From: Frederic Weisbecker <fweisbec@gmail.com>
To: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: LKML <linux-kernel@vger.kernel.org>,
Josh Triplett <josh@joshtriplett.org>
Subject: Re: [PATCH 2/4] rcu: Irq nesting is always 0 on rcu_enter_idle_common
Date: Tue, 29 Nov 2011 02:00:48 +0100 [thread overview]
Message-ID: <20111129010045.GC18182@somewhere.redhat.com> (raw)
In-Reply-To: <20111129002914.GP2346@linux.vnet.ibm.com>
On Mon, Nov 28, 2011 at 04:29:14PM -0800, Paul E. McKenney wrote:
> On Mon, Nov 28, 2011 at 10:24:45PM +0100, Frederic Weisbecker wrote:
> > So pass 0 directly as a nesting value on the tracing calls.
> >
> > Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
> > Cc: Josh Triplett <josh@joshtriplett.org>
> > ---
> > kernel/rcutree.c | 5 ++---
> > 1 files changed, 2 insertions(+), 3 deletions(-)
> >
> > diff --git a/kernel/rcutree.c b/kernel/rcutree.c
> > index c2aaadf..b80cb41 100644
> > --- a/kernel/rcutree.c
> > +++ b/kernel/rcutree.c
> > @@ -350,11 +350,10 @@ static int rcu_implicit_offline_qs(struct rcu_data *rdp)
> > */
> > static void rcu_idle_enter_common(struct rcu_dynticks *rdtp)
> > {
> > - trace_rcu_dyntick("Start", rdtp->dynticks_nesting);
> > + trace_rcu_dyntick("Start", 0);
> > if (!idle_cpu(smp_processor_id())) {
> > WARN_ON_ONCE(1); /* must be idle task! */
> > - trace_rcu_dyntick("Error on entry: not idle task",
> > - rdtp->dynticks_nesting);
> > + trace_rcu_dyntick("Error on entry: not idle task", 0);
> > ftrace_dump(DUMP_ALL);
> > }
> > /* CPUs seeing atomic_inc() must see prior RCU read-side crit sects */
>
> Queued, again updating to work around the mid-air collision.
>
> Thanx, Paul
>
> ------------------------------------------------------------------------
>
> rcu: Irq nesting is always 0 on rcu_enter_idle_common
>
> Because tasks don't nest, the ->dyntick_nesting must always be zero upon
> entry to rcu_idle_enter_common(). Therefore, pass "0" rather than the
> counter itself.
And with a better changelog.
Thanks!
>
> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
> Cc: Josh Triplett <josh@joshtriplett.org>
> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
>
> diff --git a/kernel/rcutree.c b/kernel/rcutree.c
> index 54d9b4f..e0f5072 100644
> --- a/kernel/rcutree.c
> +++ b/kernel/rcutree.c
> @@ -350,12 +350,11 @@ static int rcu_implicit_offline_qs(struct rcu_data *rdp)
> */
> static void rcu_idle_enter_common(struct rcu_dynticks *rdtp, long long oldval)
> {
> - trace_rcu_dyntick("Start", oldval, rdtp->dynticks_nesting);
> + trace_rcu_dyntick("Start", oldval, 0);
> if (!is_idle_task(current)) {
> struct task_struct *idle = idle_task(smp_processor_id());
>
> - trace_rcu_dyntick("Error on entry: not idle task",
> - oldval, rdtp->dynticks_nesting);
> + trace_rcu_dyntick("Error on entry: not idle task", oldval, 0);
> ftrace_dump(DUMP_ALL);
> WARN_ONCE(1, "Current pid: %d comm: %s / Idle pid: %d comm: %s",
> current->pid, current->comm,
>
next prev parent reply other threads:[~2011-11-29 1:00 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-28 21:24 [PATCH 0/4] rcu: Make new RCU dynticks API work with nohz cpusets Frederic Weisbecker
2011-11-28 21:24 ` [PATCH 1/4] rcu: Don't check irq nesting from rcu idle entry/exit Frederic Weisbecker
2011-11-29 0:22 ` Paul E. McKenney
2011-11-29 0:26 ` Frederic Weisbecker
2011-11-29 0:39 ` Paul E. McKenney
2011-11-29 0:58 ` Frederic Weisbecker
2011-11-28 21:24 ` [PATCH 2/4] rcu: Irq nesting is always 0 on rcu_enter_idle_common Frederic Weisbecker
2011-11-29 0:29 ` Paul E. McKenney
2011-11-29 1:00 ` Frederic Weisbecker [this message]
2011-11-28 21:24 ` [PATCH 3/4 RFC] rcu: New rcu_user_enter() and rcu_user_exit() APIs Frederic Weisbecker
2011-11-28 21:24 ` [PATCH 4/4 RFC] rcu: New rcu_user_enter_irq() and rcu_user_exit_irq() APIs Frederic Weisbecker
2011-11-28 21:53 ` Josh Triplett
2011-11-29 1:00 ` Paul E. McKenney
2011-11-29 5:21 ` Josh Triplett
2011-11-29 14:05 ` Frederic Weisbecker
2011-11-29 18:23 ` Paul E. McKenney
2011-11-29 13:53 ` Frederic Weisbecker
2011-11-29 5:22 ` [PATCH 0/4] rcu: Make new RCU dynticks API work with nohz cpusets Josh Triplett
2011-11-29 5:43 ` Paul E. McKenney
2011-11-29 8:48 ` Josh Triplett
2011-11-29 17:44 ` Paul E. McKenney
2011-11-29 18:07 ` Frederic Weisbecker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111129010045.GC18182@somewhere.redhat.com \
--to=fweisbec@gmail.com \
--cc=josh@joshtriplett.org \
--cc=linux-kernel@vger.kernel.org \
--cc=paulmck@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox