From: Ingo Molnar <mingo@elte.hu>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org,
Thomas Gleixner <tglx@linutronix.de>,
Peter Zijlstra <a.p.zijlstra@chello.nl>,
Andrew Morton <akpm@linux-foundation.org>
Subject: [GIT PULL] timer fixes
Date: Mon, 5 Dec 2011 20:00:39 +0100 [thread overview]
Message-ID: <20111205190039.GA29271@elte.hu> (raw)
Linus,
Please pull the latest timers-urgent-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers-urgent-for-linus
Thanks,
Ingo
------------------>
Arve Hjønnevåg (1):
rtc: Fix some bugs that allowed accumulating time drift in suspend/resume
Rabin Vincent (1):
rtc: Disable the alarm in the hardware
Thomas Gleixner (2):
tick-broadcast: Stop active broadcast device when replacing it
clockevents: Set noop handler in clockevents_exchange_device()
Yang Honggang (Joseph) (1):
clocksource: Fix bug with max_deferment margin calculation
drivers/rtc/class.c | 10 ++++----
drivers/rtc/interface.c | 44 ++++++++++++++++++++++++++++++++---------
kernel/time/clockevents.c | 1 +
kernel/time/clocksource.c | 4 +-
kernel/time/tick-broadcast.c | 2 +-
5 files changed, 43 insertions(+), 18 deletions(-)
diff --git a/drivers/rtc/class.c b/drivers/rtc/class.c
index 01a7df5..b82a155 100644
--- a/drivers/rtc/class.c
+++ b/drivers/rtc/class.c
@@ -66,7 +66,7 @@ static int rtc_suspend(struct device *dev, pm_message_t mesg)
*/
delta = timespec_sub(old_system, old_rtc);
delta_delta = timespec_sub(delta, old_delta);
- if (abs(delta_delta.tv_sec) >= 2) {
+ if (delta_delta.tv_sec < -2 || delta_delta.tv_sec >= 2) {
/*
* if delta_delta is too large, assume time correction
* has occured and set old_delta to the current delta.
@@ -100,9 +100,8 @@ static int rtc_resume(struct device *dev)
rtc_tm_to_time(&tm, &new_rtc.tv_sec);
new_rtc.tv_nsec = 0;
- if (new_rtc.tv_sec <= old_rtc.tv_sec) {
- if (new_rtc.tv_sec < old_rtc.tv_sec)
- pr_debug("%s: time travel!\n", dev_name(&rtc->dev));
+ if (new_rtc.tv_sec < old_rtc.tv_sec) {
+ pr_debug("%s: time travel!\n", dev_name(&rtc->dev));
return 0;
}
@@ -119,7 +118,8 @@ static int rtc_resume(struct device *dev)
sleep_time = timespec_sub(sleep_time,
timespec_sub(new_system, old_system));
- timekeeping_inject_sleeptime(&sleep_time);
+ if (sleep_time.tv_sec >= 0)
+ timekeeping_inject_sleeptime(&sleep_time);
return 0;
}
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index 3195dbd..e3cf2f5 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -318,6 +318,20 @@ int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
}
EXPORT_SYMBOL_GPL(rtc_read_alarm);
+static int ___rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
+{
+ int err;
+
+ if (!rtc->ops)
+ err = -ENODEV;
+ else if (!rtc->ops->set_alarm)
+ err = -EINVAL;
+ else
+ err = rtc->ops->set_alarm(rtc->dev.parent, alarm);
+
+ return err;
+}
+
static int __rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
{
struct rtc_time tm;
@@ -341,14 +355,7 @@ static int __rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
* over right here, before we set the alarm.
*/
- if (!rtc->ops)
- err = -ENODEV;
- else if (!rtc->ops->set_alarm)
- err = -EINVAL;
- else
- err = rtc->ops->set_alarm(rtc->dev.parent, alarm);
-
- return err;
+ return ___rtc_set_alarm(rtc, alarm);
}
int rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
@@ -762,6 +769,20 @@ static int rtc_timer_enqueue(struct rtc_device *rtc, struct rtc_timer *timer)
return 0;
}
+static void rtc_alarm_disable(struct rtc_device *rtc)
+{
+ struct rtc_wkalrm alarm;
+ struct rtc_time tm;
+
+ __rtc_read_time(rtc, &tm);
+
+ alarm.time = rtc_ktime_to_tm(ktime_add(rtc_tm_to_ktime(tm),
+ ktime_set(300, 0)));
+ alarm.enabled = 0;
+
+ ___rtc_set_alarm(rtc, &alarm);
+}
+
/**
* rtc_timer_remove - Removes a rtc_timer from the rtc_device timerqueue
* @rtc rtc device
@@ -783,8 +804,10 @@ static void rtc_timer_remove(struct rtc_device *rtc, struct rtc_timer *timer)
struct rtc_wkalrm alarm;
int err;
next = timerqueue_getnext(&rtc->timerqueue);
- if (!next)
+ if (!next) {
+ rtc_alarm_disable(rtc);
return;
+ }
alarm.time = rtc_ktime_to_tm(next->expires);
alarm.enabled = 1;
err = __rtc_set_alarm(rtc, &alarm);
@@ -846,7 +869,8 @@ again:
err = __rtc_set_alarm(rtc, &alarm);
if (err == -ETIME)
goto again;
- }
+ } else
+ rtc_alarm_disable(rtc);
mutex_unlock(&rtc->ops_lock);
}
diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c
index 1ecd6ba..c4eb71c 100644
--- a/kernel/time/clockevents.c
+++ b/kernel/time/clockevents.c
@@ -387,6 +387,7 @@ void clockevents_exchange_device(struct clock_event_device *old,
* released list and do a notify add later.
*/
if (old) {
+ old->event_handler = clockevents_handle_noop;
clockevents_set_mode(old, CLOCK_EVT_MODE_UNUSED);
list_del(&old->list);
list_add(&old->list, &clockevents_released);
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index cfc65e1..da2f760 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -548,7 +548,7 @@ static u64 clocksource_max_deferment(struct clocksource *cs)
* note a margin of 12.5% is used because this can be computed with
* a shift, versus say 10% which would require division.
*/
- return max_nsecs - (max_nsecs >> 5);
+ return max_nsecs - (max_nsecs >> 3);
}
#ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
@@ -669,7 +669,7 @@ void __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq)
* ~ 0.06ppm granularity for NTP. We apply the same 12.5%
* margin as we do in clocksource_max_deferment()
*/
- sec = (cs->mask - (cs->mask >> 5));
+ sec = (cs->mask - (cs->mask >> 3));
do_div(sec, freq);
do_div(sec, scale);
if (!sec)
diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c
index f954282..fd4a7b1 100644
--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -71,7 +71,7 @@ int tick_check_broadcast_device(struct clock_event_device *dev)
(dev->features & CLOCK_EVT_FEAT_C3STOP))
return 0;
- clockevents_exchange_device(NULL, dev);
+ clockevents_exchange_device(tick_broadcast_device.evtdev, dev);
tick_broadcast_device.evtdev = dev;
if (!cpumask_empty(tick_get_broadcast_mask()))
tick_broadcast_start_periodic(dev);
next reply other threads:[~2011-12-05 19:02 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-05 19:00 Ingo Molnar [this message]
-- strict thread matches above, loose matches on Subject: below --
2025-04-10 21:34 [GIT PULL] timer fixes Ingo Molnar
2025-04-10 22:52 ` pr-tracker-bot
2025-02-08 9:27 Ingo Molnar
2025-02-08 20:07 ` pr-tracker-bot
2024-04-14 8:42 Ingo Molnar
2024-04-14 18:48 ` pr-tracker-bot
2024-04-07 8:03 Ingo Molnar
2024-04-07 16:44 ` pr-tracker-bot
2023-01-12 14:44 Ingo Molnar
2023-01-12 23:01 ` pr-tracker-bot
2022-08-13 10:25 Ingo Molnar
2022-08-13 16:25 ` Borislav Petkov
2022-08-13 20:27 ` Linus Torvalds
2022-08-14 8:57 ` Ingo Molnar
2022-08-14 12:41 ` Borislav Petkov
2022-08-14 17:24 ` Paul E. McKenney
2022-08-14 17:42 ` Borislav Petkov
2022-08-13 21:48 ` pr-tracker-bot
2020-12-27 9:26 Ingo Molnar
2020-12-27 17:27 ` pr-tracker-bot
2019-12-17 11:55 Ingo Molnar
2019-12-17 19:14 ` Linus Torvalds
2019-12-17 19:30 ` Peter Zijlstra
2019-12-17 20:16 ` Linus Torvalds
2019-12-17 20:35 ` Peter Zijlstra
2019-12-17 20:43 ` Linus Torvalds
2019-12-17 20:54 ` Peter Zijlstra
2019-12-17 19:20 ` pr-tracker-bot
2019-05-16 16:09 Ingo Molnar
2019-05-16 18:20 ` pr-tracker-bot
2019-04-20 7:45 Ingo Molnar
2019-04-20 19:25 ` pr-tracker-bot
2018-07-13 20:01 Ingo Molnar
2017-03-07 20:36 Ingo Molnar
2016-10-28 8:38 Ingo Molnar
2016-08-18 20:46 Ingo Molnar
2016-08-12 19:43 Ingo Molnar
2016-01-14 10:12 Ingo Molnar
2015-10-03 10:20 Ingo Molnar
2015-09-17 8:13 Ingo Molnar
2015-03-28 13:50 Ingo Molnar
2015-03-17 16:50 Ingo Molnar
2015-03-01 17:06 Ingo Molnar
2013-12-17 13:52 Ingo Molnar
2013-09-28 18:19 Ingo Molnar
2013-08-19 9:41 Ingo Molnar
2013-02-26 11:32 Ingo Molnar
2012-09-21 19:12 Ingo Molnar
2012-08-03 16:47 Ingo Molnar
2011-12-20 19:25 Ingo Molnar
2011-06-19 8:51 Ingo Molnar
2011-06-13 9:55 Ingo Molnar
2011-06-06 19:10 [GIT pull] " Thomas Gleixner
2011-05-20 17:52 Thomas Gleixner
2011-04-19 16:03 [GIT PULL] " Ingo Molnar
2011-04-16 10:09 Ingo Molnar
2011-04-07 17:42 Ingo Molnar
2011-02-06 12:06 Ingo Molnar
2011-01-24 13:24 Ingo Molnar
2010-11-26 13:40 Ingo Molnar
2010-03-26 15:34 Ingo Molnar
2009-12-18 18:49 Ingo Molnar
2009-10-08 18:35 Ingo Molnar
2009-08-25 18:04 Ingo Molnar
2009-06-26 19:03 Ingo Molnar
2009-04-09 15:43 Ingo Molnar
2009-01-30 23:07 [git pull] " Ingo Molnar
2009-01-26 17:21 Ingo Molnar
2009-01-06 16:18 Ingo Molnar
2008-12-04 20:52 Ingo Molnar
2008-11-11 18:47 Ingo Molnar
2008-09-23 19:41 Ingo Molnar
2008-09-17 9:59 Ingo Molnar
2008-08-25 17:52 Ingo Molnar
2008-08-22 12:24 Ingo Molnar
2008-07-24 15:18 Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111205190039.GA29271@elte.hu \
--to=mingo@elte.hu \
--cc=a.p.zijlstra@chello.nl \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).