public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Sarah Sharp <sarah.a.sharp@linux.intel.com>
To: Maarten Lankhorst <m.b.lankhorst@gmail.com>
Cc: linux-usb@vger.kernel.org,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] xhci: Add reset on resume quirk for asrock p67 host
Date: Wed, 15 Jun 2011 13:36:31 -0700	[thread overview]
Message-ID: <20110615203631.GF5382@xanatos> (raw)
In-Reply-To: <4DF9160D.8090109@gmail.com>

On Wed, Jun 15, 2011 at 10:29:01PM +0200, Maarten Lankhorst wrote:
> The asrock p67 xhci controller completely dies on resume,
> add a quirk for this, to bring the host back online after a suspend.
> 
> This should be backported to stable kernels as far back as 2.6.34.

Why 2.6.34?  Only kernels as old as 2.6.37 had xHCI suspend and resume
support.  Before 2.6.37, the xHCI driver would prevent the system from
suspending at all.

Otherwise looks fine.

Sarah Sharp

> Signed-off-by: Maarten Lankhorst <m.b.lankhorst@gmail.com>
> Cc: stable@kernel.org
> ---
> I have no idea if the vendor name is correct. lspci didn't list it.
> 
> diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
> index 17541d0..cb16de2 100644
> --- a/drivers/usb/host/xhci-pci.c
> +++ b/drivers/usb/host/xhci-pci.c
> @@ -29,6 +29,9 @@
>  #define PCI_VENDOR_ID_FRESCO_LOGIC	0x1b73
>  #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK	0x1000
>  
> +#define PCI_VENDOR_ID_ETRON		0x1b6f
> +#define PCI_DEVICE_ID_ASROCK_P67	0x7023
> +
>  static const char hcd_name[] = "xhci_hcd";
>  
>  /* called after powerup, by probe or system-pm "wakeup" */
> @@ -134,6 +137,11 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
>  		xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
>  		xhci->limit_active_eps = 64;
>  	}
> +	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
> +			pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
> +		xhci->quirks |= XHCI_RESET_ON_RESUME;
> +		xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
> +	}
>  
>  	/* Make sure the HC is halted. */
>  	retval = xhci_halt(xhci);
> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> index 06e7023..42fd032 100644
> --- a/drivers/usb/host/xhci.c
> +++ b/drivers/usb/host/xhci.c
> @@ -759,6 +759,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
>  		msleep(100);
>  
>  	spin_lock_irq(&xhci->lock);
> +	if (xhci->quirks & XHCI_RESET_ON_RESUME)
> +		hibernated = 0;
>  
>  	if (!hibernated) {
>  		/* step 1: restore register */
> diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
> index 7d1ea3b..b769a75 100644
> --- a/drivers/usb/host/xhci.h
> +++ b/drivers/usb/host/xhci.h
> @@ -1308,6 +1308,7 @@ struct xhci_hcd {
>   */
>  #define XHCI_EP_LIMIT_QUIRK	(1 << 5)
>  #define XHCI_BROKEN_MSI		(1 << 6)
> +#define XHCI_RESET_ON_RESUME	(1 << 7)
>  	unsigned int		num_active_eps;
>  	unsigned int		limit_active_eps;
>  	/* There are two roothubs to keep track of bus suspend info for */
> 
> 

  reply	other threads:[~2011-06-15 20:36 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-06-15  7:07 device plugged into xhci port not detected after a resume Maarten Lankhorst
2011-06-15 15:38 ` Greg KH
2011-06-15 16:17   ` Maarten Lankhorst
2011-06-15 16:58 ` Sarah Sharp
2011-06-15 17:29   ` Maarten Lankhorst
2011-06-15 17:39   ` Maarten Lankhorst
2011-06-15 19:59     ` Sarah Sharp
2011-06-15 20:19       ` Sarah Sharp
2011-06-15 20:29       ` [PATCH] xhci: Add reset on resume quirk for asrock p67 host Maarten Lankhorst
2011-06-15 20:36         ` Sarah Sharp [this message]
2011-06-15 20:38           ` Maarten Lankhorst
2011-06-15 20:39             ` Sarah Sharp
2011-06-15 21:00           ` Alan Stern
2011-06-15 21:21             ` Sarah Sharp
2011-06-15 21:41               ` Maarten Lankhorst
2011-06-15 22:15                 ` Maarten Lankhorst

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110615203631.GF5382@xanatos \
    --to=sarah.a.sharp@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=m.b.lankhorst@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox