From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org, stable@kernel.org
Cc: stable-review@kernel.org, torvalds@linux-foundation.org,
akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk
Subject: [00/50] 2.6.33.17-longterm review
Date: Fri, 5 Aug 2011 17:04:19 -0700 [thread overview]
Message-ID: <20110806000419.GA28392@kroah.com> (raw)
This is the start of the stable review cycle for the 2.6.33.17 release.
There are 50 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let us know. If anyone is a maintainer of the proper subsystem, and
wants to add a Signed-off-by: line to the patch, please respond with it.
Responses should be made by Monday, August 8, 2011, 00:00:00 UTC.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
kernel.org/pub/linux/kernel/v2.6/stable-review/patch-2.6.33.17-rc1.gz
and the diffstat can be found below.
thanks,
greg k-h
Makefile | 2 +-
arch/alpha/kernel/osf_sys.c | 11 ++++--
arch/arm/mach-davinci/board-dm365-evm.c | 4 +-
arch/arm/mach-pxa/cm-x300.c | 8 ++--
arch/powerpc/kernel/crash.c | 6 +---
arch/powerpc/platforms/pseries/hvconsole.c | 2 +-
arch/x86/kernel/hpet.c | 53 +++++++++++++++------------
arch/x86/kernel/reboot.c | 8 ++++
arch/x86/kernel/relocate_kernel_32.S | 2 +
arch/x86/kernel/relocate_kernel_64.S | 2 +
arch/xtensa/kernel/ptrace.c | 3 ++
block/blk-core.c | 3 ++
block/blk-exec.c | 7 ++++
drivers/ata/libata-eh.c | 12 ++++--
drivers/block/cciss.h | 2 +-
drivers/hwmon/asus_atk0110.c | 1 +
drivers/hwmon/max1111.c | 11 ++++++
drivers/md/dm-mpath.c | 5 +++
drivers/md/dm.c | 10 ++++-
drivers/media/radio/si4713-i2c.c | 4 +-
drivers/media/video/bt8xx/bttv-driver.c | 2 +-
drivers/media/video/pvrusb2/pvrusb2-hdw.c | 4 ++
drivers/media/video/v4l2-ioctl.c | 6 +++
drivers/misc/Kconfig | 3 +-
drivers/net/jme.c | 20 +++++++---
drivers/pci/pci.c | 7 +++-
drivers/scsi/libsas/sas_expander.c | 3 ++
drivers/scsi/pmcraid.c | 3 ++
drivers/scsi/scsi_devinfo.c | 2 +
drivers/scsi/scsi_lib.c | 2 +
drivers/scsi/ses.c | 6 +++-
drivers/staging/comedi/comedi_fops.c | 4 +-
drivers/usb/gadget/dummy_hcd.c | 1 +
drivers/usb/host/ehci-hub.c | 3 +-
drivers/usb/host/ehci-q.c | 3 +-
drivers/usb/host/ehci.h | 1 +
drivers/usb/musb/musb_core.c | 1 +
drivers/usb/serial/pl2303.c | 2 +
drivers/usb/serial/pl2303.h | 10 +++++-
fs/block_dev.c | 27 +++++---------
fs/ext3/xattr.c | 12 +++++-
fs/proc/base.c | 7 +++-
include/drm/i915_drm.h | 2 +-
include/linux/netdevice.h | 5 ++-
net/bridge/br_private.h | 1 +
net/bridge/br_stp.c | 4 +-
net/ipv4/ip_gre.c | 19 +++++-----
net/ipv6/xfrm6_tunnel.c | 16 ++++++---
net/mac80211/mlme.c | 3 ++
net/sunrpc/rpcb_clnt.c | 2 +-
net/sunrpc/sched.c | 27 ++++++--------
net/sunrpc/svc_xprt.c | 11 +++---
sound/core/pcm_compat.c | 2 +-
sound/soc/blackfin/bf5xx-i2s-pcm.c | 13 ++++++-
54 files changed, 259 insertions(+), 131 deletions(-)
next reply other threads:[~2011-08-06 0:05 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-06 0:04 Greg KH [this message]
2011-08-06 0:03 ` [01/50] ASoC: Fix Blackfin I2S _pointer() implementation return in bounds values Greg KH
2011-08-06 0:03 ` [02/50] [media] v4l2-ioctl.c: prefill tuner type for g_frequency and g/s_tuner Greg KH
2011-08-06 0:03 ` [03/50] [media] pvrusb2: fix g/s_tuner support Greg KH
2011-08-06 0:03 ` [04/50] [media] bttv: fix s_tuner for radio Greg KH
2011-08-06 0:03 ` [05/50] SUNRPC: Fix a race between work-queue and rpc_killall_tasks Greg KH
2011-08-06 0:03 ` [06/50] SUNRPC: Fix use of static variable in rpcb_getport_async Greg KH
2011-08-06 0:03 ` [07/50] si4713-i2c: avoid potential buffer overflow on si4713 Greg KH
2011-08-06 0:03 ` [08/50] hwmon: (asus_atk0110) Fix memory leak Greg KH
2011-08-06 0:03 ` [09/50] hwmon: (max1111) Fix race condition causing NULL pointer exception Greg KH
2011-08-06 0:03 ` [10/50] USB: pl2303: add AdLink ND-6530 USB IDs Greg KH
2011-08-06 0:03 ` [11/50] USB: pl2303.h: checkpatch cleanups Greg KH
2011-08-06 0:03 ` [12/50] USB: serial: add IDs for WinChipHead USB->RS232 adapter Greg KH
2011-08-06 0:03 ` [13/50] bridge: send proper message_age in config BPDU Greg KH
2011-08-06 0:03 ` [14/50] davinci: DM365 EVM: fix video input mux bits Greg KH
2011-08-06 0:03 ` [15/50] libata: fix unexpectedly frozen port after ata_eh_reset() Greg KH
2011-08-06 0:03 ` [16/50] x86: Make Dell Latitude E5420 use reboot=pci Greg KH
2011-08-06 0:03 ` [17/50] gro: Only reset frag0 when skb can be pulled Greg KH
2011-08-06 0:03 ` [18/50] staging: comedi: fix infoleak to userspace Greg KH
2011-08-06 0:03 ` [19/50] usb: musb: restore INDEX register in resume path Greg KH
2011-08-06 0:03 ` [20/50] USB: dummy-hcd needs the has_tt flag Greg KH
2011-08-06 0:03 ` [21/50] ARM: pxa/cm-x300: fix V3020 RTC functionality Greg KH
2011-08-06 0:03 ` [22/50] jme: Fix unmap error (Causing system freeze) Greg KH
2011-08-06 0:03 ` [23/50] [SCSI] libsas: remove expander from dev list on error Greg KH
2011-08-06 0:03 ` [24/50] mac80211: Restart STA timers only on associated state Greg KH
2011-08-06 0:03 ` [25/50] [SCSI] Blacklist Traxdata CDR4120 and IOMEGA Zip drive to avoid lock ups Greg KH
2011-08-06 0:03 ` [26/50] [SCSI] ses: requesting a fault indication Greg KH
2011-08-06 0:03 ` [27/50] [SCSI] fix crash in scsi_dispatch_cmd() Greg KH
2011-08-06 0:03 ` [28/50] [SCSI] pmcraid: reject negative request size Greg KH
2011-08-06 0:03 ` [29/50] kexec, x86: Fix incorrect jump back address if not Greg KH
2011-08-06 0:03 ` [30/50] powerpc/kdump: Fix timeout in crash_kexec_wait_realmode Greg KH
2011-08-06 0:03 ` [31/50] PCI: ARI is a PCIe v2 feature Greg KH
2011-08-06 0:03 ` [32/50] cciss: do not attempt to read from a write-only register Greg KH
2011-08-06 0:03 ` [33/50] geode: reflect mfgpt dependency on mfd Greg KH
2011-08-06 0:03 ` [34/50] xtensa: prevent arbitrary read in ptrace Greg KH
2011-08-06 0:03 ` [35/50] ext3: Fix oops in ext3_try_to_allocate_with_rsv() Greg KH
2011-08-06 0:03 ` [36/50] svcrpc: fix list-corrupting race on nfsd shutdown Greg KH
2011-08-06 0:03 ` [37/50] EHCI: only power off port if over-current is active Greg KH
2011-08-06 0:03 ` [38/50] EHCI: fix direction handling for interrupt data toggles Greg KH
2011-08-06 0:03 ` [39/50] powerpc/pseries/hvconsole: Fix dropped console output Greg KH
2011-08-06 0:03 ` [40/50] x86: Hpet: Avoid the comparator readback penalty Greg KH
2011-08-06 0:03 ` [41/50] x86: HPET: Chose a paranoid safe value for the ETIME check Greg KH
2011-08-06 0:04 ` [42/50] Revert "block: rescan partitions on invalidated devices on -ENOMEDIA Greg KH
2011-08-06 0:04 ` [43/50] gre: fix netns vs proto registration ordering Greg KH
2011-08-06 0:04 ` [44/50] netns xfrm: fixup xfrm6_tunnel error propagation Greg KH
2011-08-06 0:04 ` [45/50] alpha: fix several security issues Greg KH
2011-08-06 0:04 ` [46/50] proc: restrict access to /proc/PID/io Greg KH
2011-08-06 0:04 ` [47/50] ALSA: sound/core/pcm_compat.c: adjust array index Greg KH
2011-08-06 0:04 ` [48/50] dm mpath: fix potential NULL pointer in feature arg processing Greg KH
2011-08-06 0:04 ` [49/50] dm: fix idr leak on module removal Greg KH
2011-08-06 0:04 ` [50/50] drm/i915: Fix typo in DRM_I915_OVERLAY_PUT_IMAGE ioctl Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110806000419.GA28392@kroah.com \
--to=gregkh@suse.de \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=stable-review@kernel.org \
--cc=stable@kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox