public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: "Tim Sander" <tim.sander@hbm.com>
To: "Peter Zijlstra" <peterz@infradead.org>
Cc: "linux-kernel" <linux-kernel@vger.kernel.org>,
	"Thomas Gleixner" <tglx@linutronix.de>,
	"Paul E. McKenney" <paulmck@us.ibm.com>,
	"linux-rt-users" <linux-rt-users@vger.kernel.org>
Subject: Re: [ANNOUNCE] 3.0.1-rt8 - Regression to 3.0-rt7
Date: Thu, 11 Aug 2011 18:41:09 +0200	[thread overview]
Message-ID: <201108111841.10270.tim.sander@hbm.com> (raw)
In-Reply-To: <201108111822.54953.tim.sander@hbm.com>

Hi Peter

Am Donnerstag, 11. August 2011, 18:22:54 schrieb Tim Sander:
> Am Donnerstag, 11. August 2011, 18:14:45 schrieb Peter Zijlstra:
> > On Thu, 2011-08-11 at 18:04 +0200, Tim Sander wrote:
> > > kernel BUG at kernel/posix-cpu-timers.c:1315!
> > > Unable to handle kernel NULL pointer dereference at virtual address
> > > 00000000 pgd = c0004000
> > > [00000000] *pgd=00000000
> > > Internal error: Oops: 817 [#1] PREEMPT
> > > Modules linked in: i2c_imx(+) netx netx_reset dspload fpgaload
> > > mxc_nand(+) nand nand_ids nand_ecc CPU: 0    Not tainted
> > > (3.0.0-pmx-rt8-00009-g39305ab #167)
> > > PC is at __bug+0x24/0x30
> > > LR is at walk_stackframe+0x24/0x40
> > > pc : [<c002cbf0>]    lr : [<c002cbb0>]    psr: 60000113
> > > sp : c782ff40  ip : c782fe28  fp : c782ff4c
> > > r10: 00000001  r9 : 00000000  r8 : c78663c0
> > > r7 : c030463c  r6 : c782e000  r5 : 00000000  r4 : c78663c0
> > > r3 : 00000000  r2 : 00000001  r1 : c782fe58  r0 : 00000034
> > > Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
> > > Control: 00c5387d  Table: 87b70008  DAC: 00000017
> > > Process posixcputmr/0 (pid: 6, stack limit = 0xc782e268)
> > > Stack: (0xc782ff40 to 0xc7830000)
> > > ff40: c782ff8c c782ff50 c005a5c0 c002cbd8 00000000 c782ff54 c782ff54
> > > 00000000 ff60: 00000000 c78663c0 00000000 c782e000 c030463c c78663c0
> > > 00000000 00000001 ff80: c782ffbc c782ff90 c005a88c c005a594 00000000
> > > c7817f28 00000000 c782ffcc ffa0: c005a800 00000000 00000000 00000000
> > > c782fff4 c782ffc0 c00570f0 c005a80c ffc0: c7817f28 00000000 00000000
> > > 00000000 c782ffd0 c782ffd0 c7817f28 c0057064 ffe0: c0040868 00000013
> > > 00000000 c782fff8 c0040868 c0057070 cccdcd6c ffdec890 Backtrace:
> > > [<c002cbcc>] (__bug+0x0/0x30) from [<c005a5c0>]
> > > (__run_posix_cpu_timers+0x38/0x278) [<c005a588>]
> > > (__run_posix_cpu_timers+0x0/0x278) from [<c005a88c>]
> > > (posix_cpu_timers_thread+0x8c/0x124) [<c005a800>]
> > > (posix_cpu_timers_thread+0x0/0x124) from [<c00570f0>]
> > > (kthread+0x8c/0x94) [<c0057064>] (kthread+0x0/0x94) from [<c0040868>]
> > > (do_exit+0x0/0x2d8)
> > > 
> > >  r7:00000013 r6:c0040868 r5:c0057064 r4:c7817f28
> > > 
> > > Code: e59f0010 e1a01003 eb086a88 e3a03000 (e5833000)
> > > ---[ end trace d632afeaa11559d4 ]---
> > 
> > Yay a new one, and this is a PREEMPT_LL build right? /me goes poke at
> > it.
The last email was wrong, it was INDEED a CONFIG_PREEMPT_LL=y config.
I checked the /proc/config.gz file. It is also the rt8 kernel based on the
3.0 (and NOT the 3.0.1) kernel. Will test the stuff on 3.0.1 later or tomorrow.

Sorry i just compiled to much kernels today...

Best regards
Tim


Hottinger Baldwin Messtechnik GmbH, Im Tiefen See 45, 64293 Darmstadt, Germany | www.hbm.com 

Registered as GmbH (German limited liability corporation) in the commercial register at the local court of Darmstadt, HRB 1147  
Company domiciled in Darmstadt | CEO: Andreas Huellhorst | Chairman of the board: James Charles Webster

Als Gesellschaft mit beschraenkter Haftung eingetragen im Handelsregister des Amtsgerichts Darmstadt unter HRB 1147 
Sitz der Gesellschaft: Darmstadt | Geschaeftsfuehrung: Andreas Huellhorst | Aufsichtsratsvorsitzender: James Charles Webster

The information in this email is confidential. It is intended solely for the addressee. If you are not the intended recipient, please let me know and delete this email.

Die in dieser E-Mail enthaltene Information ist vertraulich und lediglich für den Empfaenger bestimmt. Sollten Sie nicht der eigentliche Empfaenger sein, informieren Sie mich bitte kurz und loeschen diese E-Mail.


  reply	other threads:[~2011-08-11 16:41 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-08-05 21:44 [ANNOUNCE] 3.0.1-rt8 Peter Zijlstra
2011-08-09 15:13 ` [ANNOUNCE] 3.0.1-rt8 - Regression to 3.0-rt7 Tim Sander
2011-08-11  9:43   ` Peter Zijlstra
2011-08-11 11:30     ` Tim Sander
2011-08-11 12:02       ` Peter Zijlstra
2011-08-11 12:52         ` Tim Sander
2011-08-11 15:28         ` Tim Sander
2011-08-11 12:41       ` Peter Zijlstra
2011-08-11 16:04         ` Tim Sander
2011-08-11 16:14           ` Peter Zijlstra
2011-08-11 16:22             ` Tim Sander
2011-08-11 16:41               ` Tim Sander [this message]
2011-08-11 16:39           ` Peter Zijlstra
2011-08-11 17:08             ` Tim Sander
2011-08-11 18:05           ` Peter Zijlstra
2011-08-12  8:59             ` Tim Sander
2011-08-11 10:45   ` Peter Zijlstra
2011-08-11 15:36     ` Tim Sander
2011-08-09 18:31 ` [ANNOUNCE] 3.0.1-rt8 Fernando Lopez-Lezcano
2011-08-09 18:47   ` Peter Zijlstra
2011-08-10  1:08     ` Paul E. McKenney
2011-08-10  1:07   ` Paul E. McKenney

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201108111841.10270.tim.sander@hbm.com \
    --to=tim.sander@hbm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rt-users@vger.kernel.org \
    --cc=paulmck@us.ibm.com \
    --cc=peterz@infradead.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox