Re: [PATCH] x86_64: permit to configure ISA support also for x86_64 systems

[Arnd Bergmann <arnd@arndb.de>]

On Thursday 22 September 2011, Wolfgang Grandegger wrote:
> On 09/21/2011 11:24 AM, Arnd Bergmann wrote:
> > On Wednesday 21 September 2011 10:33:10 Wolfgang Grandegger wrote:
> > The other point is that you are probably using inb/outb operations,
> > which I'm trying to provide only on ISA/PCMCIA/PCI based systems in
> > the future. Once I finish that work, you will also need to depend on
> > HAS_IOPORT (which currently means something else).
> 
> OK, the sja1000_isa driver just uses memory mapped access.

According to this it uses both PIO and MMIO:

$ git grep '\(in\|out\|read\|write\)\(b\|w\|l\)' drivers/net/can/sja1000/sja1000_isa.c 
drivers/net/can/sja1000/sja1000_isa.c:  return readb(priv->reg_base + reg);
drivers/net/can/sja1000/sja1000_isa.c:  writeb(val, priv->reg_base + reg);
drivers/net/can/sja1000/sja1000_isa.c:  return inb((unsigned long)priv->reg_base + reg);
drivers/net/can/sja1000/sja1000_isa.c:  outb(val, (unsigned long)priv->reg_base + reg);
drivers/net/can/sja1000/sja1000_isa.c:  outb(reg, base);
drivers/net/can/sja1000/sja1000_isa.c:  return inb(base + 1);
drivers/net/can/sja1000/sja1000_isa.c:  outb(reg, base);
drivers/net/can/sja1000/sja1000_isa.c:  outb(val, base + 1);

But don't worry about it, I'll make the right Kconfig annotation when I submit my
patches.

	Arnd