Re: [PATCH V6 2/3] gpio: Add support for Intel ICHx/3100/Series[56] GPIO

[Grant Likely <grant.likely@secretlab.ca>]

On Wed, 07 Mar 2012 11:41:38 -0600 (CST), Aaron Sierra <asierra@xes-inc.com> wrote:
> From: Peter Tyser <ptyser@xes-inc.com>
> 
> This driver works on many Intel chipsets, including the ICH6, ICH7,
> ICH8, ICH9, ICH10, 3100, Series 5/3400 (Ibex Peak), Series 6/C200
> (Cougar Point), and NM10 (Tiger Point).
> 
> Additional Intel chipsets should be easily supported if needed, eg the
> ICH1-5, EP80579, etc.
> 
> Tested on QM67 (Cougar Point), QM57 (Ibex Peak), 3100 (Whitmore Lake),
> and NM10 (Tiger Point).
> 
> Includes work from Jean Delvare:
> 	- Resource leak removal during module load/unload
> 	- GPIO API bit value enforcement
> 
> Also includes code cleanup from Guenter Roeck and Grant Likely.
> 
> Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
> Signed-off-by: Aaron Sierra <asierra@xes-inc.com>

Acked-by: Grant Likely <grant.likely@secretlab.ca>

It looks like this depends on the mfd patch for the header file, so this should
be merged via the mfd tree.

g.

> ---
>  MAINTAINERS             |    6 +
>  drivers/gpio/Kconfig    |   13 ++
>  drivers/gpio/Makefile   |    1 +
>  drivers/gpio/gpio-ich.c |  419 +++++++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 439 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/gpio/gpio-ich.c
>