* [REGRESSION] suspend/resume broken on T510
@ 2011-06-30 22:00 Marc Koschewski
2011-06-30 22:07 ` Rafael J. Wysocki
0 siblings, 1 reply; 5+ messages in thread
From: Marc Koschewski @ 2011-06-30 22:00 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 762 bytes --]
Hi guys,
I just thought to wait some what longer than -rc3 to report: suspend/resume is
broken in the current git. I blacklisted the 'mei' module so the suspend worked
as of rc4 (last 'first tested and working' version) with knowledge of the
mei-bug.
However, my system does not resume anymore on my T510. After suspend the 'moon'
turns on as usual on 3.0.0-git and the box sleeps. After opening the lid it somehow
wakes up but doesn't boot/resume. It just stalls after some HDD activity.
If have no idea what it could be - and I unfortunately cannot bisect it down to
anything > 2.6.39. I left out rc1 and rc2 this time due to having no time to
experiment this month. However, my .config is attached if anyone needs it...
Regards,
Marc
--
Marc Koschewski
[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 79875 bytes --]
#
# Automatically generated make config: don't edit
# Linux/i386 3.0.0-rc5 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
# CONFIG_ZONE_DMA is not set
# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_KTIME_SCALAR=y
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION="-dezzy"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_FHANDLE=y
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
# CONFIG_SPARSE_IRQ is not set
#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_BOOST=y
CONFIG_RCU_BOOST_PRIO=1
CONFIG_RCU_BOOST_DELAY=500
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EXPERT=y
# CONFIG_UID16 is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PCI_QUIRKS is not set
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_X86_MPPARSE is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_X86_32_IRIS is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
CONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_CMPXCHG_LOCAL=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
# CONFIG_CPU_SUP_CYRIX_32 is not set
# CONFIG_CPU_SUP_AMD is not set
# CONFIG_CPU_SUP_CENTAUR is not set
# CONFIG_CPU_SUP_TRANSMETA_32 is not set
# CONFIG_CPU_SUP_UMC_32 is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=4
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_VM86 is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not set
CONFIG_HIGHMEM64G=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_CLEANCACHE=y
CONFIG_HIGHPTE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION="/dev/sda8"
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=m
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
CONFIG_ACPI_SBS=m
# CONFIG_ACPI_HED is not set
CONFIG_ACPI_CUSTOM_METHOD=m
# CONFIG_ACPI_APEI is not set
# CONFIG_SFI is not set
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# x86 CPU frequency scaling drivers
#
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set
#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_INTEL_IDLE=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_DMAR is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
# CONFIG_RAPIDIO is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_IP_MROUTE=y
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
# CONFIG_NETFILTER_XT_MARK is not set
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=y
CONFIG_IP_NF_MANGLE=y
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=y
CONFIG_NF_CONNTRACK_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_TARGET_LOG=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_MANGLE=y
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_L2TP=m
# CONFIG_L2TP_DEBUGFS is not set
# CONFIG_L2TP_V3 is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_INGRESS is not set
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_ACT_CSUM is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=m
# CONFIG_BT_RFCOMM_TTY is not set
CONFIG_BT_BNEP=m
# CONFIG_BT_BNEP_MC_FILTER is not set
# CONFIG_BT_BNEP_PROTO_FILTER is not set
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
# CONFIG_BT_ATH3K is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=m
CONFIG_NL80211_TESTMODE=y
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
# CONFIG_MAC80211_RC_PID is not set
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_RFKILL_REGULATOR is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=4
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_ATA_SFF is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_MIRROR=y
# CONFIG_DM_RAID is not set
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_DM_FLAKEY is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_MII is not set
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
CONFIG_E1000E=m
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_STMMAC_ETH is not set
# CONFIG_PCH_GBE is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_ATH_COMMON is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_HOSTAP is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
CONFIG_IWLAGN=m
#
# Debugging Options
#
CONFIG_IWLWIFI_DEBUG=y
CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE=y
CONFIG_IWLWIFI_DEVICE_SVTOOL=y
# CONFIG_IWL_P2P is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWM is not set
# CONFIG_LIBERTAS is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_WL1251 is not set
# CONFIG_WL12XX_MENU is not set
# CONFIG_ZD1211RW is not set
# CONFIG_MWIFIEX is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_WAN is not set
#
# CAIF transport drivers
#
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=900
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_CMA3000 is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_NOZOMI is not set
# CONFIG_ISI is not set
# CONFIG_N_HDLC is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVKMEM=y
# CONFIG_STALDRV is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_RAMOOPS=m
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_INTEL_MID is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
# CONFIG_I2C_EG20T is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ20Z75 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_CORETEMP=m
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
# CONFIG_SENSORS_ADM1275 is not set
# CONFIG_SENSORS_MAX16064 is not set
# CONFIG_SENSORS_MAX34440 is not set
# CONFIG_SENSORS_MAX8688 is not set
# CONFIG_SENSORS_UCD9000 is not set
# CONFIG_SENSORS_UCD9200 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_APPLESMC is not set
#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
# CONFIG_SC520_WDT is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC7240_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
CONFIG_MFD_SUPPORT=y
CONFIG_MFD_CORE=m
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_CS5535 is not set
CONFIG_LPC_SCH=m
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_WL1273_CORE is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_DUMMY is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_AD5398 is not set
CONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_DVB_CORE=m
CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
CONFIG_RC_CORE=m
CONFIG_LIRC=m
# CONFIG_RC_MAP is not set
# CONFIG_IR_NEC_DECODER is not set
# CONFIG_IR_RC5_DECODER is not set
# CONFIG_IR_RC6_DECODER is not set
# CONFIG_IR_JVC_DECODER is not set
# CONFIG_IR_SONY_DECODER is not set
# CONFIG_IR_RC5_SZ_DECODER is not set
# CONFIG_IR_LIRC_CODEC is not set
# CONFIG_IR_ENE is not set
# CONFIG_IR_IMON is not set
# CONFIG_IR_MCEUSB is not set
# CONFIG_IR_ITE_CIR is not set
# CONFIG_IR_FINTEK is not set
# CONFIG_IR_NUVOTON is not set
# CONFIG_IR_REDRAT3 is not set
# CONFIG_IR_STREAMZAP is not set
# CONFIG_IR_WINBOND_CIR is not set
# CONFIG_RC_LOOPBACK is not set
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=m
#
# Audio decoders, processors and mixers
#
#
# RDS decoders
#
#
# Video decoders
#
#
# Video and audio decoders
#
#
# MPEG video encoders
#
#
# Video encoders
#
#
# Camera sensor devices
#
#
# Video improvement chips
#
#
# Miscelaneous helper chips
#
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_TIMBERDALE is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_CX23885 is not set
# CONFIG_VIDEO_AU0828 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CX18 is not set
# CONFIG_VIDEO_SAA7164 is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_VIDEO_SR030PC30 is not set
# CONFIG_VIDEO_NOON010PC30 is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
# CONFIG_USB_GSPCA is not set
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_HDPVR is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_TLG2300 is not set
# CONFIG_VIDEO_CX231XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_DVB_MAX_ADAPTERS=2
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#
# CONFIG_TTPCI_EEPROM is not set
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET_CORE is not set
#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
# CONFIG_DVB_USB_A800 is not set
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
# CONFIG_DVB_USB_DIBUSB_MC is not set
# CONFIG_DVB_USB_DIB0700 is not set
# CONFIG_DVB_USB_UMT_010 is not set
# CONFIG_DVB_USB_CXUSB is not set
# CONFIG_DVB_USB_M920X is not set
# CONFIG_DVB_USB_GL861 is not set
# CONFIG_DVB_USB_AU6610 is not set
# CONFIG_DVB_USB_DIGITV is not set
# CONFIG_DVB_USB_VP7045 is not set
# CONFIG_DVB_USB_VP702X is not set
# CONFIG_DVB_USB_GP8PSK is not set
# CONFIG_DVB_USB_NOVA_T_USB2 is not set
# CONFIG_DVB_USB_TTUSB2 is not set
# CONFIG_DVB_USB_DTT200U is not set
# CONFIG_DVB_USB_OPERA1 is not set
# CONFIG_DVB_USB_AF9005 is not set
# CONFIG_DVB_USB_DW2102 is not set
# CONFIG_DVB_USB_CINERGY_T2 is not set
# CONFIG_DVB_USB_ANYSEE is not set
# CONFIG_DVB_USB_DTV5100 is not set
# CONFIG_DVB_USB_AF9015 is not set
# CONFIG_DVB_USB_CE6230 is not set
# CONFIG_DVB_USB_FRIIO is not set
# CONFIG_DVB_USB_EC168 is not set
# CONFIG_DVB_USB_AZ6027 is not set
# CONFIG_DVB_USB_LME2510 is not set
# CONFIG_DVB_USB_TECHNISAT_USB2 is not set
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_SMS_SIANO_MDTV is not set
#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set
#
# Supported BT878 Adapters
#
#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set
#
# Supported SDMC DM1105 Adapters
#
# CONFIG_DVB_DM1105 is not set
#
# Supported Earthsoft PT1 Adapters
#
# CONFIG_DVB_PT1 is not set
#
# Supported Mantis Adapters
#
# CONFIG_MANTIS_CORE is not set
#
# Supported nGene Adapters
#
# CONFIG_DVB_NGENE is not set
#
# Supported DVB Frontends
#
CONFIG_DVB_FE_CUSTOMISE=y
#
# Customise DVB Frontends
#
#
# Multistandard (satellite) frontends
#
# CONFIG_DVB_STB0899 is not set
# CONFIG_DVB_STB6100 is not set
# CONFIG_DVB_STV090x is not set
# CONFIG_DVB_STV6110x is not set
#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
# CONFIG_DVB_MT312 is not set
# CONFIG_DVB_ZL10036 is not set
# CONFIG_DVB_ZL10039 is not set
# CONFIG_DVB_S5H1420 is not set
# CONFIG_DVB_STV0288 is not set
# CONFIG_DVB_STB6000 is not set
# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_STV6110 is not set
# CONFIG_DVB_STV0900 is not set
# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not set
# CONFIG_DVB_TDA8261 is not set
# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_TUNER_ITD1000 is not set
# CONFIG_DVB_TUNER_CX24113 is not set
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TUA6100 is not set
# CONFIG_DVB_CX24116 is not set
# CONFIG_DVB_SI21XX is not set
# CONFIG_DVB_DS3000 is not set
# CONFIG_DVB_MB86A16 is not set
#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_SP8870 is not set
# CONFIG_DVB_SP887X is not set
# CONFIG_DVB_CX22700 is not set
# CONFIG_DVB_CX22702 is not set
# CONFIG_DVB_S5H1432 is not set
# CONFIG_DVB_DRXD is not set
# CONFIG_DVB_L64781 is not set
# CONFIG_DVB_TDA1004X is not set
# CONFIG_DVB_NXT6000 is not set
# CONFIG_DVB_MT352 is not set
# CONFIG_DVB_ZL10353 is not set
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
# CONFIG_DVB_DIB7000M is not set
# CONFIG_DVB_DIB7000P is not set
# CONFIG_DVB_DIB9000 is not set
# CONFIG_DVB_TDA10048 is not set
# CONFIG_DVB_AF9013 is not set
# CONFIG_DVB_EC100 is not set
# CONFIG_DVB_STV0367 is not set
# CONFIG_DVB_CXD2820R is not set
#
# DVB-C (cable) frontends
#
# CONFIG_DVB_VES1820 is not set
# CONFIG_DVB_TDA10021 is not set
# CONFIG_DVB_TDA10023 is not set
# CONFIG_DVB_STV0297 is not set
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
# CONFIG_DVB_NXT200X is not set
# CONFIG_DVB_OR51211 is not set
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
# CONFIG_DVB_LGDT3305 is not set
# CONFIG_DVB_S5H1409 is not set
# CONFIG_DVB_AU8522 is not set
# CONFIG_DVB_S5H1411 is not set
#
# ISDB-T (terrestrial) frontends
#
# CONFIG_DVB_S921 is not set
# CONFIG_DVB_DIB8000 is not set
# CONFIG_DVB_MB86A20S is not set
#
# Digital terrestrial only tuners/PLL
#
# CONFIG_DVB_PLL is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
# CONFIG_DVB_TUNER_DIB0090 is not set
#
# SEC control devices for DVB-S
#
# CONFIG_DVB_LNBP21 is not set
# CONFIG_DVB_ISL6405 is not set
# CONFIG_DVB_ISL6421 is not set
# CONFIG_DVB_ISL6423 is not set
# CONFIG_DVB_LGS8GL5 is not set
# CONFIG_DVB_LGS8GXX is not set
# CONFIG_DVB_ATBM8830 is not set
# CONFIG_DVB_TDA665x is not set
# CONFIG_DVB_IX2505V is not set
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
# CONFIG_VGA_ARB is not set
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_TTM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_STUB_POULSBO is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_WMT_GE_ROPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=m
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=y
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
CONFIG_SND_ALOOP=m
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_INPUT_JACK is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
# CONFIG_SND_HDA_CODEC_REALTEK is not set
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
# CONFIG_SND_HDA_CODEC_HDMI is not set
# CONFIG_SND_HDA_CODEC_CIRRUS is not set
CONFIG_SND_HDA_CODEC_CONEXANT=y
# CONFIG_SND_HDA_CODEC_CA0110 is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
# CONFIG_SND_HDA_GENERIC is not set
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=32
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_USB is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_QUANTA is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_ROCCAT_ARVO is not set
# CONFIG_HID_ROCCAT_KONE is not set
# CONFIG_HID_ROCCAT_KONEPLUS is not set
# CONFIG_HID_ROCCAT_KOVAPLUS is not set
# CONFIG_HID_ROCCAT_PYRA is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=m
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_EZUSB is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
CONFIG_USB_SERIAL_QUALCOMM=m
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_WWAN=m
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
# CONFIG_MMC_SDHCI_PLTFM is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_DELL_NETBOOKS is not set
CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_NFC_DEVICES is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_TIMB_DMA is not set
# CONFIG_PCH_DMA is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
CONFIG_STAGING=y
# CONFIG_DIGIEPCA is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_COMPUTONE is not set
# CONFIG_ET131X is not set
# CONFIG_SLICOSS is not set
# CONFIG_VIDEO_GO7007 is not set
# CONFIG_VIDEO_CX25821 is not set
# CONFIG_VIDEO_TM6000 is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_W35UND is not set
# CONFIG_PRISM2_USB is not set
# CONFIG_ECHO is not set
# CONFIG_BRCMUTIL is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
# CONFIG_COMEDI is not set
# CONFIG_ASUS_OLED is not set
# CONFIG_R8187SE is not set
# CONFIG_RTL8192U is not set
# CONFIG_RTL8192E is not set
# CONFIG_R8712U is not set
# CONFIG_RTS_PSTOR is not set
# CONFIG_TRANZPORT is not set
# CONFIG_POHMELFS is not set
# CONFIG_LINE6_USB is not set
# CONFIG_DRM_VMWGFX is not set
CONFIG_DRM_NOUVEAU=m
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_DRM_NOUVEAU_DEBUG=y
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_USB_SERIAL_QUATECH2 is not set
# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_HYPERV is not set
# CONFIG_VME_BUS is not set
# CONFIG_DX_SEP is not set
# CONFIG_IIO is not set
# CONFIG_CS5535_GPIO is not set
CONFIG_XVMALLOC=y
CONFIG_ZRAM=m
# CONFIG_ZRAM_DEBUG is not set
CONFIG_ZCACHE=m
# CONFIG_FB_SM7XX is not set
# CONFIG_VIDEO_DT3155 is not set
# CONFIG_CRYSTALHD is not set
# CONFIG_FB_XGI is not set
# CONFIG_LIRC_STAGING is not set
# CONFIG_EASYCAP is not set
# CONFIG_SOLO6X10 is not set
# CONFIG_ACPI_QUICKSTART is not set
CONFIG_MACH_NO_WESTBRIDGE=y
# CONFIG_ATH6K_LEGACY is not set
# CONFIG_USB_ENESTORAGE is not set
# CONFIG_BCM_WIMAX is not set
# CONFIG_FT1000 is not set
#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_DRM_PSB is not set
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
CONFIG_INTEL_MEI=m
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_WMI is not set
# CONFIG_DELL_WMI_AIO is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_TC1100_WMI is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WMI is not set
# CONFIG_PANASONIC_LAPTOP is not set
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ASUS_WMI is not set
CONFIG_ACPI_WMI=m
# CONFIG_MSI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
CONFIG_INTEL_IPS=m
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not set
CONFIG_MXM_WMI=m
CONFIG_CLKSRC_I8253=y
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_SIGMA is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT23=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=0
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_CPU_STALL_VERBOSE is not set
# CONFIG_LKDTM is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_BUILD_DOCSRC is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
CONFIG_IO_DELAY_NONE=y
CONFIG_DEFAULT_IO_DELAY_TYPE=3
# CONFIG_OPTIMIZE_INLINING is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
# CONFIG_KVM_AMD is not set
# CONFIG_VHOST_NET is not set
# CONFIG_LGUEST is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_NLATTR=y
CONFIG_AVERAGE=y
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [REGRESSION] suspend/resume broken on T510
2011-06-30 22:00 [REGRESSION] suspend/resume broken on T510 Marc Koschewski
@ 2011-06-30 22:07 ` Rafael J. Wysocki
2011-06-30 22:34 ` Marc Koschewski
2011-06-30 22:53 ` Marc Koschewski
0 siblings, 2 replies; 5+ messages in thread
From: Rafael J. Wysocki @ 2011-06-30 22:07 UTC (permalink / raw)
To: Marc Koschewski; +Cc: linux-kernel, Linux PM mailing list
Hi,
On Friday, July 01, 2011, Marc Koschewski wrote:
> Hi guys,
>
> I just thought to wait some what longer than -rc3 to report: suspend/resume is
> broken in the current git. I blacklisted the 'mei' module so the suspend worked
> as of rc4 (last 'first tested and working' version) with knowledge of the
> mei-bug.
>
> However, my system does not resume anymore on my T510. After suspend the 'moon'
> turns on as usual on 3.0.0-git and the box sleeps. After opening the lid it somehow
> wakes up but doesn't boot/resume. It just stalls after some HDD activity.
>
> If have no idea what it could be - and I unfortunately cannot bisect it down to
> anything > 2.6.39. I left out rc1 and rc2 this time due to having no time to
> experiment this month. However, my .config is attached if anyone needs it...
Well, perhaps let us know the hardware configuration (attach dmesg?).
Anyway, I'm not sure if there's anyone who can figure out what _may_ be wrong
on the basis of your description alone. It would be good if you could file
a bug in http://bugzilla.kernel.org and let me know its number.
Thanks,
Rafael
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [REGRESSION] suspend/resume broken on T510
2011-06-30 22:07 ` Rafael J. Wysocki
@ 2011-06-30 22:34 ` Marc Koschewski
2011-07-01 19:40 ` Rafael J. Wysocki
2011-06-30 22:53 ` Marc Koschewski
1 sibling, 1 reply; 5+ messages in thread
From: Marc Koschewski @ 2011-06-30 22:34 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: linux-kernel, Linux PM mailing list
[-- Attachment #1: Type: text/plain, Size: 1623 bytes --]
* Rafael J. Wysocki <rjw@sisk.pl> [2011-07-01 00:07:27 +0200]:
Hi Rafael,
I have attached some files here to let you know what machine won't resume.
Hope this helps,
Marc
> Hi,
>
> On Friday, July 01, 2011, Marc Koschewski wrote:
> > Hi guys,
> >
> > I just thought to wait some what longer than -rc3 to report: suspend/resume is
> > broken in the current git. I blacklisted the 'mei' module so the suspend worked
> > as of rc4 (last 'first tested and working' version) with knowledge of the
> > mei-bug.
> >
> > However, my system does not resume anymore on my T510. After suspend the 'moon'
> > turns on as usual on 3.0.0-git and the box sleeps. After opening the lid it somehow
> > wakes up but doesn't boot/resume. It just stalls after some HDD activity.
> >
> > If have no idea what it could be - and I unfortunately cannot bisect it down to
> > anything > 2.6.39. I left out rc1 and rc2 this time due to having no time to
> > experiment this month. However, my .config is attached if anyone needs it...
>
> Well, perhaps let us know the hardware configuration (attach dmesg?).
>
> Anyway, I'm not sure if there's anyone who can figure out what _may_ be wrong
> on the basis of your description alone. It would be good if you could file
> a bug in http://bugzilla.kernel.org and let me know its number.
>
> Thanks,
> Rafael
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
>
--
Marc Koschewski
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 110193 bytes --]
[ 0.000000] Linux version 2.6.39-dezzy (marc@marc) (gcc version 4.6.0-pre9999 20110421 (prerelease) rev. 172845 (Gentoo SVN) ) #1 SMP PREEMPT Thu May 19 08:39:45 CEST 2011
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf27c000 (usable)
[ 0.000000] BIOS-e820: 00000000bf27c000 - 00000000bf282000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf282000 - 00000000bf35f000 (usable)
[ 0.000000] BIOS-e820: 00000000bf35f000 - 00000000bf371000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf371000 - 00000000bf3f2000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf3f2000 - 00000000bf40f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf40f000 - 00000000bf46f000 (usable)
[ 0.000000] BIOS-e820: 00000000bf46f000 - 00000000bf668000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf668000 - 00000000bf6e8000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf6e8000 - 00000000bf70f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf70f000 - 00000000bf717000 (usable)
[ 0.000000] BIOS-e820: 00000000bf717000 - 00000000bf71f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf71f000 - 00000000bf76b000 (usable)
[ 0.000000] BIOS-e820: 00000000bf76b000 - 00000000bf777000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf777000 - 00000000bf77a000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf77a000 - 00000000bf781000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf781000 - 00000000bf782000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf782000 - 00000000bf78b000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf78b000 - 00000000bf78c000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf78c000 - 00000000bf79f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf79f000 - 00000000bf7ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable)
[ 0.000000] BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001fc000000 (usable)
[ 0.000000] BIOS-e820: 0000000200000000 - 000000023c000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: LENOVO 43495KG/43495KG, BIOS 6MET83WW (1.43 ) 02/24/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x23c000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask F00000000 write-back
[ 0.000000] 4 base 200000000 mask FC0000000 write-back
[ 0.000000] 5 base 23C000000 mask FFC000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037a00000 page 2M
[ 0.000000] 0037a00000 - 0037bfe000 page 4k
[ 0.000000] kernel direct mapping tables up to 37bfe000 @ 19fb000-1a00000
[ 0.000000] ACPI: RSDP 000f6870 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT bf7ef2e1 0009C (v01 LENOVO TP-6M 00001430 LTP 00000000)
[ 0.000000] ACPI: FACP bf7ef400 000F4 (v04 LENOVO TP-6M 00001430 LNVO 00000001)
[ 0.000000] ACPI: DSDT bf7ef7d1 0F34F (v01 LENOVO TP-6M 00001430 MSFT 03000001)
[ 0.000000] ACPI: FACS bf6e7000 00040
[ 0.000000] ACPI: SSDT bf7ef5b4 0021D (v01 LENOVO TP-6M 00001430 MSFT 03000001)
[ 0.000000] ACPI: ECDT bf7feb20 00052 (v01 LENOVO TP-6M 00001430 LNVO 00000001)
[ 0.000000] ACPI: APIC bf7feb72 00084 (v01 LENOVO TP-6M 00001430 LNVO 00000001)
[ 0.000000] ACPI: MCFG bf7fec2e 0003C (v01 LENOVO TP-6M 00001430 LNVO 00000001)
[ 0.000000] ACPI: HPET bf7fec6a 00038 (v01 LENOVO TP-6M 00001430 LNVO 00000001)
[ 0.000000] ACPI: ASF! bf7fedbe 000A4 (v16 LENOVO TP-6M 00001430 PTL 00000001)
[ 0.000000] ACPI: SLIC bf7fee62 00176 (v01 LENOVO TP-6M 00001430 LTP 00000000)
[ 0.000000] ACPI: BOOT bf7fefd8 00028 (v01 LENOVO TP-6M 00001430 LTP 00000001)
[ 0.000000] ACPI: SSDT bf6e591a 0084B (v01 LENOVO TP-6M 00001430 INTL 20050513)
[ 0.000000] ACPI: TCPA bf78b000 00032 (v02 PTL CRESTLN 06040000 00005A52)
[ 0.000000] ACPI: DMAR bf781000 00080 (v01 INTEL CP_DALE 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT bf779000 009F1 (v01 PmRef CpuPm 00003000 INTL 20060912)
[ 0.000000] ACPI: SSDT bf778000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
[ 0.000000] ACPI: SSDT bf777000 0049F (v01 PmRef ApTst 00003000 INTL 20060912)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 8260MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00037bfe
[ 0.000000] HighMem 0x00037bfe -> 0x0023c000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[9] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000bf27c
[ 0.000000] 0: 0x000bf282 -> 0x000bf35f
[ 0.000000] 0: 0x000bf40f -> 0x000bf46f
[ 0.000000] 0: 0x000bf70f -> 0x000bf717
[ 0.000000] 0: 0x000bf71f -> 0x000bf76b
[ 0.000000] 0: 0x000bf7ff -> 0x000bf800
[ 0.000000] 0: 0x00100000 -> 0x001fc000
[ 0.000000] 0: 0x00200000 -> 0x0023c000
[ 0.000000] On node 0 totalpages: 2061211
[ 0.000000] free_area_init_node: node 0, pgdat c14e92c0, node_mem_map f347d200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 16521 pages used for memmap
[ 0.000000] HighMem zone: 1816455 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f3200000 s25984 r0 d23168 u524288
[ 0.000000] pcpu-alloc: s25984 r0 d23168 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2042906
[ 0.000000] Kernel command line: init=/sbin/init root=/dev/sda7 ro resume=/dev/sda8 resume2=swap:/dev/sda8 thinkpad_acpi.fan_control=1 thinkpad_acpi.experimental=1 thinkpad_acpi.volume_control=1 acpi_osi="Linux" console=tty1 libata.dma=3 libata.noacpi=0 nouveau.noaccel=1 threadirqs rootfstype=ext4 acpi_sleep=s3_bios
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0023c000)
[ 0.000000] Memory: 8164640k/9371648k available (3705k kernel code, 80204k reserved, 1353k data, 368k init, 7331904k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff67000 - 0xfffff000 ( 608 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc14f1000 - 0xc154d000 ( 368 kB)
[ 0.000000] .data : 0xc139e538 - 0xc14f0ac0 (1353 kB)
[ 0.000000] .text : 0xc1000000 - 0xc139e538 (3705 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:384
[ 0.000000] CPU 0 irqstacks, hard=f2c0c000 soft=f2c0e000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty1] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 2660.254 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.50 BogoMIPS (lpj=2660254)
[ 0.000247] pid_max: default: 32768 minimum: 301
[ 0.000399] Mount-cache hash table entries: 512
[ 0.000642] CPU: Physical Processor ID: 0
[ 0.000766] CPU: Processor Core ID: 0
[ 0.000889] mce: CPU supports 9 MCE banks
[ 0.001016] CPU0: Thermal monitoring enabled (TM1)
[ 0.001145] using mwait in idle threads.
[ 0.001581] ACPI: Core revision 20110316
[ 0.013472] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.013991] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.024095] CPU0: Intel(R) Core(TM) i7 CPU M 620 @ 2.67GHz stepping 05
[ 0.125103] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.125402] ... version: 3
[ 0.125523] ... bit width: 48
[ 0.125644] ... generic registers: 4
[ 0.125764] ... value mask: 0000ffffffffffff
[ 0.125886] ... max period: 000000007fffffff
[ 0.126008] ... fixed-purpose events: 3
[ 0.126130] ... event mask: 000000070000000f
[ 0.138085] CPU 1 irqstacks, hard=f2cce000 soft=f2cd0000
[ 0.138088] Booting Node 0, Processors #1
[ 0.138158] smpboot cpu 1: start_ip = 99000
[ 0.148836] Initializing CPU#1
[ 0.232850] CPU 2 irqstacks, hard=f2cda000 soft=f2cdc000
[ 0.232985] #2
[ 0.233015] smpboot cpu 2: start_ip = 99000
[ 0.243345] Initializing CPU#2
[ 0.327608] CPU 3 irqstacks, hard=f2cea000 soft=f2cec000
[ 0.327743] #3 Ok.
[ 0.329885] smpboot cpu 3: start_ip = 99000
[ 0.340101] Initializing CPU#3
[ 0.420484] Brought up 4 CPUs
[ 0.420726] Total of 4 processors activated (21279.62 BogoMIPS).
[ 0.422526] PM: Registering ACPI NVS region at bf371000 (528384 bytes)
[ 0.422667] PM: Registering ACPI NVS region at bf668000 (524288 bytes)
[ 0.422801] PM: Registering ACPI NVS region at bf76b000 (49152 bytes)
[ 0.422928] PM: Registering ACPI NVS region at bf77a000 (28672 bytes)
[ 0.423053] PM: Registering ACPI NVS region at bf782000 (36864 bytes)
[ 0.423178] PM: Registering ACPI NVS region at bf78c000 (77824 bytes)
[ 0.423402] print_constraints: dummy:
[ 0.423561] NET: Registered protocol family 16
[ 0.423854] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.424072] ACPI: bus type pci registered
[ 0.424248] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.424471] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.424596] PCI: Using MMCONFIG for extended config space
[ 0.424719] PCI: Using configuration type 1 for base access
[ 0.426502] bio: create slab <bio-0> at 0
[ 0.426690] ACPI: Added _OSI(Linux)
[ 0.428009] ACPI: EC: EC description table is found, configuring boot EC
[ 0.431716] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via cmdline
[ 0.519290] ACPI: SSDT bf71a598 004F3 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.519824] ACPI: Dynamic OEM Table Load:
[ 0.520000] ACPI: SSDT (null) 004F3 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.520366] ACPI: SSDT bf718718 006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.520907] ACPI: Dynamic OEM Table Load:
[ 0.521082] ACPI: SSDT (null) 006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.526329] ACPI: SSDT bf719a98 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.526898] ACPI: Dynamic OEM Table Load:
[ 0.527079] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.530204] ACPI: SSDT bf717d98 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.530744] ACPI: Dynamic OEM Table Load:
[ 0.530921] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.535547] ACPI: Interpreter enabled
[ 0.535673] ACPI: (supports S0 S3 S4 S5)
[ 0.535913] ACPI: Using IOAPIC for interrupt routing
[ 0.541026] ACPI: Power Resource [PUBS] (on)
[ 0.544662] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.552848] ACPI: ACPI Dock Station Driver: 2 docks/bays found
[ 0.552976] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.553204] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
[ 0.553362] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[ 0.553384] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[ 0.553404] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[ 0.553421] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[ 0.553439] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[ 0.553456] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[ 0.553480] pci_bus 0000:ff: on NUMA node 0
[ 0.553486] pci0000:ff: Requesting ACPI _OSC control (0x1d)
[ 0.553613] Unable to assume _OSC PCIe control. Disabling ASPM
[ 0.553982] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.554153] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.554283] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.554409] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.554623] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.554835] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.555054] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.555267] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[ 0.555488] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[ 0.555517] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
[ 0.555538] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.555540] pci 0000:00:01.0: PME# disabled
[ 0.555584] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[ 0.555610] pci 0000:00:16.0: reg 10: [mem 0xf2427800-0xf242780f 64bit]
[ 0.555683] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.555688] pci 0000:00:16.0: PME# disabled
[ 0.555726] pci 0000:00:19.0: [8086:10ea] type 0 class 0x000200
[ 0.555750] pci 0000:00:19.0: reg 10: [mem 0xf2400000-0xf241ffff]
[ 0.555761] pci 0000:00:19.0: reg 14: [mem 0xf2425000-0xf2425fff]
[ 0.555772] pci 0000:00:19.0: reg 18: [io 0x1820-0x183f]
[ 0.555839] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.555843] pci 0000:00:19.0: PME# disabled
[ 0.555870] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 0.555894] pci 0000:00:1a.0: reg 10: [mem 0xf2428000-0xf24283ff]
[ 0.555980] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.555984] pci 0000:00:1a.0: PME# disabled
[ 0.556015] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 0.556036] pci 0000:00:1b.0: reg 10: [mem 0xf2420000-0xf2423fff 64bit]
[ 0.556110] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.556114] pci 0000:00:1b.0: PME# disabled
[ 0.556136] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 0.556210] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.556214] pci 0000:00:1c.0: PME# disabled
[ 0.556238] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[ 0.556314] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.556318] pci 0000:00:1c.1: PME# disabled
[ 0.556343] pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604
[ 0.556419] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.556423] pci 0000:00:1c.3: PME# disabled
[ 0.556447] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
[ 0.556521] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.556525] pci 0000:00:1c.4: PME# disabled
[ 0.556558] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 0.556582] pci 0000:00:1d.0: reg 10: [mem 0xf2428400-0xf24287ff]
[ 0.556668] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.556672] pci 0000:00:1d.0: PME# disabled
[ 0.556695] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.556767] pci 0000:00:1f.0: [8086:3b07] type 0 class 0x000601
[ 0.556880] pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106
[ 0.556905] pci 0000:00:1f.2: reg 10: [io 0x1818-0x181f]
[ 0.556916] pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f]
[ 0.556926] pci 0000:00:1f.2: reg 18: [io 0x1810-0x1817]
[ 0.556936] pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b]
[ 0.556946] pci 0000:00:1f.2: reg 20: [io 0x1840-0x185f]
[ 0.556957] pci 0000:00:1f.2: reg 24: [mem 0xf2427000-0xf24277ff]
[ 0.557005] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.557009] pci 0000:00:1f.2: PME# disabled
[ 0.557030] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 0.557050] pci 0000:00:1f.3: reg 10: [mem 0xf2428800-0xf24288ff 64bit]
[ 0.557079] pci 0000:00:1f.3: reg 20: [io 0x1860-0x187f]
[ 0.557122] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[ 0.557148] pci 0000:00:1f.6: reg 10: [mem 0xf2426000-0xf2426fff 64bit]
[ 0.557258] pci 0000:01:00.0: [10de:0a6c] type 0 class 0x000300
[ 0.557269] pci 0000:01:00.0: reg 10: [mem 0xcc000000-0xccffffff]
[ 0.557282] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.557294] pci 0000:01:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref]
[ 0.557302] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
[ 0.557311] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.557359] pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403
[ 0.557370] pci 0000:01:00.1: reg 10: [mem 0xcdefc000-0xcdefffff]
[ 0.557455] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.557554] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.557556] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xcdefffff]
[ 0.557559] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.557612] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.557712] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.557716] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.557723] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.557848] pci 0000:03:00.0: [8086:4238] type 0 class 0x000280
[ 0.557905] pci 0000:03:00.0: reg 10: [mem 0xf2000000-0xf2001fff 64bit]
[ 0.558100] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.558126] pci 0000:03:00.0: PME# disabled
[ 0.558192] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.558293] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
[ 0.558297] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf20fffff]
[ 0.558304] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.558358] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.558458] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.558462] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.558469] pci 0000:00:1c.3: bridge window [mem 0xf2500000-0xf25fffff 64bit pref]
[ 0.558592] pci 0000:0d:00.0: [1180:e822] type 0 class 0x000805
[ 0.558614] pci 0000:0d:00.0: reg 10: [mem 0xf2100000-0xf21000ff]
[ 0.558746] pci 0000:0d:00.0: supports D1 D2
[ 0.558747] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.558753] pci 0000:0d:00.0: PME# disabled
[ 0.558798] pci 0000:0d:00.1: [1180:e230] type 0 class 0x000880
[ 0.558820] pci 0000:0d:00.1: reg 10: [mem 0xf2100400-0xf21004ff]
[ 0.558952] pci 0000:0d:00.1: supports D1 D2
[ 0.558953] pci 0000:0d:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.558958] pci 0000:0d:00.1: PME# disabled
[ 0.559005] pci 0000:0d:00.3: [1180:e832] type 0 class 0x000c00
[ 0.559026] pci 0000:0d:00.3: reg 10: [mem 0xf2100800-0xf2100fff]
[ 0.559158] pci 0000:0d:00.3: supports D1 D2
[ 0.559160] pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.559165] pci 0000:0d:00.3: PME# disabled
[ 0.559230] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]
[ 0.559331] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.559336] pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff]
[ 0.559342] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.559412] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] (subtractive decode)
[ 0.559515] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.559520] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.559526] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.559528] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.559530] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.559531] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.559533] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.559534] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.559536] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.559537] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.559569] pci_bus 0000:00: on NUMA node 0
[ 0.559570] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.559647] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT]
[ 0.559668] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.559687] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.559707] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.559729] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
[ 0.559827] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.560056] Unable to assume _OSC PCIe control. Disabling ASPM
[ 0.562883] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.563273] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.563648] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.564149] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.564533] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.564915] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.565296] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.565792] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.566262] SCSI subsystem initialized
[ 0.566393] libata version 3.00 loaded.
[ 0.566427] usbcore: registered new interface driver usbfs
[ 0.566541] usbcore: registered new interface driver hub
[ 0.566659] usbcore: registered new device driver usb
[ 0.566848] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.566947] PCI: Using ACPI for IRQ routing
[ 0.567047] PCI: pci_cache_line_size set to 64 bytes
[ 0.567134] reserve RAM buffer: 000000000009dc00 - 000000000009ffff
[ 0.567136] reserve RAM buffer: 00000000bf27c000 - 00000000bfffffff
[ 0.567140] reserve RAM buffer: 00000000bf35f000 - 00000000bfffffff
[ 0.567145] reserve RAM buffer: 00000000bf46f000 - 00000000bfffffff
[ 0.567149] reserve RAM buffer: 00000000bf717000 - 00000000bfffffff
[ 0.567152] reserve RAM buffer: 00000000bf76b000 - 00000000bfffffff
[ 0.567155] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff
[ 0.567270] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.567585] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.569692] Switching to clocksource hpet
[ 0.569837] pnp: PnP ACPI init
[ 0.569935] ACPI: bus type pnp registered
[ 0.570024] Switched to NOHz mode on CPU #1
[ 0.570106] Switched to NOHz mode on CPU #2
[ 0.570109] Switched to NOHz mode on CPU #3
[ 0.570340] Switched to NOHz mode on CPU #0
[ 0.570908] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.570909] pnp 00:00: [mem 0x000c0000-0x000c3fff]
[ 0.570911] pnp 00:00: [mem 0x000c4000-0x000c7fff]
[ 0.570912] pnp 00:00: [mem 0x000c8000-0x000cbfff]
[ 0.570913] pnp 00:00: [mem 0x000cc000-0x000cffff]
[ 0.570914] pnp 00:00: [mem 0x000d0000-0x000d3fff]
[ 0.570916] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
[ 0.570917] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
[ 0.570918] pnp 00:00: [mem 0x000dc000-0x000dbfff disabled]
[ 0.570920] pnp 00:00: [mem 0x000e0000-0x000e3fff]
[ 0.570921] pnp 00:00: [mem 0x000e4000-0x000e7fff]
[ 0.570922] pnp 00:00: [mem 0x000e8000-0x000ebfff]
[ 0.570923] pnp 00:00: [mem 0x000ec000-0x000effff]
[ 0.570925] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.570926] pnp 00:00: [mem 0x00100000-0xbfffffff]
[ 0.570927] pnp 00:00: [mem 0xfec00000-0xfed3ffff]
[ 0.570928] pnp 00:00: [mem 0xfed4c000-0xffffffff]
[ 0.570992] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.571093] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.571194] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.571294] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.571393] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
[ 0.571494] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.571595] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.571695] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.571797] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.571917] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.572017] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.572118] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.572219] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.572319] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.572420] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.572429] pnp 00:01: [bus ff]
[ 0.572477] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.572489] pnp 00:02: [bus 00-fe]
[ 0.572491] pnp 00:02: [io 0x0cf8-0x0cff]
[ 0.572493] pnp 00:02: [io 0x0000-0x0cf7 window]
[ 0.572494] pnp 00:02: [io 0x0d00-0xffff window]
[ 0.572495] pnp 00:02: [mem 0x000a0000-0x000bffff window]
[ 0.572497] pnp 00:02: [mem 0x000c0000-0x000c3fff window]
[ 0.572498] pnp 00:02: [mem 0x000c4000-0x000c7fff window]
[ 0.572499] pnp 00:02: [mem 0x000c8000-0x000cbfff window]
[ 0.572501] pnp 00:02: [mem 0x000cc000-0x000cffff window]
[ 0.572502] pnp 00:02: [mem 0x000d0000-0x000d3fff window]
[ 0.572504] pnp 00:02: [mem 0x000d4000-0x000d7fff window]
[ 0.572506] pnp 00:02: [mem 0x000d8000-0x000dbfff window]
[ 0.572507] pnp 00:02: [mem 0x000dc000-0x000dffff window]
[ 0.572508] pnp 00:02: [mem 0x000e0000-0x000e3fff window]
[ 0.572510] pnp 00:02: [mem 0x000e4000-0x000e7fff window]
[ 0.572511] pnp 00:02: [mem 0x000e8000-0x000ebfff window]
[ 0.572512] pnp 00:02: [mem 0x000ec000-0x000effff window]
[ 0.572514] pnp 00:02: [mem 0xc0000000-0xfebfffff window]
[ 0.572515] pnp 00:02: [mem 0xfed40000-0xfed4bfff window]
[ 0.572560] pnp 00:02: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.572798] pnp 00:03: [io 0x0010-0x001f]
[ 0.572799] pnp 00:03: [io 0x0090-0x009f]
[ 0.572800] pnp 00:03: [io 0x0024-0x0025]
[ 0.572801] pnp 00:03: [io 0x0028-0x0029]
[ 0.572803] pnp 00:03: [io 0x002c-0x002d]
[ 0.572804] pnp 00:03: [io 0x0030-0x0031]
[ 0.572805] pnp 00:03: [io 0x0034-0x0035]
[ 0.572806] pnp 00:03: [io 0x0038-0x0039]
[ 0.572807] pnp 00:03: [io 0x003c-0x003d]
[ 0.572808] pnp 00:03: [io 0x00a4-0x00a5]
[ 0.572809] pnp 00:03: [io 0x00a8-0x00a9]
[ 0.572811] pnp 00:03: [io 0x00ac-0x00ad]
[ 0.572812] pnp 00:03: [io 0x00b0-0x00b5]
[ 0.572813] pnp 00:03: [io 0x00b8-0x00b9]
[ 0.572814] pnp 00:03: [io 0x00bc-0x00bd]
[ 0.572815] pnp 00:03: [io 0x0050-0x0053]
[ 0.572816] pnp 00:03: [io 0x0072-0x0077]
[ 0.572817] pnp 00:03: [io 0x164e-0x164f]
[ 0.572818] pnp 00:03: [io 0x002e-0x002f]
[ 0.572820] pnp 00:03: [io 0x1000-0x107f]
[ 0.572821] pnp 00:03: [io 0x1180-0x11ff]
[ 0.572822] pnp 00:03: [io 0x0800-0x080f]
[ 0.572823] pnp 00:03: [io 0x15e0-0x15ef]
[ 0.572824] pnp 00:03: [io 0x1600-0x1641]
[ 0.572841] pnp 00:03: [io 0x1644-0x167f]
[ 0.572842] pnp 00:03: [mem 0xe0000000-0xefffffff]
[ 0.572843] pnp 00:03: [mem 0xfeaff000-0xfeafffff]
[ 0.572845] pnp 00:03: [mem 0xfed1c000-0xfed1ffff]
[ 0.572846] pnp 00:03: [mem 0xfed10000-0xfed13fff]
[ 0.572847] pnp 00:03: [mem 0xfed18000-0xfed18fff]
[ 0.572848] pnp 00:03: [mem 0xfed19000-0xfed19fff]
[ 0.572850] pnp 00:03: [mem 0xfed45000-0xfed4bfff]
[ 0.572924] system 00:03: [io 0x164e-0x164f] has been reserved
[ 0.573024] system 00:03: [io 0x1000-0x107f] has been reserved
[ 0.573123] system 00:03: [io 0x1180-0x11ff] has been reserved
[ 0.573222] system 00:03: [io 0x0800-0x080f] has been reserved
[ 0.573320] system 00:03: [io 0x15e0-0x15ef] has been reserved
[ 0.573420] system 00:03: [io 0x1600-0x1641] has been reserved
[ 0.573519] system 00:03: [io 0x1644-0x167f] could not be reserved
[ 0.573618] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.573718] system 00:03: [mem 0xfeaff000-0xfeafffff] has been reserved
[ 0.573817] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.573931] system 00:03: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.574031] system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.574132] system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.574232] system 00:03: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.574333] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.574354] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.574392] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.574398] pnp 00:05: [io 0x0000-0x000f]
[ 0.574400] pnp 00:05: [io 0x0080-0x008f]
[ 0.574401] pnp 00:05: [io 0x00c0-0x00df]
[ 0.574402] pnp 00:05: [dma 4]
[ 0.574436] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.574441] pnp 00:06: [io 0x0061]
[ 0.574475] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.574480] pnp 00:07: [io 0x00f0]
[ 0.574486] pnp 00:07: [irq 13]
[ 0.574520] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.574526] pnp 00:08: [io 0x0070-0x0071]
[ 0.574531] pnp 00:08: [irq 8]
[ 0.574565] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.574571] pnp 00:09: [io 0x0060]
[ 0.574572] pnp 00:09: [io 0x0064]
[ 0.574576] pnp 00:09: [irq 1]
[ 0.574611] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.574619] pnp 00:0a: [irq 12]
[ 0.574654] pnp 00:0a: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[ 0.574921] pnp 00:0b: [mem 0xfed40000-0xfed44fff]
[ 0.574963] pnp 00:0b: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.575571] pnp: PnP ACPI: found 12 devices
[ 0.575668] ACPI: ACPI bus type pnp unregistered
[ 0.612461] pci 0000:01:00.0: BAR 6: assigned [mem 0xcd000000-0xcd07ffff pref]
[ 0.612626] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.612724] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.612831] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xcdefffff]
[ 0.612932] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.613099] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.613196] pci 0000:00:1c.0: bridge window [io disabled]
[ 0.613298] pci 0000:00:1c.0: bridge window [mem disabled]
[ 0.613398] pci 0000:00:1c.0: bridge window [mem pref disabled]
[ 0.613503] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.613600] pci 0000:00:1c.1: bridge window [io disabled]
[ 0.613702] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf20fffff]
[ 0.613811] pci 0000:00:1c.1: bridge window [mem pref disabled]
[ 0.613915] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.614016] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.614118] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.614220] pci 0000:00:1c.3: bridge window [mem 0xf2500000-0xf25fffff 64bit pref]
[ 0.614390] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]
[ 0.614487] pci 0000:00:1c.4: bridge window [io disabled]
[ 0.614589] pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff]
[ 0.614692] pci 0000:00:1c.4: bridge window [mem pref disabled]
[ 0.614802] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e]
[ 0.614899] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.615000] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.615101] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.615220] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.615320] pci 0000:00:01.0: setting latency timer to 64
[ 0.615326] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.615428] pci 0000:00:1c.0: setting latency timer to 64
[ 0.615436] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.615537] pci 0000:00:1c.1: setting latency timer to 64
[ 0.615545] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.615647] pci 0000:00:1c.3: setting latency timer to 64
[ 0.615653] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.615762] pci 0000:00:1c.4: setting latency timer to 64
[ 0.615769] pci 0000:00:1e.0: setting latency timer to 64
[ 0.615773] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.615774] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.615776] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.615777] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.615779] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.615781] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
[ 0.615782] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff]
[ 0.615784] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.615785] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xcdefffff]
[ 0.615787] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.615789] pci_bus 0000:03: resource 1 [mem 0xf2000000-0xf20fffff]
[ 0.615790] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
[ 0.615791] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
[ 0.615793] pci_bus 0000:05: resource 2 [mem 0xf2500000-0xf25fffff 64bit pref]
[ 0.615794] pci_bus 0000:0d: resource 1 [mem 0xf2100000-0xf21fffff]
[ 0.615796] pci_bus 0000:0e: resource 4 [io 0x0000-0x0cf7]
[ 0.615797] pci_bus 0000:0e: resource 5 [io 0x0d00-0xffff]
[ 0.615798] pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.615800] pci_bus 0000:0e: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.615801] pci_bus 0000:0e: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.615803] pci_bus 0000:0e: resource 9 [mem 0x000dc000-0x000dffff]
[ 0.615804] pci_bus 0000:0e: resource 10 [mem 0xc0000000-0xfebfffff]
[ 0.615820] NET: Registered protocol family 2
[ 0.615935] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.616086] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.616439] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.616634] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.616758] TCP reno registered
[ 0.616853] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.616953] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.617120] NET: Registered protocol family 1
[ 0.617235] Simple Boot Flag at 0x35 set to 0x1
[ 0.618517] highmem bounce pool size: 64 pages
[ 0.620887] msgmni has been set to 1626
[ 0.621278] alg: No test for stdrng (krng)
[ 0.621441] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.621608] io scheduler noop registered
[ 0.623442] io scheduler deadline registered
[ 0.623546] io scheduler cfq registered (default)
[ 0.623718] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.623738] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.624058] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.624156] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.624415] acpiphp: Slot [1] registered
[ 0.624555] intel_idle: MWAIT substates: 0x1120
[ 0.624557] intel_idle: v0.4 model 0x25
[ 0.624558] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.633070] acpi device:0c: registered as cooling_device0
[ 0.633280] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0b/LNXVIDEO:01/input/input0
[ 0.633452] ACPI: Video Device [VID1] (multi-head: yes rom: yes post: no)
[ 0.633616] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.698889] Non-volatile memory driver v1.3
[ 0.699021] Linux agpgart interface v0.103
[ 0.699146] [drm] Initialized drm 1.1.0 20060810
[ 0.699351] ahci 0000:00:1f.2: version 3.0
[ 0.699359] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.699490] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 0.699541] ahci: SSS flag set, parallel bus scan disabled
[ 0.699684] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
[ 0.699851] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 0.700021] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.706144] scsi0 : ahci
[ 0.706322] scsi1 : ahci
[ 0.706514] scsi2 : ahci
[ 0.706685] scsi3 : ahci
[ 0.706854] scsi4 : ahci
[ 0.707025] scsi5 : ahci
[ 0.707461] ata1: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427100 irq 41
[ 0.707656] ata2: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427180 irq 41
[ 0.707820] ata3: DUMMY
[ 0.707912] ata4: DUMMY
[ 0.708006] ata5: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427300 irq 41
[ 0.708171] ata6: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427380 irq 41
[ 0.708534] usbcore: registered new interface driver libusual
[ 0.708712] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.712864] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.712967] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.713165] mousedev: PS/2 mouse device common for all mice
[ 0.713391] rtc_cmos 00:08: RTC can wake from S4
[ 0.716372] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.722599] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.722741] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.722983] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 0.723545] cpuidle: using governor ladder
[ 0.724315] cpuidle: using governor menu
[ 0.725103] ALSA device list:
[ 0.725206] No soundcards found.
[ 0.725314] Netfilter messages via NETLINK v0.30.
[ 0.725422] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 0.725794] ctnetlink v0.93: registering with nfnetlink.
[ 0.726016] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.726175] TCP cubic registered
[ 0.726282] Initializing XFRM netlink socket
[ 0.726907] NET: Registered protocol family 10
[ 0.727143] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 0.727262] IPv6 over IPv4 tunneling driver
[ 0.727545] sit0: Features changed: 0x00007800 -> 0x00007000
[ 0.727722] NET: Registered protocol family 17
[ 0.727826] Using IPI No-Shortcut mode
[ 1.011868] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.013754] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.013762] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.013949] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.015884] ata1.00: ATA-8: ST9320423AS, 0003LVM1, max UDMA/100
[ 1.016002] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.018251] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.018259] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.018447] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.020354] ata1.00: configured for UDMA/100
[ 1.020772] scsi 0:0:0:0: Direct-Access ATA ST9320423AS 0003 PQ: 0 ANSI: 5
[ 1.021285] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.021565] sd 0:0:0:0: [sda] Write Protect is off
[ 1.021663] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.021684] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.022162] sda: detected capacity change from 0 to 320072933376
[ 1.084204] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 1.085162] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.325085] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.327970] ata2.00: ACPI cmd e3/00:10:00:00:00:a0 (IDLE) succeeded
[ 1.328718] ata2.00: ACPI cmd e3/00:03:00:00:00:a0 (IDLE) succeeded
[ 1.330510] ata2.00: ATAPI: MATSHITADVD-RAM UJ890, SB01, max UDMA/100
[ 1.334201] ata2.00: ACPI cmd e3/00:10:00:00:00:a0 (IDLE) succeeded
[ 1.335035] ata2.00: ACPI cmd e3/00:03:00:00:00:a0 (IDLE) succeeded
[ 1.336785] ata2.00: configured for UDMA/100
[ 1.340593] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ890 SB01 PQ: 0 ANSI: 5
[ 1.615345] Refined TSC clocksource calibration: 2659.999 MHz.
[ 1.615469] Switching to clocksource tsc
[ 1.645271] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.949503] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.003619] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 2.003822] VFS: Mounted root (ext4 filesystem) readonly on device 8:7.
[ 2.004021] Freeing unused kernel memory: 368k freed
[ 6.036044] udevd[4938]: starting version 171
[ 6.356019] wmi: Mapper loaded
[ 6.360195] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 6.360197] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 6.360199] thinkpad_acpi: ThinkPad BIOS 6MET83WW (1.43 ), EC 6MHT44WW-1.19
[ 6.360201] thinkpad_acpi: Lenovo ThinkPad T510, model 43495KG
[ 6.363916] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 6.364078] thinkpad_acpi: radio switch found; radios are enabled
[ 6.365331] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
[ 6.365811] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
[ 6.366245] Registered led device: tpacpi::thinklight
[ 6.366270] Registered led device: tpacpi::power
[ 6.366283] Registered led device: tpacpi::standby
[ 6.366299] Registered led device: tpacpi::thinkvantage
[ 6.366941] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.366963] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 6.366968] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 6.366979] ehci_hcd 0000:00:1a.0: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 6.367001] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 6.367005] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 6.367032] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 6.368321] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
[ 6.368375] thinkpad_acpi: Console audio control enabled, mode: override (read/write)
[ 6.369464] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input2
[ 6.371407] ehci_hcd 0000:00:1a.0: debug port 2
[ 6.375424] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xf2428000
[ 6.375747] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
[ 6.375749] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 6.380954] thermal LNXTHERM:00: registered as thermal_zone0
[ 6.380956] ACPI: Thermal Zone [THM0] (50 C)
[ 6.381161] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 6.381458] ACPI: AC Adapter [AC] (on-line)
[ 6.385281] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 6.385320] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.385324] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.385328] usb usb1: Product: EHCI Host Controller
[ 6.385332] usb usb1: Manufacturer: Linux 2.6.39-dezzy ehci_hcd
[ 6.385335] usb usb1: SerialNumber: 0000:00:1a.0
[ 6.385417] hub 1-0:1.0: USB hub found
[ 6.385421] hub 1-0:1.0: 3 ports detected
[ 6.385479] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 6.385483] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 6.385494] ehci_hcd 0000:00:1d.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 6.385510] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 6.385514] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 6.385519] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 6.391293] ehci_hcd 0000:00:1d.0: debug port 2
[ 6.396712] ehci_hcd 0000:00:1d.0: irq 19, io mem 0xf2428400
[ 6.401879] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 6.407224] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 6.407302] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.407304] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.407306] usb usb2: Product: EHCI Host Controller
[ 6.407307] usb usb2: Manufacturer: Linux 2.6.39-dezzy ehci_hcd
[ 6.407309] usb usb2: SerialNumber: 0000:00:1d.0
[ 6.407391] hub 2-0:1.0: USB hub found
[ 6.407395] hub 2-0:1.0: 3 ports detected
[ 6.407519] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 6.407528] e1000e 0000:00:19.0: setting latency timer to 64
[ 6.407788] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 6.414237] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 6.414242] ACPI: Battery Slot [BAT0] (battery present)
[ 6.423214] cfg80211: Calling CRDA to update world regulatory domain
[ 6.435358] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[ 6.435547] ACPI: Lid Switch [LID]
[ 6.435576] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
[ 6.435596] ACPI: Sleep Button [SLPB]
[ 6.435639] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 6.435657] ACPI: Power Button [PWRF]
[ 6.465627] ACPI: acpi_idle yielding to intel_idle
[ 6.471122] sdhci: Secure Digital Host Controller Interface driver
[ 6.471124] sdhci: Copyright(c) Pierre Ossman
[ 6.486307] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 1)
[ 6.486325] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.486349] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 6.486355] sdhci-pci 0000:0d:00.0: setting latency timer to 64
[ 6.486389] mmc0: no vmmc regulator found
[ 6.486408] Registered led device: mmc0::
[ 6.486437] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[ 6.528264] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.528271] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.528336] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 6.558923] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) f0:de:f1:0b:b4:e4
[ 6.558929] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 6.558983] e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
[ 6.559000] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 6.559013] intel ips 0000:00:1f.6: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 6.559122] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
[ 6.559172] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 6.559188] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 6.686527] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 6.778459] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6.778522] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 6.778574] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.800711] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 6.800713] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.800981] hub 1-1:1.0: USB hub found
[ 6.801041] hub 1-1:1.0: 6 ports detected
[ 6.869464] HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.869467] hda_intel: Disable MSI for Nvidia chipset
[ 6.869506] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 6.902987] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 7.017146] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 7.017152] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.017407] hub 2-1:1.0: USB hub found
[ 7.017553] hub 2-1:1.0: 8 ports detected
[ 7.047394] hda-codec: No codec parser is available
[ 7.050311] hda-codec: No codec parser is available
[ 7.053196] hda-codec: No codec parser is available
[ 7.056100] hda-codec: No codec parser is available
[ 7.070466] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[ 7.070470] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[ 7.070538] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.070601] iwlagn 0000:03:00.0: setting latency timer to 64
[ 7.070655] iwlagn 0000:03:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
[ 7.086912] iwlagn 0000:03:00.0: device EEPROM VER=0x436, CALIB=0x6
[ 7.086917] iwlagn 0000:03:00.0: Device SKU: 0Xb
[ 7.086920] iwlagn 0000:03:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7
[ 7.086947] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 7.087029] iwlagn 0000:03:00.0: irq 44 for MSI/MSI-X
[ 7.091710] usb 1-1.2: new low speed USB device number 3 using ehci_hcd
[ 7.181491] usb 1-1.2: New USB device found, idVendor=045e, idProduct=0040
[ 7.181497] usb 1-1.2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 7.181501] usb 1-1.2: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[ 7.181505] usb 1-1.2: Manufacturer: Microsoft
[ 7.244385] usb 1-1.3: new full speed USB device number 4 using ehci_hcd
[ 7.330240] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016
[ 7.330247] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.330252] usb 1-1.3: Product: Biometric Coprocessor
[ 7.330282] usb 1-1.3: Manufacturer: UPEK
[ 7.336191] nvidia: module license 'NVIDIA' taints kernel.
[ 7.336197] Disabling lock debugging due to kernel taint
[ 7.372630] iwlagn 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532
[ 7.372915] Registered led device: phy0-led
[ 7.374673] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 7.374768] iwlagn 0000:03:00.0: wlan0: Features changed: 0x00004800 -> 0x00004000
[ 7.403806] usb 1-1.6: new high speed USB device number 5 using ehci_hcd
[ 7.494200] usb 1-1.6: New USB device found, idVendor=17ef, idProduct=480f
[ 7.494207] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.494213] usb 1-1.6: Product: Integrated Camera
[ 7.494217] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 7.568516] usb 2-1.4: new high speed USB device number 3 using ehci_hcd
[ 7.657422] usb 2-1.4: New USB device found, idVendor=05c6, idProduct=9205
[ 7.657429] usb 2-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[ 7.657435] usb 2-1.4: Product: Qualcomm Gobi 2000
[ 7.657439] usb 2-1.4: Manufacturer: Qualcomm Incorporated
[ 7.732926] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input7
[ 7.732969] usb 2-1.5: new full speed USB device number 4 using ehci_hcd
[ 7.732993] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1a.0-1.2/input0
[ 7.733009] usbcore: registered new interface driver usbhid
[ 7.733010] usbhid: USB HID core driver
[ 7.823488] usb 2-1.5: New USB device found, idVendor=17ef, idProduct=1003
[ 7.823496] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.823501] usb 2-1.5: Product: Integrated Smart Card Reader
[ 7.823506] usb 2-1.5: Manufacturer: Lenovo
[ 7.969486] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 7.969494] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 7.969505] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.969516] nvidia 0000:01:00.0: setting latency timer to 64
[ 7.969678] NVRM: loading NVIDIA UNIX x86 Kernel Module 275.09.07 Wed Jun 8 15:42:20 PDT 2011
[ 8.098121] Linux video capture interface: v2.00
[ 8.106754] usbcore: registered new interface driver usbserial
[ 8.106760] usbserial: USB Serial Driver core
[ 8.315237] USB Serial support registered for Qualcomm USB modem
[ 8.315291] drivers/usb/serial/qcserial.c: qcprobe
[ 8.315296] drivers/usb/serial/qcserial.c: Num Interfaces = 4
[ 8.315301] drivers/usb/serial/qcserial.c: This Interface = 0
[ 8.315331] drivers/usb/serial/qcserial.c: qcprobe
[ 8.315335] drivers/usb/serial/qcserial.c: Num Interfaces = 4
[ 8.315340] drivers/usb/serial/qcserial.c: This Interface = 1
[ 8.315344] drivers/usb/serial/qcserial.c: Diagnostics Monitor found
[ 8.316279] qcserial 2-1.4:1.1: Qualcomm USB modem converter detected
[ 8.316346] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB0
[ 8.316363] drivers/usb/serial/qcserial.c: qcprobe
[ 8.316365] drivers/usb/serial/qcserial.c: Num Interfaces = 4
[ 8.316367] drivers/usb/serial/qcserial.c: This Interface = 2
[ 8.316369] drivers/usb/serial/qcserial.c: Modem port found
[ 8.318032] qcserial 2-1.4:1.2: Qualcomm USB modem converter detected
[ 8.318079] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB1
[ 8.318095] drivers/usb/serial/qcserial.c: qcprobe
[ 8.318097] drivers/usb/serial/qcserial.c: Num Interfaces = 4
[ 8.318098] drivers/usb/serial/qcserial.c: This Interface = 3
[ 8.318100] drivers/usb/serial/qcserial.c: NMEA GPS interface found
[ 8.318760] qcserial 2-1.4:1.3: Qualcomm USB modem converter detected
[ 8.318831] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB2
[ 8.318859] usbcore: registered new interface driver qcserial
[ 8.438537] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480f)
[ 8.440145] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input8
[ 8.440212] usbcore: registered new interface driver uvcvideo
[ 8.440218] USB Video Class driver (v1.0.0)
[ 9.375719] Bluetooth: Core ver 2.16
[ 9.375734] NET: Registered protocol family 31
[ 9.375736] Bluetooth: HCI device and connection manager initialized
[ 9.375737] Bluetooth: HCI socket layer initialized
[ 9.375738] Bluetooth: L2CAP socket layer initialized
[ 9.375856] Bluetooth: SCO socket layer initialized
[ 9.414519] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 9.414545] usbcore: registered new interface driver btusb
[ 9.457281] usbcore: registered new interface driver cdc_acm
[ 9.457285] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 9.512668] coretemp coretemp.0: TjMax is 105 C.
[ 9.512760] coretemp coretemp.2: TjMax is 105 C.
[ 9.624458] fuse init (API version 7.16)
[ 9.868594] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 10.405397] thinkpad_ec: thinkpad_ec 0.40 loaded.
[ 10.426408] tp_smapi 0.40 loading...
[ 10.426647] tp_smapi successfully loaded (smapi_port=0xb2).
[ 10.462702] tun: Universal TUN/TAP device driver, 1.6
[ 10.462704] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 10.486769] uhci_hcd: USB Universal Host Controller Interface driver
[ 10.526066] usbcore: registered new interface driver usblp
[ 10.591215] Initializing USB Mass Storage driver...
[ 10.591361] usbcore: registered new interface driver usb-storage
[ 10.591366] USB Mass Storage support registered.
[ 11.332481] EXT4-fs (sda7): re-mounted. Opts: nouser_xattr
[ 11.555857] REISERFS (device sda1): found reiserfs format "3.6" with standard journal
[ 11.555876] REISERFS (device sda1): using ordered data mode
[ 11.556281] REISERFS (device sda1): journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 11.556479] REISERFS (device sda1): checking transaction log (sda1)
[ 11.570301] REISERFS (device sda1): Using r5 hash to sort names
[ 11.598384] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: nouser_xattr
[ 11.674108] Adding 8787964k swap on /dev/sda8. Priority:64 extents:1 across:8787964k
[ 11.739603] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[ 11.747569] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[ 11.748971] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
[ 11.750268] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
[ 11.751505] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 11.901447] microcode: Microcode Update Driver: v2.00 removed.
[ 11.967499] ata1.00: configured for UDMA/100
[ 11.967507] ata1: EH complete
[ 14.452605] ------------[ cut here ]------------
[ 14.452617] WARNING: at kernel/printk.c:293 do_syslog+0x8f/0x500()
[ 14.452621] Hardware name: 43495KG
[ 14.452623] Attempt to access syslog with CAP_SYS_ADMIN but no CAP_SYSLOG (deprecated).
[ 14.452626] Modules linked in: usb_storage usbmon usblp uhci_hcd tun tp_smapi thinkpad_ec snd_seq_oss snd_seq_midi_event snd_seq_dummy snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_hrtimer snd_aloop sbs sbshc ohci_hcd msr mmc_block joydev fuse fan display coretemp cdc_acm btusb bluetooth acpi_cpufreq mperf uvcvideo qcserial usb_wwan usbserial videodev usbhid nvidia(P) iwlagn snd_hda_codec_conexant snd_hda_intel mac80211 snd_hda_codec sr_mod snd_hwdep sdhci_pci snd_pcm snd_timer sdhci processor button cfg80211 i2c_i801 cdrom pcspkr intel_ips battery snd_page_alloc ac thermal e1000e ehci_hcd thinkpad_acpi wmi mmc_core [last unloaded: microcode]
[ 14.452695] Pid: 6693, comm: syslog-ng Tainted: P 2.6.39-dezzy #1
[ 14.452698] Call Trace:
[ 14.452705] [<c10306dd>] warn_slowpath_common+0x6d/0xa0
[ 14.452710] [<c103170f>] ? do_syslog+0x8f/0x500
[ 14.452715] [<c103170f>] ? do_syslog+0x8f/0x500
[ 14.452719] [<c103078e>] warn_slowpath_fmt+0x2e/0x30
[ 14.452724] [<c103170f>] do_syslog+0x8f/0x500
[ 14.452731] [<c10b7436>] ? d_rehash+0x26/0x30
[ 14.452737] [<c10eac8d>] ? proc_lookup_de+0x8d/0xe0
[ 14.452743] [<c10eef5b>] kmsg_open+0x1b/0x20
[ 14.452749] [<c10e56c1>] proc_reg_open+0x81/0x130
[ 14.452753] [<c10eef40>] ? kmsg_release+0x20/0x20
[ 14.452758] [<c10eef20>] ? read_vmcore+0x2d0/0x2d0
[ 14.452764] [<c10a384b>] __dentry_open.isra.16+0x11b/0x2a0
[ 14.452769] [<c10a48c4>] nameidata_to_filp+0x54/0x70
[ 14.452774] [<c10e5640>] ? proc_alloc_inode+0x80/0x80
[ 14.452779] [<c10b148f>] do_last.isra.46+0x1ff/0x7a0
[ 14.452783] [<c10b1c7d>] path_openat+0x8d/0x320
[ 14.452788] [<c10e5590>] ? proc_destroy_inode+0x10/0x20
[ 14.452793] [<c10b1f3c>] do_filp_open+0x2c/0x80
[ 14.452799] [<c10bc993>] ? alloc_fd+0xa3/0xe0
[ 14.452804] [<c10ae895>] ? getname_flags+0xc5/0x100
[ 14.452808] [<c10a49c1>] do_sys_open+0xe1/0x1b0
[ 14.452813] [<c10a4ab9>] sys_open+0x29/0x40
[ 14.452819] [<c139d610>] sysenter_do_call+0x12/0x26
[ 14.452823] ---[ end trace 5b6ef4be634eb595 ]---
[ 18.693677] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.971254] smapi smapi: set_real_thresh: set start to 34 for bat=0
[ 20.174853] smapi smapi: set_real_thresh: set stop to 90 for bat=0
[ 23.685187] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 23.735903] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 23.736290] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 29.615053] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 30.818381] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 30.869011] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 30.869466] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 31.176690] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 36.764395] wlan0: authenticate with 00:24:fe:06:70:b7 (try 1)
[ 36.766459] wlan0: authenticated
[ 36.766676] wlan0: associate with 00:24:fe:06:70:b7 (try 1)
[ 36.772964] wlan0: RX AssocResp from 00:24:fe:06:70:b7 (capab=0x411 status=0 aid=2)
[ 36.772968] wlan0: associated
[ 36.776569] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 41.159311] nvidia 0000:01:00.0: irq 45 for MSI/MSI-X
[ 47.741640] wlan0: no IPv6 routers present
[ 3150.332462] tun0: Features changed: 0x00004800 -> 0x00004000
[47444.179398] ehci_hcd 0000:00:1d.0: remove, state 1
[47444.179409] usb usb2: USB disconnect, device number 1
[47444.179412] usb 2-1: USB disconnect, device number 2
[47444.179414] usb 2-1.4: USB disconnect, device number 3
[47444.179545] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
[47444.179554] drivers/usb/serial/qcserial.c: qc_release
[47444.179562] qcserial 2-1.4:1.1: device disconnected
[47444.179626] qcserial ttyUSB1: Qualcomm USB modem converter now disconnected from ttyUSB1
[47444.179634] drivers/usb/serial/qcserial.c: qc_release
[47444.179640] qcserial 2-1.4:1.2: device disconnected
[47444.179698] qcserial ttyUSB2: Qualcomm USB modem converter now disconnected from ttyUSB2
[47444.179704] drivers/usb/serial/qcserial.c: qc_release
[47444.179709] qcserial 2-1.4:1.3: device disconnected
[47444.179762] usb 2-1.5: USB disconnect, device number 4
[47444.188632] ehci_hcd 0000:00:1d.0: USB bus 2 deregistered
[47444.188718] ehci_hcd 0000:00:1d.0: PCI INT D disabled
[47444.188727] ehci_hcd 0000:00:1a.0: remove, state 1
[47444.188734] usb usb1: USB disconnect, device number 1
[47444.188736] usb 1-1: USB disconnect, device number 2
[47444.188738] usb 1-1.2: USB disconnect, device number 3
[47444.204772] usb 1-1.3: USB disconnect, device number 4
[47444.204856] usb 1-1.6: USB disconnect, device number 5
[47444.227598] ehci_hcd 0000:00:1a.0: USB bus 1 deregistered
[47444.227671] ehci_hcd 0000:00:1a.0: PCI INT D disabled
[47444.236819] sdhci-pci 0000:0d:00.0: PCI INT A disabled
[47444.452512] ata1.00: configured for UDMA/100
[47444.452518] ata1: EH complete
[47444.452604] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[47446.280548] PM: Syncing filesystems ... done.
[47447.126462] Freezing user space processes ... (elapsed 0.01 seconds) done.
[47447.137325] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[47447.148435] Suspending console(s) (use no_console_suspend to debug)
[47447.157335] sd 0:0:0:0: [sda] Stopping disk
[47447.158358] HDA Intel 0000:01:00.1: PCI INT A disabled
[47447.158463] ACPI handle has no context!
[47447.158493] HDA Intel 0000:00:1b.0: PCI INT B disabled
[47447.238771] e1000e 0000:00:19.0: PCI INT A disabled
[47447.542393] PM: suspend of devices complete after 394.773 msecs
[47447.553701] PM: late suspend of devices complete after 11.331 msecs
[47447.553896] ACPI: Preparing to enter system sleep state S3
[47447.603195] PM: Saving platform NVS memory
[47447.604439] Disabling non-boot CPUs ...
[47447.618503] CPU 1 is now offline
[47447.633474] CPU 2 is now offline
[47447.644191] CPU 3 is now offline
[47447.644464] Extended CMOS year: 2000
[47447.644702] ACPI: Low-level resume complete
[47447.644755] PM: Restoring platform NVS memory
[47447.645402] Extended CMOS year: 2000
[47447.645432] Enabling non-boot CPUs ...
[47447.647529] Booting Node 0 Processor 1 APIC 0x1
[47447.647532] smpboot cpu 1: start_ip = 99000
[47447.657855] Initializing CPU#1
[47447.738733] Switched to NOHz mode on CPU #1
[47447.754787] CPU1 is up
[47447.754850] Booting Node 0 Processor 2 APIC 0x4
[47447.754852] smpboot cpu 2: start_ip = 99000
[47447.765070] Initializing CPU#2
[47447.846445] Switched to NOHz mode on CPU #2
[47447.862512] CPU2 is up
[47447.862571] Booting Node 0 Processor 3 APIC 0x5
[47447.862572] smpboot cpu 3: start_ip = 99000
[47447.872790] Initializing CPU#3
[47447.954240] Switched to NOHz mode on CPU #3
[47447.970391] CPU3 is up
[47447.972166] ACPI: Waking up from system sleep state S3
[47448.035001] intel ips 0000:00:1f.6: MCP limit exceeded: Avg temp 20750, limit 9000
[47448.062098] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[47448.062203] pci 0000:00:1a.0: restoring config space at offset 0xf (was 0x400, writing 0x40a)
[47448.062220] pci 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xf2428000)
[47448.062227] pci 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
[47448.062364] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
[47448.062460] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x4010b)
[47448.062470] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[47448.062475] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xf210f210)
[47448.062479] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0)
[47448.062487] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[47448.062492] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[47448.062525] pci 0000:00:1d.0: restoring config space at offset 0xf (was 0x400, writing 0x40a)
[47448.062542] pci 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xf2428400)
[47448.062549] pci 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
[47448.062659] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[47448.062722] intel ips 0000:00:1f.6: restoring config space at offset 0xf (was 0x400, writing 0x40a)
[47448.062743] intel ips 0000:00:1f.6: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
[47448.062781] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x800010, writing 0x800000)
[47448.062785] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100007)
[47448.062822] HDA Intel 0000:01:00.1: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[47448.063059] pci 0000:0d:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[47448.063273] PM: early resume of devices complete after 1.304 msecs
[47448.063528] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[47448.063546] HDA Intel 0000:00:1b.0: setting latency timer to 64
[47448.063587] ahci 0000:00:1f.2: setting latency timer to 64
[47448.063693] HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[47448.063696] HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[47448.063713] HDA Intel 0000:01:00.1: setting latency timer to 64
[47448.063736] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[47448.063748] sd 0:0:0:0: [sda] Starting disk
[47448.064428] pci 0000:00:1e.0: setting latency timer to 64
[47448.369199] ata5: SATA link down (SStatus 0 SControl 300)
[47448.371213] ata6: SATA link down (SStatus 0 SControl 300)
[47448.373194] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[47448.377255] ata2.00: ACPI cmd e3/00:10:00:00:00:a0 (IDLE) succeeded
[47448.379534] ata2.00: ACPI cmd e3/00:03:00:00:00:a0 (IDLE) succeeded
[47448.390932] ata2.00: ACPI cmd e3/00:10:00:00:00:a0 (IDLE) succeeded
[47448.393211] ata2.00: ACPI cmd e3/00:03:00:00:00:a0 (IDLE) succeeded
[47448.396436] ata2.00: configured for UDMA/100
[47450.249527] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[47450.441251] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[47450.441258] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[47450.441263] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[47450.445136] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[47450.445143] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[47450.445148] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[47450.446789] ata1.00: configured for UDMA/100
[47450.446959] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[47450.551615] PM: resume of devices complete after 2494.429 msecs
[47450.551721] Restarting tasks ... done.
[47450.552236] video LNXVIDEO:01: Restoring backlight state
[47450.605811] cfg80211: Calling CRDA for country: EU
[47450.827059] ata1.00: configured for UDMA/100
[47450.827069] ata1: EH complete
[47451.041720] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[47451.041724] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[47451.041756] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[47451.041761] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[47451.041772] ehci_hcd 0000:00:1a.0: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[47451.041803] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[47451.041808] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[47451.041888] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[47451.045453] ehci_hcd 0000:00:1a.0: debug port 2
[47451.049483] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xf2428000
[47451.059387] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[47451.059428] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[47451.059431] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[47451.059433] usb usb1: Product: EHCI Host Controller
[47451.059435] usb usb1: Manufacturer: Linux 2.6.39-dezzy ehci_hcd
[47451.059437] usb usb1: SerialNumber: 0000:00:1a.0
[47451.059534] hub 1-0:1.0: USB hub found
[47451.059539] hub 1-0:1.0: 3 ports detected
[47451.059612] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[47451.059617] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[47451.059626] ehci_hcd 0000:00:1d.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[47451.059648] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[47451.059652] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[47451.059689] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[47451.064399] ehci_hcd 0000:00:1d.0: debug port 2
[47451.068399] ehci_hcd 0000:00:1d.0: irq 19, io mem 0xf2428400
[47451.078339] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[47451.078377] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[47451.078380] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[47451.078383] usb usb2: Product: EHCI Host Controller
[47451.078385] usb usb2: Manufacturer: Linux 2.6.39-dezzy ehci_hcd
[47451.078387] usb usb2: SerialNumber: 0000:00:1d.0
[47451.078481] hub 2-0:1.0: USB hub found
[47451.078485] hub 2-0:1.0: 3 ports detected
[47451.320095] sdhci: Secure Digital Host Controller Interface driver
[47451.320099] sdhci: Copyright(c) Pierre Ossman
[47451.332928] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 1)
[47451.332947] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[47451.332978] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[47451.332988] sdhci-pci 0000:0d:00.0: setting latency timer to 64
[47451.333019] mmc0: no vmmc regulator found
[47451.333054] Registered led device: mmc0::
[47451.333095] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[47451.360645] usb 1-1: new high speed USB device number 2 using ehci_hcd
[47451.474685] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[47451.474688] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[47451.474961] hub 1-1:1.0: USB hub found
[47451.475053] hub 1-1:1.0: 6 ports detected
[47451.577096] usb 2-1: new high speed USB device number 2 using ehci_hcd
[47451.632707] uhci_hcd: USB Universal Host Controller Interface driver
[47451.691143] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[47451.691147] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[47451.691424] hub 2-1:1.0: USB hub found
[47451.691510] hub 2-1:1.0: 8 ports detected
[47451.765722] usb 1-1.3: new full speed USB device number 3 using ehci_hcd
[47451.851615] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016
[47451.851619] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[47451.851622] usb 1-1.3: Product: Biometric Coprocessor
[47451.851624] usb 1-1.3: Manufacturer: UPEK
[47451.925060] usb 1-1.6: new high speed USB device number 4 using ehci_hcd
[47452.008596] usb 1-1.6: New USB device found, idVendor=17ef, idProduct=480f
[47452.008601] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[47452.008604] usb 1-1.6: Product: Integrated Camera
[47452.008606] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[47452.009381] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480f)
[47452.010548] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input9
[47452.083927] usb 2-1.4: new high speed USB device number 3 using ehci_hcd
[47452.170568] usb 2-1.4: config 1 has an invalid interface number: 1 but max is 0
[47452.170573] usb 2-1.4: config 1 has no interface number 0
[47452.172439] usb 2-1.4: New USB device found, idVendor=05c6, idProduct=9204
[47452.172443] usb 2-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[47452.172446] usb 2-1.4: Product: Qualcomm Gobi 2000
[47452.172448] usb 2-1.4: Manufacturer: Qualcomm Incorporated
[47452.173984] drivers/usb/serial/qcserial.c: qcprobe
[47452.173986] drivers/usb/serial/qcserial.c: Num Interfaces = 1
[47452.173988] drivers/usb/serial/qcserial.c: This Interface = 1
[47452.173990] drivers/usb/serial/qcserial.c: QDL port found
[47452.173994] qcserial 2-1.4:1.1: Qualcomm USB modem converter detected
[47452.174067] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB0
[47452.246507] usb 2-1.5: new full speed USB device number 4 using ehci_hcd
[47452.338900] usb 2-1.5: New USB device found, idVendor=17ef, idProduct=1003
[47452.338905] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[47452.338908] usb 2-1.5: Product: Integrated Smart Card Reader
[47452.338911] usb 2-1.5: Manufacturer: Lenovo
[47456.509328] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[47456.627068] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[47456.848069] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[47456.898812] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[47456.899095] ADDRCONF(NETDEV_UP): eth0: link is not ready
[47457.615043] usb 1-1.2: new low speed USB device number 5 using ehci_hcd
[47457.704942] usb 1-1.2: New USB device found, idVendor=045e, idProduct=0040
[47457.704946] usb 1-1.2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[47457.704949] usb 1-1.2: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[47457.704952] usb 1-1.2: Manufacturer: Microsoft
[47457.707469] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input10
[47457.707575] generic-usb 0003:045E:0040.0002: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1a.0-1.2/input0
[47461.382147] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[47462.716169] smapi smapi: set_real_thresh: set start to 34 for bat=0
[47462.919657] smapi smapi: set_real_thresh: set stop to 90 for bat=0
[47462.965879] ata1.00: configured for UDMA/100
[47462.965885] ata1: EH complete
[47463.087107] udevd[10791]: starting version 171
[47466.371779] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[47466.906134] usb 2-1.4: USB disconnect, device number 3
[47466.906246] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
[47466.906259] drivers/usb/serial/qcserial.c: qc_release
[47466.906268] qcserial 2-1.4:1.1: device disconnected
[47467.848272] usb 2-1.4: new high speed USB device number 5 using ehci_hcd
[47467.934802] usb 2-1.4: New USB device found, idVendor=05c6, idProduct=9205
[47467.934806] usb 2-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[47467.934809] usb 2-1.4: Product: Qualcomm Gobi 2000
[47467.934812] usb 2-1.4: Manufacturer: Qualcomm Incorporated
[47467.936720] drivers/usb/serial/qcserial.c: qcprobe
[47467.936722] drivers/usb/serial/qcserial.c: Num Interfaces = 4
[47467.936724] drivers/usb/serial/qcserial.c: This Interface = 0
[47467.936806] drivers/usb/serial/qcserial.c: qcprobe
[47467.936809] drivers/usb/serial/qcserial.c: Num Interfaces = 4
[47467.936811] drivers/usb/serial/qcserial.c: This Interface = 1
[47467.936813] drivers/usb/serial/qcserial.c: Diagnostics Monitor found
[47467.937196] qcserial 2-1.4:1.1: Qualcomm USB modem converter detected
[47467.937265] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB0
[47467.937304] drivers/usb/serial/qcserial.c: qcprobe
[47467.937306] drivers/usb/serial/qcserial.c: Num Interfaces = 4
[47467.937308] drivers/usb/serial/qcserial.c: This Interface = 2
[47467.937310] drivers/usb/serial/qcserial.c: Modem port found
[47467.938210] qcserial 2-1.4:1.2: Qualcomm USB modem converter detected
[47467.938275] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB1
[47467.938317] drivers/usb/serial/qcserial.c: qcprobe
[47467.938319] drivers/usb/serial/qcserial.c: Num Interfaces = 4
[47467.938321] drivers/usb/serial/qcserial.c: This Interface = 3
[47467.938323] drivers/usb/serial/qcserial.c: NMEA GPS interface found
[47467.938945] qcserial 2-1.4:1.3: Qualcomm USB modem converter detected
[47467.939007] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB2
[47470.222357] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[47470.409769] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[47470.460500] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[47470.460772] ADDRCONF(NETDEV_UP): eth0: link is not ready
[47470.589701] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[47472.770730] wlan0: authenticate with c0:c5:20:84:f5:29 (try 1)
[47472.803251] wlan0: authenticated
[47472.803324] wlan0: associate with c0:c5:20:84:f5:29 (try 1)
[47472.815194] wlan0: RX AssocResp from c0:c5:20:84:f5:29 (capab=0x431 status=0 aid=10)
[47472.815197] wlan0: associated
[47472.822334] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[47483.173998] wlan0: no IPv6 routers present
[51839.605663] wlan0: deauthenticating from c0:c5:20:84:f5:29 by local choice (reason=3)
[51839.626843] cfg80211: Calling CRDA to update world regulatory domain
[51839.736973] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[51839.948183] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[51839.998920] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[51839.999224] ADDRCONF(NETDEV_UP): eth0: link is not ready
[51840.306622] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[51840.431345] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[51840.617490] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[51840.668233] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[51840.668519] ADDRCONF(NETDEV_UP): eth0: link is not ready
[51840.800308] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[51884.940399] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[51885.140545] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[51885.192390] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[51885.193593] ADDRCONF(NETDEV_UP): eth0: link is not ready
[51885.314437] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[51886.334333] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[51886.540995] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[51886.592855] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[51886.594040] ADDRCONF(NETDEV_UP): eth0: link is not ready
[51887.459023] wlan0: authenticate with c0:c5:20:84:f5:29 (try 1)
[51887.646109] wlan0: authenticated
[51887.646767] wlan0: associate with c0:c5:20:84:f5:29 (try 1)
[51887.845604] wlan0: associate with c0:c5:20:84:f5:29 (try 2)
[51888.045105] wlan0: associate with c0:c5:20:84:f5:29 (try 3)
[51888.244598] wlan0: association with c0:c5:20:84:f5:29 timed out
[51900.767792] wlan0: authenticate with c0:c5:20:84:f5:29 (try 1)
[51900.966353] wlan0: authenticate with c0:c5:20:84:f5:29 (try 2)
[51901.165848] wlan0: authenticate with c0:c5:20:84:f5:29 (try 3)
[51901.365342] wlan0: authentication with c0:c5:20:84:f5:29 timed out
[51913.998968] wlan0: authenticate with 00:1f:41:a5:05:49 (try 1)
[51914.001212] wlan0: authenticated
[51914.001286] wlan0: associate with 00:1f:41:a5:05:49 (try 1)
[51914.004538] wlan0: RX AssocResp from 00:1f:41:a5:05:49 (capab=0x431 status=0 aid=3)
[51914.004541] wlan0: associated
[51914.023166] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[51924.679250] wlan0: no IPv6 routers present
[56042.481028] wlan0: deauthenticating from 00:1f:41:a5:05:49 by local choice (reason=3)
[56042.498237] cfg80211: Calling CRDA for country: 97
[56042.613643] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[56042.825574] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[56042.876384] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[56042.876692] ADDRCONF(NETDEV_UP): eth0: link is not ready
[56043.002482] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[56043.122850] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[56043.313328] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[56043.364058] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[56043.364340] ADDRCONF(NETDEV_UP): eth0: link is not ready
[56043.496256] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[56092.338941] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[56092.533602] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[56092.584353] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[56092.585717] ADDRCONF(NETDEV_UP): eth0: link is not ready
[56092.712774] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[56093.713992] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[56093.923336] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[56093.973803] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[56093.974105] ADDRCONF(NETDEV_UP): eth0: link is not ready
[56094.883472] wlan0: authenticate with c0:c5:20:84:f5:29 (try 1)
[56094.942554] wlan0: authenticated
[56094.942627] wlan0: associate with c0:c5:20:84:f5:29 (try 1)
[56094.957186] wlan0: RX AssocResp from c0:c5:20:84:f5:29 (capab=0x431 status=0 aid=2)
[56094.957190] wlan0: associated
[56094.972653] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[56105.457635] wlan0: no IPv6 routers present
[63674.179698] wlan0: deauthenticating from c0:c5:20:84:f5:29 by local choice (reason=3)
[63674.207752] cfg80211: Calling CRDA to update world regulatory domain
[63674.318900] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[63674.530097] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[63674.580819] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[63674.581097] ADDRCONF(NETDEV_UP): eth0: link is not ready
[63674.827619] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[63674.954434] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[63675.149529] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[63675.200258] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[63675.200564] ADDRCONF(NETDEV_UP): eth0: link is not ready
[63675.333372] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[63723.812431] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[63724.006666] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[63724.057394] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[63724.057698] ADDRCONF(NETDEV_UP): eth0: link is not ready
[63724.182490] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[63725.187013] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[63725.382166] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[63725.432895] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[63725.433193] ADDRCONF(NETDEV_UP): eth0: link is not ready
[63726.314378] wlan0: authenticate with c0:c5:20:84:f5:29 (try 1)
[63726.335979] wlan0: authenticated
[63726.336052] wlan0: associate with c0:c5:20:84:f5:29 (try 1)
[63726.401772] wlan0: RX AssocResp from c0:c5:20:84:f5:29 (capab=0x431 status=0 aid=4)
[63726.401776] wlan0: associated
[63726.404779] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[63736.843897] wlan0: no IPv6 routers present
[67475.777745] wlan0: deauthenticating from c0:c5:20:84:f5:29 by local choice (reason=3)
[67475.799421] cfg80211: Calling CRDA for country: EU
[67475.918490] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[67476.125757] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[67476.176477] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[67476.176749] ADDRCONF(NETDEV_UP): eth0: link is not ready
[67476.377340] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[67476.501041] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[67476.695298] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[67476.746040] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[67476.746311] ADDRCONF(NETDEV_UP): eth0: link is not ready
[67476.891078] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[67479.049145] wlan0: authenticate with c0:c5:20:84:f5:29 (try 1)
[67479.057369] wlan0: authenticated
[67479.057445] wlan0: associate with c0:c5:20:84:f5:29 (try 1)
[67479.066027] wlan0: RX AssocResp from c0:c5:20:84:f5:29 (capab=0x431 status=0 aid=2)
[67479.066030] wlan0: associated
[67479.068985] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[67489.172472] wlan0: no IPv6 routers present
[71732.646288] wlan0: deauthenticating from c0:c5:20:84:f5:29 by local choice (reason=3)
[71732.673385] cfg80211: Calling CRDA to update world regulatory domain
[71732.789807] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[71733.023662] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[71733.074390] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[71733.074697] ADDRCONF(NETDEV_UP): eth0: link is not ready
[71733.378630] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[71733.495012] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[71733.683982] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[71733.734712] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[71733.734996] ADDRCONF(NETDEV_UP): eth0: link is not ready
[71733.865343] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[71736.023031] wlan0: authenticate with c0:c5:20:84:f5:29 (try 1)
[71736.040330] wlan0: authenticated
[71736.040462] wlan0: associate with c0:c5:20:84:f5:29 (try 1)
[71736.045643] wlan0: RX AssocResp from c0:c5:20:84:f5:29 (capab=0x431 status=0 aid=2)
[71736.045647] wlan0: associated
[71736.058398] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[71746.776567] wlan0: no IPv6 routers present
[72955.669588] cfg80211: Calling CRDA for country: EU
[72959.085776] wlan0: authenticate with 00:1f:41:a5:05:c9 (try 1)
[72959.092405] wlan0: authenticated
[72959.092594] wlan0: associate with 00:1f:41:a5:05:c9 (try 1)
[72959.095894] wlan0: RX AssocResp from 00:1f:41:a5:05:c9 (capab=0x431 status=0 aid=1)
[72959.095901] wlan0: associated
[72983.164742] nvidia 0000:01:00.0: irq 45 for MSI/MSI-X
[73715.183495] nvidia 0000:01:00.0: irq 45 for MSI/MSI-X
[73762.692621] wlan0: deauthenticating from 00:1f:41:a5:05:c9 by local choice (reason=3)
[73762.717879] cfg80211: Calling CRDA to update world regulatory domain
[73762.832812] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[73763.073124] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[73763.123860] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[73763.124131] ADDRCONF(NETDEV_UP): eth0: link is not ready
[73763.337964] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[73763.453552] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[73763.639690] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[73763.690413] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[73763.690682] ADDRCONF(NETDEV_UP): eth0: link is not ready
[73763.844223] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[73766.033030] wlan0: authenticate with c0:c5:20:84:f5:29 (try 1)
[73766.035283] wlan0: authenticated
[73766.035368] wlan0: waiting for beacon from c0:c5:20:84:f5:29
[73766.061150] wlan0: beacon received
[73766.069332] wlan0: associate with c0:c5:20:84:f5:29 (try 1)
[73766.072473] wlan0: RX AssocResp from c0:c5:20:84:f5:29 (capab=0x431 status=0 aid=2)
[73766.072478] wlan0: associated
[73766.078258] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[73777.016525] wlan0: no IPv6 routers present
[76922.198066] ehci_hcd 0000:00:1d.0: remove, state 1
[76922.198078] usb usb2: USB disconnect, device number 1
[76922.198081] usb 2-1: USB disconnect, device number 2
[76922.198083] usb 2-1.4: USB disconnect, device number 5
[76922.198227] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
[76922.198238] drivers/usb/serial/qcserial.c: qc_release
[76922.198246] qcserial 2-1.4:1.1: device disconnected
[76922.198329] qcserial ttyUSB1: Qualcomm USB modem converter now disconnected from ttyUSB1
[76922.198336] drivers/usb/serial/qcserial.c: qc_release
[76922.198342] qcserial 2-1.4:1.2: device disconnected
[76922.198397] qcserial ttyUSB2: Qualcomm USB modem converter now disconnected from ttyUSB2
[76922.198402] drivers/usb/serial/qcserial.c: qc_release
[76922.198408] qcserial 2-1.4:1.3: device disconnected
[76922.198464] usb 2-1.5: USB disconnect, device number 4
[76922.207345] ehci_hcd 0000:00:1d.0: USB bus 2 deregistered
[76922.207438] ehci_hcd 0000:00:1d.0: PCI INT D disabled
[76922.207449] ehci_hcd 0000:00:1a.0: remove, state 1
[76922.207458] usb usb1: USB disconnect, device number 1
[76922.207460] usb 1-1: USB disconnect, device number 2
[76922.207463] usb 1-1.2: USB disconnect, device number 5
[76922.226481] usb 1-1.3: USB disconnect, device number 3
[76922.226575] usb 1-1.6: USB disconnect, device number 4
[76922.265190] ehci_hcd 0000:00:1a.0: USB bus 1 deregistered
[76922.265291] ehci_hcd 0000:00:1a.0: PCI INT D disabled
[76922.276958] sdhci-pci 0000:0d:00.0: PCI INT A disabled
[76922.587106] ata1.00: configured for UDMA/100
[76922.587113] ata1: EH complete
[76922.587208] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[76924.200691] PM: Syncing filesystems ... done.
[76935.389868] Freezing user space processes ... (elapsed 0.01 seconds) done.
[76935.400920] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[76935.412043] Suspending console(s) (use no_console_suspend to debug)
[76935.420424] sd 0:0:0:0: [sda] Stopping disk
[76935.421868] HDA Intel 0000:01:00.1: PCI INT A disabled
[76935.421961] ACPI handle has no context!
[76935.421975] HDA Intel 0000:00:1b.0: PCI INT B disabled
[76935.805031] PM: suspend of devices complete after 393.812 msecs
[76935.816464] PM: late suspend of devices complete after 11.456 msecs
[76935.816652] ACPI: Preparing to enter system sleep state S3
[76935.865841] PM: Saving platform NVS memory
[76935.867065] Disabling non-boot CPUs ...
[76935.881140] CPU 1 is now offline
[76935.898852] CPU 2 is now offline
[76935.908774] CPU 3 is now offline
[76935.909067] Extended CMOS year: 2000
[76935.909306] ACPI: Low-level resume complete
[76935.909358] PM: Restoring platform NVS memory
[76935.910002] Extended CMOS year: 2000
[76935.910018] Enabling non-boot CPUs ...
[76935.912130] Booting Node 0 Processor 1 APIC 0x1
[76935.912133] smpboot cpu 1: start_ip = 99000
[76935.922457] Initializing CPU#1
[76936.003314] Switched to NOHz mode on CPU #1
[76936.023384] CPU1 is up
[76936.023447] Booting Node 0 Processor 2 APIC 0x4
[76936.023448] smpboot cpu 2: start_ip = 99000
[76936.033665] Initializing CPU#2
[76936.115013] Switched to NOHz mode on CPU #2
[76936.135076] CPU2 is up
[76936.135134] Booting Node 0 Processor 3 APIC 0x5
[76936.135136] smpboot cpu 3: start_ip = 99000
[76936.145354] Initializing CPU#3
[76936.226798] Switched to NOHz mode on CPU #3
[76936.246949] CPU3 is up
[76936.248697] ACPI: Waking up from system sleep state S3
[76936.328665] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[76936.328771] pci 0000:00:1a.0: restoring config space at offset 0xf (was 0x400, writing 0x40a)
[76936.328788] pci 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xf2428000)
[76936.328795] pci 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
[76936.329023] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x4010b)
[76936.329033] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[76936.329038] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xf210f210)
[76936.329042] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0xf0)
[76936.329050] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[76936.329055] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[76936.329088] pci 0000:00:1d.0: restoring config space at offset 0xf (was 0x400, writing 0x40a)
[76936.329105] pci 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xf2428400)
[76936.329112] pci 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
[76936.329223] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[76936.329286] intel ips 0000:00:1f.6: restoring config space at offset 0xf (was 0x400, writing 0x40a)
[76936.329307] intel ips 0000:00:1f.6: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
[76936.329345] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x800010, writing 0x800000)
[76936.329349] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100007)
[76936.329387] HDA Intel 0000:01:00.1: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[76936.329470] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
[76936.329627] pci 0000:0d:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[76936.329839] PM: early resume of devices complete after 1.304 msecs
[76936.330095] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[76936.330102] pci 0000:00:1e.0: setting latency timer to 64
[76936.330114] HDA Intel 0000:00:1b.0: setting latency timer to 64
[76936.330145] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[76936.330154] ahci 0000:00:1f.2: setting latency timer to 64
[76936.330235] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[76936.330286] HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[76936.330290] HDA Intel 0000:01:00.1: setting latency timer to 64
[76936.330369] sd 0:0:0:0: [sda] Starting disk
[76936.633776] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[76936.848028] ata5: SATA link down (SStatus 0 SControl 300)
[76936.848075] ata6: SATA link down (SStatus 0 SControl 300)
[76936.848363] ata2.00: ACPI cmd e3/00:10:00:00:00:a0 (IDLE) succeeded
[76936.849150] ata2.00: ACPI cmd e3/00:03:00:00:00:a0 (IDLE) succeeded
[76936.854483] ata2.00: ACPI cmd e3/00:10:00:00:00:a0 (IDLE) succeeded
[76936.855165] ata2.00: ACPI cmd e3/00:03:00:00:00:a0 (IDLE) succeeded
[76936.856797] ata2.00: configured for UDMA/100
[76938.475143] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[76938.684846] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[76938.684853] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[76938.684859] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[76938.688687] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[76938.688694] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[76938.688700] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[76938.690343] ata1.00: configured for UDMA/100
[76938.690512] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[76938.796717] PM: resume of devices complete after 2472.959 msecs
[76938.796824] Restarting tasks ... done.
[76938.797697] video LNXVIDEO:01: Restoring backlight state
[76938.845148] cfg80211: Calling CRDA for country: 97
[76939.038530] ata1.00: configured for UDMA/100
[76939.038535] ata1: EH complete
[76939.298047] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[76939.298051] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[76939.298084] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[76939.298090] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[76939.298100] ehci_hcd 0000:00:1a.0: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[76939.298128] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[76939.298132] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[76939.298208] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[76939.303959] ehci_hcd 0000:00:1a.0: debug port 2
[76939.308931] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xf2428000
[76939.317896] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[76939.317938] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[76939.317940] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[76939.317943] usb usb1: Product: EHCI Host Controller
[76939.317945] usb usb1: Manufacturer: Linux 2.6.39-dezzy ehci_hcd
[76939.317947] usb usb1: SerialNumber: 0000:00:1a.0
[76939.318052] hub 1-0:1.0: USB hub found
[76939.318057] hub 1-0:1.0: 3 ports detected
[76939.318140] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[76939.318146] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[76939.318154] ehci_hcd 0000:00:1d.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[76939.318177] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[76939.318181] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[76939.318220] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[76939.323903] ehci_hcd 0000:00:1d.0: debug port 2
[76939.328870] ehci_hcd 0000:00:1d.0: irq 19, io mem 0xf2428400
[76939.337845] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[76939.337881] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[76939.337884] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[76939.337887] usb usb2: Product: EHCI Host Controller
[76939.337889] usb usb2: Manufacturer: Linux 2.6.39-dezzy ehci_hcd
[76939.337890] usb usb2: SerialNumber: 0000:00:1d.0
[76939.337982] hub 2-0:1.0: USB hub found
[76939.337986] hub 2-0:1.0: 3 ports detected
[76939.585979] sdhci: Secure Digital Host Controller Interface driver
[76939.585983] sdhci: Copyright(c) Pierre Ossman
[76939.610455] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 1)
[76939.610477] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[76939.610513] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[76939.610525] sdhci-pci 0000:0d:00.0: setting latency timer to 64
[76939.610570] mmc0: no vmmc regulator found
[76939.610604] Registered led device: mmc0::
[76939.610648] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[76939.619145] usb 1-1: new high speed USB device number 2 using ehci_hcd
[76939.733418] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[76939.733422] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[76939.733692] hub 1-1:1.0: USB hub found
[76939.733786] hub 1-1:1.0: 6 ports detected
[76939.836779] usb 2-1: new high speed USB device number 2 using ehci_hcd
[76939.950628] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[76939.950632] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[76939.950902] hub 2-1:1.0: USB hub found
[76939.950996] hub 2-1:1.0: 8 ports detected
[76939.966542] uhci_hcd: USB Universal Host Controller Interface driver
[76940.015366] usb 1-1.2: new low speed USB device number 3 using ehci_hcd
[76940.107507] usb 1-1.2: New USB device found, idVendor=045e, idProduct=0040
[76940.107511] usb 1-1.2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[76940.107514] usb 1-1.2: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[76940.107516] usb 1-1.2: Manufacturer: Microsoft
[76940.110300] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input11
[76940.110381] generic-usb 0003:045E:0040.0003: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1a.0-1.2/input0
[76940.183809] usb 1-1.3: new full speed USB device number 4 using ehci_hcd
[76940.269579] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016
[76940.269584] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[76940.269586] usb 1-1.3: Product: Biometric Coprocessor
[76940.269588] usb 1-1.3: Manufacturer: UPEK
[76940.320462] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[76940.342413] usb 1-1.6: new high speed USB device number 5 using ehci_hcd
[76940.372316] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[76940.373461] ADDRCONF(NETDEV_UP): eth0: link is not ready
[76940.438037] usb 1-1.6: New USB device found, idVendor=17ef, idProduct=480f
[76940.438041] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[76940.438044] usb 1-1.6: Product: Integrated Camera
[76940.438045] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[76940.438814] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480f)
[76940.440016] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input12
[76940.512992] usb 2-1.4: new high speed USB device number 3 using ehci_hcd
[76940.600136] usb 2-1.4: config 1 has an invalid interface number: 1 but max is 0
[76940.600140] usb 2-1.4: config 1 has no interface number 0
[76940.602000] usb 2-1.4: New USB device found, idVendor=05c6, idProduct=9204
[76940.602004] usb 2-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[76940.602006] usb 2-1.4: Product: Qualcomm Gobi 2000
[76940.602008] usb 2-1.4: Manufacturer: Qualcomm Incorporated
[76940.603545] drivers/usb/serial/qcserial.c: qcprobe
[76940.603548] drivers/usb/serial/qcserial.c: Num Interfaces = 1
[76940.603550] drivers/usb/serial/qcserial.c: This Interface = 1
[76940.603552] drivers/usb/serial/qcserial.c: QDL port found
[76940.603556] qcserial 2-1.4:1.1: Qualcomm USB modem converter detected
[76940.603637] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB0
[76940.676579] usb 2-1.5: new full speed USB device number 4 using ehci_hcd
[76940.766959] usb 2-1.5: New USB device found, idVendor=17ef, idProduct=1003
[76940.766965] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[76940.766968] usb 2-1.5: Product: Integrated Smart Card Reader
[76940.766971] usb 2-1.5: Manufacturer: Lenovo
[76951.095076] smapi smapi: set_real_thresh: set start to 34 for bat=0
[76951.298559] smapi smapi: set_real_thresh: set stop to 90 for bat=0
[76951.432821] ata1.00: configured for UDMA/100
[76951.432828] ata1: EH complete
[76951.539417] udevd[27831]: starting version 171
[76955.166621] usb 2-1.4: USB disconnect, device number 3
[76955.166749] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
[76955.166760] drivers/usb/serial/qcserial.c: qc_release
[76955.166770] qcserial 2-1.4:1.1: device disconnected
[76956.364882] usb 2-1.4: new high speed USB device number 5 using ehci_hcd
[76956.451649] usb 2-1.4: New USB device found, idVendor=05c6, idProduct=9205
[76956.451655] usb 2-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[76956.451658] usb 2-1.4: Product: Qualcomm Gobi 2000
[76956.451660] usb 2-1.4: Manufacturer: Qualcomm Incorporated
[76956.453444] drivers/usb/serial/qcserial.c: qcprobe
[76956.453447] drivers/usb/serial/qcserial.c: Num Interfaces = 4
[76956.453449] drivers/usb/serial/qcserial.c: This Interface = 0
[76956.453537] drivers/usb/serial/qcserial.c: qcprobe
[76956.453539] drivers/usb/serial/qcserial.c: Num Interfaces = 4
[76956.453541] drivers/usb/serial/qcserial.c: This Interface = 1
[76956.453543] drivers/usb/serial/qcserial.c: Diagnostics Monitor found
[76956.454045] qcserial 2-1.4:1.1: Qualcomm USB modem converter detected
[76956.454124] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB0
[76956.454167] drivers/usb/serial/qcserial.c: qcprobe
[76956.454169] drivers/usb/serial/qcserial.c: Num Interfaces = 4
[76956.454171] drivers/usb/serial/qcserial.c: This Interface = 2
[76956.454173] drivers/usb/serial/qcserial.c: Modem port found
[76956.454933] qcserial 2-1.4:1.2: Qualcomm USB modem converter detected
[76956.454999] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB1
[76956.455043] drivers/usb/serial/qcserial.c: qcprobe
[76956.455045] drivers/usb/serial/qcserial.c: Num Interfaces = 4
[76956.455047] drivers/usb/serial/qcserial.c: This Interface = 3
[76956.455050] drivers/usb/serial/qcserial.c: NMEA GPS interface found
[76956.455540] qcserial 2-1.4:1.3: Qualcomm USB modem converter detected
[76956.455605] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB2
[77206.484909] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[77265.005601] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[77265.242588] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[77265.294446] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[77265.295595] ADDRCONF(NETDEV_UP): eth0: link is not ready
[77265.416383] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[77267.603275] wlan0: authenticate with 00:24:fe:06:70:b7 (try 1)
[77267.605288] wlan0: authenticated
[77267.605372] wlan0: associate with 00:24:fe:06:70:b7 (try 1)
[77267.612073] wlan0: RX AssocResp from 00:24:fe:06:70:b7 (capab=0x411 status=0 aid=2)
[77267.612077] wlan0: associated
[77267.616291] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[77278.541773] wlan0: no IPv6 routers present
[-- Attachment #3: lspci-vv.txt --]
[-- Type: text/plain, Size: 15411 bytes --]
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
Subsystem: Lenovo Device 2193
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: cc000000-cdefffff
Prefetchable memory behind bridge: 00000000ce000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
Subsystem: Lenovo Device 215f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f2427800 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:19.0 Ethernet controller: Intel Corporation 82577LM Gigabit Network Connection (rev 06)
Subsystem: Lenovo Device 2153
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f2400000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f2425000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 1820 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) (prog-if 20 [EHCI])
Subsystem: Lenovo Device 2163
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at f2428000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
Subsystem: Lenovo Device 215e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 43
Region 0: Memory at f2420000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f2000000-f20fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f0000000-f1ffffff
Prefetchable memory behind bridge: 00000000f2500000-00000000f25fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
Memory behind bridge: f2100000-f21fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) (prog-if 20 [EHCI])
Subsystem: Lenovo Device 2163
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at f2428400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=0e, subordinate=0e, sec-latency=0
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06)
Subsystem: Lenovo Device 2166
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Device 2168
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 41
Region 0: I/O ports at 1818 [size=8]
Region 1: I/O ports at 180c [size=4]
Region 2: I/O ports at 1810 [size=8]
Region 3: I/O ports at 1808 [size=4]
Region 4: I/O ports at 1840 [size=32]
Region 5: Memory at f2427000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
Subsystem: Lenovo Device 2167
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f2428800 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06)
Subsystem: Lenovo Device 2190
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 19
Region 0: Memory at f2426000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel ips
Kernel modules: intel_ips
01:00.0 VGA compatible controller: nVidia Corporation GT218 [NVS 3100M] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device 215c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at cc000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at ce000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at 2000 [size=128]
[virtual] Expansion ROM at cd000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia, nouveau
01:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1)
Subsystem: Lenovo Device 218f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at cdefc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
03:00.0 Network controller: Intel Corporation Centrino Ultimate-N 6300 (rev 35)
Subsystem: Intel Corporation Centrino Ultimate-N 6300 3x3 AGN
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn
Kernel modules: iwlagn
0d:00.0 SD Host controller: Ricoh Co Ltd MMC/SD Host Controller (rev 01)
Subsystem: Lenovo Device 2133
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f2100000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci-pci
0d:00.1 System peripheral: Ricoh Co Ltd Memory Stick Host Controller (rev 01)
Subsystem: Lenovo Device 2134
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 10
Region 0: Memory at f2100400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
0d:00.3 FireWire (IEEE 1394): Ricoh Co Ltd FireWire Host Controller (rev 01) (prog-if 10 [OHCI])
Subsystem: Lenovo Device 2136
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 10
Region 0: Memory at f2100800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
Subsystem: Lenovo Device 2196
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
Subsystem: Lenovo Device 2196
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
Subsystem: Lenovo Device 2196
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
Subsystem: Lenovo Device 2196
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
Subsystem: Lenovo Device 2196
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
Subsystem: Lenovo Device 2196
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
[-- Attachment #4: interrupts.txt --]
[-- Type: text/plain, Size: 1989 bytes --]
CPU0 CPU1 CPU2 CPU3
0: 297 35 49 45 IO-APIC-edge timer
1: 29289 2760 2831 2778 IO-APIC-edge i8042
8: 25 20 22 23 IO-APIC-edge rtc0
9: 958099 201301 201355 201264 IO-APIC-fasteoi acpi
12: 6 1 1 1 IO-APIC-edge i8042
16: 15 12 18 15 IO-APIC-fasteoi hda_intel, mmc0
19: 10086 26 35 23 IO-APIC-fasteoi ips, ehci_hcd:usb2
23: 46823 79863 55579 50414 IO-APIC-fasteoi ehci_hcd:usb1
41: 481244 71758 71708 71786 PCI-MSI-edge ahci
42: 945 2740 1873 1634 PCI-MSI-edge eth0
43: 88306 280938 139215 104281 PCI-MSI-edge hda_intel
44: 2112521 420940 422471 421806 PCI-MSI-edge iwlagn
45: 24023 64165 51583 33809 PCI-MSI-edge nvidia
NMI: 0 0 0 0 Non-maskable interrupts
LOC: 97096018 94894657 100359537 99741220 Local timer interrupts
SPU: 0 0 0 0 Spurious interrupts
PMI: 0 0 0 0 Performance monitoring interrupts
IWI: 0 0 0 0 IRQ work interrupts
RES: 2224790 3732132 1161795 1021567 Rescheduling interrupts
CAL: 2032239 1512187 1121241 1016947 Function call interrupts
TLB: 40624 45485 42765 42159 TLB shootdowns
TRM: 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 Machine check exceptions
MCP: 312 311 311 311 Machine check polls
ERR: 0
MIS: 0
[-- Attachment #5: modules.txt --]
[-- Type: text/plain, Size: 2637 bytes --]
uhci_hcd 19256 0 - Live 0xf8512000
sdhci_pci 6703 0 - Live 0xf84d8000
sdhci 14975 1 sdhci_pci, Live 0xf84cc000
mmc_block 8037 0 - Live 0xf845f000
mmc_core 57109 2 sdhci,mmc_block, Live 0xf84aa000
ehci_hcd 34479 0 - Live 0xf8470000
usb_storage 28135 0 - Live 0xfa508000
usbmon 15729 0 - Live 0xfa4f0000
usblp 9095 0 - Live 0xfa4e0000
tun 12472 0 - Live 0xfa4bc000
tp_smapi 15504 0 - Live 0xfa4ab000
thinkpad_ec 3995 1 tp_smapi, Live 0xfa497000
snd_seq_oss 23584 0 - Live 0xfa485000
snd_seq_midi_event 4368 1 snd_seq_oss, Live 0xfa473000
snd_seq_dummy 983 0 - Live 0xfa469000
snd_seq 39328 5 snd_seq_oss,snd_seq_midi_event,snd_seq_dummy, Live 0xfa453000
snd_seq_device 4172 3 snd_seq_oss,snd_seq_dummy,snd_seq, Live 0xfa43b000
snd_pcm_oss 33152 0 - Live 0xfa427000
snd_mixer_oss 12248 1 snd_pcm_oss, Live 0xfa412000
snd_hrtimer 1200 0 - Live 0xfa405000
snd_aloop 11092 0 - Live 0xfa3f8000
sbs 8805 0 - Live 0xfa3e9000
sbshc 2664 1 sbs, Live 0xfa3dd000
ohci_hcd 19178 0 - Live 0xfa3ce000
msr 2016 0 - Live 0xfa3bf000
joydev 7407 0 - Live 0xfa3a6000
fuse 57109 3 - Live 0xfa389000
fan 1790 0 - Live 0xfa36d000
display 2167 0 - Live 0xfa363000
coretemp 4222 0 - Live 0xfa358000
cdc_acm 13553 0 - Live 0xfa349000
btusb 9681 0 - Live 0xfa337000
bluetooth 112005 1 btusb, Live 0xfa30a000
acpi_cpufreq 4869 1 - Live 0xfa2db000
mperf 883 1 acpi_cpufreq, Live 0xfa2d0000
uvcvideo 54357 0 - Live 0xfa2b8000
qcserial 3338 0 - Live 0xfa28f000
usb_wwan 7590 1 qcserial, Live 0xfa263000
usbserial 23879 2 qcserial,usb_wwan, Live 0xfa20f000
videodev 68079 1 uvcvideo, Live 0xfa1c6000
usbhid 22087 0 - Live 0xfa13b000
nvidia 10504894 85 - Live 0xf956d000 (P)
iwlagn 325564 0 - Live 0xf897e000
snd_hda_codec_conexant 33612 1 - Live 0xf88cd000
snd_hda_intel 18465 4 - Live 0xf889e000
mac80211 159579 1 iwlagn, Live 0xf8802000
snd_hda_codec 47828 2 snd_hda_codec_conexant,snd_hda_intel, Live 0xf885e000
sr_mod 12380 0 - Live 0xf87c0000
snd_hwdep 4447 1 snd_hda_codec, Live 0xf87ab000
snd_pcm 57369 5 snd_pcm_oss,snd_aloop,snd_hda_intel,snd_hda_codec, Live 0xf8778000
snd_timer 14975 4 snd_seq,snd_hrtimer,snd_pcm, Live 0xf8744000
processor 20996 1 acpi_cpufreq, Live 0xf8686000
button 3470 0 - Live 0xf8650000
cfg80211 124594 2 iwlagn,mac80211, Live 0xf860d000
i2c_i801 6235 0 - Live 0xf863d000
cdrom 30607 1 sr_mod, Live 0xf85ac000
pcspkr 1327 0 - Live 0xf8599000
intel_ips 9392 0 - Live 0xf858d000
battery 8529 0 - Live 0xf857f000
snd_page_alloc 5757 2 snd_hda_intel,snd_pcm, Live 0xf856e000
ac 2393 0 - Live 0xf8557000
thermal 6355 0 - Live 0xf854b000
e1000e 123512 0 - Live 0xf84dd000
thinkpad_acpi 52675 0 - Live 0xf849b000
wmi 6927 0 - Live 0xf8449000
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [REGRESSION] suspend/resume broken on T510
2011-06-30 22:07 ` Rafael J. Wysocki
2011-06-30 22:34 ` Marc Koschewski
@ 2011-06-30 22:53 ` Marc Koschewski
1 sibling, 0 replies; 5+ messages in thread
From: Marc Koschewski @ 2011-06-30 22:53 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: linux-kernel, Linux PM mailing list
* Rafael J. Wysocki <rjw@sisk.pl> [2011-07-01 00:07:27 +0200]:
Hi,
here's the bug: https://bugzilla.kernel.org/show_bug.cgi?id=38582
> Hi,
>
> On Friday, July 01, 2011, Marc Koschewski wrote:
> > Hi guys,
> >
> > I just thought to wait some what longer than -rc3 to report: suspend/resume is
> > broken in the current git. I blacklisted the 'mei' module so the suspend worked
> > as of rc4 (last 'first tested and working' version) with knowledge of the
> > mei-bug.
> >
> > However, my system does not resume anymore on my T510. After suspend the 'moon'
> > turns on as usual on 3.0.0-git and the box sleeps. After opening the lid it somehow
> > wakes up but doesn't boot/resume. It just stalls after some HDD activity.
> >
> > If have no idea what it could be - and I unfortunately cannot bisect it down to
> > anything > 2.6.39. I left out rc1 and rc2 this time due to having no time to
> > experiment this month. However, my .config is attached if anyone needs it...
>
> Well, perhaps let us know the hardware configuration (attach dmesg?).
>
> Anyway, I'm not sure if there's anyone who can figure out what _may_ be wrong
> on the basis of your description alone. It would be good if you could file
> a bug in http://bugzilla.kernel.org and let me know its number.
>
> Thanks,
> Rafael
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
>
--
Marc Koschewski
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [REGRESSION] suspend/resume broken on T510
2011-06-30 22:34 ` Marc Koschewski
@ 2011-07-01 19:40 ` Rafael J. Wysocki
0 siblings, 0 replies; 5+ messages in thread
From: Rafael J. Wysocki @ 2011-07-01 19:40 UTC (permalink / raw)
To: Marc Koschewski; +Cc: linux-kernel, Linux PM mailing list
On Friday, July 01, 2011, Marc Koschewski wrote:
> * Rafael J. Wysocki <rjw@sisk.pl> [2011-07-01 00:07:27 +0200]:
>
> Hi Rafael,
>
> I have attached some files here to let you know what machine won't resume.
I saw them, thanks.
Still, it's a bit difficult to figure out what's wrong.
Rafael
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2011-07-01 19:39 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-06-30 22:00 [REGRESSION] suspend/resume broken on T510 Marc Koschewski
2011-06-30 22:07 ` Rafael J. Wysocki
2011-06-30 22:34 ` Marc Koschewski
2011-07-01 19:40 ` Rafael J. Wysocki
2011-06-30 22:53 ` Marc Koschewski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox