From: Norbert Preining <preining@logic.at>
To: linux-kernel@vger.kernel.org
Subject: Regression 3.2 -> 3.3-rc1 10 sec hang at boot and resume, COMRESET failed
Date: Thu, 2 Feb 2012 14:12:58 +0900 [thread overview]
Message-ID: <20120202051258.GA15550@gamma.logic.tuwien.ac.at> (raw)
Dear all,
(please Cc)
since going from 3.2 to 3.3-rc1 I see a kind of regression wrt booting
time, namely the detection of the CD drive hangs for 10sec (both
dmesg were taken on the same hardware on the same day):
with 3.3-rc1 and rc2:
[ 3.694012] sd 0:0:0:0: [sda] Attached SCSI disk
[ 9.004013] ata2: link is slow to respond, please be patient (ready=0)
[ 13.652013] ata2: COMRESET failed (errno=-16)
[ 13.972022] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 13.975721] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 13.977166] ata2.00: ATAPI: MATSHITADVD-RAM UJ862AS, 1.21, max UDMA/33
[ 13.981294] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 13.982734] ata2.00: configured for UDMA/33
[ 13.987964] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ862AS 1.21 PQ: 0 ANSI: 5
[ 13.991482] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 13.992971] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 13.994574] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 13.994672] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 14.316021] ata5: SATA link down (SStatus 0 SControl 300)
[ 14.636019] ata6: SATA link down (SStatus 0 SControl 300)
with 3.2:
[ 3.218156] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.484023] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.487708] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3.489156] ata2.00: ATAPI: MATSHITADVD-RAM UJ862AS, 1.21, max UDMA/33
[ 3.494321] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3.495761] ata2.00: configured for UDMA/33
[ 3.501057] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ862AS 1.21 PQ: 0 ANSI: 5
[ 3.504515] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.505995] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.507611] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.507715] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.828025] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.148020] ata6: SATA link down (SStatus 0 SControl 300)
Is there anything I can do here?
Best wishes
Norbert
------------------------------------------------------------------------
Norbert Preining preining@{jaist.ac.jp, logic.at, debian.org}
JAIST, Japan TeX Live & Debian Developer
DSA: 0x09C5B094 fp: 14DF 2E6C 0307 BE6D AD76 A9C0 D2BF 4AA3 09C5 B094
------------------------------------------------------------------------
LLANELLI (adj.)
Descriptive of the waggling movement of a person's hands when shaking
water from them or warming up for a piece of workshop theatre.
--- Douglas Adams, The Meaning of Liff
next reply other threads:[~2012-02-02 5:13 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-02 5:12 Norbert Preining [this message]
2012-02-02 8:38 ` Regression 3.2 -> 3.3-rc1 10 sec hang at boot and resume, COMRESET failed Srivatsa S. Bhat
2012-02-03 1:15 ` Lin Ming
2012-02-03 4:21 ` Lin Ming
2012-02-03 4:29 ` Norbert Preining
2012-02-03 4:29 ` Norbert Preining
2012-02-03 5:24 ` Norbert Preining
2012-02-03 5:34 ` Lin Ming
2012-02-03 5:43 ` Norbert Preining
2012-02-03 8:27 ` Lin Ming
2012-02-06 0:46 ` Norbert Preining
2012-02-06 1:36 ` Lin Ming
2012-02-06 2:40 ` Norbert Preining
2012-02-06 2:49 ` Lin Ming
2012-02-06 3:15 ` Norbert Preining
2012-02-06 4:42 ` Lin Ming
2012-02-06 16:19 ` Tejun Heo
2012-02-06 19:20 ` Brian Norris
2012-02-06 22:46 ` Norbert Preining
2012-02-08 9:10 ` Valdis.Kletnieks
2012-02-13 17:44 ` Tejun Heo
2012-02-15 5:15 ` Brian Norris
2012-02-15 16:57 ` Tejun Heo
2012-02-15 18:29 ` Jeff Garzik
2012-02-15 18:31 ` Tejun Heo
2012-02-15 19:18 ` Jeff Garzik
2012-02-15 23:39 ` Brian Norris
2012-02-16 16:22 ` Jeff Garzik
2012-02-16 14:20 ` Mark Lord
2012-02-16 16:19 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120202051258.GA15550@gamma.logic.tuwien.ac.at \
--to=preining@logic.at \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).