From: Ingo Molnar <mingo@elte.hu>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org,
Thomas Gleixner <tglx@linutronix.de>,
Peter Zijlstra <a.p.zijlstra@chello.nl>,
Andrew Morton <akpm@linux-foundation.org>
Subject: [GIT PULL] timer fixes
Date: Tue, 20 Dec 2011 20:25:43 +0100 [thread overview]
Message-ID: <20111220192543.GA16145@elte.hu> (raw)
Linus,
Please pull the latest timers-urgent-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers-urgent-for-linus
Thanks,
Ingo
------------------>
John Stultz (1):
rtc: m41t80: Workaround broken alarm functionality
Kusanagi Kouichi (1):
time/clocksource: Fix kernel-doc warnings
NeilBrown (1):
rtc: Expire alarms after the time is set.
drivers/rtc/interface.c | 6 ++++++
drivers/rtc/rtc-m41t80.c | 9 +++++++++
include/linux/clocksource.h | 11 ++++++++---
kernel/time/clocksource.c | 12 +++++++++---
4 files changed, 32 insertions(+), 6 deletions(-)
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index fa4d9f3..3bcc7cf 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -73,6 +73,8 @@ int rtc_set_time(struct rtc_device *rtc, struct rtc_time *tm)
err = -EINVAL;
mutex_unlock(&rtc->ops_lock);
+ /* A timer might have just expired */
+ schedule_work(&rtc->irqwork);
return err;
}
EXPORT_SYMBOL_GPL(rtc_set_time);
@@ -112,6 +114,8 @@ int rtc_set_mmss(struct rtc_device *rtc, unsigned long secs)
err = -EINVAL;
mutex_unlock(&rtc->ops_lock);
+ /* A timer might have just expired */
+ schedule_work(&rtc->irqwork);
return err;
}
@@ -403,6 +407,8 @@ int rtc_initialize_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
timerqueue_add(&rtc->timerqueue, &rtc->aie_timer.node);
}
mutex_unlock(&rtc->ops_lock);
+ /* maybe that was in the past.*/
+ schedule_work(&rtc->irqwork);
return err;
}
EXPORT_SYMBOL_GPL(rtc_initialize_alarm);
diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c
index eda128f..64aedd8 100644
--- a/drivers/rtc/rtc-m41t80.c
+++ b/drivers/rtc/rtc-m41t80.c
@@ -357,10 +357,19 @@ static int m41t80_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *t)
static struct rtc_class_ops m41t80_rtc_ops = {
.read_time = m41t80_rtc_read_time,
.set_time = m41t80_rtc_set_time,
+ /*
+ * XXX - m41t80 alarm functionality is reported broken.
+ * until it is fixed, don't register alarm functions.
+ *
.read_alarm = m41t80_rtc_read_alarm,
.set_alarm = m41t80_rtc_set_alarm,
+ */
.proc = m41t80_rtc_proc,
+ /*
+ * See above comment on broken alarm
+ *
.alarm_irq_enable = m41t80_rtc_alarm_irq_enable,
+ */
};
#if defined(CONFIG_RTC_INTF_SYSFS) || defined(CONFIG_RTC_INTF_SYSFS_MODULE)
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index c86c940..081147d 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -71,7 +71,7 @@ struct timecounter {
/**
* cyclecounter_cyc2ns - converts cycle counter cycles to nanoseconds
- * @tc: Pointer to cycle counter.
+ * @cc: Pointer to cycle counter.
* @cycles: Cycles
*
* XXX - This could use some mult_lxl_ll() asm optimization. Same code
@@ -114,7 +114,7 @@ extern u64 timecounter_read(struct timecounter *tc);
* time base as values returned by
* timecounter_read()
* @tc: Pointer to time counter.
- * @cycle: a value returned by tc->cc->read()
+ * @cycle_tstamp: a value returned by tc->cc->read()
*
* Cycle counts that are converted correctly as long as they
* fall into the interval [-1/2 max cycle count, +1/2 max cycle count],
@@ -156,11 +156,12 @@ extern u64 timecounter_cyc2time(struct timecounter *tc,
* @mult: cycle to nanosecond multiplier
* @shift: cycle to nanosecond divisor (power of two)
* @max_idle_ns: max idle time permitted by the clocksource (nsecs)
- * @maxadj maximum adjustment value to mult (~11%)
+ * @maxadj: maximum adjustment value to mult (~11%)
* @flags: flags describing special properties
* @archdata: arch-specific data
* @suspend: suspend function for the clocksource, if necessary
* @resume: resume function for the clocksource, if necessary
+ * @cycle_last: most recent cycle counter value seen by ::read()
*/
struct clocksource {
/*
@@ -187,6 +188,7 @@ struct clocksource {
void (*suspend)(struct clocksource *cs);
void (*resume)(struct clocksource *cs);
+ /* private: */
#ifdef CONFIG_CLOCKSOURCE_WATCHDOG
/* Watchdog related data, used by the framework */
struct list_head wd_list;
@@ -261,6 +263,9 @@ static inline u32 clocksource_hz2mult(u32 hz, u32 shift_constant)
/**
* clocksource_cyc2ns - converts clocksource cycles to nanoseconds
+ * @cycles: cycles
+ * @mult: cycle to nanosecond multiplier
+ * @shift: cycle to nanosecond divisor (power of two)
*
* Converts cycles to nanoseconds, using the given mult and shift.
*
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index da2f760..d3ad022 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -647,7 +647,7 @@ static void clocksource_enqueue(struct clocksource *cs)
/**
* __clocksource_updatefreq_scale - Used update clocksource with new freq
- * @t: clocksource to be registered
+ * @cs: clocksource to be registered
* @scale: Scale factor multiplied against freq to get clocksource hz
* @freq: clocksource frequency (cycles per second) divided by scale
*
@@ -699,7 +699,7 @@ EXPORT_SYMBOL_GPL(__clocksource_updatefreq_scale);
/**
* __clocksource_register_scale - Used to install new clocksources
- * @t: clocksource to be registered
+ * @cs: clocksource to be registered
* @scale: Scale factor multiplied against freq to get clocksource hz
* @freq: clocksource frequency (cycles per second) divided by scale
*
@@ -727,7 +727,7 @@ EXPORT_SYMBOL_GPL(__clocksource_register_scale);
/**
* clocksource_register - Used to install new clocksources
- * @t: clocksource to be registered
+ * @cs: clocksource to be registered
*
* Returns -EBUSY if registration fails, zero otherwise.
*/
@@ -761,6 +761,8 @@ static void __clocksource_change_rating(struct clocksource *cs, int rating)
/**
* clocksource_change_rating - Change the rating of a registered clocksource
+ * @cs: clocksource to be changed
+ * @rating: new rating
*/
void clocksource_change_rating(struct clocksource *cs, int rating)
{
@@ -772,6 +774,7 @@ EXPORT_SYMBOL(clocksource_change_rating);
/**
* clocksource_unregister - remove a registered clocksource
+ * @cs: clocksource to be unregistered
*/
void clocksource_unregister(struct clocksource *cs)
{
@@ -787,6 +790,7 @@ EXPORT_SYMBOL(clocksource_unregister);
/**
* sysfs_show_current_clocksources - sysfs interface for current clocksource
* @dev: unused
+ * @attr: unused
* @buf: char buffer to be filled with clocksource list
*
* Provides sysfs interface for listing current clocksource.
@@ -807,6 +811,7 @@ sysfs_show_current_clocksources(struct sys_device *dev,
/**
* sysfs_override_clocksource - interface for manually overriding clocksource
* @dev: unused
+ * @attr: unused
* @buf: name of override clocksource
* @count: length of buffer
*
@@ -842,6 +847,7 @@ static ssize_t sysfs_override_clocksource(struct sys_device *dev,
/**
* sysfs_show_available_clocksources - sysfs interface for listing clocksource
* @dev: unused
+ * @attr: unused
* @buf: char buffer to be filled with clocksource list
*
* Provides sysfs interface for listing registered clocksources
next reply other threads:[~2011-12-20 19:27 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-20 19:25 Ingo Molnar [this message]
-- strict thread matches above, loose matches on Subject: below --
2025-04-10 21:34 [GIT PULL] timer fixes Ingo Molnar
2025-04-10 22:52 ` pr-tracker-bot
2025-02-08 9:27 Ingo Molnar
2025-02-08 20:07 ` pr-tracker-bot
2024-04-14 8:42 Ingo Molnar
2024-04-14 18:48 ` pr-tracker-bot
2024-04-07 8:03 Ingo Molnar
2024-04-07 16:44 ` pr-tracker-bot
2023-01-12 14:44 Ingo Molnar
2023-01-12 23:01 ` pr-tracker-bot
2022-08-13 10:25 Ingo Molnar
2022-08-13 16:25 ` Borislav Petkov
2022-08-13 20:27 ` Linus Torvalds
2022-08-14 8:57 ` Ingo Molnar
2022-08-14 12:41 ` Borislav Petkov
2022-08-14 17:24 ` Paul E. McKenney
2022-08-14 17:42 ` Borislav Petkov
2022-08-13 21:48 ` pr-tracker-bot
2020-12-27 9:26 Ingo Molnar
2020-12-27 17:27 ` pr-tracker-bot
2019-12-17 11:55 Ingo Molnar
2019-12-17 19:14 ` Linus Torvalds
2019-12-17 19:30 ` Peter Zijlstra
2019-12-17 20:16 ` Linus Torvalds
2019-12-17 20:35 ` Peter Zijlstra
2019-12-17 20:43 ` Linus Torvalds
2019-12-17 20:54 ` Peter Zijlstra
2019-12-17 19:20 ` pr-tracker-bot
2019-05-16 16:09 Ingo Molnar
2019-05-16 18:20 ` pr-tracker-bot
2019-04-20 7:45 Ingo Molnar
2019-04-20 19:25 ` pr-tracker-bot
2018-07-13 20:01 Ingo Molnar
2017-03-07 20:36 Ingo Molnar
2016-10-28 8:38 Ingo Molnar
2016-08-18 20:46 Ingo Molnar
2016-08-12 19:43 Ingo Molnar
2016-01-14 10:12 Ingo Molnar
2015-10-03 10:20 Ingo Molnar
2015-09-17 8:13 Ingo Molnar
2015-03-28 13:50 Ingo Molnar
2015-03-17 16:50 Ingo Molnar
2015-03-01 17:06 Ingo Molnar
2013-12-17 13:52 Ingo Molnar
2013-09-28 18:19 Ingo Molnar
2013-08-19 9:41 Ingo Molnar
2013-02-26 11:32 Ingo Molnar
2012-09-21 19:12 Ingo Molnar
2012-08-03 16:47 Ingo Molnar
2011-12-05 19:00 Ingo Molnar
2011-06-19 8:51 Ingo Molnar
2011-06-13 9:55 Ingo Molnar
2011-06-06 19:10 [GIT pull] " Thomas Gleixner
2011-05-20 17:52 Thomas Gleixner
2011-04-19 16:03 [GIT PULL] " Ingo Molnar
2011-04-16 10:09 Ingo Molnar
2011-04-07 17:42 Ingo Molnar
2011-02-06 12:06 Ingo Molnar
2011-01-24 13:24 Ingo Molnar
2010-11-26 13:40 Ingo Molnar
2010-03-26 15:34 Ingo Molnar
2009-12-18 18:49 Ingo Molnar
2009-10-08 18:35 Ingo Molnar
2009-08-25 18:04 Ingo Molnar
2009-06-26 19:03 Ingo Molnar
2009-04-09 15:43 Ingo Molnar
2009-01-30 23:07 [git pull] " Ingo Molnar
2009-01-26 17:21 Ingo Molnar
2009-01-06 16:18 Ingo Molnar
2008-12-04 20:52 Ingo Molnar
2008-11-11 18:47 Ingo Molnar
2008-09-23 19:41 Ingo Molnar
2008-09-17 9:59 Ingo Molnar
2008-08-25 17:52 Ingo Molnar
2008-08-22 12:24 Ingo Molnar
2008-07-24 15:18 Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111220192543.GA16145@elte.hu \
--to=mingo@elte.hu \
--cc=a.p.zijlstra@chello.nl \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).