From: Guenter Roeck <guenter.roeck@ericsson.com>
To: Alexander Stein <alexander.stein@systec-electronic.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>,
Jean Delvare <khali@linux-fr.org>,
"lm-sensors@lm-sensors.org" <lm-sensors@lm-sensors.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: coretemp: Support for Intel Atom E6XX CPU (TunnelCreek)?
Date: Mon, 27 Jun 2011 06:42:39 -0700 [thread overview]
Message-ID: <20110627134239.GA10808@ericsson.com> (raw)
In-Reply-To: <201106271220.51953.alexander.stein@systec-electronic.com>
On Mon, Jun 27, 2011 at 06:20:51AM -0400, Alexander Stein wrote:
> Hello,
>
> I have a patch (for v2.6.39) which adds support for Intel Atom E6XX
> (TunnelCreek) to coretemp. It's merely only adding x86_model 0x26.
> But there are models (e.g. E660 and E660T) with different TjMax, namely 90
> degrees C and 110 degrees C. But these different model can't be detected by
> reading from hardware.
> IMO there should be some support to adjust the temperature from userspace.
> Reading Documentation/hwmon/sysfs-interface only temp1_offset seems to be
> useable. But I think it is somewhat misleading (especially on multicores),
> because there must only be one offset.
> What do you think about this?
>
You can adjust the reported temperature with an entry in sensors3.conf.
Guenter
next prev parent reply other threads:[~2011-06-27 13:43 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-27 10:20 coretemp: Support for Intel Atom E6XX CPU (TunnelCreek)? Alexander Stein
2011-06-27 13:42 ` Guenter Roeck [this message]
2011-06-27 14:41 ` Jean Delvare
2011-06-27 16:05 ` Alexander Stein
2011-06-27 16:10 ` Guenter Roeck
2011-06-27 16:40 ` [lm-sensors] " R, Durgadoss
2011-06-27 16:50 ` Guenter Roeck
2011-06-27 16:54 ` R, Durgadoss
2011-08-03 12:58 ` Alexander Stein
2011-08-03 13:26 ` R, Durgadoss
2011-08-03 14:40 ` Alexander Stein
2011-09-16 16:21 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110627134239.GA10808@ericsson.com \
--to=guenter.roeck@ericsson.com \
--cc=alexander.stein@systec-electronic.com \
--cc=fenghua.yu@intel.com \
--cc=khali@linux-fr.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox