From: Anton Vorontsov <cbouatmailru@gmail.com>
To: "Kim, Milo" <Milo.Kim@nsc.com>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"dwmw2@infradead.org" <dwmw2@infradead.org>
Subject: Re: [PATCH 2/3] power: Add LP8727 charger driver
Date: Wed, 12 Oct 2011 23:49:27 +0400 [thread overview]
Message-ID: <20111012194927.GA9239@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <B567DBAB974C0544994013492B949F8E380F619DE2@EXMAIL03.scwf.nsc.com>
Hello Kim,
Sorry for the delay.
On Wed, Sep 07, 2011 at 01:55:27AM -0700, Kim, Milo wrote:
>
> diff --git a/drivers/power/lp8727_charger.c b/drivers/power/lp8727_charger.c
> new file mode 100755
> index 0000000..2a649e0
Note that each patch should have commit message (ideally), and a
Signed-off-by: line.
Though, I would fixup all the issues myself, if the patch had at
least Signed-off-by. :-)
But while you're at it, you might also want to fix some cosmetic
issues:
[...]
> +static int lp8727_is_dedicated_charger(struct lp8727_chg *pchg)
> +{
> + u8 val;
> + (void)lp8727_i2c_read_byte(pchg, STATUS1, &val);
No need for these casts, please.
> + return (val & DCPORT);
> +}
[...]
> +static int lp8727_charger_get_property(struct power_supply *psy,
> + enum power_supply_property psp,
> + union power_supply_propval *val)
> +{
> + struct lp8727_chg *pchg = dev_get_drvdata(psy->dev->parent);
> +
> + if (psp == POWER_SUPPLY_PROP_ONLINE) {
> + val->intval = lp8727_is_charger_attached(psy->name,
> + pchg->devid);
> + }
No need for brackets here.
> +
> + return 0;
> +}
> +
[...]
> +static void lp8727_unregister_psy(struct lp8727_chg *pchg)
> +{
> + struct lp8727_psy *psy = pchg->psy;
> +
> + if (psy) {
if (!psy)
return;
> + power_supply_unregister(&psy->ac);
> + power_supply_unregister(&psy->usb);
> + power_supply_unregister(&psy->batt);
> + kfree(psy);
> + }
> +}
> +
> +static int lp8727_probe(struct i2c_client *cl, const struct i2c_device_id *id)
> +{
> + struct lp8727_chg *pchg;
> + int ret;
> +
> + pchg = kzalloc(sizeof(*pchg), GFP_KERNEL);
> + if (!pchg)
> + return -ENOMEM;
> +
> + pchg->client = cl;
> + pchg->dev = &cl->dev;
> + pchg->pdata = cl->dev.platform_data;
> + i2c_set_clientdata(cl, pchg);
> +
> + mutex_init(&pchg->xfer_lock);
> +
> + lp8727_init_device(pchg);
> + lp8727_intr_config(pchg);
> +
> + ret = lp8727_register_psy(pchg);
> + if (ret) {
> + dev_err(pchg->dev,
> + "can not register power supplies. err=%d", ret);
No need for brackets.
> + }
> +
> + return 0;
> +}
> +
> +static int __devexit lp8727_remove(struct i2c_client *cl)
> +{
> + struct lp8727_chg *pchg = i2c_get_clientdata(cl);
> +
> + lp8727_unregister_psy(pchg);
> + free_irq(pchg->client->irq, pchg);
> + flush_workqueue(pchg->irqthread);
> + destroy_workqueue(pchg->irqthread);
> + kfree(pchg);
> + return 0;
> +}
> +
> +static const struct i2c_device_id lp8727_ids[] = {
> + {"lp8727", 0},
> +};
> +
> +static struct i2c_driver lp8727_driver = {
> + .driver = {
> + .name = "lp8727",
> + },
> + .probe = lp8727_probe,
> + .remove = __devexit_p(lp8727_remove),
> + .id_table = lp8727_ids,
> +};
> +
> +static int __init lp8727_init(void)
> +{
> + return i2c_add_driver(&lp8727_driver);
> +}
> +
> +static void __exit lp8727_chg_exit(void)
> +{
> + i2c_del_driver(&lp8727_driver);
> +}
> +
> +module_init(lp8727_init);
> +module_exit(lp8727_chg_exit);
> +
> +MODULE_DESCRIPTION("National Semiconductor LP8727 charger driver");
> +MODULE_AUTHOR("Woogyom Kim <milo.kim@nsc.com>");
> +MODULE_LICENSE("GPL");
>
--
Anton Vorontsov
Email: cbouatmailru@gmail.com
next prev parent reply other threads:[~2011-10-12 19:49 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-07 8:55 [PATCH 2/3] power: Add LP8727 charger driver Kim, Milo
2011-10-12 19:49 ` Anton Vorontsov [this message]
2011-10-13 6:06 ` Kim, Milo
2011-11-18 5:43 ` [PATCH] power: lp8727 - add supported i2c functionality check routine Kim, Milo
2012-01-04 4:35 ` Anton Vorontsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111012194927.GA9239@oksana.dev.rtsoft.ru \
--to=cbouatmailru@gmail.com \
--cc=Milo.Kim@nsc.com \
--cc=dwmw2@infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox