Re: [REGRESSION]: hibernate/sleep regression w/ bisection

[Tejun Heo <tj@kernel.org>]

(cc'ing David Airlie and dri-devel)

Hello, the original thread can be read from

  http://thread.gmane.org/gmane.linux.kernel/1209587

Full sysrq-t output at

  http://article.gmane.org/gmane.linux.kernel/1211256

So, the problem is that after a seemingly unreated update to input
serio driver (convert to use workqueue), X seems to lock up
sporadically across suspend/resume cycles.

I went through the full sysrq-t output but couldn't spot anything
suspicious w/ anything else.  No worker is stuck and nobody is waiting
for flush to finish.

Stack trace for X follows.

> X               S f499b944  5800  1652   1651 0x00400080
>  f499b9a8 00003086 00000000 f499b944 c100d4a4 00000000 00000000 f499b958
>  00000000 f499b9a8 f5173140 d7857c56 00000057 f5173140 d8b69880 00000057
>  00000001 00000000 f499b9b4 c104dd89 000f4240 00000000 00000000 f499ba68
> Call Trace:
>  [<c1291301>] ttm_bo_wait_unreserved+0x5f/0x106
>  [<c129145f>] ttm_bo_reserve_locked+0xb7/0xe1
>  [<c1292c27>] ttm_bo_reserve+0x26/0x95
>  [<c12c3c97>] radeon_crtc_do_set_base+0xbd/0x6d2
>  [<c12c42e7>] radeon_crtc_set_base+0x1b/0x1d
>  [<c12c430d>] radeon_crtc_mode_set+0x24/0xdd7
>  [<c1279c57>] drm_crtc_helper_set_mode+0x32c/0x48b
>  [<c1279e2f>] drm_helper_resume_force_mode+0x79/0x23e
>  [<c12ace10>] radeon_gpu_reset+0x84/0x98
>  [<c12c0838>] radeon_fence_wait+0x2d1/0x311
>  [<c12c0e37>] radeon_sync_obj_wait+0xc/0xe
>  [<c12908be>] ttm_bo_wait+0xa1/0x108
>  [<c12d6e7b>] radeon_gem_wait_idle_ioctl+0x76/0xc4
>  [<c127e62e>] drm_ioctl+0x1c2/0x42c
>  [<c10e288e>] do_vfs_ioctl+0x79/0x54b
>  [<c10e2dcb>] sys_ioctl+0x6b/0x70
>  [<c1593813>] sysenter_do_call+0x12/0x22

Do you guys have any ideas what's going on?  It seems to be waiting
for bo->reserved to go zero.  Is it possible that someone there is
forgetting to properly kick a work item after resume causing the wait
to stall?

Andrew, can you please kill the X server after the hang and see
whether that brings the system back?  I think sshd should still work
and if not you can write a script to kill the X server after 30secs
after resume (and kill that script if resume succeeds).

Thank you.

-- 
tejun