* [GIT PULL] sh updates for 3.1-rc1
@ 2011-08-01 8:49 Paul Mundt
0 siblings, 0 replies; only message in thread
From: Paul Mundt @ 2011-08-01 8:49 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linux-sh, linux-kernel
Please pull from:
master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-3.x.git sh-latest
Which contains:
Jesper Juhl (1):
SH: static should be at beginning of declaration
Kuninori Morimoto (21):
dmaengine: shdma: add to_sh_dev define
dmaengine: shdma: tidyup spin_unlock_bh on sh_chan_xfer_ld_queue
dmaengine: shdma: fixup parameter definition on dmae_set_dmars
dmaengine: shdma: add chcr_write/read function
dmaengine: shdma: add chcr_ie_bit
dmaengine: shdma: add dmaor_is_32bit flag
dmaengine: shdma: add .needs_tend_set / .no_dmars flags
sh: clock-sh7724: modify I2C clock settings
sh: clock-sh7722: modify I2C clock settings
sh: clock-sh7723: modify I2C clock settings
sh: clock-sh7343: modify I2C clock settings
sh: clock-sh7366: modify I2C clock settings
sh: clock-sh7724: add CLKDEV_ICK_ID for cleanup
sh: clock-sh7722: add CLKDEV_ICK_ID for cleanup
sh: clock-sh7343: add CLKDEV_ICK_ID for cleanup
sh: clock-sh7366: add CLKDEV_ICK_ID for cleanup
sh: clock-sh7757: add CLKDEV_ICK_ID for cleanup
sh: clock-sh7785: add CLKDEV_ICK_ID for cleanup
sh: clock-sh7786: add CLKDEV_ICK_ID for cleanup
sh: clock-shx3: add CLKDEV_ICK_ID for cleanup
sh: move CLKDEV_xxx_ID macro to sh_clk.h
Magnus Damm (1):
drivers: sh: late disabling of clocks V2
Paul Mundt (16):
serial: sh-sci: Kill off bitrotted H8/300 support.
serial: sh-sci: Tidy up ioread/write wrappers, kill off unused SCI helper.
serial: sh-sci: Kill off some more unused definitions.
serial: sh-sci: Generalize overrun handling.
serial: sh-sci: Consolidate RXD pin handling.
serial: sh-sci: More unused define purging.
serial: sh-sci: Abstract register maps.
serial: sh-sci: FIFO sizing helper consolidation.
serial: sh-sci: Support generic SCLSR overrun detection.
sh: Fix up build fallout from serial merge.
sh: clkfwk: Convert to IS_ERR_OR_NULL.
sh: Tidy up pre-clkdev clk_get() error handling.
serial: sh-sci: Regtype probing doesn't need to be fatal.
serial: sh-sci: Add missing module description/author bits.
serial: sh-sci: Kill off per-port enable/disable callbacks.
serial: sh-sci: Fix up pretty name printing for port IRQs.
Yoshihiro Shimoda (5):
sh: fix compile error using sh7757lcr_defconfig
sh: add platform_device of EHCI/OHCI to setup-sh7757
sh: add to select the new configuration for USB EHCI/OHCI
sh: fix the INTC vector for IRQ and IRL in setup-sh7757
sh: fix the value of sh_dmae_slave_config in setup-sh7757
arch/arm/mach-shmobile/clock-sh7367.c | 3 -
arch/arm/mach-shmobile/clock-sh7372.c | 4 -
arch/arm/mach-shmobile/clock-sh7377.c | 3 -
arch/arm/mach-shmobile/clock-sh73a0.c | 4 -
arch/sh/Kconfig | 5 +
arch/sh/Makefile | 1 +
arch/sh/boards/board-apsh4a3a.c | 2 +-
arch/sh/boards/board-apsh4ad0a.c | 2 +-
arch/sh/boards/board-sh7785lcr.c | 2 +-
arch/sh/boards/board-urquell.c | 2 +-
arch/sh/boards/mach-ap325rxa/setup.c | 2 +-
arch/sh/boards/mach-ecovec24/setup.c | 4 +-
arch/sh/boards/mach-highlander/setup.c | 2 -
arch/sh/boards/mach-kfr2r09/setup.c | 2 +-
arch/sh/boards/mach-migor/setup.c | 2 +-
arch/sh/boards/mach-sdk7786/setup.c | 2 +-
arch/sh/boards/mach-se/7724/setup.c | 4 +-
arch/sh/configs/sh7757lcr_defconfig | 8 +-
arch/sh/include/cpu-sh3/cpu/serial.h | 10 +
arch/sh/include/cpu-sh4a/cpu/serial.h | 7 +
arch/sh/kernel/cpu/clock-cpg.c | 2 -
arch/sh/kernel/cpu/sh3/Makefile | 18 +-
arch/sh/kernel/cpu/sh3/serial-sh770x.c | 33 ++
arch/sh/kernel/cpu/sh3/serial-sh7710.c | 20 +
arch/sh/kernel/cpu/sh3/serial-sh7720.c | 37 ++
arch/sh/kernel/cpu/sh3/setup-sh7705.c | 5 +
arch/sh/kernel/cpu/sh3/setup-sh770x.c | 9 +
arch/sh/kernel/cpu/sh3/setup-sh7720.c | 5 +
arch/sh/kernel/cpu/sh4/clock-sh4-202.c | 2 -
arch/sh/kernel/cpu/sh4/setup-sh7750.c | 4 +-
arch/sh/kernel/cpu/sh4/setup-sh7760.c | 4 +
arch/sh/kernel/cpu/sh4a/Makefile | 2 +-
arch/sh/kernel/cpu/sh4a/clock-sh7343.c | 33 +-
arch/sh/kernel/cpu/sh4a/clock-sh7366.c | 25 +-
arch/sh/kernel/cpu/sh4a/clock-sh7722.c | 46 +--
arch/sh/kernel/cpu/sh4a/clock-sh7723.c | 4 +-
arch/sh/kernel/cpu/sh4a/clock-sh7724.c | 84 +---
arch/sh/kernel/cpu/sh4a/clock-sh7757.c | 36 +--
arch/sh/kernel/cpu/sh4a/clock-sh7763.c | 2 -
arch/sh/kernel/cpu/sh4a/clock-sh7780.c | 2 -
arch/sh/kernel/cpu/sh4a/clock-sh7785.c | 79 +---
arch/sh/kernel/cpu/sh4a/clock-sh7786.c | 115 +----
arch/sh/kernel/cpu/sh4a/clock-shx3.c | 67 +---
arch/sh/kernel/cpu/sh4a/serial-sh7722.c | 23 +
arch/sh/kernel/cpu/sh4a/setup-sh7366.c | 1 +
arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 7 +
arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 9 +
arch/sh/kernel/cpu/sh4a/setup-sh7724.c | 9 +
arch/sh/kernel/cpu/sh4a/setup-sh7757.c | 106 ++++--
arch/sh/kernel/cpu/sh4a/setup-sh7763.c | 3 +
arch/sh/kernel/cpu/sh4a/setup-sh7780.c | 3 +-
arch/sh/kernel/cpu/sh4a/setup-sh7785.c | 8 +-
arch/sh/kernel/cpu/sh4a/setup-sh7786.c | 8 +-
drivers/dma/shdma.c | 88 +++-
drivers/dma/shdma.h | 4 +
drivers/sh/clk/core.c | 29 ++-
drivers/tty/serial/Kconfig | 2 +-
drivers/tty/serial/sh-sci.c | 757 +++++++++++++++++++------------
drivers/tty/serial/sh-sci.h | 434 +------------------
include/linux/serial_sci.h | 75 +++
include/linux/sh_clk.h | 4 +
include/linux/sh_dma.h | 8 +
62 files changed, 1055 insertions(+), 1228 deletions(-)
create mode 100644 arch/sh/include/cpu-sh3/cpu/serial.h
create mode 100644 arch/sh/include/cpu-sh4a/cpu/serial.h
create mode 100644 arch/sh/kernel/cpu/sh3/serial-sh770x.c
create mode 100644 arch/sh/kernel/cpu/sh3/serial-sh7710.c
create mode 100644 arch/sh/kernel/cpu/sh3/serial-sh7720.c
create mode 100644 arch/sh/kernel/cpu/sh4a/serial-sh7722.c
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2011-08-01 8:49 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-08-01 8:49 [GIT PULL] sh updates for 3.1-rc1 Paul Mundt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox