Re: [PATCH] hwmon: lm63: Add support for the NatSemi LM96163.

[Thierry Reding <thierry.reding@avionic-design.de>]

[-- Attachment #1: Type: text/plain, Size: 1610 bytes --]

* Guenter Roeck wrote:
> Hi,
> 
> On Mon, 2011-11-07 at 05:20 -0500, Thierry Reding wrote:
> > Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
> > ---
> >  drivers/hwmon/lm63.c |    2 +-
> >  1 files changed, 1 insertions(+), 1 deletions(-)
> > 
> > diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
> > index 508cb29..94e373c 100644
> > --- a/drivers/hwmon/lm63.c
> > +++ b/drivers/hwmon/lm63.c
> > @@ -483,7 +483,7 @@ static int lm63_detect(struct i2c_client *new_client,
> >  		return -ENODEV;
> >  	}
> >  
> > -	if (chip_id == 0x41 && address == 0x4c)
> > +	if ((chip_id == 0x41 || chip_id == 0x49) && address == 0x4c)
> >  		strlcpy(info->type, "lm63", I2C_NAME_SIZE);
> >  	else if (chip_id == 0x51 && (address == 0x18 || address == 0x4e))
> >  		strlcpy(info->type, "lm64", I2C_NAME_SIZE);
> 
> Minor - the new chip should be mentioned in drivers/hwmon/Kconfig and in
> Documentation/hwmon/lm63.

I don't see how to list this variant meaningfully in the documentation.
Since, as you mention, no functionality specific to the LM96163 is added,
this patch really only adds support for one more lm63 chip.

> My main concern is that LM96163 supports a high resolution PWM mode.
> Since that mode is much more convenient than the LM63-compatible mode, I
> think it is likely to be enabled in designs using LM96163, and it should
> be supported by the driver if we add support for LM96163.

Unfortunately our design doesn't use the PWM at all. It is only used for
temperature measurements, so I'm not able to test any of the PWM code.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]