From: Ingo Molnar <mingo@elte.hu>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org,
Peter Zijlstra <a.p.zijlstra@chello.nl>,
Thomas Gleixner <tglx@linutronix.de>,
Andrew Morton <akpm@linux-foundation.org>
Subject: [GIT PULL] core/printk changes for v3.1
Date: Fri, 22 Jul 2011 14:59:34 +0200 [thread overview]
Message-ID: <20110722125934.GA25433@elte.hu> (raw)
Linus,
Please pull the latest core-printk-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git core-printk-for-linus
( These are just the tested-safe commits - the ones that were causing
problems are not included. )
Thanks,
Ingo
------------------>
Peter Zijlstra (3):
printk: Release console_sem after logbuf_lock
printk: Fix console_sem vs logbuf_lock unlock race
lockdep: Fix trace_[soft,hard]irqs_[on,off]() recursion
kernel/lockdep.c | 30 ++++++++++++++++++++----------
kernel/printk.c | 24 +++++++++++++++++++++---
2 files changed, 41 insertions(+), 13 deletions(-)
diff --git a/kernel/lockdep.c b/kernel/lockdep.c
index 63437d0..81968a0 100644
--- a/kernel/lockdep.c
+++ b/kernel/lockdep.c
@@ -2478,15 +2478,10 @@ mark_held_locks(struct task_struct *curr, enum mark_type mark)
/*
* Hardirqs will be enabled:
*/
-void trace_hardirqs_on_caller(unsigned long ip)
+static void __trace_hardirqs_on_caller(unsigned long ip)
{
struct task_struct *curr = current;
- time_hardirqs_on(CALLER_ADDR0, ip);
-
- if (unlikely(!debug_locks || current->lockdep_recursion))
- return;
-
if (DEBUG_LOCKS_WARN_ON(unlikely(early_boot_irqs_disabled)))
return;
@@ -2502,8 +2497,6 @@ void trace_hardirqs_on_caller(unsigned long ip)
/* we'll do an OFF -> ON transition: */
curr->hardirqs_enabled = 1;
- if (DEBUG_LOCKS_WARN_ON(!irqs_disabled()))
- return;
if (DEBUG_LOCKS_WARN_ON(current->hardirq_context))
return;
/*
@@ -2525,6 +2518,21 @@ void trace_hardirqs_on_caller(unsigned long ip)
curr->hardirq_enable_event = ++curr->irq_events;
debug_atomic_inc(hardirqs_on_events);
}
+
+void trace_hardirqs_on_caller(unsigned long ip)
+{
+ time_hardirqs_on(CALLER_ADDR0, ip);
+
+ if (unlikely(!debug_locks || current->lockdep_recursion))
+ return;
+
+ if (DEBUG_LOCKS_WARN_ON(!irqs_disabled()))
+ return;
+
+ current->lockdep_recursion = 1;
+ __trace_hardirqs_on_caller(ip);
+ current->lockdep_recursion = 0;
+}
EXPORT_SYMBOL(trace_hardirqs_on_caller);
void trace_hardirqs_on(void)
@@ -2574,7 +2582,7 @@ void trace_softirqs_on(unsigned long ip)
{
struct task_struct *curr = current;
- if (unlikely(!debug_locks))
+ if (unlikely(!debug_locks || current->lockdep_recursion))
return;
if (DEBUG_LOCKS_WARN_ON(!irqs_disabled()))
@@ -2585,6 +2593,7 @@ void trace_softirqs_on(unsigned long ip)
return;
}
+ current->lockdep_recursion = 1;
/*
* We'll do an OFF -> ON transition:
*/
@@ -2599,6 +2608,7 @@ void trace_softirqs_on(unsigned long ip)
*/
if (curr->hardirqs_enabled)
mark_held_locks(curr, SOFTIRQ);
+ current->lockdep_recursion = 0;
}
/*
@@ -2608,7 +2618,7 @@ void trace_softirqs_off(unsigned long ip)
{
struct task_struct *curr = current;
- if (unlikely(!debug_locks))
+ if (unlikely(!debug_locks || current->lockdep_recursion))
return;
if (DEBUG_LOCKS_WARN_ON(!irqs_disabled()))
diff --git a/kernel/printk.c b/kernel/printk.c
index 3518539..37dff34 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -782,7 +782,7 @@ static inline int can_use_console(unsigned int cpu)
static int console_trylock_for_printk(unsigned int cpu)
__releases(&logbuf_lock)
{
- int retval = 0;
+ int retval = 0, wake = 0;
if (console_trylock()) {
retval = 1;
@@ -795,12 +795,14 @@ static int console_trylock_for_printk(unsigned int cpu)
*/
if (!can_use_console(cpu)) {
console_locked = 0;
- up(&console_sem);
+ wake = 1;
retval = 0;
}
}
printk_cpu = UINT_MAX;
spin_unlock(&logbuf_lock);
+ if (wake)
+ up(&console_sem);
return retval;
}
static const char recursion_bug_msg [] =
@@ -1242,7 +1244,7 @@ void console_unlock(void)
{
unsigned long flags;
unsigned _con_start, _log_end;
- unsigned wake_klogd = 0;
+ unsigned wake_klogd = 0, retry = 0;
if (console_suspended) {
up(&console_sem);
@@ -1251,6 +1253,7 @@ void console_unlock(void)
console_may_schedule = 0;
+again:
for ( ; ; ) {
spin_lock_irqsave(&logbuf_lock, flags);
wake_klogd |= log_start - log_end;
@@ -1271,8 +1274,23 @@ void console_unlock(void)
if (unlikely(exclusive_console))
exclusive_console = NULL;
+ spin_unlock(&logbuf_lock);
+
up(&console_sem);
+
+ /*
+ * Someone could have filled up the buffer again, so re-check if there's
+ * something to flush. In case we cannot trylock the console_sem again,
+ * there's a new owner and the console_unlock() from them will do the
+ * flush, no worries.
+ */
+ spin_lock(&logbuf_lock);
+ if (con_start != log_end)
+ retry = 1;
spin_unlock_irqrestore(&logbuf_lock, flags);
+ if (retry && console_trylock())
+ goto again;
+
if (wake_klogd)
wake_up_klogd();
}
next reply other threads:[~2011-07-22 13:00 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-22 12:59 Ingo Molnar [this message]
2011-07-25 18:20 ` [GIT PULL] core/printk changes for v3.1 Arnaud Lacombe
2011-07-26 11:28 ` Peter Zijlstra
2011-07-26 11:43 ` Sergey Senozhatsky
2011-07-26 12:15 ` Sergey Senozhatsky
2011-07-26 20:12 ` Arnaud Lacombe
2011-07-26 20:30 ` Linus Torvalds
2011-07-26 20:40 ` Arnaud Lacombe
2011-07-29 20:14 ` [06.5] " Paul Jackson
2011-08-04 8:34 ` [tip:core/urgent] lockdep: Fix trace_hardirqs_on_caller() tip-bot for Peter Zijlstra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110722125934.GA25433@elte.hu \
--to=mingo@elte.hu \
--cc=a.p.zijlstra@chello.nl \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox