Re: [PATCH 1/2] MFD: MAX77693: add MAX77693 MFD driver

[Mark Brown <broonie@opensource.wolfsonmicro.com>]

On Fri, Dec 09, 2011 at 06:15:39PM +0900, Donggeun Kim wrote:

Overall this looks good - a few small nits below.

> +int max77693_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest)
> +{
> +	struct max77693_dev *max77693 = i2c_get_clientdata(i2c);
> +	int ret;
> +
> +	mutex_lock(&max77693->iolock);
> +	ret = i2c_smbus_read_byte_data(i2c, reg);
> +	mutex_unlock(&max77693->iolock);
> +	if (ret < 0)
> +		return ret;

Might be worth considering regmap - should be a bit less code and the
register cache is likely to make performance a bit better.

> +	if (max77693_read_reg(i2c, MAX77693_PMIC_REG_PMIC_ID2, &reg_data) < 0) {
> +		dev_err(max77693->dev,
> +			"device not found on this channel\n");
> +		ret = -ENODEV;
> +		goto err;
> +	}

I'd suggest also verifying that the ID register has the expected value.
If there's a chip reision register logging it can be helpful.

> +	max77693->muic = i2c_new_dummy(i2c->adapter, I2C_ADDR_MUIC);
> +	i2c_set_clientdata(max77693->muic, max77693);
> +
> +	max77693->haptic = i2c_new_dummy(i2c->adapter, I2C_ADDR_HAPTIC);
> +	i2c_set_clientdata(max77693->haptic, max77693);

> +	pm_runtime_set_active(max77693->dev);


> +	kfree(max77693);

devm_kzalloc().