[00/50] 2.6.33.17-longterm review

[00/50] 2.6.33.17-longterm review

[Greg KH]

This is the start of the stable review cycle for the 2.6.33.17 release.
There are 50 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let us know.  If anyone is a maintainer of the proper subsystem, and
wants to add a Signed-off-by: line to the patch, please respond with it.

Responses should be made by Monday, August 8, 2011, 00:00:00 UTC.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v2.6/stable-review/patch-2.6.33.17-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h


 Makefile                                   |    2 +-
 arch/alpha/kernel/osf_sys.c                |   11 ++++--
 arch/arm/mach-davinci/board-dm365-evm.c    |    4 +-
 arch/arm/mach-pxa/cm-x300.c                |    8 ++--
 arch/powerpc/kernel/crash.c                |    6 +---
 arch/powerpc/platforms/pseries/hvconsole.c |    2 +-
 arch/x86/kernel/hpet.c                     |   53 +++++++++++++++------------
 arch/x86/kernel/reboot.c                   |    8 ++++
 arch/x86/kernel/relocate_kernel_32.S       |    2 +
 arch/x86/kernel/relocate_kernel_64.S       |    2 +
 arch/xtensa/kernel/ptrace.c                |    3 ++
 block/blk-core.c                           |    3 ++
 block/blk-exec.c                           |    7 ++++
 drivers/ata/libata-eh.c                    |   12 ++++--
 drivers/block/cciss.h                      |    2 +-
 drivers/hwmon/asus_atk0110.c               |    1 +
 drivers/hwmon/max1111.c                    |   11 ++++++
 drivers/md/dm-mpath.c                      |    5 +++
 drivers/md/dm.c                            |   10 ++++-
 drivers/media/radio/si4713-i2c.c           |    4 +-
 drivers/media/video/bt8xx/bttv-driver.c    |    2 +-
 drivers/media/video/pvrusb2/pvrusb2-hdw.c  |    4 ++
 drivers/media/video/v4l2-ioctl.c           |    6 +++
 drivers/misc/Kconfig                       |    3 +-
 drivers/net/jme.c                          |   20 +++++++---
 drivers/pci/pci.c                          |    7 +++-
 drivers/scsi/libsas/sas_expander.c         |    3 ++
 drivers/scsi/pmcraid.c                     |    3 ++
 drivers/scsi/scsi_devinfo.c                |    2 +
 drivers/scsi/scsi_lib.c                    |    2 +
 drivers/scsi/ses.c                         |    6 +++-
 drivers/staging/comedi/comedi_fops.c       |    4 +-
 drivers/usb/gadget/dummy_hcd.c             |    1 +
 drivers/usb/host/ehci-hub.c                |    3 +-
 drivers/usb/host/ehci-q.c                  |    3 +-
 drivers/usb/host/ehci.h                    |    1 +
 drivers/usb/musb/musb_core.c               |    1 +
 drivers/usb/serial/pl2303.c                |    2 +
 drivers/usb/serial/pl2303.h                |   10 +++++-
 fs/block_dev.c                             |   27 +++++---------
 fs/ext3/xattr.c                            |   12 +++++-
 fs/proc/base.c                             |    7 +++-
 include/drm/i915_drm.h                     |    2 +-
 include/linux/netdevice.h                  |    5 ++-
 net/bridge/br_private.h                    |    1 +
 net/bridge/br_stp.c                        |    4 +-
 net/ipv4/ip_gre.c                          |   19 +++++-----
 net/ipv6/xfrm6_tunnel.c                    |   16 ++++++---
 net/mac80211/mlme.c                        |    3 ++
 net/sunrpc/rpcb_clnt.c                     |    2 +-
 net/sunrpc/sched.c                         |   27 ++++++--------
 net/sunrpc/svc_xprt.c                      |   11 +++---
 sound/core/pcm_compat.c                    |    2 +-
 sound/soc/blackfin/bf5xx-i2s-pcm.c         |   13 ++++++-
 54 files changed, 259 insertions(+), 131 deletions(-)

[01/50] ASoC: Fix Blackfin I2S _pointer() implementation return in bounds values

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Mark Brown <broonie@opensource.wolfsonmicro.com>

commit e999dc50404d401150a5429b6459473a691fd1a0 upstream.

The Blackfin DMA controller can report one frame beyond the end of the
buffer in the wraparound case but ALSA requires that the pointer always
be in the buffer. Do the wraparound to handle this. A similar bug is
likely to apply to the other Blackfin PCM drivers but the code is less
obvious to inspection and I don't have a user to test.

Reported-by: Kieran O'Leary <Kieran.O'Leary@wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 sound/soc/blackfin/bf5xx-i2s-pcm.c |   13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

--- a/sound/soc/blackfin/bf5xx-i2s-pcm.c
+++ b/sound/soc/blackfin/bf5xx-i2s-pcm.c
@@ -139,11 +139,20 @@ static snd_pcm_uframes_t bf5xx_pcm_point
 	pr_debug("%s enter\n", __func__);
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 		diff = sport_curr_offset_tx(sport);
-		frames = bytes_to_frames(substream->runtime, diff);
 	} else {
 		diff = sport_curr_offset_rx(sport);
-		frames = bytes_to_frames(substream->runtime, diff);
 	}
+
+	/*
+	 * TX at least can report one frame beyond the end of the
+	 * buffer if we hit the wraparound case - clamp to within the
+	 * buffer as the ALSA APIs require.
+	 */
+	if (diff == snd_pcm_lib_buffer_bytes(substream))
+		diff = 0;
+
+	frames = bytes_to_frames(substream->runtime, diff);
+
 	return frames;
 }
 

[02/50] [media] v4l2-ioctl.c: prefill tuner type for g_frequency and g/s_tuner

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Hans Verkuil <hans.verkuil@cisco.com>

commit 227690df75382e46a4f6ea1bbc5df855a674b47f upstream.

The subdevs are supposed to receive a valid tuner type for the g_frequency
and g/s_tuner subdev ops. Some drivers do this, others don't. So prefill
this in v4l2-ioctl.c based on whether the device node from which this is
called is a radio node or not.

The spec does not require applications to fill in the type, and if they
leave it at 0 then the 'check_mode' call in tuner-core.c will return
an error and the ioctl does nothing.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/media/video/v4l2-ioctl.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/media/video/v4l2-ioctl.c
+++ b/drivers/media/video/v4l2-ioctl.c
@@ -1632,6 +1632,8 @@ static long __video_do_ioctl(struct file
 		if (!ops->vidioc_g_tuner)
 			break;
 
+		p->type = (vfd->vfl_type == VFL_TYPE_RADIO) ?
+			V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
 		ret = ops->vidioc_g_tuner(file, fh, p);
 		if (!ret)
 			dbgarg(cmd, "index=%d, name=%s, type=%d, "
@@ -1650,6 +1652,8 @@ static long __video_do_ioctl(struct file
 
 		if (!ops->vidioc_s_tuner)
 			break;
+		p->type = (vfd->vfl_type == VFL_TYPE_RADIO) ?
+			V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
 		dbgarg(cmd, "index=%d, name=%s, type=%d, "
 				"capability=0x%x, rangelow=%d, "
 				"rangehigh=%d, signal=%d, afc=%d, "
@@ -1668,6 +1672,8 @@ static long __video_do_ioctl(struct file
 		if (!ops->vidioc_g_frequency)
 			break;
 
+		p->type = (vfd->vfl_type == VFL_TYPE_RADIO) ?
+			V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
 		ret = ops->vidioc_g_frequency(file, fh, p);
 		if (!ret)
 			dbgarg(cmd, "tuner=%d, type=%d, frequency=%d\n",

[03/50] [media] pvrusb2: fix g/s_tuner support

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Hans Verkuil <hans.verkuil@cisco.com>

commit 50e9efd60b213ce43ad6979bfc18e25eec2d8413 upstream.

The tuner-core subdev requires that the type field of v4l2_tuner is
filled in correctly. This is done in v4l2-ioctl.c, but pvrusb2 doesn't
use that yet, so we have to do it manually based on whether the current
input is radio or not.

Tested with my pvrusb2.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/media/video/pvrusb2/pvrusb2-hdw.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -3015,6 +3015,8 @@ static void pvr2_subdev_update(struct pv
 	if (hdw->input_dirty || hdw->audiomode_dirty || hdw->force_dirty) {
 		struct v4l2_tuner vt;
 		memset(&vt, 0, sizeof(vt));
+		vt.type = (hdw->input_val == PVR2_CVAL_INPUT_RADIO) ?
+			V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
 		vt.audmode = hdw->audiomode_val;
 		v4l2_device_call_all(&hdw->v4l2_dev, 0, tuner, s_tuner, &vt);
 	}
@@ -5101,6 +5103,8 @@ void pvr2_hdw_status_poll(struct pvr2_hd
 {
 	struct v4l2_tuner *vtp = &hdw->tuner_signal_info;
 	memset(vtp, 0, sizeof(*vtp));
+	vtp->type = (hdw->input_val == PVR2_CVAL_INPUT_RADIO) ?
+		V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
 	hdw->tuner_signal_stale = 0;
 	/* Note: There apparently is no replacement for VIDIOC_CROPCAP
 	   using v4l2-subdev - therefore we can't support that AT ALL right

[04/50] [media] bttv: fix s_tuner for radio

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Hans Verkuil <hans.verkuil@cisco.com>

commit a024c1a6b274e11596d124619e43c25560f64c01 upstream.

Fix typo: g_tuner should have been s_tuner.

Tested with a bttv card.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/media/video/bt8xx/bttv-driver.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -3526,7 +3526,7 @@ static int radio_s_tuner(struct file *fi
 	if (0 != t->index)
 		return -EINVAL;
 
-	bttv_call_all(btv, tuner, g_tuner, t);
+	bttv_call_all(btv, tuner, s_tuner, t);
 	return 0;
 }
 

[05/50] SUNRPC: Fix a race between work-queue and rpc_killall_tasks

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Trond Myklebust <Trond.Myklebust@netapp.com>

commit b55c59892e1f3b6c7d4b9ccffb4263e1486fb990 upstream.

Since rpc_killall_tasks may modify the rpc_task's tk_action field
without any locking, we need to be careful when dereferencing it.

Reported-by: Ben Greear <greearb@candelatech.com>
Tested-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 net/sunrpc/sched.c |   27 +++++++++++----------------
 1 file changed, 11 insertions(+), 16 deletions(-)

--- a/net/sunrpc/sched.c
+++ b/net/sunrpc/sched.c
@@ -628,30 +628,25 @@ static void __rpc_execute(struct rpc_tas
 	BUG_ON(RPC_IS_QUEUED(task));
 
 	for (;;) {
+		void (*do_action)(struct rpc_task *);
 
 		/*
-		 * Execute any pending callback.
+		 * Execute any pending callback first.
 		 */
-		if (task->tk_callback) {
-			void (*save_callback)(struct rpc_task *);
-
-			/*
-			 * We set tk_callback to NULL before calling it,
-			 * in case it sets the tk_callback field itself:
-			 */
-			save_callback = task->tk_callback;
-			task->tk_callback = NULL;
-			save_callback(task);
-		} else {
+		do_action = task->tk_callback;
+		task->tk_callback = NULL;
+		if (do_action == NULL) {
 			/*
 			 * Perform the next FSM step.
-			 * tk_action may be NULL when the task has been killed
-			 * by someone else.
+			 * tk_action may be NULL if the task has been killed.
+			 * In particular, note that rpc_killall_tasks may
+			 * do this at any time, so beware when dereferencing.
 			 */
-			if (task->tk_action == NULL)
+			do_action = task->tk_action;
+			if (do_action == NULL)
 				break;
-			task->tk_action(task);
 		}
+		do_action(task);
 
 		/*
 		 * Lockless check for whether task is sleeping or not.

[06/50] SUNRPC: Fix use of static variable in rpcb_getport_async

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Ben Greear <greearb@candelatech.com>

commit ec0dd267bf7d08cb30e321e45a75fd40edd7e528 upstream.

Because struct rpcbind_args *map was declared static, if two
threads entered this method at the same time, the values
assigned to map could be sent two two differen tasks.
This could cause all sorts of problems, include use-after-free
and double-free of memory.

Fix this by removing the static declaration so that the map
pointer is on the stack.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 net/sunrpc/rpcb_clnt.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/sunrpc/rpcb_clnt.c
+++ b/net/sunrpc/rpcb_clnt.c
@@ -579,7 +579,7 @@ void rpcb_getport_async(struct rpc_task
 	u32 bind_version;
 	struct rpc_xprt *xprt;
 	struct rpc_clnt	*rpcb_clnt;
-	static struct rpcbind_args *map;
+	struct rpcbind_args *map;
 	struct rpc_task	*child;
 	struct sockaddr_storage addr;
 	struct sockaddr *sap = (struct sockaddr *)&addr;

[07/50] si4713-i2c: avoid potential buffer overflow on si4713

[Greg KH]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1554 bytes --]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Mauro Carvalho Chehab <mchehab@redhat.com>

commit dc6b845044ccb7e9e6f3b7e71bd179b3cf0223b6 upstream.

While compiling it with Fedora 15, I noticed this issue:

  inlined from ‘si4713_write_econtrol_string’ at drivers/media/radio/si4713-i2c.c:1065:24:
  arch/x86/include/asm/uaccess_32.h:211:26: error: call to ‘copy_from_user_overflow’ declared with attribute error: copy_from_user() buffer size is not provably correct

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Reviewed-by: Eugene Teo <eugeneteo@kernel.sg>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/media/radio/si4713-i2c.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/media/radio/si4713-i2c.c
+++ b/drivers/media/radio/si4713-i2c.c
@@ -1003,7 +1003,7 @@ static int si4713_write_econtrol_string(
 		char ps_name[MAX_RDS_PS_NAME + 1];
 
 		len = control->size - 1;
-		if (len > MAX_RDS_PS_NAME) {
+		if (len < 0 || len > MAX_RDS_PS_NAME) {
 			rval = -ERANGE;
 			goto exit;
 		}
@@ -1025,7 +1025,7 @@ static int si4713_write_econtrol_string(
 		char radio_text[MAX_RDS_RADIO_TEXT + 1];
 
 		len = control->size - 1;
-		if (len > MAX_RDS_RADIO_TEXT) {
+		if (len < 0 || len > MAX_RDS_RADIO_TEXT) {
 			rval = -ERANGE;
 			goto exit;
 		}

[08/50] hwmon: (asus_atk0110) Fix memory leak

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Luca Tettamanti <kronos.it@gmail.com>

commit 0b8e77f12cb6bfe2e5a67f2cdc8c7af23abc4ccf upstream.

The object returned by atk_gitm is dynamically allocated and must be
freed.

Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/hwmon/asus_atk0110.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/hwmon/asus_atk0110.c
+++ b/drivers/hwmon/asus_atk0110.c
@@ -654,6 +654,7 @@ static int atk_debugfs_gitm_get(void *p,
 	else
 		err = -EIO;
 
+	ACPI_FREE(ret);
 	return err;
 }
 

[09/50] hwmon: (max1111) Fix race condition causing NULL pointer exception

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Pavel Herrmann <morpheus.ibis@gmail.com>

commit d3f684f2820a7f42acef68bea6622d9032127fb2 upstream.

spi_sync call uses its spi_message parameter to keep completion information,
using a drvdata structure is not thread-safe. Use a mutex to prevent
multiple access to shared driver data.

Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Cyril Hrubis <metan@ucw.cz>
Tested-by: Stanislav Brabec <utx@penguin.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/hwmon/max1111.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/drivers/hwmon/max1111.c
+++ b/drivers/hwmon/max1111.c
@@ -39,6 +39,8 @@ struct max1111_data {
 	struct spi_transfer	xfer[2];
 	uint8_t *tx_buf;
 	uint8_t *rx_buf;
+	struct mutex		drvdata_lock;
+	/* protect msg, xfer and buffers from multiple access */
 };
 
 static int max1111_read(struct device *dev, int channel)
@@ -47,6 +49,9 @@ static int max1111_read(struct device *d
 	uint8_t v1, v2;
 	int err;
 
+	/* writing to drvdata struct is not thread safe, wait on mutex */
+	mutex_lock(&data->drvdata_lock);
+
 	data->tx_buf[0] = (channel << MAX1111_CTRL_SEL_SH) |
 		MAX1111_CTRL_PD0 | MAX1111_CTRL_PD1 |
 		MAX1111_CTRL_SGL | MAX1111_CTRL_UNI | MAX1111_CTRL_STR;
@@ -54,12 +59,15 @@ static int max1111_read(struct device *d
 	err = spi_sync(data->spi, &data->msg);
 	if (err < 0) {
 		dev_err(dev, "spi_sync failed with %d\n", err);
+		mutex_unlock(&data->drvdata_lock);
 		return err;
 	}
 
 	v1 = data->rx_buf[0];
 	v2 = data->rx_buf[1];
 
+	mutex_unlock(&data->drvdata_lock);
+
 	if ((v1 & 0xc0) || (v2 & 0x3f))
 		return -EINVAL;
 
@@ -175,6 +183,8 @@ static int __devinit max1111_probe(struc
 	if (err)
 		goto err_free_data;
 
+	mutex_init(&data->drvdata_lock);
+
 	data->spi = spi;
 	spi_set_drvdata(spi, data);
 
@@ -212,6 +222,7 @@ static int __devexit max1111_remove(stru
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&spi->dev.kobj, &max1111_attr_group);
+	mutex_destroy(&data->drvdata_lock);
 	kfree(data->rx_buf);
 	kfree(data->tx_buf);
 	kfree(data);

[10/50] USB: pl2303: add AdLink ND-6530 USB IDs

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Manuel Jander <manuel.jander@gmail.com>

commit 9a61d72602771906e11a5944e8571f8006387b39 upstream.

I read a rumor that the AdLink ND6530 USB RS232, RS422 and RS485
isolated adapter is actually a PL2303 based usb serial adapter. I
tried it out, and as far as I can tell it works.

Signed-off-by: Manuel Jander <manuel.jander@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/serial/pl2303.c |    1 +
 drivers/usb/serial/pl2303.h |    4 ++++
 2 files changed, 5 insertions(+)

--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -99,6 +99,7 @@ static struct usb_device_id id_table []
 	{ USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
 	{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
 	{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
+	{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -136,3 +136,7 @@
 /* Sanwa KB-USB2 multimeter cable (ID: 11ad:0001) */
 #define SANWA_VENDOR_ID		0x11ad
 #define SANWA_PRODUCT_ID	0x0001
+
+/* ADLINK ND-6530 RS232,RS485 and RS422 adapter */
+#define ADLINK_VENDOR_ID        0x0b63
+#define ADLINK_ND6530_PRODUCT_ID       0x6530

[11/50] USB: pl2303.h: checkpatch cleanups

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Greg Kroah-Hartman <gregkh@suse.de>

commit 5d78fcb0caf219e2e6c8e486d7e31fec1333ac06 upstream.

Minor whitespace cleanups to make checkpatch happy.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/serial/pl2303.h |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -5,7 +5,7 @@
  *	it under the terms of the GNU General Public License as published by
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
- * 
+ *
  */
 
 #define BENQ_VENDOR_ID			0x04a5
@@ -138,5 +138,5 @@
 #define SANWA_PRODUCT_ID	0x0001
 
 /* ADLINK ND-6530 RS232,RS485 and RS422 adapter */
-#define ADLINK_VENDOR_ID        0x0b63
-#define ADLINK_ND6530_PRODUCT_ID       0x6530
+#define ADLINK_VENDOR_ID		0x0b63
+#define ADLINK_ND6530_PRODUCT_ID	0x6530

[12/50] USB: serial: add IDs for WinChipHead USB->RS232 adapter

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Wolfgang Denk <wd@denx.de>

commit 026dfaf18973404a01f488d6aa556a8c466e06a4 upstream.

Add ID 4348:5523 for WinChipHead USB->RS 232 adapter with
Prolifec PL2303 chipset

Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/serial/pl2303.c |    1 +
 drivers/usb/serial/pl2303.h |    4 ++++
 2 files changed, 5 insertions(+)

--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -100,6 +100,7 @@ static struct usb_device_id id_table []
 	{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
 	{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
 	{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
+	{ USB_DEVICE(WINCHIPHEAD_VENDOR_ID, WINCHIPHEAD_USBSER_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -140,3 +140,7 @@
 /* ADLINK ND-6530 RS232,RS485 and RS422 adapter */
 #define ADLINK_VENDOR_ID		0x0b63
 #define ADLINK_ND6530_PRODUCT_ID	0x6530
+
+/* WinChipHead USB->RS 232 adapter */
+#define WINCHIPHEAD_VENDOR_ID		0x4348
+#define WINCHIPHEAD_USBSER_PRODUCT_ID	0x5523

[13/50] bridge: send proper message_age in config BPDU

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: stephen hemminger <shemminger@vyatta.com>

commit 0c03150e7ea8f7fcd03cfef29385e0010b22ee92 upstream.

A bridge topology with three systems:

      +------+  +------+
      | A(2) |--| B(1) |
      +------+  +------+
           \    /
          +------+
          | C(3) |
          +------+

What is supposed to happen:
 * bridge with the lowest ID is elected root (for example: B)
 * C detects that A->C is higher cost path and puts in blocking state

What happens. Bridge with lowest id (B) is elected correctly as
root and things start out fine initially. But then config BPDU
doesn't get transmitted from A -> C. Because of that
the link from A-C is transistioned to the forwarding state.

The root cause of this is that the configuration messages
is generated with bogus message age, and dropped before
sending.

In the standardmessage_age is supposed to be:
  the time since the generation of the Configuration BPDU by
  the Root that instigated the generation of this Configuration BPDU.

Reimplement this by recording the timestamp (age + jiffies) when
recording config information. The old code incorrectly used the time
elapsed on the ageing timer which was incorrect.

See also:
  https://bugzilla.vyatta.com/show_bug.cgi?id=7164

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 net/bridge/br_private.h |    1 +
 net/bridge/br_stp.c     |    4 ++--
 2 files changed, 3 insertions(+), 2 deletions(-)

--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -75,6 +75,7 @@ struct net_bridge_port
 	bridge_id			designated_bridge;
 	u32				path_cost;
 	u32				designated_cost;
+	unsigned long			designated_age;
 
 	struct timer_list		forward_delay_timer;
 	struct timer_list		hold_timer;
--- a/net/bridge/br_stp.c
+++ b/net/bridge/br_stp.c
@@ -165,8 +165,7 @@ void br_transmit_config(struct net_bridg
 	else {
 		struct net_bridge_port *root
 			= br_get_port(br, br->root_port);
-		bpdu.message_age = br->max_age
-			- (root->message_age_timer.expires - jiffies)
+		bpdu.message_age = (jiffies - root->designated_age)
 			+ MESSAGE_AGE_INCR;
 	}
 	bpdu.max_age = br->max_age;
@@ -190,6 +189,7 @@ static inline void br_record_config_info
 	p->designated_cost = bpdu->root_path_cost;
 	p->designated_bridge = bpdu->bridge_id;
 	p->designated_port = bpdu->port_id;
+	p->designated_age = jiffies + bpdu->message_age;
 
 	mod_timer(&p->message_age_timer, jiffies
 		  + (p->br->max_age - bpdu->message_age));

[14/50] davinci: DM365 EVM: fix video input mux bits

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Jon Povey <jon.povey@racelogic.co.uk>

commit 9daedd833a38edd90cf7baa1b1fcf61c3a0721e3 upstream.

Video input mux settings for tvp7002 and imager inputs were swapped.
Comment was correct.

Tested on EVM with tvp7002 input.

Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk>
Acked-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/arm/mach-davinci/board-dm365-evm.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -453,7 +453,7 @@ fail:
 	 */
 	if (have_imager()) {
 		label = "HD imager";
-		mux |= 1;
+		mux |= 2;
 
 		/* externally mux MMC1/ENET/AIC33 to imager */
 		mux |= BIT(6) | BIT(5) | BIT(3);
@@ -474,7 +474,7 @@ fail:
 		resets &= ~BIT(1);
 
 		if (have_tvp7002()) {
-			mux |= 2;
+			mux |= 1;
 			resets &= ~BIT(2);
 			label = "tvp7002 HD";
 		} else {

[15/50] libata: fix unexpectedly frozen port after ata_eh_reset()

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Tejun Heo <tj@kernel.org>

commit 8c56cacc724c7650b893d43068fa66044aa29a61 upstream.

To work around controllers which can't properly plug events while
reset, ata_eh_reset() clears error states and ATA_PFLAG_EH_PENDING
after reset but before RESET is marked done.  As reset is the final
recovery action and full verification of devices including onlineness
and classfication match is done afterwards, this shouldn't lead to
lost devices or missed hotplug events.

Unfortunately, it forgot to thaw the port when clearing EH_PENDING, so
if the condition happens after resetting an empty port, the port could
be left frozen and EH will end without thawing it, making the port
unresponsive to further hotplug events.

Thaw if the port is frozen after clearing EH_PENDING.  This problem is
reported by Bruce Stenning in the following thread.

 http://thread.gmane.org/gmane.linux.kernel/1123265

stable: I think we should weather this patch a bit longer in -rcX
	before sending it to -stable.  Please wait at least a month
	after this patch makes upstream.  Thanks.

-v2: Fixed spelling in the comment per Dave Howorth.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Bruce Stenning <b.stenning@indigovision.com>
Cc: Dave Howorth <dhoworth@mrc-lmb.cam.ac.uk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/ata/libata-eh.c |   12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2716,10 +2716,11 @@ int ata_eh_reset(struct ata_link *link,
 	}
 
 	/*
-	 * Some controllers can't be frozen very well and may set
-	 * spuruious error conditions during reset.  Clear accumulated
-	 * error information.  As reset is the final recovery action,
-	 * nothing is lost by doing this.
+	 * Some controllers can't be frozen very well and may set spurious
+	 * error conditions during reset.  Clear accumulated error
+	 * information and re-thaw the port if frozen.  As reset is the
+	 * final recovery action and we cross check link onlineness against
+	 * device classification later, no hotplug event is lost by this.
 	 */
 	spin_lock_irqsave(link->ap->lock, flags);
 	memset(&link->eh_info, 0, sizeof(link->eh_info));
@@ -2728,6 +2729,9 @@ int ata_eh_reset(struct ata_link *link,
 	ap->pflags &= ~ATA_PFLAG_EH_PENDING;
 	spin_unlock_irqrestore(link->ap->lock, flags);
 
+	if (ap->pflags & ATA_PFLAG_FROZEN)
+		ata_eh_thaw_port(ap);
+
 	/*
 	 * Make sure onlineness and classification result correspond.
 	 * Hotplug could have happened during reset and some

[16/50] x86: Make Dell Latitude E5420 use reboot=pci

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Daniel J Blueman <daniel.blueman@gmail.com>

commit b7798d28ec15d20fd34b70fa57eb13f0cf6d1ecd upstream.

Rebooting on the Dell E5420 often hangs with the keyboard or ACPI
methods, but is reliable via the PCI method.

[ hpa: this was deferred because we believed for a long time that the
  recent reshuffling of the boot priorities in commit
  660e34cebf0a11d54f2d5dd8838607452355f321 fixed this platform.
  Unfortunately that turned out to be incorrect. ]

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Link: http://lkml.kernel.org/r/1305248699-2347-1-git-send-email-daniel.blueman@gmail.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/x86/kernel/reboot.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -469,6 +469,14 @@ static struct dmi_system_id __initdata p
 			DMI_MATCH(DMI_PRODUCT_NAME, "iMac9,1"),
 		},
 	},
+	{	/* Handle problems with rebooting on the Latitude E5420. */
+		.callback = set_pci_reboot,
+		.ident = "Dell Latitude E5420",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E5420"),
+		},
+	},
 	{ }
 };
 

[17/50] gro: Only reset frag0 when skb can be pulled

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Herbert Xu <herbert@gondor.apana.org.au>

commit 17dd759c67f21e34f2156abcf415e1f60605a188 upstream.

Currently skb_gro_header_slow unconditionally resets frag0 and
frag0_len.  However, when we can't pull on the skb this leaves
the GRO fields in an inconsistent state.

This patch fixes this by only resetting those fields after the
pskb_may_pull test.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 include/linux/netdevice.h |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1226,9 +1226,12 @@ static inline int skb_gro_header_hard(st
 static inline void *skb_gro_header_slow(struct sk_buff *skb, unsigned int hlen,
 					unsigned int offset)
 {
+	if (!pskb_may_pull(skb, hlen))
+		return NULL;
+
 	NAPI_GRO_CB(skb)->frag0 = NULL;
 	NAPI_GRO_CB(skb)->frag0_len = 0;
-	return pskb_may_pull(skb, hlen) ? skb->data + offset : NULL;
+	return skb->data + offset;
 }
 
 static inline void *skb_gro_mac_header(struct sk_buff *skb)

[18/50] staging: comedi: fix infoleak to userspace

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Vasiliy Kulikov <segoon@openwall.com>

commit 819cbb120eaec7e014e5abd029260db1ca8c5735 upstream.

driver_name and board_name are pointers to strings, not buffers of size
COMEDI_NAMELEN.  Copying COMEDI_NAMELEN bytes of a string containing
less than COMEDI_NAMELEN-1 bytes would leak some unrelated bytes.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/staging/comedi/comedi_fops.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -362,8 +362,8 @@ static int do_devinfo_ioctl(struct comed
 	/* fill devinfo structure */
 	devinfo.version_code = COMEDI_VERSION_CODE;
 	devinfo.n_subdevs = dev->n_subdevices;
-	memcpy(devinfo.driver_name, dev->driver->driver_name, COMEDI_NAMELEN);
-	memcpy(devinfo.board_name, dev->board_name, COMEDI_NAMELEN);
+	strlcpy(devinfo.driver_name, dev->driver->driver_name, COMEDI_NAMELEN);
+	strlcpy(devinfo.board_name, dev->board_name, COMEDI_NAMELEN);
 
 	if (read_subdev)
 		devinfo.read_subdevice = read_subdev - dev->subdevices;

[19/50] usb: musb: restore INDEX register in resume path

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Ajay Kumar Gupta <ajay.gupta@ti.com>

commit 3c5fec75e121b21a2eb35e5a6b44291509abba6f upstream.

Restoring the missing INDEX register value in musb_restore_context().
Without this suspend resume functionality is broken with offmode
enabled.

Acked-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/musb/musb_core.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1640,6 +1640,7 @@ void musb_dma_completion(struct musb *mu
 			}
 		}
 	}
+	musb_writeb(musb_base, MUSB_INDEX, musb->context.index);
 }
 
 #else

[20/50] USB: dummy-hcd needs the has_tt flag

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Alan Stern <stern@rowland.harvard.edu>

commit c5c69f3f0dcf9b569c8f3ad67f3af92cfcedac43 upstream.

Like with other host controllers capable of operating at both high
speed and full speed, we need to indicate that the emulated controller
presented by dummy-hcd has this ability.  Otherwise usbcore will not
accept full-speed gadgets under dummy-hcd.  This patch (as1469) sets
the appropriate has_tt flag.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/gadget/dummy_hcd.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -1886,6 +1886,7 @@ static int dummy_hcd_probe(struct platfo
 	if (!hcd)
 		return -ENOMEM;
 	the_controller = hcd_to_dummy (hcd);
+	hcd->has_tt = 1;
 
 	retval = usb_add_hcd(hcd, 0, 0);
 	if (retval != 0) {

[21/50] ARM: pxa/cm-x300: fix V3020 RTC functionality

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Igor Grinberg <grinberg@compulab.co.il>

commit 6c7b3ea52e345ab614edb91d3f0e9f3bb3713871 upstream.

While in sleep mode the CS# and other V3020 RTC GPIOs must be driven
high, otherwise V3020 RTC fails to keep the right time in sleep mode.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/arm/mach-pxa/cm-x300.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -154,10 +154,10 @@ static mfp_cfg_t cm_x3xx_mfp_cfg[] __ini
 	GPIO99_GPIO,			/* Ethernet IRQ */
 
 	/* RTC GPIOs */
-	GPIO95_GPIO,			/* RTC CS */
-	GPIO96_GPIO,			/* RTC WR */
-	GPIO97_GPIO,			/* RTC RD */
-	GPIO98_GPIO,			/* RTC IO */
+	GPIO95_GPIO | MFP_LPM_DRIVE_HIGH,	/* RTC CS */
+	GPIO96_GPIO | MFP_LPM_DRIVE_HIGH,	/* RTC WR */
+	GPIO97_GPIO | MFP_LPM_DRIVE_HIGH,	/* RTC RD */
+	GPIO98_GPIO,				/* RTC IO */
 
 	/* Standard I2C */
 	GPIO21_I2C_SCL,

[22/50] jme: Fix unmap error (Causing system freeze)

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Guo-Fu Tseng <cooldavid@cooldavid.org>

commit 94c5b41b327e08de0ddf563237855f55080652a1 upstream.

This patch add the missing dma_unmap().
Which solved the critical issue of system freeze on heavy load.

Michal Miroslaw's rejected patch:
[PATCH v2 10/46] net: jme: convert to generic DMA API
Pointed out the issue also, thank you Michal.
But the fix was incorrect. It would unmap needed address
when low memory.

Got lots of feedback from End user and Gentoo Bugzilla.
https://bugs.gentoo.org/show_bug.cgi?id=373109
Thank you all. :)

Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/net/jme.c |   20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

--- a/drivers/net/jme.c
+++ b/drivers/net/jme.c
@@ -681,20 +681,28 @@ jme_make_new_rx_buf(struct jme_adapter *
 	struct jme_ring *rxring = &(jme->rxring[0]);
 	struct jme_buffer_info *rxbi = rxring->bufinf + i;
 	struct sk_buff *skb;
+	dma_addr_t mapping;
 
 	skb = netdev_alloc_skb(jme->dev,
 		jme->dev->mtu + RX_EXTRA_LEN);
 	if (unlikely(!skb))
 		return -ENOMEM;
 
+	mapping = pci_map_page(jme->pdev, virt_to_page(skb->data),
+			       offset_in_page(skb->data), skb_tailroom(skb),
+			       PCI_DMA_FROMDEVICE);
+	if (unlikely(pci_dma_mapping_error(jme->pdev, mapping))) {
+		dev_kfree_skb(skb);
+		return -ENOMEM;
+	}
+
+	if (likely(rxbi->mapping))
+		pci_unmap_page(jme->pdev, rxbi->mapping,
+			       rxbi->len, PCI_DMA_FROMDEVICE);
+
 	rxbi->skb = skb;
 	rxbi->len = skb_tailroom(skb);
-	rxbi->mapping = pci_map_page(jme->pdev,
-					virt_to_page(skb->data),
-					offset_in_page(skb->data),
-					rxbi->len,
-					PCI_DMA_FROMDEVICE);
-
+	rxbi->mapping = mapping;
 	return 0;
 }
 

[23/50] [SCSI] libsas: remove expander from dev list on error

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Luben Tuikov <ltuikov@yahoo.com>

commit 5911e963d3718e306bcac387b83e259aa4228896 upstream.

If expander discovery fails (sas_discover_expander()), remove the
expander from the port device list (sas_ex_discover_expander()),
before freeing it. Else the list is corrupted and, e.g., when we
attempt to send SMP commands to other devices, the kernel oopses.

Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Reviewed-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/scsi/libsas/sas_expander.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -840,6 +840,9 @@ static struct domain_device *sas_ex_disc
 
 	res = sas_discover_expander(child);
 	if (res) {
+		spin_lock_irq(&parent->port->dev_list_lock);
+		list_del(&child->dev_list_node);
+		spin_unlock_irq(&parent->port->dev_list_lock);
 		kfree(child);
 		return NULL;
 	}

[24/50] mac80211: Restart STA timers only on associated state

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>

commit 676b58c27475a9defccc025fea1cbd2b141ee539 upstream.

A panic was observed when the device is failed to resume properly,
and there are no running interfaces. ieee80211_reconfig tries
to restart STA timers on unassociated state.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 net/mac80211/mlme.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -2318,6 +2318,9 @@ void ieee80211_sta_restart(struct ieee80
 {
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 
+	if (!ifmgd->associated)
+		return;
+
 	if (test_and_clear_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running))
 		add_timer(&ifmgd->timer);
 	if (test_and_clear_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running))

[25/50] [SCSI] Blacklist Traxdata CDR4120 and IOMEGA Zip drive to avoid lock ups.

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Werner Fink <werner@novell.com>

commit 82103978189e9731658cd32da5eb85ab7b8542b8 upstream.

This patch resulted from the discussion at
https://bugzilla.novell.com/show_bug.cgi?id=679277,
https://bugzilla.novell.com/show_bug.cgi?id=681840 .

Signed-off-by: Werner Fink <werner@novell.com>
Signed-off-by: Ankit Jain <jankit@suse.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/scsi/scsi_devinfo.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -196,6 +196,7 @@ static struct {
 	{"IBM", "ProFibre 4000R", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
 	{"IBM", "2105", NULL, BLIST_RETRY_HWERROR},
 	{"iomega", "jaz 1GB", "J.86", BLIST_NOTQ | BLIST_NOLUN},
+	{"IOMEGA", "ZIP", NULL, BLIST_NOTQ | BLIST_NOLUN},
 	{"IOMEGA", "Io20S         *F", NULL, BLIST_KEY},
 	{"INSITE", "Floptical   F*8I", NULL, BLIST_KEY},
 	{"INSITE", "I325VM", NULL, BLIST_KEY},
@@ -242,6 +243,7 @@ static struct {
 	{"Tornado-", "F4", "*", BLIST_NOREPORTLUN},
 	{"TOSHIBA", "CDROM", NULL, BLIST_ISROM},
 	{"TOSHIBA", "CD-ROM", NULL, BLIST_ISROM},
+	{"Traxdata", "CDR4120", NULL, BLIST_NOLUN},	/* locks up */
 	{"USB2.0", "SMARTMEDIA/XD", NULL, BLIST_FORCELUN | BLIST_INQUIRY_36},
 	{"WangDAT", "Model 2600", "01.7", BLIST_SELECT_NO_ATN},
 	{"WangDAT", "Model 3200", "02.2", BLIST_SELECT_NO_ATN},

[26/50] [SCSI] ses: requesting a fault indication

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Douglas Gilbert <dgilbert@interlog.com>

commit 2a350cab9daf9a46322d83b091bb05cf54ccf6ab upstream.

Noticed that when the sysfs interface of the SCSI SES
driver was used to request a fault indication the LED
flashed but the buzzer didn't sound. So it was doing
what REQUEST IDENT (locate) should do.

Changelog:
   - fix the setting of REQUEST FAULT for the device slot
     and array device slot elements in the enclosure control
     diagnostic page
   - note the potentially defective code that reads the
     FAULT SENSED and FAULT REQUESTED bits from the enclosure
     status diagnostic page

The attached patch is against git/scsi-misc-2.6

Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/scsi/ses.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -157,6 +157,10 @@ static unsigned char *ses_get_page2_desc
 	return NULL;
 }
 
+/* For device slot and array device slot elements, byte 3 bit 6
+ * is "fault sensed" while byte 3 bit 5 is "fault reqstd". As this
+ * code stands these bits are shifted 4 positions right so in
+ * sysfs they will appear as bits 2 and 1 respectively. Strange. */
 static void ses_get_fault(struct enclosure_device *edev,
 			  struct enclosure_component *ecomp)
 {
@@ -178,7 +182,7 @@ static int ses_set_fault(struct enclosur
 		/* zero is disabled */
 		break;
 	case ENCLOSURE_SETTING_ENABLED:
-		desc[2] = 0x02;
+		desc[3] = 0x20;
 		break;
 	default:
 		/* SES doesn't do the SGPIO blink settings */

[27/50] [SCSI] fix crash in scsi_dispatch_cmd()

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: James Bottomley <James.Bottomley@HansenPartnership.com>

commit bfe159a51203c15d23cb3158fffdc25ec4b4dda1 upstream.

USB surprise removal of sr is triggering an oops in
scsi_dispatch_command().  What seems to be happening is that USB is
hanging on to a queue reference until the last close of the upper
device, so the crash is caused by surprise remove of a mounted CD
followed by attempted unmount.

The problem is that USB doesn't issue its final commands as part of
the SCSI teardown path, but on last close when the block queue is long
gone.  The long term fix is probably to make sr do the teardown in the
same way as sd (so remove all the lower bits on ejection, but keep the
upper disk alive until last close of user space).  However, the
current oops can be simply fixed by not allowing any commands to be
sent to a dead queue.

Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 block/blk-core.c        |    3 +++
 block/blk-exec.c        |    7 +++++++
 drivers/scsi/scsi_lib.c |    2 ++
 3 files changed, 12 insertions(+)

--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -865,6 +865,9 @@ struct request *blk_get_request(struct r
 {
 	struct request *rq;
 
+	if (unlikely(test_bit(QUEUE_FLAG_DEAD, &q->queue_flags)))
+		return NULL;
+
 	BUG_ON(rw != READ && rw != WRITE);
 
 	spin_lock_irq(q->queue_lock);
--- a/block/blk-exec.c
+++ b/block/blk-exec.c
@@ -50,6 +50,13 @@ void blk_execute_rq_nowait(struct reques
 {
 	int where = at_head ? ELEVATOR_INSERT_FRONT : ELEVATOR_INSERT_BACK;
 
+	if (unlikely(test_bit(QUEUE_FLAG_DEAD, &q->queue_flags))) {
+		rq->errors = -ENXIO;
+		if (rq->end_io)
+			rq->end_io(rq, rq->errors);
+		return;
+	}
+
 	rq->rq_disk = bd_disk;
 	rq->end_io = done;
 	WARN_ON(irqs_disabled());
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -215,6 +215,8 @@ int scsi_execute(struct scsi_device *sde
 	int ret = DRIVER_ERROR << 24;
 
 	req = blk_get_request(sdev->request_queue, write, __GFP_WAIT);
+	if (!req)
+		return ret;
 
 	if (bufflen &&	blk_rq_map_kern(sdev->request_queue, req,
 					buffer, bufflen, __GFP_WAIT))

[28/50] [SCSI] pmcraid: reject negative request size

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Dan Rosenberg <drosenberg@vsecurity.com>

commit b5b515445f4f5a905c5dd27e6e682868ccd6c09d upstream.

There's a code path in pmcraid that can be reached via device ioctl that
causes all sorts of ugliness, including heap corruption or triggering the
OOM killer due to consecutive allocation of large numbers of pages.

First, the user can call pmcraid_chr_ioctl(), with a type
PMCRAID_PASSTHROUGH_IOCTL.  This calls through to
pmcraid_ioctl_passthrough().  Next, a pmcraid_passthrough_ioctl_buffer
is copied in, and the request_size variable is set to
buffer->ioarcb.data_transfer_length, which is an arbitrary 32-bit
signed value provided by the user.  If a negative value is provided
here, bad things can happen.  For example,
pmcraid_build_passthrough_ioadls() is called with this request_size,
which immediately calls pmcraid_alloc_sglist() with a negative size.
The resulting math on allocating a scatter list can result in an
overflow in the kzalloc() call (if num_elem is 0, the sglist will be
smaller than expected), or if num_elem is unexpectedly large the
subsequent loop will call alloc_pages() repeatedly, a high number of
pages will be allocated and the OOM killer might be invoked.

It looks like preventing this value from being negative in
pmcraid_ioctl_passthrough() would be sufficient.

Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/scsi/pmcraid.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -3576,6 +3576,9 @@ static long pmcraid_ioctl_passthrough(
 			pmcraid_err("couldn't build passthrough ioadls\n");
 			goto out_free_buffer;
 		}
+	} else if (request_size < 0) {
+		rc = -EINVAL;
+		goto out_free_buffer;
 	}
 
 	/* If data is being written into the device, copy the data from user

[29/50] kexec, x86: Fix incorrect jump back address if not

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------
 preserving context

From: Huang Ying <ying.huang@intel.com>

commit 050438ed5a05b25cdf287f5691e56a58c2606997 upstream.

In kexec jump support, jump back address passed to the kexeced
kernel via function calling ABI, that is, the function call
return address is the jump back entry.

Furthermore, jump back entry == 0 should be used to signal that
the jump back or preserve context is not enabled in the original
kernel.

But in the current implementation the stack position used for
function call return address is not cleared context
preservation is disabled. The patch fixes this bug.

Reported-and-tested-by: Yin Kangkai <kangkai.yin@intel.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Link: http://lkml.kernel.org/r/1310607277-25029-1-git-send-email-ying.huang@intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/x86/kernel/relocate_kernel_32.S |    2 ++
 arch/x86/kernel/relocate_kernel_64.S |    2 ++
 2 files changed, 4 insertions(+)

--- a/arch/x86/kernel/relocate_kernel_32.S
+++ b/arch/x86/kernel/relocate_kernel_32.S
@@ -97,6 +97,8 @@ relocate_kernel:
 	ret
 
 identity_mapped:
+	/* set return address to 0 if not preserving context */
+	pushl	$0
 	/* store the start address on the stack */
 	pushl   %edx
 
--- a/arch/x86/kernel/relocate_kernel_64.S
+++ b/arch/x86/kernel/relocate_kernel_64.S
@@ -100,6 +100,8 @@ relocate_kernel:
 	ret
 
 identity_mapped:
+	/* set return address to 0 if not preserving context */
+	pushq	$0
 	/* store the start address on the stack */
 	pushq   %rdx
 

[30/50] powerpc/kdump: Fix timeout in crash_kexec_wait_realmode

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Michael Neuling <mikey@neuling.org>

commit 63f21a56f1cc0b800a4c00349c59448f82473d19 upstream.

The existing code it pretty ugly.  How about we clean it up even more
like this?

From: Anton Blanchard <anton@samba.org>

We check for timeout expiry in the outer loop, but we also need to
check it in the inner loop or we can lock up forever waiting for a
CPU to hit real mode.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/powerpc/kernel/crash.c |    6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -176,12 +176,8 @@ static void crash_kexec_wait_realmode(in
 
 		while (paca[i].kexec_state < KEXEC_STATE_REAL_MODE) {
 			barrier();
-			if (!cpu_possible(i)) {
+			if (!cpu_possible(i) || !cpu_online(i) || (msecs <= 0))
 				break;
-			}
-			if (!cpu_online(i)) {
-				break;
-			}
 			msecs--;
 			mdelay(1);
 		}

[31/50] PCI: ARI is a PCIe v2 feature

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Chris Wright <chrisw@sous-sol.org>

commit 864d296cf948aef0fa32b81407541572583f7572 upstream.

The function pci_enable_ari() may mistakenly set the downstream port
of a v1 PCIe switch in ARI Forwarding mode.  This is a PCIe v2 feature,
and with an SR-IOV device on that switch port believing the switch above
is ARI capable it may attempt to use functions 8-255, translating into
invalid (non-zero) device numbers for that bus.  This has been seen
to cause Completion Timeouts and general misbehaviour including hangs
and panics.

Acked-by: Don Dutile <ddutile@redhat.com>
Tested-by: Don Dutile <ddutile@redhat.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/pci/pci.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1528,7 +1528,7 @@ void pci_enable_ari(struct pci_dev *dev)
 {
 	int pos;
 	u32 cap;
-	u16 ctrl;
+	u16 flags, ctrl;
 	struct pci_dev *bridge;
 
 	if (!pci_is_pcie(dev) || dev->devfn)
@@ -1546,6 +1546,11 @@ void pci_enable_ari(struct pci_dev *dev)
 	if (!pos)
 		return;
 
+	/* ARI is a PCIe v2 feature */
+	pci_read_config_word(bridge, pos + PCI_EXP_FLAGS, &flags);
+	if ((flags & PCI_EXP_FLAGS_VERS) < 2)
+		return;
+
 	pci_read_config_dword(bridge, pos + PCI_EXP_DEVCAP2, &cap);
 	if (!(cap & PCI_EXP_DEVCAP2_ARI))
 		return;

[32/50] cciss: do not attempt to read from a write-only register

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>

commit 07d0c38e7d84f911c72058a124c7f17b3c779a65 upstream.

Most smartarrays will tolerate it, but some new ones don't.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>

Note: this is a regression caused by commit 1ddd5049
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/block/cciss.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/block/cciss.h
+++ b/drivers/block/cciss.h
@@ -181,7 +181,7 @@ static void SA5_submit_command( ctlr_inf
 	 printk("Sending %x - down to controller\n", c->busaddr );
 #endif /* CCISS_DEBUG */ 
          writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
-	readl(h->vaddr + SA5_REQUEST_PORT_OFFSET);
+	readl(h->vaddr + SA5_SCRATCHPAD_OFFSET);
 	 h->commands_outstanding++;
 	 if ( h->commands_outstanding > h->max_outstanding)
 		h->max_outstanding = h->commands_outstanding;

[33/50] geode: reflect mfgpt dependency on mfd

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: "Philip A. Prindeville" <philipp@redfish-solutions.com>

commit 703f03c896fdbd726b809066ae279df513992f0e upstream.

As stated in drivers/mfd/cs5535-mfd.c, the mfd driver exposes the BARs
which then make the GPIO, MFGPT, ACPI, etc.  all visible to the system.

So the dependencies of the MFGPT stuff have changed, and most people
expect Kconfig to bring in the necessary dependencies.  Without them, the
module fails to load and most people don't understand why because the
details of the rewrite aren't captured anywhere most people who know to
look.

This dependency needs to be reflected in Kconfig.

Signed-off-by: Philip A. Prindeville <philipp@redfish-solutions.com>
Acked-by: Alexandros C. Couloumbis <alex@ozo.com>
Acked-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/misc/Kconfig |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -189,8 +189,7 @@ config SGI_XP
 
 config CS5535_MFGPT
 	tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support"
-	depends on PCI
-	depends on X86
+	depends on PCI && X86 && MFD_CS5535
 	default n
 	help
 	  This driver provides access to MFGPT functionality for other

[34/50] xtensa: prevent arbitrary read in ptrace

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Dan Rosenberg <drosenberg@vsecurity.com>

commit 0d0138ebe24b94065580bd2601f8bb7eb6152f56 upstream.

Prevent an arbitrary kernel read.  Check the user pointer with access_ok()
before copying data in.

[akpm@linux-foundation.org: s/EIO/EFAULT/]
Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Cc: Christian Zankel <chris@zankel.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/xtensa/kernel/ptrace.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/arch/xtensa/kernel/ptrace.c
+++ b/arch/xtensa/kernel/ptrace.c
@@ -136,6 +136,9 @@ int ptrace_setxregs(struct task_struct *
 	elf_xtregs_t *xtregs = uregs;
 	int ret = 0;
 
+	if (!access_ok(VERIFY_READ, uregs, sizeof(elf_xtregs_t)))
+		return -EFAULT;
+
 #if XTENSA_HAVE_COPROCESSORS
 	/* Flush all coprocessors before we overwrite them. */
 	coprocessor_flush_all(ti);

[35/50] ext3: Fix oops in ext3_try_to_allocate_with_rsv()

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Jan Kara <jack@suse.cz>

commit ad95c5e9bc8b5885f94dce720137cac8fa8da4c9 upstream.

Block allocation is called from two places: ext3_get_blocks_handle() and
ext3_xattr_block_set(). These two callers are not necessarily synchronized
because xattr code holds only xattr_sem and i_mutex, and
ext3_get_blocks_handle() may hold only truncate_mutex when called from
writepage() path. Block reservation code does not expect two concurrent
allocations to happen to the same inode and thus assertions can be triggered
or reservation structure corruption can occur.

Fix the problem by taking truncate_mutex in xattr code to serialize
allocations.

CC: Sage Weil <sage@newdream.net>
Reported-by: Fyodor Ustinov <ufm@ufm.su>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 fs/ext3/xattr.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

--- a/fs/ext3/xattr.c
+++ b/fs/ext3/xattr.c
@@ -803,8 +803,16 @@ inserted:
 			/* We need to allocate a new block */
 			ext3_fsblk_t goal = ext3_group_first_block_no(sb,
 						EXT3_I(inode)->i_block_group);
-			ext3_fsblk_t block = ext3_new_block(handle, inode,
-							goal, &error);
+			ext3_fsblk_t block;
+
+			/*
+			 * Protect us agaist concurrent allocations to the
+			 * same inode from ext3_..._writepage(). Reservation
+			 * code does not expect racing allocations.
+			 */
+			mutex_lock(&EXT3_I(inode)->truncate_mutex);
+			block = ext3_new_block(handle, inode, goal, &error);
+			mutex_unlock(&EXT3_I(inode)->truncate_mutex);
 			if (error)
 				goto cleanup;
 			ea_idebug(inode, "creating block %d", block);

[36/50] svcrpc: fix list-corrupting race on nfsd shutdown

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: "J. Bruce Fields" <bfields@redhat.com>

commit ebc63e531cc6a457595dd110b07ac530eae788c3 upstream.

After commit 3262c816a3d7fb1eaabce633caa317887ed549ae "[PATCH] knfsd:
split svc_serv into pools", svc_delete_xprt (then svc_delete_socket) no
longer removed its xpt_ready (then sk_ready) field from whatever list it
was on, noting that there was no point since the whole list was about to
be destroyed anyway.

That was mostly true, but forgot that a few svc_xprt_enqueue()'s might
still be hanging around playing with the about-to-be-destroyed list, and
could get themselves into trouble writing to freed memory if we left
this xprt on the list after freeing it.

(This is actually functionally identical to a patch made first by Ben
Greear, but with more comments.)

Cc: gnb@fmeh.org
Reported-by: Ben Greear <greearb@candelatech.com>
Tested-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 net/sunrpc/svc_xprt.c |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -884,12 +884,13 @@ void svc_delete_xprt(struct svc_xprt *xp
 	if (!test_and_set_bit(XPT_DETACHED, &xprt->xpt_flags))
 		list_del_init(&xprt->xpt_list);
 	/*
-	 * We used to delete the transport from whichever list
-	 * it's sk_xprt.xpt_ready node was on, but we don't actually
-	 * need to.  This is because the only time we're called
-	 * while still attached to a queue, the queue itself
-	 * is about to be destroyed (in svc_destroy).
+	 * The only time we're called while xpt_ready is still on a list
+	 * is while the list itself is about to be destroyed (in
+	 * svc_destroy).  BUT svc_xprt_enqueue could still be attempting
+	 * to add new entries to the sp_sockets list, so we can't leave
+	 * a freed xprt on it.
 	 */
+	list_del_init(&xprt->xpt_ready);
 	if (test_bit(XPT_TEMP, &xprt->xpt_flags))
 		serv->sv_tmpcnt--;
 

[37/50] EHCI: only power off port if over-current is active

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Sergei Shtylyov <sshtylyov@ru.mvista.com>

commit 81463c1d707186adbbe534016cd1249edeab0dac upstream.

MAX4967 USB power supply chip we use on our boards signals over-current when
power is not enabled; once it's enabled, over-current signal returns to normal.
That unfortunately caused the endless stream of "over-current change on port"
messages. The EHCI root hub code reacts on every over-current signal change
with powering off the port -- such change event is generated the moment the
port power is enabled, so once enabled the power is immediately cut off.
I think we should only cut off power when we're seeing the active over-current
signal, so I'm adding such check to that code. I also think that the fact that
we've cut off the port power should be reflected in the result of GetPortStatus
request immediately, hence I'm adding a PORTSCn register readback after write...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/host/ehci-hub.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -760,10 +760,11 @@ static int ehci_hub_control (
 			 * power switching; they're allowed to just limit the
 			 * current.  khubd will turn the power back on.
 			 */
-			if (HCS_PPC (ehci->hcs_params)){
+			if ((temp & PORT_OC) && HCS_PPC(ehci->hcs_params)) {
 				ehci_writel(ehci,
 					temp & ~(PORT_RWC_BITS | PORT_POWER),
 					status_reg);
+				temp = ehci_readl(ehci, status_reg);
 			}
 		}
 

[38/50] EHCI: fix direction handling for interrupt data toggles

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Alan Stern <stern@rowland.harvard.edu>

commit e04f5f7e423018bcec84c11af2058cdce87816f3 upstream.

This patch (as1480) fixes a rather obscure bug in ehci-hcd.  The
qh_update() routine needs to know the number and direction of the
endpoint corresponding to its QH argument.  The number can be taken
directly from the QH data structure, but the direction isn't stored
there.  The direction is taken instead from the first qTD linked to
the QH.

However, it turns out that for interrupt transfers, qh_update() gets
called before the qTDs are linked to the QH.  As a result, qh_update()
computes a bogus direction value, which messes up the endpoint toggle
handling.  Under the right combination of circumstances this causes
usb_reset_endpoint() not to work correctly, which causes packets to be
dropped and communications to fail.

Now, it's silly for the QH structure not to have direct access to all
the descriptor information for the corresponding endpoint.  Ultimately
it may get a pointer to the usb_host_endpoint structure; for now,
adding a copy of the direction flag solves the immediate problem.

This allows the Spyder2 color-calibration system (a low-speed USB
device that sends all its interrupt data packets with the toggle set
to 0 and hance requires constant use of usb_reset_endpoint) to work
when connected through a high-speed hub.  Thanks to Graeme Gill for
supplying the hardware that allowed me to track down this bug.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Graeme Gill <graeme@argyllcms.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/host/ehci-q.c |    3 ++-
 drivers/usb/host/ehci.h   |    1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -103,7 +103,7 @@ qh_update (struct ehci_hcd *ehci, struct
 	if (!(hw->hw_info1 & cpu_to_hc32(ehci, 1 << 14))) {
 		unsigned	is_out, epnum;
 
-		is_out = !(qtd->hw_token & cpu_to_hc32(ehci, 1 << 8));
+		is_out = qh->is_out;
 		epnum = (hc32_to_cpup(ehci, &hw->hw_info1) >> 8) & 0x0f;
 		if (unlikely (!usb_gettoggle (qh->dev, epnum, is_out))) {
 			hw->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE);
@@ -945,6 +945,7 @@ done:
 	hw = qh->hw;
 	hw->hw_info1 = cpu_to_hc32(ehci, info1);
 	hw->hw_info2 = cpu_to_hc32(ehci, info2);
+	qh->is_out = !is_input;
 	usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe), !is_input, 1);
 	qh_refresh (ehci, qh);
 	return qh;
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -365,6 +365,7 @@ struct ehci_qh {
 #define NO_FRAME ((unsigned short)~0)			/* pick new start */
 
 	struct usb_device	*dev;		/* access to TT */
+	unsigned		is_out:1;	/* bulk or intr OUT */
 	unsigned		clearing_tt:1;	/* Clear-TT-Buf in progress */
 };
 

[39/50] powerpc/pseries/hvconsole: Fix dropped console output

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Anton Blanchard <anton@samba.org>

commit 51d33021425e1f905beb4208823146f2fb6517da upstream.

Return -EAGAIN when we get H_BUSY back from the hypervisor. This
makes the hvc console driver retry, avoiding dropped printks.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/powerpc/platforms/pseries/hvconsole.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/powerpc/platforms/pseries/hvconsole.c
+++ b/arch/powerpc/platforms/pseries/hvconsole.c
@@ -73,7 +73,7 @@ int hvc_put_chars(uint32_t vtermno, cons
 	if (ret == H_SUCCESS)
 		return count;
 	if (ret == H_BUSY)
-		return 0;
+		return -EAGAIN;
 	return -EIO;
 }
 

[40/50] x86: Hpet: Avoid the comparator readback penalty

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------


From: Thomas Gleixner <tglx@linutronix.de>

(imported from commit v2.6.36-rc4-167-g995bd3b)

Due to the overly intelligent design of HPETs, we need to workaround
the problem that the compare value which we write is already behind
the actual counter value at the point where the value hits the real
compare register. This happens for two reasons:

1) We read out the counter, add the delta and write the result to the
   compare register. When a NMI or SMI hits between the read out and
   the write then the counter can be ahead of the event already

2) The write to the compare register is delayed by up to two HPET
   cycles in certain chipsets.

We worked around this by reading back the compare register to make
sure that the written value has hit the hardware. For certain ICH9+
chipsets this can require two readouts, as the first one can return
the previous compare register value. That's bad performance wise for
the normal case where the event is far enough in the future.

As we already know that the write can be delayed by up to two cycles
we can avoid the read back of the compare register completely if we
make the decision whether the delta has elapsed already or not based
on the following calculation:

  cmp = event - actual_count;

If cmp is less than 8 HPET clock cycles, then we decide that the event
has happened already and return -ETIME. That covers the above #1 and
#2 problems which would cause a wait for HPET wraparound (~306
seconds).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nix <nix@esperi.org.uk>
Tested-by: Artur Skawina <art.08.09@gmail.com>
Cc: Damien Wyart <damien.wyart@free.fr>
Tested-by: John Drescher <drescherjm@gmail.com>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Tested-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <alpine.LFD.2.00.1009151500060.2416@localhost6.localdomain6>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 arch/x86/kernel/hpet.c |   43 +++++++++++++++++++++----------------------
 1 file changed, 21 insertions(+), 22 deletions(-)

--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -380,36 +380,35 @@ static int hpet_next_event(unsigned long
 			   struct clock_event_device *evt, int timer)
 {
 	u32 cnt;
+	s32 res;
 
 	cnt = hpet_readl(HPET_COUNTER);
 	cnt += (u32) delta;
 	hpet_writel(cnt, HPET_Tn_CMP(timer));
 
 	/*
-	 * We need to read back the CMP register on certain HPET
-	 * implementations (ATI chipsets) which seem to delay the
-	 * transfer of the compare register into the internal compare
-	 * logic. With small deltas this might actually be too late as
-	 * the counter could already be higher than the compare value
-	 * at that point and we would wait for the next hpet interrupt
-	 * forever. We found out that reading the CMP register back
-	 * forces the transfer so we can rely on the comparison with
-	 * the counter register below. If the read back from the
-	 * compare register does not match the value we programmed
-	 * then we might have a real hardware problem. We can not do
-	 * much about it here, but at least alert the user/admin with
-	 * a prominent warning.
-	 * An erratum on some chipsets (ICH9,..), results in comparator read
-	 * immediately following a write returning old value. Workaround
-	 * for this is to read this value second time, when first
-	 * read returns old value.
+	 * HPETs are a complete disaster. The compare register is
+	 * based on a equal comparison and neither provides a less
+	 * than or equal functionality (which would require to take
+	 * the wraparound into account) nor a simple count down event
+	 * mode. Further the write to the comparator register is
+	 * delayed internally up to two HPET clock cycles in certain
+	 * chipsets (ATI, ICH9,10). We worked around that by reading
+	 * back the compare register, but that required another
+	 * workaround for ICH9,10 chips where the first readout after
+	 * write can return the old stale value. We already have a
+	 * minimum delta of 5us enforced, but a NMI or SMI hitting
+	 * between the counter readout and the comparator write can
+	 * move us behind that point easily. Now instead of reading
+	 * the compare register back several times, we make the ETIME
+	 * decision based on the following: Return ETIME if the
+	 * counter value after the write is less than 8 HPET cycles
+	 * away from the event or if the counter is already ahead of
+	 * the event.
 	 */
-	if (unlikely((u32)hpet_readl(HPET_Tn_CMP(timer)) != cnt)) {
-		WARN_ONCE(hpet_readl(HPET_Tn_CMP(timer)) != cnt,
-		  KERN_WARNING "hpet: compare register read back failed.\n");
-	}
+	res = (s32)(cnt - hpet_readl(HPET_COUNTER));
 
-	return (s32)(hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0;
+	return res < 8 ? -ETIME : 0;
 }
 
 static void hpet_legacy_set_mode(enum clock_event_mode mode,

[41/50] x86: HPET: Chose a paranoid safe value for the ETIME check

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------


From: Thomas Gleixner <tglx@linutronix.de>

(imported from commit v2.6.37-rc5-64-gf1c1807)

commit 995bd3bb5 (x86: Hpet: Avoid the comparator readback penalty)
chose 8 HPET cycles as a safe value for the ETIME check, as we had the
confirmation that the posted write to the comparator register is
delayed by two HPET clock cycles on Intel chipsets which showed
readback problems.

After that patch hit mainline we got reports from machines with newer
AMD chipsets which seem to have an even longer delay. See
http://thread.gmane.org/gmane.linux.kernel/1054283 and
http://thread.gmane.org/gmane.linux.kernel/1069458 for further
information.

Boris tried to come up with an ACPI based selection of the minimum
HPET cycles, but this failed on a couple of test machines. And of
course we did not get any useful information from the hardware folks.

For now our only option is to chose a paranoid high and safe value for
the minimum HPET cycles used by the ETIME check. Adjust the minimum ns
value for the HPET clockevent accordingly.

Reported-Bistected-and-Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <alpine.LFD.2.00.1012131222420.2653@localhost6.localdomain6>
Cc: Simon Kirby <sim@hostway.ca>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andreas Herrmann <Andreas.Herrmann3@amd.com>
Cc: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 arch/x86/kernel/hpet.c |   26 ++++++++++++++++----------
 1 file changed, 16 insertions(+), 10 deletions(-)

--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -27,6 +27,9 @@
 #define HPET_DEV_FSB_CAP		0x1000
 #define HPET_DEV_PERI_CAP		0x2000
 
+#define HPET_MIN_CYCLES			128
+#define HPET_MIN_PROG_DELTA		(HPET_MIN_CYCLES + (HPET_MIN_CYCLES >> 1))
+
 #define EVT_TO_HPET_DEV(evt) container_of(evt, struct hpet_dev, evt)
 
 /*
@@ -299,8 +302,9 @@ static void hpet_legacy_clockevent_regis
 	/* Calculate the min / max delta */
 	hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF,
 							   &hpet_clockevent);
-	/* 5 usec minimum reprogramming delta. */
-	hpet_clockevent.min_delta_ns = 5000;
+	/* Setup minimum reprogramming delta. */
+	hpet_clockevent.min_delta_ns = clockevent_delta2ns(HPET_MIN_PROG_DELTA,
+							   &hpet_clockevent);
 
 	/*
 	 * Start hpet with the boot cpu mask and make it
@@ -393,22 +397,24 @@ static int hpet_next_event(unsigned long
 	 * the wraparound into account) nor a simple count down event
 	 * mode. Further the write to the comparator register is
 	 * delayed internally up to two HPET clock cycles in certain
-	 * chipsets (ATI, ICH9,10). We worked around that by reading
-	 * back the compare register, but that required another
-	 * workaround for ICH9,10 chips where the first readout after
-	 * write can return the old stale value. We already have a
-	 * minimum delta of 5us enforced, but a NMI or SMI hitting
+	 * chipsets (ATI, ICH9,10). Some newer AMD chipsets have even
+	 * longer delays. We worked around that by reading back the
+	 * compare register, but that required another workaround for
+	 * ICH9,10 chips where the first readout after write can
+	 * return the old stale value. We already had a minimum
+	 * programming delta of 5us enforced, but a NMI or SMI hitting
 	 * between the counter readout and the comparator write can
 	 * move us behind that point easily. Now instead of reading
 	 * the compare register back several times, we make the ETIME
 	 * decision based on the following: Return ETIME if the
-	 * counter value after the write is less than 8 HPET cycles
+	 * counter value after the write is less than HPET_MIN_CYCLES
 	 * away from the event or if the counter is already ahead of
-	 * the event.
+	 * the event. The minimum programming delta for the generic
+	 * clockevents code is set to 1.5 * HPET_MIN_CYCLES.
 	 */
 	res = (s32)(cnt - hpet_readl(HPET_COUNTER));
 
-	return res < 8 ? -ETIME : 0;
+	return res < HPET_MIN_CYCLES ? -ETIME : 0;
 }
 
 static void hpet_legacy_set_mode(enum clock_event_mode mode,

[42/50] Revert "block: rescan partitions on invalidated devices on -ENOMEDIA

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------
 too"

This reverts commit 6f31747bfeb8c74e6d0a10ecef0abe2a04c5a6cb (commit
02e352287a40bd456eb78df705bf888bc3161d3f upstream)

This should have only been commited on .38 and newer, not older kernels
like this one, sorry.

Cc: Tejun Heo <tj@kernel.org>
Cc: David Zeuthen <zeuthen@gmail.com>
Cc: Martin Pitt <martin.pitt@ubuntu.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 fs/block_dev.c |   27 +++++++++------------------
 1 file changed, 9 insertions(+), 18 deletions(-)

--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -1211,7 +1211,6 @@ static int __blkdev_get(struct block_dev
 			if (!bdev->bd_part)
 				goto out_clear;
 
-			ret = 0;
 			if (disk->fops->open) {
 				ret = disk->fops->open(bdev, mode);
 				if (ret == -ERESTARTSYS) {
@@ -1227,18 +1226,9 @@ static int __blkdev_get(struct block_dev
 					mutex_unlock(&bdev->bd_mutex);
 					goto restart;
 				}
+				if (ret)
+					goto out_clear;
 			}
-			/*
-			 * If the device is invalidated, rescan partition
-			 * if open succeeded or failed with -ENOMEDIUM.
-			 * The latter is necessary to prevent ghost
-			 * partitions on a removed medium.
-			 */
-			if (bdev->bd_invalidated && (!ret || ret == -ENOMEDIUM))
-				rescan_partitions(disk, bdev);
-			if (ret)
-				goto out_clear;
-
 			if (!bdev->bd_openers) {
 				bd_set_size(bdev,(loff_t)get_capacity(disk)<<9);
 				bdi = blk_get_backing_dev_info(bdev);
@@ -1246,6 +1236,8 @@ static int __blkdev_get(struct block_dev
 					bdi = &default_backing_dev_info;
 				bdev->bd_inode->i_data.backing_dev_info = bdi;
 			}
+			if (bdev->bd_invalidated)
+				rescan_partitions(disk, bdev);
 		} else {
 			struct block_device *whole;
 			whole = bdget_disk(disk, 0);
@@ -1272,14 +1264,13 @@ static int __blkdev_get(struct block_dev
 		put_disk(disk);
 		disk = NULL;
 		if (bdev->bd_contains == bdev) {
-			ret = 0;
-			if (bdev->bd_disk->fops->open)
+			if (bdev->bd_disk->fops->open) {
 				ret = bdev->bd_disk->fops->open(bdev, mode);
-			/* the same as first opener case, read comment there */
-			if (bdev->bd_invalidated && (!ret || ret == -ENOMEDIUM))
+				if (ret)
+					goto out_unlock_bdev;
+			}
+			if (bdev->bd_invalidated)
 				rescan_partitions(bdev->bd_disk, bdev);
-			if (ret)
-				goto out_unlock_bdev;
 		}
 	}
 	bdev->bd_openers++;

[43/50] gre: fix netns vs proto registration ordering

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Alexey Dobriyan <adobriyan@gmail.com>

commit c2892f02712e9516d72841d5c019ed6916329794 upstream.

GRE protocol receive hook can be called right after protocol addition is done.
If netns stuff is not yet initialized, we're going to oops in
net_generic().

This is remotely oopsable if ip_gre is compiled as module and packet
comes at unfortunate moment of module loading.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 net/ipv4/ip_gre.c |   19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -1667,14 +1667,15 @@ static int __init ipgre_init(void)
 
 	printk(KERN_INFO "GRE over IPv4 tunneling driver\n");
 
-	if (inet_add_protocol(&ipgre_protocol, IPPROTO_GRE) < 0) {
-		printk(KERN_INFO "ipgre init: can't add protocol\n");
-		return -EAGAIN;
-	}
-
 	err = register_pernet_device(&ipgre_net_ops);
 	if (err < 0)
-		goto gen_device_failed;
+		return err;
+
+	err = inet_add_protocol(&ipgre_protocol, IPPROTO_GRE);
+	if (err < 0) {
+		printk(KERN_INFO "ipgre init: can't add protocol\n");
+		goto add_proto_failed;
+	}
 
 	err = rtnl_link_register(&ipgre_link_ops);
 	if (err < 0)
@@ -1690,9 +1691,9 @@ out:
 tap_ops_failed:
 	rtnl_link_unregister(&ipgre_link_ops);
 rtnl_link_failed:
-	unregister_pernet_device(&ipgre_net_ops);
-gen_device_failed:
 	inet_del_protocol(&ipgre_protocol, IPPROTO_GRE);
+add_proto_failed:
+	unregister_pernet_device(&ipgre_net_ops);
 	goto out;
 }
 
@@ -1700,9 +1701,9 @@ static void __exit ipgre_fini(void)
 {
 	rtnl_link_unregister(&ipgre_tap_ops);
 	rtnl_link_unregister(&ipgre_link_ops);
-	unregister_pernet_device(&ipgre_net_ops);
 	if (inet_del_protocol(&ipgre_protocol, IPPROTO_GRE) < 0)
 		printk(KERN_INFO "ipgre close: can't remove protocol\n");
+	unregister_pernet_device(&ipgre_net_ops);
 }
 
 module_init(ipgre_init);

[44/50] netns xfrm: fixup xfrm6_tunnel error propagation

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Alexey Dobriyan <adobriyan@gmail.com>

commit e924960dacdf85d118a98c7262edf2f99c3015cf upstream.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 net/ipv6/xfrm6_tunnel.c |   16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

--- a/net/ipv6/xfrm6_tunnel.c
+++ b/net/ipv6/xfrm6_tunnel.c
@@ -353,13 +353,19 @@ static struct xfrm6_tunnel xfrm46_tunnel
 
 static int __init xfrm6_tunnel_init(void)
 {
-	if (xfrm_register_type(&xfrm6_tunnel_type, AF_INET6) < 0)
+	int rv;
+
+	rv = xfrm_register_type(&xfrm6_tunnel_type, AF_INET6);
+	if (rv < 0)
 		goto err;
-	if (xfrm6_tunnel_register(&xfrm6_tunnel_handler, AF_INET6))
+	rv = xfrm6_tunnel_register(&xfrm6_tunnel_handler, AF_INET6);
+	if (rv < 0)
 		goto unreg;
-	if (xfrm6_tunnel_register(&xfrm46_tunnel_handler, AF_INET))
+	rv = xfrm6_tunnel_register(&xfrm46_tunnel_handler, AF_INET);
+	if (rv < 0)
 		goto dereg6;
-	if (xfrm6_tunnel_spi_init() < 0)
+	rv = xfrm6_tunnel_spi_init();
+	if (rv < 0)
 		goto dereg46;
 	return 0;
 
@@ -370,7 +376,7 @@ dereg6:
 unreg:
 	xfrm_unregister_type(&xfrm6_tunnel_type, AF_INET6);
 err:
-	return -EAGAIN;
+	return rv;
 }
 
 static void __exit xfrm6_tunnel_fini(void)

[45/50] alpha: fix several security issues

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Dan Rosenberg <drosenberg@vsecurity.com>

commit 21c5977a836e399fc710ff2c5367845ed5c2527f upstream.

Fix several security issues in Alpha-specific syscalls.  Untested, but
mostly trivial.

1. Signedness issue in osf_getdomainname allows copying out-of-bounds
kernel memory to userland.

2. Signedness issue in osf_sysinfo allows copying large amounts of
kernel memory to userland.

3. Typo (?) in osf_getsysinfo bounds minimum instead of maximum copy
size, allowing copying large amounts of kernel memory to userland.

4. Usage of user pointer in osf_wait4 while under KERNEL_DS allows
privilege escalation via writing return value of sys_wait4 to kernel
memory.

Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/alpha/kernel/osf_sys.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -431,7 +431,7 @@ SYSCALL_DEFINE2(osf_getdomainname, char
 		return -EFAULT;
 
 	len = namelen;
-	if (namelen > 32)
+	if (len > 32)
 		len = 32;
 
 	down_read(&uts_sem);
@@ -618,7 +618,7 @@ SYSCALL_DEFINE3(osf_sysinfo, int, comman
 	down_read(&uts_sem);
 	res = sysinfo_table[offset];
 	len = strlen(res)+1;
-	if (len > count)
+	if ((unsigned long)len > (unsigned long)count)
 		len = count;
 	if (copy_to_user(buf, res, len))
 		err = -EFAULT;
@@ -673,7 +673,7 @@ SYSCALL_DEFINE5(osf_getsysinfo, unsigned
 		return 1;
 
 	case GSI_GET_HWRPB:
-		if (nbytes < sizeof(*hwrpb))
+		if (nbytes > sizeof(*hwrpb))
 			return -EINVAL;
 		if (copy_to_user(buffer, hwrpb, nbytes) != 0)
 			return -EFAULT;
@@ -1035,6 +1035,7 @@ SYSCALL_DEFINE4(osf_wait4, pid_t, pid, i
 {
 	struct rusage r;
 	long ret, err;
+	unsigned int status = 0;
 	mm_segment_t old_fs;
 
 	if (!ur)
@@ -1043,13 +1044,15 @@ SYSCALL_DEFINE4(osf_wait4, pid_t, pid, i
 	old_fs = get_fs();
 		
 	set_fs (KERNEL_DS);
-	ret = sys_wait4(pid, ustatus, options, (struct rusage __user *) &r);
+	ret = sys_wait4(pid, (unsigned int __user *) &status, options,
+			(struct rusage __user *) &r);
 	set_fs (old_fs);
 
 	if (!access_ok(VERIFY_WRITE, ur, sizeof(*ur)))
 		return -EFAULT;
 
 	err = 0;
+	err |= put_user(status, ustatus);
 	err |= __put_user(r.ru_utime.tv_sec, &ur->ru_utime.tv_sec);
 	err |= __put_user(r.ru_utime.tv_usec, &ur->ru_utime.tv_usec);
 	err |= __put_user(r.ru_stime.tv_sec, &ur->ru_stime.tv_sec);

[46/50] proc: restrict access to /proc/PID/io

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Vasiliy Kulikov <segoon@openwall.com>

commit 1d1221f375c94ef961ba8574ac4f85c8870ddd51 upstream.

/proc/PID/io may be used for gathering private information.  E.g.  for
openssh and vsftpd daemons wchars/rchars may be used to learn the
precise password length.  Restrict it to processes being able to ptrace
the target process.

ptrace_may_access() is needed to prevent keeping open file descriptor of
"io" file, executing setuid binary and gathering io information of the
setuid'ed process.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 fs/proc/base.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -2519,6 +2519,9 @@ static int do_io_accounting(struct task_
 	struct task_io_accounting acct = task->ioac;
 	unsigned long flags;
 
+	if (!ptrace_may_access(task, PTRACE_MODE_READ))
+		return -EACCES;
+
 	if (whole && lock_task_sighand(task, &flags)) {
 		struct task_struct *t = task;
 
@@ -2641,7 +2644,7 @@ static const struct pid_entry tgid_base_
 	REG("coredump_filter", S_IRUGO|S_IWUSR, proc_coredump_filter_operations),
 #endif
 #ifdef CONFIG_TASK_IO_ACCOUNTING
-	INF("io",	S_IRUGO, proc_tgid_io_accounting),
+	INF("io",	S_IRUSR, proc_tgid_io_accounting),
 #endif
 };
 
@@ -2977,7 +2980,7 @@ static const struct pid_entry tid_base_s
 	REG("make-it-fail", S_IRUGO|S_IWUSR, proc_fault_inject_operations),
 #endif
 #ifdef CONFIG_TASK_IO_ACCOUNTING
-	INF("io",	S_IRUGO, proc_tid_io_accounting),
+	INF("io",	S_IRUSR, proc_tid_io_accounting),
 #endif
 };
 

[47/50] ALSA: sound/core/pcm_compat.c: adjust array index

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Julia Lawall <julia@diku.dk>

commit ca9380fd68514c7bc952282c1b4fc70607e9fe43 upstream.

Convert array index from the loop bound to the loop index.

A simplified version of the semantic patch that fixes this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e1,e2,ar;
@@

for(e1 = 0; e1 < e2; e1++) { <...
  ar[
- e2
+ e1
  ]
  ...> }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 sound/core/pcm_compat.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/core/pcm_compat.c
+++ b/sound/core/pcm_compat.c
@@ -341,7 +341,7 @@ static int snd_pcm_ioctl_xfern_compat(st
 			kfree(bufs);
 			return -EFAULT;
 		}
-		bufs[ch] = compat_ptr(ptr);
+		bufs[i] = compat_ptr(ptr);
 		bufptr++;
 	}
 	if (dir == SNDRV_PCM_STREAM_PLAYBACK)

[48/50] dm mpath: fix potential NULL pointer in feature arg processing

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Mike Snitzer <snitzer@redhat.com>

commit 286f367dad40beb3234a18c17391d03ba939a7f3 upstream.

Avoid dereferencing a NULL pointer if the number of feature arguments
supplied is fewer than indicated.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/md/dm-mpath.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -782,6 +782,11 @@ static int parse_features(struct arg_set
 	if (!argc)
 		return 0;
 
+	if (argc > as->argc) {
+		ti->error = "not enough arguments for features";
+		return -EINVAL;
+	}
+
 	do {
 		param_name = shift(as);
 		argc--;

[49/50] dm: fix idr leak on module removal

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: Alasdair G Kergon <agk@redhat.com>

commit d15b774c2920d55e3d58275c97fbe3adc3afde38 upstream.

Destroy _minor_idr when unloading the core dm module.  (Found by kmemleak.)

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/md/dm.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -36,6 +36,8 @@ static const char *_name = DM_NAME;
 static unsigned int major = 0;
 static unsigned int _major = 0;
 
+static DEFINE_IDR(_minor_idr);
+
 static DEFINE_SPINLOCK(_minor_lock);
 /*
  * For bio-based dm.
@@ -324,6 +326,12 @@ static void __exit dm_exit(void)
 
 	while (i--)
 		_exits[i]();
+
+	/*
+	 * Should be empty by this point.
+	 */
+	idr_remove_all(&_minor_idr);
+	idr_destroy(&_minor_idr);
 }
 
 /*
@@ -1772,8 +1780,6 @@ static int dm_any_congested(void *conges
 /*-----------------------------------------------------------------
  * An IDR is used to keep track of allocated minor numbers.
  *---------------------------------------------------------------*/
-static DEFINE_IDR(_minor_idr);
-
 static void free_minor(int minor)
 {
 	spin_lock(&_minor_lock);

[50/50] drm/i915: Fix typo in DRM_I915_OVERLAY_PUT_IMAGE ioctl

[Greg KH]

2.6.33-longterm review patch.  If anyone has any objections, please let us know.

------------------
 define

From: Ole Henrik Jahren <olehenja@alumni.ntnu.no>

commit 842d452985300f4ec14c68cb86046e8a1a3b7251 upstream.

Because of a typo, calling ioctl with DRM_IOCTL_I915_OVERLAY_PUT_IMAGE
is broken if the macro is used directly. When using libdrm the bug is
not hit, since libdrm handles the ioctl encoding internally.

The typo also leads to the .cmd and .cmd_drv fields of the drm_ioctl
structure for DRM_I915_OVERLAY_PUT_IMAGE having inconsistent content.

Signed-off-by: Ole Henrik Jahren <olehenja@alumni.ntnu.no>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 include/drm/i915_drm.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/include/drm/i915_drm.h
+++ b/include/drm/i915_drm.h
@@ -227,7 +227,7 @@ typedef struct _drm_i915_sarea {
 #define DRM_IOCTL_I915_GEM_GET_APERTURE	DRM_IOR  (DRM_COMMAND_BASE + DRM_I915_GEM_GET_APERTURE, struct drm_i915_gem_get_aperture)
 #define DRM_IOCTL_I915_GET_PIPE_FROM_CRTC_ID DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GET_PIPE_FROM_CRTC_ID, struct drm_i915_get_pipe_from_crtc_id)
 #define DRM_IOCTL_I915_GEM_MADVISE	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_MADVISE, struct drm_i915_gem_madvise)
-#define DRM_IOCTL_I915_OVERLAY_PUT_IMAGE	DRM_IOW(DRM_COMMAND_BASE + DRM_IOCTL_I915_OVERLAY_ATTRS, struct drm_intel_overlay_put_image)
+#define DRM_IOCTL_I915_OVERLAY_PUT_IMAGE	DRM_IOW(DRM_COMMAND_BASE + DRM_I915_OVERLAY_PUT_IMAGE, struct drm_intel_overlay_put_image)
 #define DRM_IOCTL_I915_OVERLAY_ATTRS	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_OVERLAY_ATTRS, struct drm_intel_overlay_attrs)
 
 /* Allow drivers to submit batchbuffers directly to hardware, relying