public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Matthias Dellweg <2500@gmx.de>
To: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh@suse.de>,
	Vasiliy Kulikov <segooon@gmail.com>,
	Michal Sojka <sojkam1@fel.cvut.cz>, Arnd Bergmann <arnd@arndb.de>,
	<linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] enable usb control message with class specific request
Date: Fri, 23 Sep 2011 19:57:26 +0200	[thread overview]
Message-ID: <20110923195726.0cf0e8b5@horus> (raw)
In-Reply-To: <Pine.LNX.4.44L0.1109231207160.2059-100000@iolanthe.rowland.org>

Am Fri, 23 Sep 2011 12:16:40 -0400 (EDT)
schrieb Alan Stern <stern@rowland.harvard.edu>:
> This is basically okay.  But your mailer has mangled the whitespace.
> [...]
> Alan Stern

OK, hoping that my mailer doesn't get wild again, this is the polished version
following your suggestions.
Thanks for your help!
  Matthias Dellweg

>From b7c4b6f5780296fd0d53d66e08d5bce0dc450b7f Mon Sep 17 00:00:00 2001
From: Matthias Dellweg <2500@gmx.de>
Date: Fri, 23 Sep 2011 19:32:39 +0200
Subject: [PATCH] drivers/usb/core/devio.c: Check for printer class specific
 request

Signed-off-by: Matthias Dellweg <2500@gmx.de>
---
 drivers/usb/core/devio.c |   20 +++++++++++++++++---
 1 files changed, 17 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 37518df..e4175cc 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -607,9 +607,10 @@ static int findintfep(struct usb_device *dev, unsigned int ep)
 }
 
 static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype,
-			   unsigned int index)
+			   unsigned int request, unsigned int index)
 {
 	int ret = 0;
+	struct usb_host_interface *alt_setting;
 
 	if (ps->dev->state != USB_STATE_UNAUTHENTICATED
 	 && ps->dev->state != USB_STATE_ADDRESS
@@ -618,6 +619,18 @@ static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype,
 	if (USB_TYPE_VENDOR == (USB_TYPE_MASK & requesttype))
 		return 0;
 
+	/*
+	 * check for the special corner case 'get_device_id' in the printer
+	 * class specification, where wIndex is (interface << 8 | altsetting)
+	 */
+	if (requesttype == 0xa1 && request == 0) {
+		alt_setting = usb_find_alt_setting(ps->dev->actconfig,
+						   index >> 8, index & 0xff);
+		if (alt_setting
+		 && alt_setting->desc.bInterfaceClass == USB_CLASS_PRINTER)
+			index >>= 8;
+	}
+
 	index &= 0xff;
 	switch (requesttype & USB_RECIP_MASK) {
 	case USB_RECIP_ENDPOINT:
@@ -770,7 +783,8 @@ static int proc_control(struct dev_state *ps, void __user *arg)
 
 	if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
 		return -EFAULT;
-	ret = check_ctrlrecip(ps, ctrl.bRequestType, ctrl.wIndex);
+	ret = check_ctrlrecip(ps, ctrl.bRequestType, ctrl.bRequest,
+			      ctrl.wIndex);
 	if (ret)
 		return ret;
 	wLength = ctrl.wLength;		/* To suppress 64k PAGE_SIZE warning */
@@ -1100,7 +1114,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 			kfree(dr);
 			return -EINVAL;
 		}
-		ret = check_ctrlrecip(ps, dr->bRequestType,
+		ret = check_ctrlrecip(ps, dr->bRequestType, dr->bRequest,
 				      le16_to_cpup(&dr->wIndex));
 		if (ret) {
 			kfree(dr);
-- 
1.7.6.3


  reply	other threads:[~2011-09-23 17:57 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-09-22 10:10 [PATCH] enable usb control message with class specific request Matthias Dellweg
2011-09-22 15:12 ` Alan Stern
2011-09-22 21:56   ` Matthias Dellweg
2011-09-23  7:05     ` Matthias Dellweg
2011-09-23 16:16       ` Alan Stern
2011-09-23 17:57         ` Matthias Dellweg [this message]
2011-09-23 18:31           ` Alan Stern
2011-09-25 12:46             ` Matthias Dellweg
2011-09-26 22:34               ` [PATCH] usb/core/devio.c: Check for printer " Greg KH
2011-09-26 23:24                 ` Matthias Dellweg
2011-09-26 23:31                   ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110923195726.0cf0e8b5@horus \
    --to=2500@gmx.de \
    --cc=arnd@arndb.de \
    --cc=gregkh@suse.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=segooon@gmail.com \
    --cc=sojkam1@fel.cvut.cz \
    --cc=stern@rowland.harvard.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox