From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: lrg@ti.com, alsa-devel@alsa-project.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] ASoC: wm8731: set the ACTIVE bit if bias ON entered
Date: Mon, 4 Jul 2011 10:29:00 -0700 [thread overview]
Message-ID: <20110704172856.GF28726@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <4E118BF6.6010205@atmel.com>
On Mon, Jul 04, 2011 at 11:46:30AM +0200, Nicolas Ferre wrote:
> Ah, ok... but I fear that I do not know the whole system enough for this
> addition ;-(
> Do you think you can code this modification, I will be happy to test it,
> if you want...
It's pretty trivial - try the below (Liam, are you OK with this if it
tests OK?):
>From 1dd054eb530641dadbf71525ee517c847f19e161 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Mon, 4 Jul 2011 10:27:51 -0700
Subject: [PATCH] ASoC: Manage WM8731 ACTIVE bit as a supply widget
Now we have supply widgets there's no need to open code the handling of
the ACTIVE bit.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
sound/soc/codecs/wm8731.c | 29 +++--------------------------
1 files changed, 3 insertions(+), 26 deletions(-)
diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index 2dc964b..59d9e59 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -175,6 +175,7 @@ static const struct snd_kcontrol_new wm8731_input_mux_controls =
SOC_DAPM_ENUM("Input Select", wm8731_insel_enum);
static const struct snd_soc_dapm_widget wm8731_dapm_widgets[] = {
+SND_SOC_DAPM_SUPPLY("Active",WM8731_ACTIVE, 0, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("OSC", WM8731_PWR, 5, 1, NULL, 0),
SND_SOC_DAPM_MIXER("Output Mixer", WM8731_PWR, 4, 1,
&wm8731_output_mixer_controls[0],
@@ -204,6 +205,8 @@ static int wm8731_check_osc(struct snd_soc_dapm_widget *source,
static const struct snd_soc_dapm_route wm8731_intercon[] = {
{"DAC", NULL, "OSC", wm8731_check_osc},
{"ADC", NULL, "OSC", wm8731_check_osc},
+ {"DAC", NULL, "ACTIVE"},
+ {"ADC", NULL, "ACTIVE"},
/* output mixer */
{"Output Mixer", "Line Bypass Switch", "Line Input"},
@@ -315,29 +318,6 @@ static int wm8731_hw_params(struct snd_pcm_substream *substream,
return 0;
}
-static int wm8731_pcm_prepare(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct snd_soc_codec *codec = dai->codec;
-
- /* set active */
- snd_soc_write(codec, WM8731_ACTIVE, 0x0001);
-
- return 0;
-}
-
-static void wm8731_shutdown(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct snd_soc_codec *codec = dai->codec;
-
- /* deactivate */
- if (!codec->active) {
- udelay(50);
- snd_soc_write(codec, WM8731_ACTIVE, 0x0);
- }
-}
-
static int wm8731_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
@@ -480,7 +460,6 @@ static int wm8731_set_bias_level(struct snd_soc_codec *codec,
snd_soc_write(codec, WM8731_PWR, reg | 0x0040);
break;
case SND_SOC_BIAS_OFF:
- snd_soc_write(codec, WM8731_ACTIVE, 0x0);
snd_soc_write(codec, WM8731_PWR, 0xffff);
regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies),
wm8731->supplies);
@@ -496,9 +475,7 @@ static int wm8731_set_bias_level(struct snd_soc_codec *codec,
SNDRV_PCM_FMTBIT_S24_LE)
static struct snd_soc_dai_ops wm8731_dai_ops = {
- .prepare = wm8731_pcm_prepare,
.hw_params = wm8731_hw_params,
- .shutdown = wm8731_shutdown,
.digital_mute = wm8731_mute,
.set_sysclk = wm8731_set_dai_sysclk,
.set_fmt = wm8731_set_dai_fmt,
--
1.7.5.4
next prev parent reply other threads:[~2011-07-04 17:29 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-29 18:00 use dmaengine for atmel ssc/pcm dai drivers Nicolas Ferre
2011-06-29 18:00 ` [PATCH 1/5] ASoC: wm8731: rework power management Nicolas Ferre
2011-06-29 17:11 ` Mark Brown
2011-06-30 13:57 ` Nicolas Ferre
2011-06-30 15:04 ` [alsa-devel] " Nicolas Ferre
2011-06-30 15:22 ` Mark Brown
2011-07-01 9:31 ` Nicolas Ferre
2011-06-29 18:00 ` [PATCH 2/5] ASoC: atmel-ssc: add phybase in device structure Nicolas Ferre
2011-06-29 17:48 ` Mark Brown
2011-07-01 14:46 ` [PATCH V2 " Nicolas Ferre
2011-06-29 18:00 ` [PATCH 3/5] ASoC: atmel-ssc: dmaengine usage switch depending on cpu Nicolas Ferre
2011-06-29 18:00 ` [PATCH 4/5] ASoC: atmel_ssc_dai/atmel-pcm: adapt to dmaengine usage Nicolas Ferre
2011-06-29 17:59 ` Mark Brown
2011-06-30 0:54 ` Koul, Vinod
2011-06-29 18:00 ` [PATCH 5/5] ASoC: atmel_ssc_dai: PM: actually stopping clock on suspend/resume Nicolas Ferre
2011-07-01 10:43 ` [PATCH] ASoC: wm8731: set the ACTIVE bit if bias ON entered Nicolas Ferre
2011-07-01 14:18 ` Liam Girdwood
2011-07-01 16:15 ` Mark Brown
2011-07-04 9:46 ` Nicolas Ferre
2011-07-04 17:29 ` Mark Brown [this message]
2011-07-04 17:34 ` Liam Girdwood
2011-07-05 7:58 ` Nicolas Ferre
2011-07-05 20:27 ` [alsa-devel] " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110704172856.GF28726@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
--cc=nicolas.ferre@atmel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox