From: Jesse Barnes <jbarnes@virtuousgeek.org>
To: Linus Torvalds <torvalds@linux-foundation.org>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [git pull] PCI changes
Date: Fri, 28 Oct 2011 13:29:35 -0700 [thread overview]
Message-ID: <20111028132935.6630b575@jbarnes-desktop> (raw)
[-- Attachment #1: Type: text/plain, Size: 7436 bytes --]
Note! There are two branches available, see below.
The following changes since commit
e9308cfd5ab4ade3d81cf591c7599c3a05a21b04:
Merge branch 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6 (2011-10-14 17:07:52 +1200)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci next-revert
Probably the most exciting bits of this series are the MPS fixes and
Joerg's PASID stuff. But I don't think there's anything really risky
(i.e. no big resource management changes this time around).
We found a problem on PPC with the latency setup changes, so this
branch includes reverts for those patches. However, another branch is
available with those patches rebased out if you prefer a cleaner
changelog. See below for the changelog and diffstat to expect from
that branch.
Ben Hutchings (2):
PCI: Add Solarflare vendor ID and SFC4000 device IDs
PCI: Add quirk for known incorrect MPSS
Benjamin Herrenschmidt (2):
PCI: Make pci_setup_bridge() non-static for use by arch code
pci: Clamp pcie_set_readrq() when using "performance" settings
Jan Beulich (1):
x86: constify PCI raw ops structures
Jesse Barnes (7):
Revert "PCI: latency timer doesn't apply to PCIe"
Revert "PCI: x86: use generic pcibios_set_master()"
Revert "PCI: sh: use generic pcibios_set_master()"
Revert "PCI: mn10300: use generic pcibios_set_master()"
Revert "PCI: mips: use generic pcibios_set_master()"
Revert "PCI: frv: use generic pcibios_set_master()"
Revert "PCI: Pull PCI 'latency timer' setup up into the core"
Joerg Roedel (4):
PCI: Move ATS implementation into own file
PCI: Export ATS functions to modules
PCI: Add implementation for PRI capability
PCI: Add support for PASID capability
Jon Mason (3):
PCI: Workaround for Intel MPS errata
PCI: enable MPS "performance" setting to properly handle bridge MPS
PCI: Clean-up MPS debug output
Josh Boyer (1):
PCI quirk: mmc: Always check for lower base frequency quirk for Ricoh 1180:e823
Myron Stowe (7):
PCI: Pull PCI 'latency timer' setup up into the core
PCI: frv: use generic pcibios_set_master()
PCI: mips: use generic pcibios_set_master()
PCI: mn10300: use generic pcibios_set_master()
PCI: sh: use generic pcibios_set_master()
PCI: x86: use generic pcibios_set_master()
PCI: latency timer doesn't apply to PCIe
Prarit Bhargava (1):
PCI hotplug: acpiphp: Prevent deadlock on PCI-to-PCI bridge remove
Rafael J. Wysocki (2):
PCI / PM: Extend PME polling to all PCI devices
PCI / PM: Remove unnecessary error variable from acpi_dev_run_wake()
arch/x86/include/asm/pci_x86.h | 6 +-
arch/x86/pci/ce4100.c | 2 +-
arch/x86/pci/common.c | 4 +-
arch/x86/pci/direct.c | 6 +-
arch/x86/pci/mmconfig_32.c | 2 +-
arch/x86/pci/mmconfig_64.c | 2 +-
arch/x86/pci/numaq_32.c | 2 +-
arch/x86/pci/olpc.c | 2 +-
arch/x86/pci/pcbios.c | 4 +-
drivers/acpi/osl.c | 3 +-
drivers/net/sfc/efx.c | 10 +-
drivers/net/sfc/efx.h | 4 -
drivers/net/sfc/falcon.c | 3 +-
drivers/net/sfc/falcon_boards.c | 3 +-
drivers/pci/Kconfig | 26 +++
drivers/pci/Makefile | 1 +
drivers/pci/ats.c | 438 ++++++++++++++++++++++++++++++++++++
drivers/pci/hotplug/acpiphp_glue.c | 109 ++++++++--
drivers/pci/iov.c | 142 ------------
drivers/pci/pci-acpi.c | 6 +-
drivers/pci/pci.c | 59 +++--
drivers/pci/pcie/pme.c | 9 +
drivers/pci/probe.c | 68 +++---
drivers/pci/quirks.c | 111 ++++++++--
drivers/pci/setup-bus.c | 2 +-
include/acpi/acpiosxf.h | 2 +
include/linux/pci-ats.h | 75 ++++++
include/linux/pci.h | 2 +
include/linux/pci_ids.h | 5 +
include/linux/pci_regs.h | 20 ++
30 files changed, 868 insertions(+), 260 deletions(-)
create mode 100644 drivers/pci/ats.c
--------- rebased tree info below
The following changes since commit e9308cfd5ab4ade3d81cf591c7599c3a05a21b04:
Merge branch 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6 (2011-10-14 17:07:52 +1200)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci next-rebase
Ben Hutchings (2):
PCI: Add Solarflare vendor ID and SFC4000 device IDs
PCI: Add quirk for known incorrect MPSS
Benjamin Herrenschmidt (2):
PCI: Make pci_setup_bridge() non-static for use by arch code
pci: Clamp pcie_set_readrq() when using "performance" settings
Jan Beulich (1):
x86: constify PCI raw ops structures
Joerg Roedel (4):
PCI: Move ATS implementation into own file
PCI: Export ATS functions to modules
PCI: Add implementation for PRI capability
PCI: Add support for PASID capability
Jon Mason (3):
PCI: Workaround for Intel MPS errata
PCI: enable MPS "performance" setting to properly handle bridge MPS
PCI: Clean-up MPS debug output
Josh Boyer (1):
PCI quirk: mmc: Always check for lower base frequency quirk for Ricoh 1180:e823
Prarit Bhargava (1):
PCI hotplug: acpiphp: Prevent deadlock on PCI-to-PCI bridge remove
Rafael J. Wysocki (2):
PCI / PM: Extend PME polling to all PCI devices
PCI / PM: Remove unnecessary error variable from acpi_dev_run_wake()
arch/x86/include/asm/pci_x86.h | 6 +-
arch/x86/pci/ce4100.c | 2 +-
arch/x86/pci/common.c | 4 +-
arch/x86/pci/direct.c | 6 +-
arch/x86/pci/mmconfig_32.c | 2 +-
arch/x86/pci/mmconfig_64.c | 2 +-
arch/x86/pci/numaq_32.c | 2 +-
arch/x86/pci/olpc.c | 2 +-
arch/x86/pci/pcbios.c | 4 +-
drivers/acpi/osl.c | 3 +-
drivers/net/sfc/efx.c | 10 +-
drivers/net/sfc/efx.h | 4 -
drivers/net/sfc/falcon.c | 3 +-
drivers/net/sfc/falcon_boards.c | 3 +-
drivers/pci/Kconfig | 26 +++
drivers/pci/Makefile | 1 +
drivers/pci/ats.c | 438 ++++++++++++++++++++++++++++++++++++
drivers/pci/hotplug/acpiphp_glue.c | 109 ++++++++--
drivers/pci/iov.c | 142 ------------
drivers/pci/pci-acpi.c | 6 +-
drivers/pci/pci.c | 59 +++--
drivers/pci/pcie/pme.c | 9 +
drivers/pci/probe.c | 68 +++---
drivers/pci/quirks.c | 111 ++++++++--
drivers/pci/setup-bus.c | 2 +-
include/acpi/acpiosxf.h | 2 +
include/linux/pci-ats.h | 75 ++++++
include/linux/pci.h | 2 +
include/linux/pci_ids.h | 5 +
include/linux/pci_regs.h | 20 ++
30 files changed, 868 insertions(+), 260 deletions(-)
create mode 100644 drivers/pci/ats.c
Thanks,
--
Jesse Barnes, Intel Open Source Technology Center
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
next reply other threads:[~2011-10-28 20:29 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-28 20:29 Jesse Barnes [this message]
2011-10-28 23:30 ` [git pull] PCI changes Rafael J. Wysocki
2011-10-31 17:18 ` Jesse Barnes
-- strict thread matches above, loose matches on Subject: below --
2012-01-11 18:34 Jesse Barnes
2012-01-12 3:38 ` Linus Torvalds
2012-01-13 21:24 ` Matthew Garrett
2012-01-13 23:14 ` Linus Torvalds
2012-01-13 23:26 ` Matthew Garrett
2012-01-12 5:34 ` Yinghai Lu
2011-07-28 23:51 Jesse Barnes
2011-05-23 20:43 Jesse Barnes
2011-05-23 21:16 ` David Miller
2011-05-24 0:04 ` Jesse Barnes
2011-03-18 17:30 Jesse Barnes
2011-01-14 17:01 Jesse Barnes
2010-08-05 19:52 Jesse Barnes
2010-05-21 21:48 Jesse Barnes
2010-05-22 0:12 ` Linus Torvalds
2010-05-22 1:59 ` Linus Torvalds
2010-05-22 3:01 ` Jesse Barnes
2010-05-22 8:17 ` Pekka Enberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111028132935.6630b575@jbarnes-desktop \
--to=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox