOTMEM
memblock_x86_reserve_range: [0x0fffea00-0x0fffea67] BOOTMEM
Allocating PCI resources starting at 10000000 (gap: 10000000:f0000000)
Booting paravirtualized kernel on Xen
Xen version: 4.1.0 (preserve-AD)
memblock_x86_reserve_range: [0x0fffe940-0x0fffe9d2] BOOTMEM
memblock_x86_reserve_range: [0x0fffe880-0x0fffe912] BOOTMEM
setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:1 nr_node_ids:1
memblock_x86_reserve_range: [0x0fff5000-0x0fff5fff] BOOTMEM
memblock_x86_reserve_range: [0x0fff4000-0x0fff4fff] BOOTMEM
memblock_x86_reserve_range: [0x0ff4b000-0x0ff65fff] BOOTMEM
PERCPU: Embedded 27 pages/cpu @ffff88000ff4b000 s79488 r8192 d22912 u110592
memblock_x86_reserve_range: [0x0fffe840-0x0fffe847] BOOTMEM
memblock_x86_reserve_range: [0x0fffe800-0x0fffe807] BOOTMEM
memblock_x86_reserve_range: [0x0fffe7c0-0x0fffe7c3] BOOTMEM
memblock_x86_reserve_range: [0x0fffe780-0x0fffe787] BOOTMEM
pcpu-alloc: s79488 r8192 d22912 u110592 alloc=27*4096
pcpu-alloc: [0] 0
memblock_x86_reserve_range: [0x0fffe680-0x0fffe77f] BOOTMEM
memblock_x86_reserve_range: [0x0fffe600-0x0fffe647] BOOTMEM
memblock_x86_reserve_range: [0x0fffe580-0x0fffe5c7] BOOTMEM
memblock_x86_free_range: [0x0fff5000-0x0fff5fff]
memblock_x86_free_range: [0x0fff4000-0x0fff4fff]
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 53106
Kernel command line: root=/dev/xvda1 memblock=debug debug loglevel=8 initcall_debug ro ip=192.168.12.1:127.0.255.255:192.168.12.2:255.255.255.0:yumi.uguu.de:eth0:off 4
memblock_x86_reserve_range: [0x0fff4000-0x0fff5fff] BOOTMEM
PID hash table entries: 1024 (order: 1, 8192 bytes)
memblock_x86_reserve_range: [0x0ff0b000-0x0ff4afff] BOOTMEM
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
memblock_x86_reserve_range: [0x0feeb000-0x0ff0afff] BOOTMEM
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
memblock_x86_reserve_range: [0x0b000000-0x0effffff] BOOTMEM
memblock_x86_reserve_range: [0x0fecb000-0x0feeafff] BOOTMEM
memblock_x86_reserve_range: [0x0fe8b000-0x0fecafff] BOOTMEM
memblock_x86_reserve_range: [0x0ffec000-0x0fff3fff] BOOTMEM
Checking aperture...
No AGP bridge found
Subtract (23 early reservations)
[000009e000-000009ffff]
[0001000000-0001cf8fff]
[0001e1e000-0001eb3fff]
[000b000000-000f53ffff]
[000f774000-000f778fff]
[000fe8b000-000ffe9fff]
[000ffec000-000fffdfff]
[000fffe580-000fffe5c7]
[000fffe600-000fffe647]
[000fffe680-000fffe787]
[000fffe7c0-000fffe7c3]
[000fffe800-000fffe807]
[000fffe840-000fffe847]
[000fffe880-000fffe912]
[000fffe940-000fffe9d2]
[000fffea00-000fffea67]
[000fffea80-000fffeae7]
[000fffeb00-000fffeb67]
[000fffeb80-000fffebe7]
[000fffec00-000fffed17]
[000fffed40-000fffefc7]
[000ffff000-000fffffff]
[0100000000-01007fffff]
Memory: 175388k/4202496k available (6122k kernel code, 3932608k absent, 94500k reserved, 4761k data, 576k init)
Hierarchical RCU implementation.
NR_IRQS:320
Console: colour dummy device 80x25
console [tty0] enabled
console [hvc0] enabled
allocated 3145728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
Detected 2199.838 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.67 BogoMIPS (lpj=21998380)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
tseg: 007ff00000
SMP alternatives: switching to UP code
Freeing SMP alternatives: 28k freed
calling trace_init_flags_sys_exit+0x0/0x12 @ 1
initcall trace_init_flags_sys_exit+0x0/0x12 returned 0 after XX usecs
calling trace_init_flags_sys_enter+0x0/0x12 @ 1
initcall trace_init_flags_sys_enter+0x0/0x12 returned 0 after XX usecs
calling init_hw_perf_events+0x0/0xf1a @ 1
Performance Events:
no APIC, boot with the "lapic" boot parameter to force-enable it.
no hardware sampling interrupt available.
Broken PMU hardware detected, using software events only.
initcall init_hw_perf_events+0x0/0xf1a returned 0 after XX usecs
calling register_trigger_all_cpu_backtrace+0x0/0x14 @ 1
initcall register_trigger_all_cpu_backtrace+0x0/0x14 returned 0 after XX usecs
calling migration_init+0x0/0x70 @ 1
initcall migration_init+0x0/0x70 returned 0 after XX usecs
calling spawn_ksoftirqd+0x0/0x55 @ 1
initcall spawn_ksoftirqd+0x0/0x55 returned 0 after XX usecs
calling init_workqueues+0x0/0x2ff @ 1
initcall init_workqueues+0x0/0x2ff returned 0 after XX usecs
calling init_call_single_data+0x0/0x8c @ 1
initcall init_call_single_data+0x0/0x8c returned 0 after XX usecs
calling cpu_stop_init+0x0/0xaa @ 1
initcall cpu_stop_init+0x0/0xaa returned 0 after XX usecs
calling rcu_spawn_kthreads+0x0/0xc9 @ 1
initcall rcu_spawn_kthreads+0x0/0xc9 returned 0 after XX usecs
calling relay_init+0x0/0x14 @ 1
initcall relay_init+0x0/0x14 returned 0 after XX usecs
calling tracer_alloc_buffers+0x0/0x168 @ 1
initcall tracer_alloc_buffers+0x0/0x168 returned 0 after XX usecs
calling init_trace_printk+0x0/0x12 @ 1
initcall init_trace_printk+0x0/0x12 returned 0 after XX usecs
NMI watchdog disabled (cpu0): hardware events not enabled
Brought up 1 CPUs
devtmpfs: initialized
calling init_mmap_min_addr+0x0/0x16 @ 1
initcall init_mmap_min_addr+0x0/0x16 returned 0 after XX usecs
calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1
initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after XX usecs
calling net_ns_init+0x0/0x154 @ 1
initcall net_ns_init+0x0/0x154 returned 0 after XX usecs
calling cpufreq_tsc+0x0/0x30 @ 1
initcall cpufreq_tsc+0x0/0x30 returned 0 after XX usecs
calling pci_reboot_init+0x0/0x14 @ 1
initcall pci_reboot_init+0x0/0x14 returned 0 after XX usecs
calling init_lapic_sysfs+0x0/0x20 @ 1
initcall init_lapic_sysfs+0x0/0x20 returned 0 after XX usecs
calling init_smp_flush+0x0/0x2d @ 1
initcall init_smp_flush+0x0/0x2d returned 0 after XX usecs
calling alloc_frozen_cpus+0x0/0x8 @ 1
initcall alloc_frozen_cpus+0x0/0x8 returned 0 after XX usecs
calling sysctl_init+0x0/0x16 @ 1
initcall sysctl_init+0x0/0x16 returned 0 after XX usecs
calling ksysfs_init+0x0/0x94 @ 1
initcall ksysfs_init+0x0/0x94 returned 0 after XX usecs
calling init_jiffies_clocksource+0x0/0x12 @ 1
initcall init_jiffies_clocksource+0x0/0x12 returned 0 after XX usecs
calling pm_init+0x0/0x63 @ 1
initcall pm_init+0x0/0x63 returned 0 after XX usecs
calling init_zero_pfn+0x0/0x35 @ 1
initcall init_zero_pfn+0x0/0x35 returned 0 after XX usecs
calling fsnotify_init+0x0/0x26 @ 1
initcall fsnotify_init+0x0/0x26 returned 0 after XX usecs
calling filelock_init+0x0/0x2e @ 1
initcall filelock_init+0x0/0x2e returned 0 after XX usecs
calling init_misc_binfmt+0x0/0x44 @ 1
initcall init_misc_binfmt+0x0/0x44 returned 0 after XX usecs
calling init_script_binfmt+0x0/0x14 @ 1
initcall init_script_binfmt+0x0/0x14 returned 0 after XX usecs
calling init_elf_binfmt+0x0/0x14 @ 1
initcall init_elf_binfmt+0x0/0x14 returned 0 after XX usecs
calling init_compat_elf_binfmt+0x0/0x14 @ 1
initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after XX usecs
calling debugfs_init+0x0/0x5c @ 1
initcall debugfs_init+0x0/0x5c returned 0 after XX usecs
calling calibrate_xor_blocks+0x0/0xa0 @ 1
xor: automatically using best checksumming function: generic_sse
generic_sse: 2901.200 MB/sec
xor: using function: generic_sse (2901.200 MB/sec)
initcall calibrate_xor_blocks+0x0/0xa0 returned 0 after XX usecs
calling random32_init+0x0/0xd8 @ 1
initcall random32_init+0x0/0xd8 returned 0 after XX usecs
calling __gnttab_init+0x0/0x21 @ 1
Grant table initialized
initcall __gnttab_init+0x0/0x21 returned 0 after XX usecs
calling cpufreq_core_init+0x0/0xad @ 1
initcall cpufreq_core_init+0x0/0xad returned 0 after XX usecs
calling cpuidle_init+0x0/0x40 @ 1
initcall cpuidle_init+0x0/0x40 returned 0 after XX usecs
calling sock_init+0x0/0x83 @ 1
initcall sock_init+0x0/0x83 returned 0 after XX usecs
calling netpoll_init+0x0/0x31 @ 1
initcall netpoll_init+0x0/0x31 returned 0 after XX usecs
calling netlink_proto_init+0x0/0x1ad @ 1
NET: Registered protocol family 16
initcall netlink_proto_init+0x0/0x1ad returned 0 after XX usecs
calling bdi_class_init+0x0/0x49 @ 1
initcall bdi_class_init+0x0/0x49 returned 0 after XX usecs
calling kobject_uevent_init+0x0/0x21 @ 1
initcall kobject_uevent_init+0x0/0x21 returned 0 after XX usecs
calling pcibus_class_init+0x0/0x19 @ 1
initcall pcibus_class_init+0x0/0x19 returned 0 after XX usecs
calling pci_driver_init+0x0/0x12 @ 1
initcall pci_driver_init+0x0/0x12 returned 0 after XX usecs
calling xenbus_init+0x0/0x371 @ 1
initcall xenbus_init+0x0/0x371 returned 0 after XX usecs
calling tty_class_init+0x0/0x34 @ 1
initcall tty_class_init+0x0/0x34 returned 0 after XX usecs
calling vtconsole_class_init+0x0/0xeb @ 1
initcall vtconsole_class_init+0x0/0xeb returned 0 after XX usecs
calling wakeup_sources_debugfs_init+0x0/0x2b @ 1
initcall wakeup_sources_debugfs_init+0x0/0x2b returned 0 after XX usecs
calling i2c_init+0x0/0x6f @ 1
initcall i2c_init+0x0/0x6f returned 0 after XX usecs
calling amd_postcore_init+0x0/0x150 @ 1
initcall amd_postcore_init+0x0/0x150 returned 0 after XX usecs
calling arch_kdebugfs_init+0x0/0x24 @ 1
initcall arch_kdebugfs_init+0x0/0x24 returned 0 after XX usecs
calling configure_trampolines+0x0/0x29 @ 1
initcall configure_trampolines+0x0/0x29 returned 0 after XX usecs
calling mtrr_if_init+0x0/0x64 @ 1
initcall mtrr_if_init+0x0/0x64 returned -19 after XX usecs
calling ffh_cstate_init+0x0/0x2a @ 1
initcall ffh_cstate_init+0x0/0x2a returned -1 after XX usecs
initcall ffh_cstate_init+0x0/0x2a returned with error code -1
calling acpi_pci_init+0x0/0x61 @ 1
initcall acpi_pci_init+0x0/0x61 returned 0 after XX usecs
calling setup_vcpu_hotplug_event+0x0/0x22 @ 1
initcall setup_vcpu_hotplug_event+0x0/0x22 returned 0 after XX usecs
calling register_xen_pci_notifier+0x0/0x31 @ 1
initcall register_xen_pci_notifier+0x0/0x31 returned 0 after XX usecs
calling dmi_id_init+0x0/0x30e @ 1
initcall dmi_id_init+0x0/0x30e returned -19 after XX usecs
calling pci_arch_init+0x0/0x69 @ 1
PCI: setting up Xen PCI frontend stub
PCI: pci_cache_line_size set to 64 bytes
initcall pci_arch_init+0x0/0x69 returned 0 after XX usecs
calling topology_init+0x0/0x40 @ 1
initcall topology_init+0x0/0x40 returned 0 after XX usecs
calling mtrr_init_finialize+0x0/0x36 @ 1
initcall mtrr_init_finialize+0x0/0x36 returned 0 after XX usecs
calling init_vdso_vars+0x0/0xf8 @ 1
initcall init_vdso_vars+0x0/0xf8 returned 0 after XX usecs
calling sysenter_setup+0x0/0x2c8 @ 1
initcall sysenter_setup+0x0/0x2c8 returned 0 after XX usecs
calling param_sysfs_init+0x0/0x1b4 @ 1
initcall param_sysfs_init+0x0/0x1b4 returned 0 after XX usecs
calling pm_sysrq_init+0x0/0x19 @ 1
initcall pm_sysrq_init+0x0/0x19 returned 0 after XX usecs
calling default_bdi_init+0x0/0xa9 @ 1
initcall default_bdi_init+0x0/0xa9 returned 0 after XX usecs
calling init_bio+0x0/0xe5 @ 1
bio: create slab <bio-0> at 0
initcall init_bio+0x0/0xe5 returned 0 after XX usecs
calling fsnotify_notification_init+0x0/0x8b @ 1
initcall fsnotify_notification_init+0x0/0x8b returned 0 after XX usecs
calling cryptomgr_init+0x0/0x12 @ 1
initcall cryptomgr_init+0x0/0x12 returned 0 after XX usecs
calling blk_settings_init+0x0/0x2a @ 1
initcall blk_settings_init+0x0/0x2a returned 0 after XX usecs
calling blk_ioc_init+0x0/0x2a @ 1
initcall blk_ioc_init+0x0/0x2a returned 0 after XX usecs
calling blk_softirq_init+0x0/0x6e @ 1
initcall blk_softirq_init+0x0/0x6e returned 0 after XX usecs
calling blk_iopoll_setup+0x0/0x6e @ 1
initcall blk_iopoll_setup+0x0/0x6e returned 0 after XX usecs
calling genhd_device_init+0x0/0x7c @ 1
initcall genhd_device_init+0x0/0x7c returned 0 after XX usecs
calling raid6_select_algo+0x0/0x1bd @ 1
raid6: int64x1 2032 MB/s
raid6: int64x2 2398 MB/s
raid6: int64x4 1711 MB/s
raid6: int64x8 1243 MB/s
raid6: sse2x1 1750 MB/s
raid6: sse2x2 2362 MB/s
raid6: sse2x4 1807 MB/s
raid6: using algorithm sse2x2 (2362 MB/s)
initcall raid6_select_algo+0x0/0x1bd returned 0 after XX usecs
calling pci_slot_init+0x0/0x46 @ 1
initcall pci_slot_init+0x0/0x46 returned 0 after XX usecs
calling acpi_init+0x0/0xb6 @ 1
ACPI: Interpreter disabled.
initcall acpi_init+0x0/0xb6 returned -19 after XX usecs
calling dock_init+0x0/0xa5 @ 1
initcall dock_init+0x0/0xa5 returned 0 after XX usecs
calling acpi_pci_root_init+0x0/0x28 @ 1
initcall acpi_pci_root_init+0x0/0x28 returned 0 after XX usecs
calling acpi_pci_link_init+0x0/0x3e @ 1
initcall acpi_pci_link_init+0x0/0x3e returned 0 after XX usecs
calling pnp_init+0x0/0x12 @ 1
initcall pnp_init+0x0/0x12 returned 0 after XX usecs
calling xen_setup_shutdown_event+0x0/0x22 @ 1
initcall xen_setup_shutdown_event+0x0/0x22 returned 0 after XX usecs
calling balloon_init+0x0/0x130 @ 1
xen/balloon: Initialising balloon driver.
last_pfn = 0x100800 max_arch_pfn = 0x400000000
initcall balloon_init+0x0/0x130 returned 0 after XX usecs
calling xenbus_probe_backend_init+0x0/0x2d @ 1
initcall xenbus_probe_backend_init+0x0/0x2d returned 0 after XX usecs
calling xenbus_probe_frontend_init+0x0/0x2d @ 1
initcall xenbus_probe_frontend_init+0x0/0x2d returned 0 after XX usecs
calling balloon_init+0x0/0x100 @ 1
xen-balloon: Initialising balloon driver.
initcall balloon_init+0x0/0x100 returned 0 after XX usecs
calling misc_init+0x0/0xb7 @ 1
initcall misc_init+0x0/0xb7 returned 0 after XX usecs
calling vga_arb_device_init+0x0/0xe4 @ 1
vgaarb: loaded
initcall vga_arb_device_init+0x0/0xe4 returned 0 after XX usecs
calling init_scsi+0x0/0x7c @ 1
SCSI subsystem initialized
initcall init_scsi+0x0/0x7c returned 0 after XX usecs
calling ata_init+0x0/0x349 @ 1
libata version 3.00 loaded.
initcall ata_init+0x0/0x349 returned 0 after XX usecs
calling usb_init+0x0/0x15f @ 1
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall usb_init+0x0/0x15f returned 0 after XX usecs
calling serio_init+0x0/0x31 @ 1
initcall serio_init+0x0/0x31 returned 0 after XX usecs
calling input_init+0x0/0x10c @ 1
initcall input_init+0x0/0x10c returned 0 after XX usecs
calling rtc_init+0x0/0x6a @ 1
initcall rtc_init+0x0/0x6a returned 0 after XX usecs
calling power_supply_class_init+0x0/0x40 @ 1
initcall power_supply_class_init+0x0/0x40 returned 0 after XX usecs
calling hwmon_init+0x0/0xee @ 1
initcall hwmon_init+0x0/0xee returned 0 after XX usecs
calling md_init+0x0/0x144 @ 1
initcall md_init+0x0/0x144 returned 0 after XX usecs
calling init_soundcore+0x0/0x34 @ 1
initcall init_soundcore+0x0/0x34 returned 0 after XX usecs
calling alsa_sound_init+0x0/0x90 @ 1
Advanced Linux Sound Architecture Driver Version 1.0.24.
initcall alsa_sound_init+0x0/0x90 returned 0 after XX usecs
calling pci_subsys_init+0x0/0x4d @ 1
PCI: System does not support PCI
PCI: System does not support PCI
initcall pci_subsys_init+0x0/0x4d returned 0 after XX usecs
calling proto_init+0x0/0x12 @ 1
initcall proto_init+0x0/0x12 returned 0 after XX usecs
calling net_dev_init+0x0/0x1d9 @ 1
initcall net_dev_init+0x0/0x1d9 returned 0 after XX usecs
calling neigh_init+0x0/0x71 @ 1
initcall neigh_init+0x0/0x71 returned 0 after XX usecs
calling fib_rules_init+0x0/0xa6 @ 1
initcall fib_rules_init+0x0/0xa6 returned 0 after XX usecs
calling pktsched_init+0x0/0xed @ 1
initcall pktsched_init+0x0/0xed returned 0 after XX usecs
calling tc_filter_init+0x0/0x4c @ 1
initcall tc_filter_init+0x0/0x4c returned 0 after XX usecs
calling tc_action_init+0x0/0x4c @ 1
initcall tc_action_init+0x0/0x4c returned 0 after XX usecs
calling genl_init+0x0/0x93 @ 1
initcall genl_init+0x0/0x93 returned 0 after XX usecs
calling sysctl_init+0x0/0x48 @ 1
initcall sysctl_init+0x0/0x48 returned 0 after XX usecs
calling print_ICs+0x0/0x510 @ 1
initcall print_ICs+0x0/0x510 returned 0 after XX usecs
calling hpet_late_init+0x0/0xf4 @ 1
initcall hpet_late_init+0x0/0xf4 returned -19 after XX usecs
calling init_amd_nbs+0x0/0xba @ 1
initcall init_amd_nbs+0x0/0xba returned 0 after XX usecs
calling clocksource_done_booting+0x0/0x5a @ 1
Switching to clocksource xen
initcall clocksource_done_booting+0x0/0x5a returned 0 after XX usecs
calling rb_init_debugfs+0x0/0x2f @ 1
initcall rb_init_debugfs+0x0/0x2f returned 0 after XX usecs
calling tracer_init_debugfs+0x0/0x36b @ 1
initcall tracer_init_debugfs+0x0/0x36b returned 0 after XX usecs
calling init_trace_printk_function_export+0x0/0x2f @ 1
initcall init_trace_printk_function_export+0x0/0x2f returned 0 after XX usecs
calling event_trace_init+0x0/0x2bd @ 1
initcall event_trace_init+0x0/0x2bd returned 0 after XX usecs
calling init_pipe_fs+0x0/0x4c @ 1
initcall init_pipe_fs+0x0/0x4c returned 0 after XX usecs
calling eventpoll_init+0x0/0xda @ 1
initcall eventpoll_init+0x0/0xda returned 0 after XX usecs
calling anon_inode_init+0x0/0x12e @ 1
initcall anon_inode_init+0x0/0x12e returned 0 after XX usecs
calling blk_scsi_ioctl_init+0x0/0x289 @ 1
initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after XX usecs
calling acpi_event_init+0x0/0x52 @ 1
initcall acpi_event_init+0x0/0x52 returned 0 after XX usecs
calling pnp_system_init+0x0/0x12 @ 1
initcall pnp_system_init+0x0/0x12 returned 0 after XX usecs
calling pnpacpi_init+0x0/0x8c @ 1
pnp: PnP ACPI: disabled
initcall pnpacpi_init+0x0/0x8c returned 0 after XX usecs
calling chr_dev_init+0x0/0xc1 @ 1
Switched to NOHz mode on CPU #0
initcall chr_dev_init+0x0/0xc1 returned 0 after XX usecs
calling firmware_class_init+0x0/0x19 @ 1
initcall firmware_class_init+0x0/0x19 returned 0 after XX usecs
calling thermal_init+0x0/0x75 @ 1
initcall thermal_init+0x0/0x75 returned 0 after XX usecs
calling cpufreq_gov_performance_init+0x0/0x12 @ 1
initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after XX usecs
calling init_acpi_pm_clocksource+0x0/0xe0 @ 1
initcall init_acpi_pm_clocksource+0x0/0xe0 returned -19 after XX usecs
calling pcibios_assign_resources+0x0/0x74 @ 1
PCI: max bus depth: 0 pci_try_num: 1
initcall pcibios_assign_resources+0x0/0x74 returned 0 after XX usecs
calling sysctl_core_init+0x0/0x38 @ 1
initcall sysctl_core_init+0x0/0x38 returned 0 after XX usecs
calling inet_init+0x0/0x286 @ 1
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 2, 16384 bytes)
TCP established hash table entries: 8192 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
UDP hash table entries: 128 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
initcall inet_init+0x0/0x286 returned 0 after XX usecs
calling af_unix_init+0x0/0x55 @ 1
NET: Registered protocol family 1
initcall af_unix_init+0x0/0x55 returned 0 after XX usecs
calling init_sunrpc+0x0/0x73 @ 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
initcall init_sunrpc+0x0/0x73 returned 0 after XX usecs
calling pci_apply_final_quirks+0x0/0x106 @ 1
PCI: CLS 0 bytes, default 64
initcall pci_apply_final_quirks+0x0/0x106 returned 0 after XX usecs
calling populate_rootfs+0x0/0x9e @ 1
initcall populate_rootfs+0x0/0x9e returned 0 after XX usecs
calling pci_iommu_init+0x0/0x41 @ 1
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff88000b000000 - ffff88000f000000
software IO TLB at phys 0xb000000 - 0xf000000
initcall pci_iommu_init+0x0/0x41 returned 0 after XX usecs
calling irqfd_module_init+0x0/0x31 @ 1
initcall irqfd_module_init+0x0/0x31 returned 0 after XX usecs
calling svm_init+0x0/0x1e @ 1
has_svm: svm not available
kvm: no hardware support
initcall svm_init+0x0/0x1e returned -95 after XX usecs
initcall svm_init+0x0/0x1e returned with error code -95
calling i8259A_init_ops+0x0/0x21 @ 1
initcall i8259A_init_ops+0x0/0x21 returned 0 after XX usecs
calling vsyscall_init+0x0/0x66 @ 1
initcall vsyscall_init+0x0/0x66 returned 0 after XX usecs
calling sbf_init+0x0/0xe9 @ 1
initcall sbf_init+0x0/0xe9 returned 0 after XX usecs
calling init_tsc_clocksource+0x0/0x5f @ 1
initcall init_tsc_clocksource+0x0/0x5f returned 0 after XX usecs
calling add_rtc_cmos+0x0/0x97 @ 1
platform rtc_cmos: registered platform RTC device (no PNP device found)
initcall add_rtc_cmos+0x0/0x97 returned 0 after XX usecs
calling i8237A_init_ops+0x0/0x14 @ 1
initcall i8237A_init_ops+0x0/0x14 returned 0 after XX usecs
calling cache_sysfs_init+0x0/0x64 @ 1
initcall cache_sysfs_init+0x0/0x64 returned 0 after XX usecs
calling mcheck_init_device+0x0/0x100 @ 1
initcall mcheck_init_device+0x0/0x100 returned -5 after XX usecs
initcall mcheck_init_device+0x0/0x100 returned with error code -5
calling threshold_init_device+0x0/0x4f @ 1
initcall threshold_init_device+0x0/0x4f returned 0 after XX usecs
calling thermal_throttle_init_device+0x0/0x9b @ 1
initcall thermal_throttle_init_device+0x0/0x9b returned 0 after XX usecs
calling ioapic_init_ops+0x0/0x14 @ 1
initcall ioapic_init_ops+0x0/0x14 returned 0 after XX usecs
calling add_pcspkr+0x0/0x3a @ 1
initcall add_pcspkr+0x0/0x3a returned 0 after XX usecs
calling aes_init+0x0/0x12 @ 1
initcall aes_init+0x0/0x12 returned 0 after XX usecs
calling init+0x0/0x12 @ 1
initcall init+0x0/0x12 returned 0 after XX usecs
calling ia32_binfmt_init+0x0/0x14 @ 1
initcall ia32_binfmt_init+0x0/0x14 returned 0 after XX usecs
calling init_sched_debug_procfs+0x0/0x2c @ 1
initcall init_sched_debug_procfs+0x0/0x2c returned 0 after XX usecs
calling proc_schedstat_init+0x0/0x22 @ 1
initcall proc_schedstat_init+0x0/0x22 returned 0 after XX usecs
calling proc_execdomains_init+0x0/0x22 @ 1
initcall proc_execdomains_init+0x0/0x22 returned 0 after XX usecs
calling ioresources_init+0x0/0x3c @ 1
initcall ioresources_init+0x0/0x3c returned 0 after XX usecs
calling uid_cache_init+0x0/0x8d @ 1
initcall uid_cache_init+0x0/0x8d returned 0 after XX usecs
calling init_posix_timers+0x0/0x1cf @ 1
initcall init_posix_timers+0x0/0x1cf returned 0 after XX usecs
calling init_posix_cpu_timers+0x0/0xbf @ 1
initcall init_posix_cpu_timers+0x0/0xbf returned 0 after XX usecs
calling nsproxy_cache_init+0x0/0x2d @ 1
initcall nsproxy_cache_init+0x0/0x2d returned 0 after XX usecs
calling timekeeping_init_ops+0x0/0x14 @ 1
initcall timekeeping_init_ops+0x0/0x14 returned 0 after XX usecs
calling init_clocksource_sysfs+0x0/0x50 @ 1
initcall init_clocksource_sysfs+0x0/0x50 returned 0 after XX usecs
calling init_timer_list_procfs+0x0/0x2c @ 1
initcall init_timer_list_procfs+0x0/0x2c returned 0 after XX usecs
calling alarmtimer_init+0x0/0x147 @ 1
initcall alarmtimer_init+0x0/0x147 returned 0 after XX usecs
calling init_tstats_procfs+0x0/0x2c @ 1
initcall init_tstats_procfs+0x0/0x2c returned 0 after XX usecs
calling futex_init+0x0/0x5d @ 1
initcall futex_init+0x0/0x5d returned 0 after XX usecs
calling proc_dma_init+0x0/0x22 @ 1
initcall proc_dma_init+0x0/0x22 returned 0 after XX usecs
calling proc_modules_init+0x0/0x22 @ 1
initcall proc_modules_init+0x0/0x22 returned 0 after XX usecs
calling kallsyms_init+0x0/0x25 @ 1
initcall kallsyms_init+0x0/0x25 returned 0 after XX usecs
calling ikconfig_init+0x0/0x3a @ 1
initcall ikconfig_init+0x0/0x3a returned 0 after XX usecs
calling hung_task_init+0x0/0x56 @ 1
initcall hung_task_init+0x0/0x56 returned 0 after XX usecs
calling utsname_sysctl_init+0x0/0x14 @ 1
initcall utsname_sysctl_init+0x0/0x14 returned 0 after XX usecs
calling init_tracepoints+0x0/0x12 @ 1
initcall init_tracepoints+0x0/0x12 returned 0 after XX usecs
calling init_lstats_procfs+0x0/0x25 @ 1
initcall init_lstats_procfs+0x0/0x25 returned 0 after XX usecs
calling init_events+0x0/0x61 @ 1
initcall init_events+0x0/0x61 returned 0 after XX usecs
calling init_mmio_trace+0x0/0x12 @ 1
initcall init_mmio_trace+0x0/0x12 returned 0 after XX usecs
calling init_blk_tracer+0x0/0x55 @ 1
initcall init_blk_tracer+0x0/0x55 returned 0 after XX usecs
calling perf_event_sysfs_init+0x0/0x93 @ 1
initcall perf_event_sysfs_init+0x0/0x93 returned 0 after XX usecs
calling init_per_zone_wmark_min+0x0/0x88 @ 1
initcall init_per_zone_wmark_min+0x0/0x88 returned 0 after XX usecs
calling kswapd_init+0x0/0x20 @ 1
initcall kswapd_init+0x0/0x20 returned 0 after XX usecs
calling extfrag_debug_init+0x0/0x7b @ 1
initcall extfrag_debug_init+0x0/0x7b returned 0 after XX usecs
calling setup_vmstat+0x0/0xc0 @ 1
initcall setup_vmstat+0x0/0xc0 returned 0 after XX usecs
calling mm_sysfs_init+0x0/0x29 @ 1
initcall mm_sysfs_init+0x0/0x29 returned 0 after XX usecs
calling proc_vmalloc_init+0x0/0x25 @ 1
initcall proc_vmalloc_init+0x0/0x25 returned 0 after XX usecs
calling procswaps_init+0x0/0x22 @ 1
initcall procswaps_init+0x0/0x22 returned 0 after XX usecs
calling hugetlb_init+0x0/0x3db @ 1
HugeTLB registered 2 MB page size, pre-allocated 0 pages
initcall hugetlb_init+0x0/0x3db returned 0 after XX usecs
calling slab_proc_init+0x0/0x25 @ 1
initcall slab_proc_init+0x0/0x25 returned 0 after XX usecs
calling cpucache_init+0x0/0x40 @ 1
initcall cpucache_init+0x0/0x40 returned 0 after XX usecs
calling hugepage_init+0x0/0x12a @ 1
initcall hugepage_init+0x0/0x12a returned -22 after XX usecs
initcall hugepage_init+0x0/0x12a returned with error code -22
calling init_cleancache+0x0/0x1b @ 1
initcall init_cleancache+0x0/0x1b returned 0 after XX usecs
calling fcntl_init+0x0/0x2a @ 1
initcall fcntl_init+0x0/0x2a returned 0 after XX usecs
calling proc_filesystems_init+0x0/0x22 @ 1
initcall proc_filesystems_init+0x0/0x22 returned 0 after XX usecs
calling fsnotify_mark_init+0x0/0x40 @ 1
initcall fsnotify_mark_init+0x0/0x40 returned 0 after XX usecs
calling dnotify_init+0x0/0x7b @ 1
initcall dnotify_init+0x0/0x7b returned 0 after XX usecs
calling inotify_user_setup+0x0/0x70 @ 1
initcall inotify_user_setup+0x0/0x70 returned 0 after XX usecs
calling aio_setup+0x0/0x78 @ 1
initcall aio_setup+0x0/0x78 returned 0 after XX usecs
calling proc_locks_init+0x0/0x22 @ 1
initcall proc_locks_init+0x0/0x22 returned 0 after XX usecs
calling init_sys32_ioctl+0x0/0x28 @ 1
initcall init_sys32_ioctl+0x0/0x28 returned 0 after XX usecs
calling init_mbcache+0x0/0x14 @ 1
initcall init_mbcache+0x0/0x14 returned 0 after XX usecs
calling proc_cmdline_init+0x0/0x22 @ 1
initcall proc_cmdline_init+0x0/0x22 returned 0 after XX usecs
calling proc_consoles_init+0x0/0x22 @ 1
initcall proc_consoles_init+0x0/0x22 returned 0 after XX usecs
calling proc_cpuinfo_init+0x0/0x22 @ 1
initcall proc_cpuinfo_init+0x0/0x22 returned 0 after XX usecs
calling proc_devices_init+0x0/0x22 @ 1
initcall proc_devices_init+0x0/0x22 returned 0 after XX usecs
calling proc_interrupts_init+0x0/0x22 @ 1
initcall proc_interrupts_init+0x0/0x22 returned 0 after XX usecs
calling proc_loadavg_init+0x0/0x22 @ 1
initcall proc_loadavg_init+0x0/0x22 returned 0 after XX usecs
calling proc_meminfo_init+0x0/0x22 @ 1
initcall proc_meminfo_init+0x0/0x22 returned 0 after XX usecs
calling proc_stat_init+0x0/0x22 @ 1
initcall proc_stat_init+0x0/0x22 returned 0 after XX usecs
calling proc_uptime_init+0x0/0x22 @ 1
initcall proc_uptime_init+0x0/0x22 returned 0 after XX usecs
calling proc_version_init+0x0/0x22 @ 1
initcall proc_version_init+0x0/0x22 returned 0 after XX usecs
calling proc_softirqs_init+0x0/0x22 @ 1
initcall proc_softirqs_init+0x0/0x22 returned 0 after XX usecs
calling proc_kcore_init+0x0/0xa9 @ 1
initcall proc_kcore_init+0x0/0xa9 returned 0 after XX usecs
calling proc_kmsg_init+0x0/0x25 @ 1
initcall proc_kmsg_init+0x0/0x25 returned 0 after XX usecs
calling proc_page_init+0x0/0x42 @ 1
initcall proc_page_init+0x0/0x42 returned 0 after XX usecs
calling configfs_init+0x0/0xb3 @ 1
initcall configfs_init+0x0/0xb3 returned 0 after XX usecs
calling init_devpts_fs+0x0/0x4c @ 1
initcall init_devpts_fs+0x0/0x4c returned 0 after XX usecs
calling init_ext3_fs+0x0/0x6f @ 1
initcall init_ext3_fs+0x0/0x6f returned 0 after XX usecs
calling init_ext2_fs+0x0/0x6f @ 1
initcall init_ext2_fs+0x0/0x6f returned 0 after XX usecs
calling ext4_init_fs+0x0/0x20c @ 1
initcall ext4_init_fs+0x0/0x20c returned 0 after XX usecs
calling journal_init+0x0/0x97 @ 1
initcall journal_init+0x0/0x97 returned 0 after XX usecs
calling journal_init+0x0/0x104 @ 1
initcall journal_init+0x0/0x104 returned 0 after XX usecs
calling init_squashfs_fs+0x0/0x66 @ 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
initcall init_squashfs_fs+0x0/0x66 returned 0 after XX usecs
calling init_ramfs_fs+0x0/0x12 @ 1
initcall init_ramfs_fs+0x0/0x12 returned 0 after XX usecs
calling init_hugetlbfs_fs+0x0/0x98 @ 1
initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after XX usecs
calling init_fat_fs+0x0/0x4f @ 1
initcall init_fat_fs+0x0/0x4f returned 0 after XX usecs
calling init_vfat_fs+0x0/0x12 @ 1
initcall init_vfat_fs+0x0/0x12 returned 0 after XX usecs
calling init_iso9660_fs+0x0/0x5c @ 1
initcall init_iso9660_fs+0x0/0x5c returned 0 after XX usecs
calling init_nfs_fs+0x0/0x10e @ 1
initcall init_nfs_fs+0x0/0x10e returned 0 after XX usecs
calling init_nfsd+0x0/0xbb @ 1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
initcall init_nfsd+0x0/0xbb returned 0 after XX usecs
calling init_nlm+0x0/0x22 @ 1
initcall init_nlm+0x0/0x22 returned 0 after XX usecs
calling init_nls_cp437+0x0/0x12 @ 1
initcall init_nls_cp437+0x0/0x12 returned 0 after XX usecs
calling init_nls_cp850+0x0/0x12 @ 1
initcall init_nls_cp850+0x0/0x12 returned 0 after XX usecs
calling init_nls_cp932+0x0/0x12 @ 1
initcall init_nls_cp932+0x0/0x12 returned 0 after XX usecs
calling init_nls_euc_jp+0x0/0x48 @ 1
initcall init_nls_euc_jp+0x0/0x48 returned 0 after XX usecs
calling init_nls_iso8859_1+0x0/0x12 @ 1
initcall init_nls_iso8859_1+0x0/0x12 returned 0 after XX usecs
calling init_nls_iso8859_15+0x0/0x12 @ 1
initcall init_nls_iso8859_15+0x0/0x12 returned 0 after XX usecs
calling init_nls_utf8+0x0/0x29 @ 1
initcall init_nls_utf8+0x0/0x29 returned 0 after XX usecs
calling init_ntfs_fs+0x0/0x1d1 @ 1
NTFS driver 2.1.30 [Flags: R/W].
initcall init_ntfs_fs+0x0/0x1d1 returned 0 after XX usecs
calling init_autofs4_fs+0x0/0x26 @ 1
initcall init_autofs4_fs+0x0/0x26 returned 0 after XX usecs
calling fuse_init+0x0/0x141 @ 1
fuse init (API version 7.16)
initcall fuse_init+0x0/0x141 returned 0 after XX usecs
calling init_udf_fs+0x0/0x5c @ 1
initcall init_udf_fs+0x0/0x5c returned 0 after XX usecs
calling init_xfs_fs+0x0/0xa9 @ 1
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
initcall init_xfs_fs+0x0/0xa9 returned 0 after XX usecs
calling ipc_init+0x0/0x23 @ 1
msgmni has been set to 342
initcall ipc_init+0x0/0x23 returned 0 after XX usecs
calling ipc_sysctl_init+0x0/0x14 @ 1
initcall ipc_sysctl_init+0x0/0x14 returned 0 after XX usecs
calling key_proc_init+0x0/0x33 @ 1
initcall key_proc_init+0x0/0x33 returned 0 after XX usecs
calling crypto_wq_init+0x0/0x31 @ 1
initcall crypto_wq_init+0x0/0x31 returned 0 after XX usecs
calling crypto_algapi_init+0x0/0xd @ 1
initcall crypto_algapi_init+0x0/0xd returned 0 after XX usecs
calling skcipher_module_init+0x0/0x36 @ 1
initcall skcipher_module_init+0x0/0x36 returned 0 after XX usecs
calling chainiv_module_init+0x0/0x12 @ 1
initcall chainiv_module_init+0x0/0x12 returned 0 after XX usecs
calling eseqiv_module_init+0x0/0x12 @ 1
initcall eseqiv_module_init+0x0/0x12 returned 0 after XX usecs
calling seqiv_module_init+0x0/0x12 @ 1
initcall seqiv_module_init+0x0/0x12 returned 0 after XX usecs
calling hmac_module_init+0x0/0x12 @ 1
initcall hmac_module_init+0x0/0x12 returned 0 after XX usecs
calling md5_mod_init+0x0/0x12 @ 1
initcall md5_mod_init+0x0/0x12 returned 0 after XX usecs
calling sha1_generic_mod_init+0x0/0x12 @ 1
initcall sha1_generic_mod_init+0x0/0x12 returned 0 after XX usecs
calling sha256_generic_mod_init+0x0/0x3f @ 1
initcall sha256_generic_mod_init+0x0/0x3f returned 0 after XX usecs
calling crypto_cbc_module_init+0x0/0x12 @ 1
initcall crypto_cbc_module_init+0x0/0x12 returned 0 after XX usecs
calling crypto_ctr_module_init+0x0/0x3e @ 1
initcall crypto_ctr_module_init+0x0/0x3e returned 0 after XX usecs
calling cryptd_init+0x0/0xc5 @ 1
initcall cryptd_init+0x0/0xc5 returned 0 after XX usecs
calling des_generic_mod_init+0x0/0x3f @ 1
initcall des_generic_mod_init+0x0/0x3f returned 0 after XX usecs
calling blowfish_mod_init+0x0/0x12 @ 1
initcall blowfish_mod_init+0x0/0x12 returned 0 after XX usecs
calling aes_init+0x0/0x12 @ 1
initcall aes_init+0x0/0x12 returned 0 after XX usecs
calling krng_mod_init+0x0/0x12 @ 1
initcall krng_mod_init+0x0/0x12 returned 0 after XX usecs
calling async_pq_init+0x0/0x44 @ 1
initcall async_pq_init+0x0/0x44 returned 0 after XX usecs
calling proc_genhd_init+0x0/0x3c @ 1
initcall proc_genhd_init+0x0/0x3c returned 0 after XX usecs
calling init_cgroup_blkio+0x0/0x12 @ 1
initcall init_cgroup_blkio+0x0/0x12 returned 0 after XX usecs
calling throtl_init+0x0/0x44 @ 1
initcall throtl_init+0x0/0x44 returned 0 after XX usecs
calling noop_init+0x0/0x14 @ 1
io scheduler noop registered
initcall noop_init+0x0/0x14 returned 0 after XX usecs
calling deadline_init+0x0/0x14 @ 1
io scheduler deadline registered
initcall deadline_init+0x0/0x14 returned 0 after XX usecs
calling cfq_init+0x0/0xb3 @ 1
io scheduler cfq registered (default)
initcall cfq_init+0x0/0xb3 returned 0 after XX usecs
calling init_kmp+0x0/0x12 @ 1
initcall init_kmp+0x0/0x12 returned 0 after XX usecs
calling init_bm+0x0/0x12 @ 1
initcall init_bm+0x0/0x12 returned 0 after XX usecs
calling init_fsm+0x0/0x12 @ 1
initcall init_fsm+0x0/0x12 returned 0 after XX usecs
calling percpu_counter_startup+0x0/0x19 @ 1
initcall percpu_counter_startup+0x0/0x19 returned 0 after XX usecs
calling pci_proc_init+0x0/0x6b @ 1
initcall pci_proc_init+0x0/0x6b returned 0 after XX usecs
calling pcie_portdrv_init+0x0/0x7a @ 1
initcall pcie_portdrv_init+0x0/0x7a returned 0 after XX usecs
calling aer_service_init+0x0/0x22 @ 1
initcall aer_service_init+0x0/0x22 returned 0 after XX usecs
calling pcie_pme_service_init+0x0/0x12 @ 1
initcall pcie_pme_service_init+0x0/0x12 returned 0 after XX usecs
calling ioapic_init+0x0/0x1b @ 1
initcall ioapic_init+0x0/0x1b returned 0 after XX usecs
calling pcifront_init+0x0/0x5c @ 1
initcall pcifront_init+0x0/0x5c returned 0 after XX usecs
calling acpi_reserve_resources+0x0/0xeb @ 1
initcall acpi_reserve_resources+0x0/0xeb returned 0 after XX usecs
calling irqrouter_init_ops+0x0/0x26 @ 1
initcall irqrouter_init_ops+0x0/0x26 returned 0 after XX usecs
calling acpi_button_init+0x0/0x12 @ 1
initcall acpi_button_init+0x0/0x12 returned -19 after XX usecs
calling acpi_fan_init+0x0/0x18 @ 1
initcall acpi_fan_init+0x0/0x18 returned -19 after XX usecs
calling acpi_pci_slot_init+0x0/0x20 @ 1
initcall acpi_pci_slot_init+0x0/0x20 returned 0 after XX usecs
calling acpi_processor_init+0x0/0xcd @ 1
initcall acpi_processor_init+0x0/0xcd returned 0 after XX usecs
calling acpi_container_init+0x0/0x4a @ 1
initcall acpi_container_init+0x0/0x4a returned -19 after XX usecs
calling acpi_thermal_init+0x0/0x42 @ 1
initcall acpi_thermal_init+0x0/0x42 returned -19 after XX usecs
calling xenbus_probe_initcall+0x0/0x3b @ 1
initcall xenbus_probe_initcall+0x0/0x3b returned 0 after XX usecs
calling xen_tmem_init+0x0/0x5c @ 1
initcall xen_tmem_init+0x0/0x5c returned 0 after XX usecs
calling evtchn_init+0x0/0x6e @ 1
Event-channel device installed.
initcall evtchn_init+0x0/0x6e returned 0 after XX usecs
calling xenfs_init+0x0/0x2d @ 1
initcall xenfs_init+0x0/0x2d returned 0 after XX usecs
calling hypervisor_subsys_init+0x0/0x25 @ 1
initcall hypervisor_subsys_init+0x0/0x25 returned 0 after XX usecs
calling hyper_sysfs_init+0x0/0xbf @ 1
initcall hyper_sysfs_init+0x0/0xbf returned 0 after XX usecs
calling pty_init+0x0/0x26a @ 1
initcall pty_init+0x0/0x26a returned 0 after XX usecs
calling sysrq_init+0x0/0x68 @ 1
initcall sysrq_init+0x0/0x68 returned 0 after XX usecs
calling xen_hvc_init+0x0/0x144 @ 1
initcall xen_hvc_init+0x0/0x144 returned 0 after XX usecs
calling serial8250_init+0x0/0x18e @ 1
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
initcall serial8250_init+0x0/0x18e returned 0 after XX usecs
calling serial8250_pnp_init+0x0/0x12 @ 1
initcall serial8250_pnp_init+0x0/0x12 returned 0 after XX usecs
calling serial8250_pci_init+0x0/0x1b @ 1
initcall serial8250_pci_init+0x0/0x1b returned 0 after XX usecs
calling rand_initialize+0x0/0x2c @ 1
initcall rand_initialize+0x0/0x2c returned 0 after XX usecs
calling hpet_init+0x0/0x6a @ 1
initcall hpet_init+0x0/0x6a returned -19 after XX usecs
calling topology_sysfs_init+0x0/0x50 @ 1
initcall topology_sysfs_init+0x0/0x50 returned 0 after XX usecs
calling loop_init+0x0/0x231 @ 1
loop: module loaded
initcall loop_init+0x0/0x231 returned 0 after XX usecs
calling init_cryptoloop+0x0/0x2f @ 1
initcall init_cryptoloop+0x0/0x2f returned 0 after XX usecs
calling xlblk_init+0x0/0x81 @ 1
blkfront: xvda1: flush diskcache: enabled
initcall xlblk_init+0x0/0x81 returned 0 after XX usecs
calling xen_blkif_init+0x0/0x276 @ 1
initcall xen_blkif_init+0x0/0x276 returned 0 after XX usecs
calling init_sd+0x0/0x112 @ 1
blkfront: xvda2: flush diskcache: enabled
initcall init_sd+0x0/0x112 returned 0 after XX usecs
calling init_sr+0x0/0x46 @ 1
initcall init_sr+0x0/0x46 returned 0 after XX usecs
calling init_sg+0x0/0xc7 @ 1
initcall init_sg+0x0/0xc7 returned 0 after XX usecs
calling ahci_init+0x0/0x1b @ 1
initcall ahci_init+0x0/0x1b returned 0 after XX usecs
calling piix_init+0x0/0x29 @ 1
initcall piix_init+0x0/0x29 returned 0 after XX usecs
calling mv_init+0x0/0x45 @ 1
initcall mv_init+0x0/0x45 returned 0 after XX usecs
calling nv_init+0x0/0x1b @ 1
initcall nv_init+0x0/0x1b returned 0 after XX usecs
calling svia_init+0x0/0x1b @ 1
initcall svia_init+0x0/0x1b returned 0 after XX usecs
calling amd_init+0x0/0x1b @ 1
initcall amd_init+0x0/0x1b returned 0 after XX usecs
calling pdc2027x_init+0x0/0x1b @ 1
initcall pdc2027x_init+0x0/0x1b returned 0 after XX usecs
calling sil680_init+0x0/0x1b @ 1
initcall sil680_init+0x0/0x1b returned 0 after XX usecs
calling via_init+0x0/0x1b @ 1
initcall via_init+0x0/0x1b returned 0 after XX usecs
calling e1000_init_module+0x0/0x87 @ 1
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
initcall e1000_init_module+0x0/0x87 returned 0 after XX usecs
calling e1000_init_module+0x0/0x3e @ 1
e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
initcall e1000_init_module+0x0/0x3e returned 0 after XX usecs
calling e100_init_module+0x0/0x5d @ 1
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
initcall e100_init_module+0x0/0x5d returned 0 after XX usecs
calling net_olddevs_init+0x0/0x9e @ 1
initcall net_olddevs_init+0x0/0x9e returned 0 after XX usecs
calling ppp_init+0x0/0xe4 @ 1
PPP generic driver version 2.4.2
initcall ppp_init+0x0/0xe4 returned 0 after XX usecs
calling ppp_async_init+0x0/0x36 @ 1
initcall ppp_async_init+0x0/0x36 returned 0 after XX usecs
calling ppp_sync_init+0x0/0x36 @ 1
initcall ppp_sync_init+0x0/0x36 returned 0 after XX usecs
calling deflate_init+0x0/0x3b @ 1
PPP Deflate Compression module registered
initcall deflate_init+0x0/0x3b returned 0 after XX usecs
calling bsdcomp_init+0x0/0x2f @ 1
PPP BSD Compression module registered
initcall bsdcomp_init+0x0/0x2f returned 0 after XX usecs
calling pppox_init+0x0/0x12 @ 1
NET: Registered protocol family 24
initcall pppox_init+0x0/0x12 returned 0 after XX usecs
calling pppoe_init+0x0/0x87 @ 1
initcall pppoe_init+0x0/0x87 returned 0 after XX usecs
calling netif_init+0x0/0x66 @ 1
Initialising Xen virtual ethernet driver.
initcall netif_init+0x0/0x66 returned 0 after XX usecs
calling netback_init+0x0/0x219 @ 1
initcall netback_init+0x0/0x219 returned 0 after XX usecs
calling dummy_init_module+0x0/0xaa @ 1
initcall dummy_init_module+0x0/0xaa returned 0 after XX usecs
calling ifb_init_module+0x0/0xad @ 1
initcall ifb_init_module+0x0/0xad returned 0 after XX usecs
calling cp_init+0x0/0x1b @ 1
initcall cp_init+0x0/0x1b returned 0 after XX usecs
calling rtl8139_init_module+0x0/0x1b @ 1
initcall rtl8139_init_module+0x0/0x1b returned 0 after XX usecs
calling tun_init+0x0/0x93 @ 1
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
initcall tun_init+0x0/0x93 returned 0 after XX usecs
calling rtl8169_init_module+0x0/0x1b @ 1
initcall rtl8169_init_module+0x0/0x1b returned 0 after XX usecs
calling cdc_init+0x0/0x1b @ 1
usbcore: registered new interface driver cdc_ether
initcall cdc_init+0x0/0x1b returned 0 after XX usecs
calling cdc_subset_init+0x0/0x1b @ 1
usbcore: registered new interface driver cdc_subset
initcall cdc_subset_init+0x0/0x1b returned 0 after XX usecs
calling zaurus_init+0x0/0x1b @ 1
usbcore: registered new interface driver zaurus
initcall zaurus_init+0x0/0x1b returned 0 after XX usecs
calling usbnet_init+0x0/0x2b @ 1
initcall usbnet_init+0x0/0x2b returned 0 after XX usecs
calling cdc_ncm_init+0x0/0x29 @ 1
cdc_ncm: 01-June-2011
usbcore: registered new interface driver cdc_ncm
initcall cdc_ncm_init+0x0/0x29 returned 0 after XX usecs
calling de_init+0x0/0x1b @ 1
initcall de_init+0x0/0x1b returned 0 after XX usecs
calling tulip_init+0x0/0x33 @ 1
initcall tulip_init+0x0/0x33 returned 0 after XX usecs
calling de4x5_module_init+0x0/0x1b @ 1
initcall de4x5_module_init+0x0/0x1b returned 0 after XX usecs
calling init_netconsole+0x0/0x23e @ 1
console [netcon0] enabled
netconsole: network logging started
initcall init_netconsole+0x0/0x23e returned 0 after XX usecs
calling cdrom_init+0x0/0xd @ 1
initcall cdrom_init+0x0/0xd returned 0 after XX usecs
calling mon_init+0x0/0xfc @ 1
initcall mon_init+0x0/0xfc returned 0 after XX usecs
calling ehci_hcd_init+0x0/0x78 @ 1
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
initcall ehci_hcd_init+0x0/0x78 returned 0 after XX usecs
calling ohci_hcd_mod_init+0x0/0x54 @ 1
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
initcall ohci_hcd_mod_init+0x0/0x54 returned 0 after XX usecs
calling uhci_hcd_init+0x0/0xc6 @ 1
uhci_hcd: USB Universal Host Controller Interface driver
initcall uhci_hcd_init+0x0/0xc6 returned 0 after XX usecs
calling acm_init+0x0/0xfd @ 1
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
initcall acm_init+0x0/0xfd returned 0 after XX usecs
calling usblp_init+0x0/0x1b @ 1
usbcore: registered new interface driver usblp
initcall usblp_init+0x0/0x1b returned 0 after XX usecs
calling usb_serial_init+0x0/0x1e5 @ 1
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
initcall usb_serial_init+0x0/0x1e5 returned 0 after XX usecs
calling pl2303_init+0x0/0x58 @ 1
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
initcall pl2303_init+0x0/0x58 returned 0 after XX usecs
calling i8042_init+0x0/0x3a2 @ 1
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: No controller found
initcall i8042_init+0x0/0x3a2 returned -19 after XX usecs
calling serport_init+0x0/0x34 @ 1
initcall serport_init+0x0/0x34 returned 0 after XX usecs
calling mousedev_init+0x0/0x8e @ 1
mousedev: PS/2 mouse device common for all mice
initcall mousedev_init+0x0/0x8e returned 0 after XX usecs
calling joydev_init+0x0/0x12 @ 1
initcall joydev_init+0x0/0x12 returned 0 after XX usecs
calling evdev_init+0x0/0x12 @ 1
initcall evdev_init+0x0/0x12 returned 0 after XX usecs
calling atkbd_init+0x0/0x27 @ 1
initcall atkbd_init+0x0/0x27 returned 0 after XX usecs
calling cmos_init+0x0/0x6a @ 1
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc_cmos: probe of rtc_cmos failed with error -38
initcall cmos_init+0x0/0x6a returned -19 after XX usecs
calling i2c_dev_init+0x0/0xca @ 1
i2c /dev entries driver
initcall i2c_dev_init+0x0/0xca returned 0 after XX usecs
calling i2c_piix4_init+0x0/0x1b @ 1
initcall i2c_piix4_init+0x0/0x1b returned 0 after XX usecs
calling sm_it87_init+0x0/0x3f5 @ 1
initcall sm_it87_init+0x0/0x3f5 returned -19 after XX usecs
calling k8temp_init+0x0/0x1b @ 1
initcall k8temp_init+0x0/0x1b returned 0 after XX usecs
calling sm_vt8231_init+0x0/0x1b @ 1
initcall sm_vt8231_init+0x0/0x1b returned 0 after XX usecs
calling raid_init+0x0/0x12 @ 1
md: raid1 personality registered for level 1
initcall raid_init+0x0/0x12 returned 0 after XX usecs
calling raid5_init+0x0/0x2c @ 1
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
initcall raid5_init+0x0/0x2c returned 0 after XX usecs
calling dm_init+0x0/0x46 @ 1
device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
initcall dm_init+0x0/0x46 returned 0 after XX usecs
calling dm_crypt_init+0x0/0x69 @ 1
initcall dm_crypt_init+0x0/0x69 returned 0 after XX usecs
calling dm_snapshot_init+0x0/0x205 @ 1
initcall dm_snapshot_init+0x0/0x205 returned 0 after XX usecs
calling dm_mirror_init+0x0/0x79 @ 1
initcall dm_mirror_init+0x0/0x79 returned 0 after XX usecs
calling dm_dirty_log_init+0x0/0x59 @ 1
initcall dm_dirty_log_init+0x0/0x59 returned 0 after XX usecs
calling cpufreq_stats_init+0x0/0x9d @ 1
initcall cpufreq_stats_init+0x0/0x9d returned 0 after XX usecs
calling cpufreq_gov_dbs_init+0x0/0x5e @ 1
initcall cpufreq_gov_dbs_init+0x0/0x5e returned 0 after XX usecs
calling init_ladder+0x0/0x12 @ 1
cpuidle: using governor ladder
initcall init_ladder+0x0/0x12 returned 0 after XX usecs
calling init_menu+0x0/0x12 @ 1
cpuidle: using governor menu
initcall init_menu+0x0/0x12 returned 0 after XX usecs
calling hid_init+0x0/0x4d @ 1
initcall hid_init+0x0/0x4d returned 0 after XX usecs
calling a4_init+0x0/0x1b @ 1
initcall a4_init+0x0/0x1b returned 0 after XX usecs
calling apple_init+0x0/0x38 @ 1
initcall apple_init+0x0/0x38 returned 0 after XX usecs
calling belkin_init+0x0/0x1b @ 1
initcall belkin_init+0x0/0x1b returned 0 after XX usecs
calling ch_init+0x0/0x1b @ 1
initcall ch_init+0x0/0x1b returned 0 after XX usecs
calling ch_init+0x0/0x1b @ 1
initcall ch_init+0x0/0x1b returned 0 after XX usecs
calling cp_init+0x0/0x1b @ 1
initcall cp_init+0x0/0x1b returned 0 after XX usecs
calling dr_init+0x0/0x1b @ 1
initcall dr_init+0x0/0x1b returned 0 after XX usecs
calling ez_init+0x0/0x1b @ 1
initcall ez_init+0x0/0x1b returned 0 after XX usecs
calling gyration_init+0x0/0x1b @ 1
initcall gyration_init+0x0/0x1b returned 0 after XX usecs
calling ks_init+0x0/0x1b @ 1
initcall ks_init+0x0/0x1b returned 0 after XX usecs
calling kye_init+0x0/0x1b @ 1
initcall kye_init+0x0/0x1b returned 0 after XX usecs
calling lg_init+0x0/0x1b @ 1
initcall lg_init+0x0/0x1b returned 0 after XX usecs
calling ms_init+0x0/0x1b @ 1
initcall ms_init+0x0/0x1b returned 0 after XX usecs
calling mr_init+0x0/0x1b @ 1
initcall mr_init+0x0/0x1b returned 0 after XX usecs
calling ntrig_init+0x0/0x1b @ 1
initcall ntrig_init+0x0/0x1b returned 0 after XX usecs
calling ortek_init+0x0/0x1b @ 1
initcall ortek_init+0x0/0x1b returned 0 after XX usecs
calling pl_init+0x0/0x1b @ 1
initcall pl_init+0x0/0x1b returned 0 after XX usecs
calling pl_init+0x0/0x1b @ 1
initcall pl_init+0x0/0x1b returned 0 after XX usecs
calling samsung_init+0x0/0x1b @ 1
initcall samsung_init+0x0/0x1b returned 0 after XX usecs
calling sjoy_init+0x0/0x1b @ 1
initcall sjoy_init+0x0/0x1b returned 0 after XX usecs
calling sony_init+0x0/0x1b @ 1
initcall sony_init+0x0/0x1b returned 0 after XX usecs
calling sp_init+0x0/0x1b @ 1
initcall sp_init+0x0/0x1b returned 0 after XX usecs
calling ga_init+0x0/0x1b @ 1
initcall ga_init+0x0/0x1b returned 0 after XX usecs
calling tm_init+0x0/0x1b @ 1
initcall tm_init+0x0/0x1b returned 0 after XX usecs
calling ts_init+0x0/0x1b @ 1
initcall ts_init+0x0/0x1b returned 0 after XX usecs
calling twinhan_init+0x0/0x1b @ 1
initcall twinhan_init+0x0/0x1b returned 0 after XX usecs
calling zp_init+0x0/0x1b @ 1
initcall zp_init+0x0/0x1b returned 0 after XX usecs
calling hid_init+0x0/0x79 @ 1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
initcall hid_init+0x0/0x79 returned 0 after XX usecs
calling staging_init+0x0/0x8 @ 1
initcall staging_init+0x0/0x8 returned 0 after XX usecs
calling alsa_hwdep_init+0x0/0x64 @ 1
initcall alsa_hwdep_init+0x0/0x64 returned 0 after XX usecs
calling alsa_timer_init+0x0/0x146 @ 1
initcall alsa_timer_init+0x0/0x146 returned 0 after XX usecs
calling alsa_pcm_init+0x0/0x6c @ 1
initcall alsa_pcm_init+0x0/0x6c returned 0 after XX usecs
calling snd_mem_init+0x0/0x2c @ 1
initcall snd_mem_init+0x0/0x2c returned 0 after XX usecs
calling patch_realtek_init+0x0/0x12 @ 1
initcall patch_realtek_init+0x0/0x12 returned 0 after XX usecs
calling patch_cmedia_init+0x0/0x12 @ 1
initcall patch_cmedia_init+0x0/0x12 returned 0 after XX usecs
calling patch_analog_init+0x0/0x12 @ 1
initcall patch_analog_init+0x0/0x12 returned 0 after XX usecs
calling patch_sigmatel_init+0x0/0x12 @ 1
initcall patch_sigmatel_init+0x0/0x12 returned 0 after XX usecs
calling patch_si3054_init+0x0/0x12 @ 1
initcall patch_si3054_init+0x0/0x12 returned 0 after XX usecs
calling patch_cirrus_init+0x0/0x12 @ 1
initcall patch_cirrus_init+0x0/0x12 returned 0 after XX usecs
calling patch_ca0110_init+0x0/0x12 @ 1
initcall patch_ca0110_init+0x0/0x12 returned 0 after XX usecs
calling patch_conexant_init+0x0/0x12 @ 1
initcall patch_conexant_init+0x0/0x12 returned 0 after XX usecs
calling patch_via_init+0x0/0x12 @ 1
initcall patch_via_init+0x0/0x12 returned 0 after XX usecs
calling patch_hdmi_init+0x0/0x12 @ 1
initcall patch_hdmi_init+0x0/0x12 returned 0 after XX usecs
calling alsa_card_azx_init+0x0/0x1b @ 1
initcall alsa_card_azx_init+0x0/0x1b returned 0 after XX usecs
calling alsa_sound_last_init+0x0/0x6f @ 1
ALSA device list:
No soundcards found.
initcall alsa_sound_last_init+0x0/0x6f returned 0 after XX usecs
calling llc_init+0x0/0x20 @ 1
initcall llc_init+0x0/0x20 returned 0 after XX usecs
calling snap_init+0x0/0x39 @ 1
initcall snap_init+0x0/0x39 returned 0 after XX usecs
calling blackhole_module_init+0x0/0x12 @ 1
initcall blackhole_module_init+0x0/0x12 returned 0 after XX usecs
calling police_init_module+0x0/0x12 @ 1
initcall police_init_module+0x0/0x12 returned 0 after XX usecs
calling cbq_module_init+0x0/0x12 @ 1
initcall cbq_module_init+0x0/0x12 returned 0 after XX usecs
calling htb_module_init+0x0/0x12 @ 1
initcall htb_module_init+0x0/0x12 returned 0 after XX usecs
calling red_module_init+0x0/0x12 @ 1
initcall red_module_init+0x0/0x12 returned 0 after XX usecs
calling gred_module_init+0x0/0x12 @ 1
initcall gred_module_init+0x0/0x12 returned 0 after XX usecs
calling ingress_module_init+0x0/0x12 @ 1
initcall ingress_module_init+0x0/0x12 returned 0 after XX usecs
calling dsmark_module_init+0x0/0x12 @ 1
initcall dsmark_module_init+0x0/0x12 returned 0 after XX usecs
calling sfb_module_init+0x0/0x12 @ 1
initcall sfb_module_init+0x0/0x12 returned 0 after XX usecs
calling sfq_module_init+0x0/0x12 @ 1
initcall sfq_module_init+0x0/0x12 returned 0 after XX usecs
calling tbf_module_init+0x0/0x12 @ 1
initcall tbf_module_init+0x0/0x12 returned 0 after XX usecs
calling teql_init+0x0/0xf1 @ 1
initcall teql_init+0x0/0xf1 returned 0 after XX usecs
calling prio_module_init+0x0/0x12 @ 1
initcall prio_module_init+0x0/0x12 returned 0 after XX usecs
calling mqprio_module_init+0x0/0x12 @ 1
initcall mqprio_module_init+0x0/0x12 returned 0 after XX usecs
calling choke_module_init+0x0/0x12 @ 1
initcall choke_module_init+0x0/0x12 returned 0 after XX usecs
calling init_u32+0x0/0x2e @ 1
u32 classifier
Actions configured
initcall init_u32+0x0/0x2e returned 0 after XX usecs
calling init_route4+0x0/0x12 @ 1
initcall init_route4+0x0/0x12 returned 0 after XX usecs
calling init_fw+0x0/0x12 @ 1
initcall init_fw+0x0/0x12 returned 0 after XX usecs
calling init_rsvp+0x0/0x12 @ 1
initcall init_rsvp+0x0/0x12 returned 0 after XX usecs
calling init_tcindex+0x0/0x12 @ 1
initcall init_tcindex+0x0/0x12 returned 0 after XX usecs
calling init_rsvp+0x0/0x12 @ 1
initcall init_rsvp+0x0/0x12 returned 0 after XX usecs
calling init_basic+0x0/0x12 @ 1
initcall init_basic+0x0/0x12 returned 0 after XX usecs
calling init_cgroup_cls+0x0/0x3c @ 1
initcall init_cgroup_cls+0x0/0x3c returned 0 after XX usecs
calling nfnetlink_init+0x0/0x27 @ 1
Netfilter messages via NETLINK v0.30.
initcall nfnetlink_init+0x0/0x27 returned 0 after XX usecs
calling nfnetlink_queue_init+0x0/0xa4 @ 1
initcall nfnetlink_queue_init+0x0/0xa4 returned 0 after XX usecs
calling nfnetlink_log_init+0x0/0xd7 @ 1
initcall nfnetlink_log_init+0x0/0xd7 returned 0 after XX usecs
calling nf_conntrack_standalone_init+0x0/0x12 @ 1
nf_conntrack version 0.5.0 (1370 buckets, 5480 max)
initcall nf_conntrack_standalone_init+0x0/0x12 returned 0 after XX usecs
calling ctnetlink_init+0x0/0x76 @ 1
ctnetlink v0.93: registering with nfnetlink.
initcall ctnetlink_init+0x0/0x76 returned 0 after XX usecs
calling nf_conntrack_ftp_init+0x0/0x1a4 @ 1
initcall nf_conntrack_ftp_init+0x0/0x1a4 returned 0 after XX usecs
calling nf_conntrack_h323_init+0x0/0xd4 @ 1
initcall nf_conntrack_h323_init+0x0/0xd4 returned 0 after XX usecs
calling nf_conntrack_irc_init+0x0/0x181 @ 1
initcall nf_conntrack_irc_init+0x0/0x181 returned 0 after XX usecs
calling nf_conntrack_sip_init+0x0/0x1ca @ 1
initcall nf_conntrack_sip_init+0x0/0x1ca returned 0 after XX usecs
calling xt_init+0x0/0x117 @ 1
initcall xt_init+0x0/0x117 returned 0 after XX usecs
calling tcpudp_mt_init+0x0/0x17 @ 1
initcall tcpudp_mt_init+0x0/0x17 returned 0 after XX usecs
calling mark_mt_init+0x0/0x40 @ 1
initcall mark_mt_init+0x0/0x40 returned 0 after XX usecs
calling connmark_mt_init+0x0/0x40 @ 1
initcall connmark_mt_init+0x0/0x40 returned 0 after XX usecs
calling classify_tg_init+0x0/0x17 @ 1
initcall classify_tg_init+0x0/0x17 returned 0 after XX usecs
calling dscp_tg_init+0x0/0x17 @ 1
initcall dscp_tg_init+0x0/0x17 returned 0 after XX usecs
calling hl_tg_init+0x0/0x17 @ 1
initcall hl_tg_init+0x0/0x17 returned 0 after XX usecs
calling nflog_tg_init+0x0/0x12 @ 1
initcall nflog_tg_init+0x0/0x12 returned 0 after XX usecs
calling nfqueue_tg_init+0x0/0x17 @ 1
initcall nfqueue_tg_init+0x0/0x17 returned 0 after XX usecs
calling tcpmss_tg_init+0x0/0x17 @ 1
initcall tcpmss_tg_init+0x0/0x17 returned 0 after XX usecs
calling comment_mt_init+0x0/0x12 @ 1
initcall comment_mt_init+0x0/0x12 returned 0 after XX usecs
calling connbytes_mt_init+0x0/0x12 @ 1
initcall connbytes_mt_init+0x0/0x12 returned 0 after XX usecs
calling connlimit_mt_init+0x0/0x17 @ 1
initcall connlimit_mt_init+0x0/0x17 returned 0 after XX usecs
calling conntrack_mt_init+0x0/0x17 @ 1
initcall conntrack_mt_init+0x0/0x17 returned 0 after XX usecs
calling dscp_mt_init+0x0/0x17 @ 1
initcall dscp_mt_init+0x0/0x17 returned 0 after XX usecs
calling hashlimit_mt_init+0x0/0x8c @ 1
initcall hashlimit_mt_init+0x0/0x8c returned 0 after XX usecs
calling helper_mt_init+0x0/0x12 @ 1
initcall helper_mt_init+0x0/0x12 returned 0 after XX usecs
calling hl_mt_init+0x0/0x17 @ 1
initcall hl_mt_init+0x0/0x17 returned 0 after XX usecs
calling length_mt_init+0x0/0x17 @ 1
initcall length_mt_init+0x0/0x17 returned 0 after XX usecs
calling limit_mt_init+0x0/0x12 @ 1
initcall limit_mt_init+0x0/0x12 returned 0 after XX usecs
calling mac_mt_init+0x0/0x12 @ 1
initcall mac_mt_init+0x0/0x12 returned 0 after XX usecs
calling multiport_mt_init+0x0/0x17 @ 1
initcall multiport_mt_init+0x0/0x17 returned 0 after XX usecs
calling xt_osf_init+0x0/0x8d @ 1
initcall xt_osf_init+0x0/0x8d returned 0 after XX usecs
calling owner_mt_init+0x0/0x12 @ 1
initcall owner_mt_init+0x0/0x12 returned 0 after XX usecs
calling pkttype_mt_init+0x0/0x12 @ 1
initcall pkttype_mt_init+0x0/0x12 returned 0 after XX usecs
calling quota_mt_init+0x0/0x12 @ 1
initcall quota_mt_init+0x0/0x12 returned 0 after XX usecs
calling realm_mt_init+0x0/0x12 @ 1
initcall realm_mt_init+0x0/0x12 returned 0 after XX usecs
calling recent_mt_init+0x0/0x7a @ 1
initcall recent_mt_init+0x0/0x7a returned 0 after XX usecs
calling state_mt_init+0x0/0x12 @ 1
initcall state_mt_init+0x0/0x12 returned 0 after XX usecs
calling statistic_mt_init+0x0/0x12 @ 1
initcall statistic_mt_init+0x0/0x12 returned 0 after XX usecs
calling string_mt_init+0x0/0x12 @ 1
initcall string_mt_init+0x0/0x12 returned 0 after XX usecs
calling tcpmss_mt_init+0x0/0x17 @ 1
initcall tcpmss_mt_init+0x0/0x17 returned 0 after XX usecs
calling u32_mt_init+0x0/0x12 @ 1
initcall u32_mt_init+0x0/0x12 returned 0 after XX usecs
calling sysctl_ipv4_init+0x0/0x87 @ 1
initcall sysctl_ipv4_init+0x0/0x87 returned 0 after XX usecs
calling ipip_init+0x0/0x60 @ 1
IPv4 over IPv4 tunneling driver
initcall ipip_init+0x0/0x60 returned 0 after XX usecs
calling init_syncookies+0x0/0x19 @ 1
initcall init_syncookies+0x0/0x19 returned 0 after XX usecs
calling tunnel4_init+0x0/0x66 @ 1
initcall tunnel4_init+0x0/0x66 returned 0 after XX usecs
calling ipv4_netfilter_init+0x0/0x12 @ 1
initcall ipv4_netfilter_init+0x0/0x12 returned 0 after XX usecs
calling nf_conntrack_l3proto_ipv4_init+0x0/0x14b @ 1
initcall nf_conntrack_l3proto_ipv4_init+0x0/0x14b returned 0 after XX usecs
calling nf_nat_init+0x0/0x111 @ 1
initcall nf_nat_init+0x0/0x111 returned 0 after XX usecs
calling nf_defrag_init+0x0/0x17 @ 1
initcall nf_defrag_init+0x0/0x17 returned 0 after XX usecs
calling nf_nat_ftp_init+0x0/0x1f @ 1
initcall nf_nat_ftp_init+0x0/0x1f returned 0 after XX usecs
calling init+0x0/0xd7 @ 1
initcall init+0x0/0xd7 returned 0 after XX usecs
calling nf_nat_irc_init+0x0/0x1f @ 1
initcall nf_nat_irc_init+0x0/0x1f returned 0 after XX usecs
calling nf_nat_sip_init+0x0/0xa9 @ 1
initcall nf_nat_sip_init+0x0/0xa9 returned 0 after XX usecs
calling ip_tables_init+0x0/0xaa @ 1
ip_tables: (C) 2000-2006 Netfilter Core Team
initcall ip_tables_init+0x0/0xaa returned 0 after XX usecs
calling iptable_filter_init+0x0/0x6f @ 1
initcall iptable_filter_init+0x0/0x6f returned 0 after XX usecs
calling iptable_mangle_init+0x0/0x51 @ 1
initcall iptable_mangle_init+0x0/0x51 returned 0 after XX usecs
calling nf_nat_standalone_init+0x0/0x59 @ 1
initcall nf_nat_standalone_init+0x0/0x59 returned 0 after XX usecs
calling ecn_mt_init+0x0/0x12 @ 1
initcall ecn_mt_init+0x0/0x12 returned 0 after XX usecs
calling ecn_tg_init+0x0/0x12 @ 1
initcall ecn_tg_init+0x0/0x12 returned 0 after XX usecs
calling log_tg_init+0x0/0x29 @ 1
initcall log_tg_init+0x0/0x29 returned 0 after XX usecs
calling masquerade_tg_init+0x0/0x39 @ 1
initcall masquerade_tg_init+0x0/0x39 returned 0 after XX usecs
calling netmap_tg_init+0x0/0x12 @ 1
initcall netmap_tg_init+0x0/0x12 returned 0 after XX usecs
calling redirect_tg_init+0x0/0x12 @ 1
initcall redirect_tg_init+0x0/0x12 returned 0 after XX usecs
calling reject_tg_init+0x0/0x12 @ 1
initcall reject_tg_init+0x0/0x12 returned 0 after XX usecs
calling ip_queue_init+0x0/0x13a @ 1
initcall ip_queue_init+0x0/0x13a returned 0 after XX usecs
calling inet_diag_init+0x0/0x72 @ 1
initcall inet_diag_init+0x0/0x72 returned 0 after XX usecs
calling tcp_diag_init+0x0/0x12 @ 1
initcall tcp_diag_init+0x0/0x12 returned 0 after XX usecs
calling bictcp_register+0x0/0x12 @ 1
TCP bic registered
initcall bictcp_register+0x0/0x12 returned 0 after XX usecs
calling cubictcp_register+0x0/0x6c @ 1
TCP cubic registered
initcall cubictcp_register+0x0/0x6c returned 0 after XX usecs
calling tcp_westwood_register+0x0/0x12 @ 1
TCP westwood registered
initcall tcp_westwood_register+0x0/0x12 returned 0 after XX usecs
calling hybla_register+0x0/0x12 @ 1
TCP hybla registered
initcall hybla_register+0x0/0x12 returned 0 after XX usecs
calling tcp_vegas_register+0x0/0x14 @ 1
TCP vegas registered
initcall tcp_vegas_register+0x0/0x14 returned 0 after XX usecs
calling inet6_init+0x0/0x2ba @ 1
NET: Registered protocol family 10
initcall inet6_init+0x0/0x2ba returned 0 after XX usecs
calling tunnel6_init+0x0/0x66 @ 1
initcall tunnel6_init+0x0/0x66 returned 0 after XX usecs
calling ip6_tables_init+0x0/0xaa @ 1
ip6_tables: (C) 2000-2006 Netfilter Core Team
initcall ip6_tables_init+0x0/0xaa returned 0 after XX usecs
calling ip6table_filter_init+0x0/0x6f @ 1
initcall ip6table_filter_init+0x0/0x6f returned 0 after XX usecs
calling ip6table_mangle_init+0x0/0x51 @ 1
initcall ip6table_mangle_init+0x0/0x51 returned 0 after XX usecs
calling nf_conntrack_l3proto_ipv6_init+0x0/0xfc @ 1
initcall nf_conntrack_l3proto_ipv6_init+0x0/0xfc returned 0 after XX usecs
calling nf_defrag_init+0x0/0x54 @ 1
initcall nf_defrag_init+0x0/0x54 returned 0 after XX usecs
calling log_tg6_init+0x0/0x29 @ 1
initcall log_tg6_init+0x0/0x29 returned 0 after XX usecs
calling reject_tg6_init+0x0/0x12 @ 1
initcall reject_tg6_init+0x0/0x12 returned 0 after XX usecs
calling sit_init+0x0/0x60 @ 1
IPv6 over IPv4 tunneling driver
initcall sit_init+0x0/0x60 returned 0 after XX usecs
calling ip6_tunnel_init+0x0/0x8e @ 1
initcall ip6_tunnel_init+0x0/0x8e returned 0 after XX usecs
calling packet_init+0x0/0x47 @ 1
NET: Registered protocol family 17
initcall packet_init+0x0/0x47 returned 0 after XX usecs
calling br_init+0x0/0xa2 @ 1
initcall br_init+0x0/0xa2 returned 0 after XX usecs
calling init_rpcsec_gss+0x0/0x4d @ 1
initcall init_rpcsec_gss+0x0/0x4d returned 0 after XX usecs
calling vlan_proto_init+0x0/0x82 @ 1
802.1Q VLAN Support v1.8
initcall vlan_proto_init+0x0/0x82 returned 0 after XX usecs
calling init_dns_resolver+0x0/0x108 @ 1
Registering the dns_resolver key type
initcall init_dns_resolver+0x0/0x108 returned 0 after XX usecs
calling mcheck_debugfs_init+0x0/0x3b @ 1
initcall mcheck_debugfs_init+0x0/0x3b returned 0 after XX usecs
calling severities_debugfs_init+0x0/0x3b @ 1
initcall severities_debugfs_init+0x0/0x3b returned 0 after XX usecs
calling hpet_insert_resource+0x0/0x23 @ 1
initcall hpet_insert_resource+0x0/0x23 returned 1 after XX usecs
initcall hpet_insert_resource+0x0/0x23 returned with error code 1
calling lapic_insert_resource+0x0/0x3f @ 1
initcall lapic_insert_resource+0x0/0x3f returned -1 after XX usecs
initcall lapic_insert_resource+0x0/0x3f returned with error code -1
calling io_apic_bug_finalize+0x0/0x1b @ 1
initcall io_apic_bug_finalize+0x0/0x1b returned 0 after XX usecs
calling check_early_ioremap_leak+0x0/0x50 @ 1
initcall check_early_ioremap_leak+0x0/0x50 returned 0 after XX usecs
calling pat_memtype_list_init+0x0/0x32 @ 1
initcall pat_memtype_list_init+0x0/0x32 returned 0 after XX usecs
calling sched_init_debug+0x0/0x24 @ 1
initcall sched_init_debug+0x0/0x24 returned 0 after XX usecs
calling init_oops_id+0x0/0x31 @ 1
initcall init_oops_id+0x0/0x31 returned 0 after XX usecs
calling printk_late_init+0x0/0x50 @ 1
initcall printk_late_init+0x0/0x50 returned 0 after XX usecs
calling pm_qos_power_init+0x0/0xca @ 1
initcall pm_qos_power_init+0x0/0xca returned 0 after XX usecs
calling alarmtimer_init_late+0x0/0x73 @ 1
No RTC device found, ALARM timers will not wake from suspend
initcall alarmtimer_init_late+0x0/0x73 returned 0 after XX usecs
calling clear_boot_tracer+0x0/0x2d @ 1
initcall clear_boot_tracer+0x0/0x2d returned 0 after XX usecs
calling max_swapfiles_check+0x0/0x8 @ 1
initcall max_swapfiles_check+0x0/0x8 returned 0 after XX usecs
calling set_recommended_min_free_kbytes+0x0/0x82 @ 1
initcall set_recommended_min_free_kbytes+0x0/0x82 returned 0 after XX usecs
calling random32_reseed+0x0/0xb3 @ 1
initcall random32_reseed+0x0/0xb3 returned 0 after XX usecs
calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1
initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after XX usecs
calling pci_sysfs_init+0x0/0x51 @ 1
initcall pci_sysfs_init+0x0/0x51 returned 0 after XX usecs
calling boot_wait_for_devices+0x0/0x30 @ 1
XENBUS: Device with no driver: device/console/0
initcall boot_wait_for_devices+0x0/0x30 returned 0 after XX usecs
calling seqgen_init+0x0/0xf @ 1
initcall seqgen_init+0x0/0xf returned 0 after XX usecs
calling scsi_complete_async_scans+0x0/0x11b @ 1
initcall scsi_complete_async_scans+0x0/0x11b returned 0 after XX usecs
calling rtc_hctosys+0x0/0x10d @ 1
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
initcall rtc_hctosys+0x0/0x10d returned -19 after XX usecs
calling powernowk8_init+0x0/0x1bf @ 1
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ (1 cpu cores) (version 2.20.00)
[Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects
powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup
initcall powernowk8_init+0x0/0x1bf returned -19 after XX usecs
calling acpi_cpufreq_init+0x0/0xc1 @ 1
initcall acpi_cpufreq_init+0x0/0xc1 returned 0 after XX usecs
calling memmap_init+0x0/0x34 @ 1
initcall memmap_init+0x0/0x34 returned 0 after XX usecs
calling pci_mmcfg_late_insert_resources+0x0/0x5e @ 1
initcall pci_mmcfg_late_insert_resources+0x0/0x5e returned 1 after XX usecs
initcall pci_mmcfg_late_insert_resources+0x0/0x5e returned with error code 1
calling tcp_congestion_default+0x0/0x12 @ 1
initcall tcp_congestion_default+0x0/0x12 returned 0 after XX usecs
calling ip_auto_config+0x0/0xd7b @ 1
IP-Config: Complete:
device=eth0, addr=192.168.12.1, mask=255.255.255.0, gw=192.168.12.2,
host=yumi, domain=, nis-domain=uguu.de,
bootserver=127.0.255.255, rootserver=127.0.255.255, rootpath=
initcall ip_auto_config+0x0/0xd7b returned 0 after XX usecs
calling initialize_hashrnd+0x0/0x19 @ 1
initcall initialize_hashrnd+0x0/0x19 returned 0 after XX usecs
async_waiting @ 1
async_continuing @ 1 after 0 usec
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
async_waiting @ 1
async_continuing @ 1 after 0 usec
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3-fs (xvda1): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (xvda1): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 202:1.
--
Tobias PGP: http://8ef7ddba.uguu.de
^ permalink raw reply [flat|nested] 6+ messages in thread