From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757176Ab1LBRVo (ORCPT ); Fri, 2 Dec 2011 12:21:44 -0500 Received: from earthlight.etchedpixels.co.uk ([81.2.110.250]:40958 "EHLO earthlight.etchedpixels.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757109Ab1LBRVn (ORCPT ); Fri, 2 Dec 2011 12:21:43 -0500 Date: Fri, 2 Dec 2011 17:23:23 +0000 From: Alan Cox To: Kristoffer Ericson Cc: Patrik Jakobsson , linux-kernel@vger.kernel.org, greg@kroah.com Subject: Re: GMA500 support Message-ID: <20111202172323.34f75234@lxorguk.ukuu.org.uk> In-Reply-To: <20111124162014.GA2750@Boggieman> References: <20111121182910.GA2856@Boggieman> <20111123112847.57c20f8f@lxorguk.ukuu.org.uk> <20111124162014.GA2750@Boggieman> X-Mailer: Claws Mail 3.7.9 (GTK+ 2.24.7; x86_64-redhat-linux-gnu) Face: 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 Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org > > I suspect this is just DVI with a HDMI connector. That is the case for Fit-PC2. > > It is hooked up to the SDVO and provides video but no audio. I've now got an HDMI capable display *and* the right cables. Testing the Dell mini 10 shows that it works although it's defaulting to the wrong mode and there is stuff on the display below the picture that shouldn't be. So I now also have a debug case for the scaling or whatever is actually going on problem. Alan