[PATCH] pata_artop: unify ->prereset methods

Bartlomiej Zolnierkiewicz
2011-10-11T18:25:22Z

From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] pata_artop: unify ->prereset methods

* Unify ->prereset methods for ATP850 and ATP86x[R] chipsets.

* Fix ->prereset documentation while at it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
earlier references:
https://lkml.org/lkml/2009/11/25/315

drivers/ata/pata_artop.c | 26 +++++---------------------
1 file changed, 5 insertions(+), 21 deletions(-)

Index: b/drivers/ata/pata_artop.c
===================================================================
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -39,31 +39,15 @@

static int clock = 0;

-static int artop6210_pre_reset(struct ata_link *link, unsigned long deadline)
-{
- struct ata_port *ap = link->ap;
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- const struct pci_bits artop_enable_bits[] = {
- { 0x4AU, 1U, 0x02UL, 0x02UL }, /* port 0 */
- { 0x4AU, 1U, 0x04UL, 0x04UL }, /* port 1 */
- };
-
- if (!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
- return -ENOENT;
-
- return ata_sff_prereset(link, deadline);
-}
-
/**
- * artop6260_pre_reset - check for 40/80 pin
+ * artop62x0_pre_reset - probe begin
* @link: link
* @deadline: deadline jiffies for the operation
*
- * The ARTOP hardware reports the cable detect bits in register 0x49.
* Nothing complicated needed here.
*/

-static int artop6260_pre_reset(struct ata_link *link, unsigned long deadline)
+static int artop62x0_pre_reset(struct ata_link *link, unsigned long deadline)
{
static const struct pci_bits artop_enable_bits[] = {
{ 0x4AU, 1U, 0x02UL, 0x02UL }, /* port 0 */
@@ -73,7 +57,7 @@ static int artop6260_pre_reset(struct at
struct ata_port *ap = link->ap;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);

- /* Odd numbered device ids are the units with enable bits (the -R cards) */
+ /* Odd numbered device ids are the units with enable bits. */
if ((pdev->device & 1) &&
!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
return -ENOENT;
@@ -317,7 +301,7 @@ static struct ata_port_operations artop6
.cable_detect = ata_cable_40wire,
.set_piomode = artop6210_set_piomode,
.set_dmamode = artop6210_set_dmamode,
- .prereset = artop6210_pre_reset,
+ .prereset = artop62x0_pre_reset,
.qc_defer = artop6210_qc_defer,
};

@@ -326,7 +310,7 @@ static struct ata_port_operations artop6
.cable_detect = artop6260_cable_detect,
.set_piomode = artop6260_set_piomode,
.set_dmamode = artop6260_set_dmamode,
- .prereset = artop6260_pre_reset,
+ .prereset = artop62x0_pre_reset,
};