* [PATCH]usb: serial: pl2303: rm id
@ 2011-11-10 6:04 wangyanqing
2011-11-14 1:11 ` wangyanqing
0 siblings, 1 reply; 5+ messages in thread
From: wangyanqing @ 2011-11-10 6:04 UTC (permalink / raw)
To: gregkh; +Cc: wd, stable, linux-kernel
I get report from customer that his usb-serial
converter doesn't work well,it sometimes work,
but sometimes it doesn't.
The usb-serial converter's id:
vendor_id product_id
0x4348 0x5523
Then I search the usb-serial codes, and there are
two drivers announce support this device, pl2303
and ch341, commit 026dfaf1 cause it. Through many
times to test, ch341 works well with this device,
and pl2303 doesn't work quite often(it just work quite little).
ch341 works well with this device, so we doesn't
need pl2303 to support.I try to revert 026dfaf1 first,
but it failed. So I prepare this patch by hand to revert it.
Signed-off-by: Wang YanQing <Udknight@gmail.com>
---
drivers/usb/serial/pl2303.c | 1 -
drivers/usb/serial/pl2303.h | 4 ----
2 files changed, 0 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 9083d1e..fc2d66f 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -91,7 +91,6 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
- { USB_DEVICE(WINCHIPHEAD_VENDOR_ID, WINCHIPHEAD_USBSER_PRODUCT_ID) },
{ USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 3d10d7f..c38b8c0 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -145,10 +145,6 @@
#define ADLINK_VENDOR_ID 0x0b63
#define ADLINK_ND6530_PRODUCT_ID 0x6530
-/* WinChipHead USB->RS 232 adapter */
-#define WINCHIPHEAD_VENDOR_ID 0x4348
-#define WINCHIPHEAD_USBSER_PRODUCT_ID 0x5523
-
/* SMART USB Serial Adapter */
#define SMART_VENDOR_ID 0x0b8c
#define SMART_PRODUCT_ID 0x2303
--
1.7.3.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH]usb: serial: pl2303: rm id
2011-11-10 6:04 [PATCH]usb: serial: pl2303: rm id wangyanqing
@ 2011-11-14 1:11 ` wangyanqing
2011-11-14 3:58 ` Greg KH
0 siblings, 1 reply; 5+ messages in thread
From: wangyanqing @ 2011-11-14 1:11 UTC (permalink / raw)
To: gregkh; +Cc: wd, stable, linux-kernel
On Thu, Nov 10, 2011 at 02:04:08PM +0800, wangyanqing wrote:
> I get report from customer that his usb-serial
> converter doesn't work well,it sometimes work,
> but sometimes it doesn't.
>
> The usb-serial converter's id:
> vendor_id product_id
> 0x4348 0x5523
>
> Then I search the usb-serial codes, and there are
> two drivers announce support this device, pl2303
> and ch341, commit 026dfaf1 cause it. Through many
> times to test, ch341 works well with this device,
> and pl2303 doesn't work quite often(it just work quite little).
>
> ch341 works well with this device, so we doesn't
> need pl2303 to support.I try to revert 026dfaf1 first,
> but it failed. So I prepare this patch by hand to revert it.
>
> Signed-off-by: Wang YanQing <Udknight@gmail.com>
> ---
> drivers/usb/serial/pl2303.c | 1 -
> drivers/usb/serial/pl2303.h | 4 ----
> 2 files changed, 0 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
> index 9083d1e..fc2d66f 100644
> --- a/drivers/usb/serial/pl2303.c
> +++ b/drivers/usb/serial/pl2303.c
> @@ -91,7 +91,6 @@ static const struct usb_device_id id_table[] = {
> { USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
> { USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
> { USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
> - { USB_DEVICE(WINCHIPHEAD_VENDOR_ID, WINCHIPHEAD_USBSER_PRODUCT_ID) },
> { USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
> { } /* Terminating entry */
> };
> diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
> index 3d10d7f..c38b8c0 100644
> --- a/drivers/usb/serial/pl2303.h
> +++ b/drivers/usb/serial/pl2303.h
> @@ -145,10 +145,6 @@
> #define ADLINK_VENDOR_ID 0x0b63
> #define ADLINK_ND6530_PRODUCT_ID 0x6530
>
> -/* WinChipHead USB->RS 232 adapter */
> -#define WINCHIPHEAD_VENDOR_ID 0x4348
> -#define WINCHIPHEAD_USBSER_PRODUCT_ID 0x5523
> -
> /* SMART USB Serial Adapter */
> #define SMART_VENDOR_ID 0x0b8c
> #define SMART_PRODUCT_ID 0x2303
> --
> 1.7.3.4
>
Hi all.
Maybe it should be noticed that not only one usb-serial converter base
this chip have this issue, but there are about 50(even more) usb-serial
coverter lines have the same issue, so we can't ignore it.
Of course we can make all the drivers work well, but we should make it
useful at the first.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH]usb: serial: pl2303: rm id
2011-11-14 1:11 ` wangyanqing
@ 2011-11-14 3:58 ` Greg KH
2011-11-15 5:04 ` wangyanqing
0 siblings, 1 reply; 5+ messages in thread
From: Greg KH @ 2011-11-14 3:58 UTC (permalink / raw)
To: wangyanqing, wd, stable, linux-kernel
On Mon, Nov 14, 2011 at 09:11:30AM +0800, wangyanqing wrote:
> On Thu, Nov 10, 2011 at 02:04:08PM +0800, wangyanqing wrote:
> > I get report from customer that his usb-serial
> > converter doesn't work well,it sometimes work,
> > but sometimes it doesn't.
> >
> > The usb-serial converter's id:
> > vendor_id product_id
> > 0x4348 0x5523
> >
> > Then I search the usb-serial codes, and there are
> > two drivers announce support this device, pl2303
> > and ch341, commit 026dfaf1 cause it. Through many
> > times to test, ch341 works well with this device,
> > and pl2303 doesn't work quite often(it just work quite little).
> >
> > ch341 works well with this device, so we doesn't
> > need pl2303 to support.I try to revert 026dfaf1 first,
> > but it failed. So I prepare this patch by hand to revert it.
> >
> > Signed-off-by: Wang YanQing <Udknight@gmail.com>
> > ---
> > drivers/usb/serial/pl2303.c | 1 -
> > drivers/usb/serial/pl2303.h | 4 ----
> > 2 files changed, 0 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
> > index 9083d1e..fc2d66f 100644
> > --- a/drivers/usb/serial/pl2303.c
> > +++ b/drivers/usb/serial/pl2303.c
> > @@ -91,7 +91,6 @@ static const struct usb_device_id id_table[] = {
> > { USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
> > { USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
> > { USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
> > - { USB_DEVICE(WINCHIPHEAD_VENDOR_ID, WINCHIPHEAD_USBSER_PRODUCT_ID) },
> > { USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
> > { } /* Terminating entry */
> > };
> > diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
> > index 3d10d7f..c38b8c0 100644
> > --- a/drivers/usb/serial/pl2303.h
> > +++ b/drivers/usb/serial/pl2303.h
> > @@ -145,10 +145,6 @@
> > #define ADLINK_VENDOR_ID 0x0b63
> > #define ADLINK_ND6530_PRODUCT_ID 0x6530
> >
> > -/* WinChipHead USB->RS 232 adapter */
> > -#define WINCHIPHEAD_VENDOR_ID 0x4348
> > -#define WINCHIPHEAD_USBSER_PRODUCT_ID 0x5523
> > -
> > /* SMART USB Serial Adapter */
> > #define SMART_VENDOR_ID 0x0b8c
> > #define SMART_PRODUCT_ID 0x2303
> > --
> > 1.7.3.4
> >
> Hi all.
> Maybe it should be noticed that not only one usb-serial converter base
> this chip have this issue, but there are about 50(even more) usb-serial
> coverter lines have the same issue, so we can't ignore it.
> Of course we can make all the drivers work well, but we should make it
> useful at the first.
Why not add the device id to the other driver at the same time, that
would ensure that the device continues to work, right?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH]usb: serial: pl2303: rm id
2011-11-14 3:58 ` Greg KH
@ 2011-11-15 5:04 ` wangyanqing
2011-11-15 17:54 ` Greg KH
0 siblings, 1 reply; 5+ messages in thread
From: wangyanqing @ 2011-11-15 5:04 UTC (permalink / raw)
To: Greg KH; +Cc: wd, stable, linux-kernel
On Sun, Nov 13, 2011 at 07:58:15PM -0800, Greg KH wrote:
> On Mon, Nov 14, 2011 at 09:11:30AM +0800, wangyanqing wrote:
> > On Thu, Nov 10, 2011 at 02:04:08PM +0800, wangyanqing wrote:
> > > I get report from customer that his usb-serial
> > > converter doesn't work well,it sometimes work,
> > > but sometimes it doesn't.
> > >
> > > The usb-serial converter's id:
> > > vendor_id product_id
> > > 0x4348 0x5523
> > >
> > > Then I search the usb-serial codes, and there are
> > > two drivers announce support this device, pl2303
> > > and ch341, commit 026dfaf1 cause it. Through many
> > > times to test, ch341 works well with this device,
> > > and pl2303 doesn't work quite often(it just work quite little).
> > >
> > > ch341 works well with this device, so we doesn't
> > > need pl2303 to support.I try to revert 026dfaf1 first,
> > > but it failed. So I prepare this patch by hand to revert it.
> > >
> > > Signed-off-by: Wang YanQing <Udknight@gmail.com>
> > > ---
> > > drivers/usb/serial/pl2303.c | 1 -
> > > drivers/usb/serial/pl2303.h | 4 ----
> > > 2 files changed, 0 insertions(+), 5 deletions(-)
> > >
> > > diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
> > > index 9083d1e..fc2d66f 100644
> > > --- a/drivers/usb/serial/pl2303.c
> > > +++ b/drivers/usb/serial/pl2303.c
> > > @@ -91,7 +91,6 @@ static const struct usb_device_id id_table[] = {
> > > { USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
> > > { USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
> > > { USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
> > > - { USB_DEVICE(WINCHIPHEAD_VENDOR_ID, WINCHIPHEAD_USBSER_PRODUCT_ID) },
> > > { USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
> > > { } /* Terminating entry */
> > > };
> > > diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
> > > index 3d10d7f..c38b8c0 100644
> > > --- a/drivers/usb/serial/pl2303.h
> > > +++ b/drivers/usb/serial/pl2303.h
> > > @@ -145,10 +145,6 @@
> > > #define ADLINK_VENDOR_ID 0x0b63
> > > #define ADLINK_ND6530_PRODUCT_ID 0x6530
> > >
> > > -/* WinChipHead USB->RS 232 adapter */
> > > -#define WINCHIPHEAD_VENDOR_ID 0x4348
> > > -#define WINCHIPHEAD_USBSER_PRODUCT_ID 0x5523
> > > -
> > > /* SMART USB Serial Adapter */
> > > #define SMART_VENDOR_ID 0x0b8c
> > > #define SMART_PRODUCT_ID 0x2303
> > > --
> > > 1.7.3.4
> > >
> > Hi all.
> > Maybe it should be noticed that not only one usb-serial converter base
> > this chip have this issue, but there are about 50(even more) usb-serial
> > coverter lines have the same issue, so we can't ignore it.
> > Of course we can make all the drivers work well, but we should make it
> > useful at the first.
>
> Why not add the device id to the other driver at the same time, that
> would ensure that the device continues to work, right?
>
> thanks,
>
> greg k-h
Ok greg, thanks for your reply!
But I means maybe I make a very very "bad" subject in the email at all!
There are ch341 and pl2303 , two drivers announce to support this device,
ch341 works well and pl2303 does't work always.
Maybe I should make the email "shorter" next time.
This is the origin email.
https://lkml.org/lkml/2011/11/10/66
We don't need to add the device id to the other driver, ch341 have done it!!
Please looks at ch341.c:76 line
"
{ USB_DEVICE(0x4348, 0x5523) }, "
Thanks again.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH]usb: serial: pl2303: rm id
2011-11-15 5:04 ` wangyanqing
@ 2011-11-15 17:54 ` Greg KH
0 siblings, 0 replies; 5+ messages in thread
From: Greg KH @ 2011-11-15 17:54 UTC (permalink / raw)
To: wangyanqing, Greg KH, wd, stable, linux-kernel
On Tue, Nov 15, 2011 at 01:04:26PM +0800, wangyanqing wrote:
> On Sun, Nov 13, 2011 at 07:58:15PM -0800, Greg KH wrote:
> > On Mon, Nov 14, 2011 at 09:11:30AM +0800, wangyanqing wrote:
> > > On Thu, Nov 10, 2011 at 02:04:08PM +0800, wangyanqing wrote:
> > > > I get report from customer that his usb-serial
> > > > converter doesn't work well,it sometimes work,
> > > > but sometimes it doesn't.
> > > >
> > > > The usb-serial converter's id:
> > > > vendor_id product_id
> > > > 0x4348 0x5523
> > > >
> > > > Then I search the usb-serial codes, and there are
> > > > two drivers announce support this device, pl2303
> > > > and ch341, commit 026dfaf1 cause it. Through many
> > > > times to test, ch341 works well with this device,
> > > > and pl2303 doesn't work quite often(it just work quite little).
> > > >
> > > > ch341 works well with this device, so we doesn't
> > > > need pl2303 to support.I try to revert 026dfaf1 first,
> > > > but it failed. So I prepare this patch by hand to revert it.
> > > >
> > > > Signed-off-by: Wang YanQing <Udknight@gmail.com>
> > > > ---
> > > > drivers/usb/serial/pl2303.c | 1 -
> > > > drivers/usb/serial/pl2303.h | 4 ----
> > > > 2 files changed, 0 insertions(+), 5 deletions(-)
> > > >
> > > > diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
> > > > index 9083d1e..fc2d66f 100644
> > > > --- a/drivers/usb/serial/pl2303.c
> > > > +++ b/drivers/usb/serial/pl2303.c
> > > > @@ -91,7 +91,6 @@ static const struct usb_device_id id_table[] = {
> > > > { USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
> > > > { USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
> > > > { USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
> > > > - { USB_DEVICE(WINCHIPHEAD_VENDOR_ID, WINCHIPHEAD_USBSER_PRODUCT_ID) },
> > > > { USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
> > > > { } /* Terminating entry */
> > > > };
> > > > diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
> > > > index 3d10d7f..c38b8c0 100644
> > > > --- a/drivers/usb/serial/pl2303.h
> > > > +++ b/drivers/usb/serial/pl2303.h
> > > > @@ -145,10 +145,6 @@
> > > > #define ADLINK_VENDOR_ID 0x0b63
> > > > #define ADLINK_ND6530_PRODUCT_ID 0x6530
> > > >
> > > > -/* WinChipHead USB->RS 232 adapter */
> > > > -#define WINCHIPHEAD_VENDOR_ID 0x4348
> > > > -#define WINCHIPHEAD_USBSER_PRODUCT_ID 0x5523
> > > > -
> > > > /* SMART USB Serial Adapter */
> > > > #define SMART_VENDOR_ID 0x0b8c
> > > > #define SMART_PRODUCT_ID 0x2303
> > > > --
> > > > 1.7.3.4
> > > >
> > > Hi all.
> > > Maybe it should be noticed that not only one usb-serial converter base
> > > this chip have this issue, but there are about 50(even more) usb-serial
> > > coverter lines have the same issue, so we can't ignore it.
> > > Of course we can make all the drivers work well, but we should make it
> > > useful at the first.
> >
> > Why not add the device id to the other driver at the same time, that
> > would ensure that the device continues to work, right?
> >
> > thanks,
> >
> > greg k-h
>
> Ok greg, thanks for your reply!
> But I means maybe I make a very very "bad" subject in the email at all!
> There are ch341 and pl2303 , two drivers announce to support this device,
> ch341 works well and pl2303 does't work always.
>
> Maybe I should make the email "shorter" next time.
> This is the origin email.
> https://lkml.org/lkml/2011/11/10/66
>
> We don't need to add the device id to the other driver, ch341 have done it!!
> Please looks at ch341.c:76 line
> "
> { USB_DEVICE(0x4348, 0x5523) }, "
Ah, sorry, I missed that, I'll go queue this patch up right now, sorry
for the confusion.
greg k-h
>
> Thanks again.
>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2011-11-15 18:07 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-11-10 6:04 [PATCH]usb: serial: pl2303: rm id wangyanqing
2011-11-14 1:11 ` wangyanqing
2011-11-14 3:58 ` Greg KH
2011-11-15 5:04 ` wangyanqing
2011-11-15 17:54 ` Greg KH
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox