From: Ram Pai <linuxram@us.ibm.com>
To: Yinghai Lu <yinghai@kernel.org>
Cc: "Rogério Brito" <rbrito@ime.usp.br>,
"Linus Torvalds" <torvalds@linux-foundation.org>,
"Jesse Barnes" <jbarnes@virtuousgeek.org>,
"Ivan Kokshaysky" <ink@jurassic.park.msu.ru>,
"Edward Donovan" <edward.donovan@numble.net>,
"Thomas Gleixner" <tglx@linutronix.de>,
"Bjorn Helgaas" <bhelgaas@google.com>,
linux-kernel@vger.kernel.org,
"Márcia Coutinho de Brito" <mcbrito@gmail.com>,
"Ram Pai" <linuxram@us.ibm.com>,
rui.zhang@intel.com
Subject: Re: [Bug 41722] Clevo M5X0JE hangs in ACPI init
Date: Sat, 21 Jan 2012 17:26:05 +0800 [thread overview]
Message-ID: <20120121092605.GA2313@ram-ThinkPad-T61> (raw)
In-Reply-To: <CAE9FiQWi5pMaKtyf_kwszO_m7fb15=d_2GpupNnSvbN61=X6bQ@mail.gmail.com>
On Thu, Jan 19, 2012 at 11:48:29AM -0800, Yinghai Lu wrote:
> 2012/1/19 Rogério Brito <rbrito@ime.usp.br>:
> >
> > OK, now it seems that we are getting farther. The system boots, even
> > mounts the root filesystem, udev starts and, then, when it seems that
> > some USB messages are going to appear on the screen, the notebook
> > crashes with the same distortion that happened before (with some of
> > the last messages appearing being related to OHCI).
>
> in that case, Can you try to disable OHCI in .config
>
> CONFIG_USB_OHCI_HCD
>
> OHCI controller 00:0b.0 is using
> Memory at b0004000 (32-bit, non-prefetchable) [size=4K]
>
> VGA controller 00:05.0
> Memory at b2000000 (32-bit, non-prefetchable) [size=16M]
> Memory at c0000000 (64-bit, prefetchable) [size=256M]
> Memory at b1000000 (64-bit, non-prefetchable) [size=16M]
> [virtual] Expansion ROM at 80000000 [disabled] [size=128K]
>
> it seems not related. or could be ioremap etc have problem?
>
> So can you try to boot with nopat?
Yinghai/Bjorn,
After carefully examination of the allocations done by the vanilla upstream
kernel; the one without the 'skip transparent bridge while sizing' code,
I find that the allocation to one of the Bar; BAR[16], of the CardBus Bridge at 05:07.0
does not overlap that of the parent transparent bridge at 00:10.0
Here is what I see in the video at
http://www.youtube.com/watch?v=_dYhkWHfep0&feature=youtu.be
[268.002554] pci 0000:05:07.0: Cardbus bridge to [bus 06-09]
[269.002582] pci 0000:05:07.0: bridge window [io 0x1400-0x14ff]
[270.009090] pci 0000:05:07.0: bridge window [io 0x1000-0x10ff]
[271.012358] pci 0000:05:07.0: bridge window [mem 0x84000000-0x87ffffff pref]
[272.015626] pci 0000:05:07.0: bridge window [mem 0x88000000-0x8bffffff]
^^^^^^^^^^^^^^^^^^^^^^^^^^^^ offending allocation
[273.018894] pci 0000:00:10.0: PCI bridge to [bus 05-06]
[274.022162] pci 0000:00:10.0: bridge window [io 0x1000-0x1fff]
[275.025430] pci 0000:00:10.0: bridge window [mem 0xb3200000-0xb32fffff]
[276.028698] pci 0000:00:10.0: bridge window [mem 0xb8400000-0x87ffffff pref]
To me, the issue seems to be that due to some reason the OS either fails to Or does not try to
reallocate the addresses assigned to the the non-pref mem BAR of the the transparent bridge
at 00:10.0.
In any case since you have deeper knowledge in this area, I will let you verify my theory.
RP
>
> Thanks
>
> Yinghai
next prev parent reply other threads:[~2012-01-21 9:26 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <bug-41722-5003@https.bugzilla.kernel.org/>
[not found] ` <201109062222.p86MMlK9023363@demeter2.kernel.org>
2012-01-07 1:31 ` [Bug 41722] Clevo M5X0JE hangs in ACPI init Rogério Brito
2012-01-07 1:50 ` Linus Torvalds
2012-01-07 4:19 ` Edward Donovan
2012-01-08 22:27 ` Rogério Brito
2012-01-09 4:20 ` Bjorn Helgaas
2012-01-10 2:12 ` Rogério Brito
2012-01-08 22:13 ` Rogério Brito
2012-01-08 22:23 ` Linus Torvalds
2012-01-09 19:22 ` Jesse Barnes
2012-01-09 19:41 ` Linus Torvalds
2012-01-10 1:32 ` Yinghai Lu
2012-01-10 2:41 ` Rogério Brito
2012-01-10 5:07 ` Yinghai Lu
2012-01-11 7:04 ` Rogério Brito
2012-01-12 5:06 ` Yinghai Lu
2012-01-13 11:59 ` Rogério Brito
2012-01-13 17:29 ` Yinghai Lu
2012-01-13 22:24 ` Yinghai Lu
2012-01-14 2:01 ` Rogério Brito
2012-01-14 7:09 ` Rogério Brito
2012-01-14 21:05 ` Yinghai Lu
2012-01-16 23:08 ` Bjorn Helgaas
2012-01-19 3:50 ` Rogério Brito
2012-01-19 5:06 ` Yinghai Lu
2012-01-19 13:48 ` Rogério Brito
2012-01-19 16:12 ` Yinghai Lu
2012-01-19 16:15 ` Rogério Brito
2012-01-19 17:20 ` Rogério Brito
2012-01-19 19:48 ` Yinghai Lu
2012-01-21 9:26 ` Ram Pai [this message]
2012-01-21 10:35 ` Yinghai Lu
2012-01-24 22:18 ` Rogério Brito
2012-01-24 22:53 ` Bjorn Helgaas
2012-01-25 0:19 ` Yinghai Lu
2012-01-25 0:34 ` Linus Torvalds
2012-01-25 0:57 ` Yinghai Lu
2012-01-25 1:55 ` Rogério Brito
2012-01-25 2:33 ` Rogério Brito
2012-01-25 2:39 ` Rogério Brito
2012-01-25 23:58 ` Rogério Brito
2012-01-26 2:03 ` Yinghai Lu
2012-01-26 11:16 ` Rogério Brito
2012-01-27 3:41 ` Bjorn Helgaas
2012-02-06 23:11 ` Bjorn Helgaas
2012-02-07 0:21 ` Rogério Brito
2012-01-27 6:53 ` Yinghai Lu
2012-01-10 5:24 ` Bjorn Helgaas
2012-01-11 7:05 ` Rogério Brito
2012-01-11 10:45 ` Ram Pai
2012-01-10 1:57 ` Rogério Brito
2012-01-10 9:25 ` Edward Donovan
2012-01-11 7:15 ` Rogério Brito
2012-01-08 0:55 ` Márcia Brito
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120121092605.GA2313@ram-ThinkPad-T61 \
--to=linuxram@us.ibm.com \
--cc=bhelgaas@google.com \
--cc=edward.donovan@numble.net \
--cc=ink@jurassic.park.msu.ru \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mcbrito@gmail.com \
--cc=rbrito@ime.usp.br \
--cc=rui.zhang@intel.com \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox