From: Matthias Dellweg <2500@gmx.de>
To: Greg KH <greg@kroah.com>
Cc: Alan Stern <stern@rowland.harvard.edu>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] usb/core/devio.c: Check for printer class specific request
Date: Tue, 27 Sep 2011 01:24:07 +0200 [thread overview]
Message-ID: <20110927012407.6b294fbf@horus> (raw)
In-Reply-To: <20110926223430.GA21960@kroah.com>
[-- Attachment #1: Type: text/plain, Size: 1703 bytes --]
Am Mon, 26 Sep 2011 15:34:30 -0700
schrieb Greg KH <greg@kroah.com>:
> On Sun, Sep 25, 2011 at 02:46:51PM +0200, Matthias Dellweg wrote:
> > From: Matthias Dellweg <2500@gmx.de>
> >
> > In the usb printer class specific request get_device_id the value of
> > wIndex is (interface << 8 | altsetting) instead of just interface.
> > This enables the detection of some printers with libusb.
> >
> > The hardware I tested this patch with is a Prolific
> > USB->Centronics cable (067b:2305).
> >
> > Acked-by: Alan Stern <stern@rowland.harvard.edu>
> > Signed-off-by: Matthias Dellweg <2500@gmx.de>
> > Cc: stable <stable@kernel.org>
> > ---
> > drivers/usb/core/devio.c | 21 ++++++++++++++++++---
> > 1 files changed, 18 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
> > index 37518df..1d73709 100644
> > --- a/drivers/usb/core/devio.c
> > +++ b/drivers/usb/core/devio.c
> > @@ -607,9 +607,10 @@ static int findintfep(struct usb_device *dev,
> > unsigned int ep) }
> >
> > static int check_ctrlrecip(struct dev_state *ps, unsigned int
> > requesttype,
> > - unsigned int index)
> > + unsigned int request, unsigned int index)
> > {
> > int ret = 0;
> > + struct usb_host_interface *alt_setting;
> >
> > if (ps->dev->state != USB_STATE_UNAUTHENTICATED
> > && ps->dev->state != USB_STATE_ADDRESS
>
> All of the tabs were stripped out of this email, making it impossible
> to apply it :(
>
> Care to fix this up and resend it so that I can apply it?
>
> thanks,
>
> greg k-h
Again? I mean I'm sorry.
Do you accept it as an attachment?
Matthias Dellweg
[-- Attachment #2: 0001-usb-core-devio.c-Check-for-printer-class-specific-re.patch --]
[-- Type: text/x-patch, Size: 2580 bytes --]
>From 5bdb64cbee0b2f353d3bc444c147ba78f34a1f69 Mon Sep 17 00:00:00 2001
From: Matthias Dellweg <2500@gmx.de>
Date: Sun, 25 Sep 2011 14:26:25 +0200
Subject: [PATCH] usb/core/devio.c: Check for printer class specific request
In the usb printer class specific request get_device_id the value of
wIndex is (interface << 8 | altsetting) instead of just interface.
This enables the detection of some printers with libusb.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Matthias Dellweg <2500@gmx.de>
---
drivers/usb/core/devio.c | 21 ++++++++++++++++++---
1 files changed, 18 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 37518df..1d73709 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -607,9 +607,10 @@ static int findintfep(struct usb_device *dev, unsigned int ep)
}
static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype,
- unsigned int index)
+ unsigned int request, unsigned int index)
{
int ret = 0;
+ struct usb_host_interface *alt_setting;
if (ps->dev->state != USB_STATE_UNAUTHENTICATED
&& ps->dev->state != USB_STATE_ADDRESS
@@ -618,6 +619,19 @@ static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype,
if (USB_TYPE_VENDOR == (USB_TYPE_MASK & requesttype))
return 0;
+ /*
+ * check for the special corner case 'get_device_id' in the printer
+ * class specification, where wIndex is (interface << 8 | altsetting)
+ * instead of just interface
+ */
+ if (requesttype == 0xa1 && request == 0) {
+ alt_setting = usb_find_alt_setting(ps->dev->actconfig,
+ index >> 8, index & 0xff);
+ if (alt_setting
+ && alt_setting->desc.bInterfaceClass == USB_CLASS_PRINTER)
+ index >>= 8;
+ }
+
index &= 0xff;
switch (requesttype & USB_RECIP_MASK) {
case USB_RECIP_ENDPOINT:
@@ -770,7 +784,8 @@ static int proc_control(struct dev_state *ps, void __user *arg)
if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
return -EFAULT;
- ret = check_ctrlrecip(ps, ctrl.bRequestType, ctrl.wIndex);
+ ret = check_ctrlrecip(ps, ctrl.bRequestType, ctrl.bRequest,
+ ctrl.wIndex);
if (ret)
return ret;
wLength = ctrl.wLength; /* To suppress 64k PAGE_SIZE warning */
@@ -1100,7 +1115,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
kfree(dr);
return -EINVAL;
}
- ret = check_ctrlrecip(ps, dr->bRequestType,
+ ret = check_ctrlrecip(ps, dr->bRequestType, dr->bRequest,
le16_to_cpup(&dr->wIndex));
if (ret) {
kfree(dr);
--
1.7.6.3
next prev parent reply other threads:[~2011-09-26 23:24 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-22 10:10 [PATCH] enable usb control message with class specific request Matthias Dellweg
2011-09-22 15:12 ` Alan Stern
2011-09-22 21:56 ` Matthias Dellweg
2011-09-23 7:05 ` Matthias Dellweg
2011-09-23 16:16 ` Alan Stern
2011-09-23 17:57 ` Matthias Dellweg
2011-09-23 18:31 ` Alan Stern
2011-09-25 12:46 ` Matthias Dellweg
2011-09-26 22:34 ` [PATCH] usb/core/devio.c: Check for printer " Greg KH
2011-09-26 23:24 ` Matthias Dellweg [this message]
2011-09-26 23:31 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110927012407.6b294fbf@horus \
--to=2500@gmx.de \
--cc=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox