From: Greg KH <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: torvalds@linux-foundation.org, akpm@linux-foundation.org,
alan@lxorguk.ukuu.org.uk, Ben McKeegan <ben@netservers.co.uk>,
"David S. Miller" <davem@davemloft.net>
Subject: [ 17/41] ppp: fix ppp_mp_reconstruct bad seq errors
Date: Fri, 16 Mar 2012 16:38:27 -0700 [thread overview]
Message-ID: <20120316233812.134810131@linuxfoundation.org> (raw)
In-Reply-To: <20120316233829.GA14022@kroah.com>
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ben McKeegan <ben@netservers.co.uk>
[ Upstream commit 8a49ad6e89feb5015e77ce6efeb2678947117e20 ]
This patch fixes a (mostly cosmetic) bug introduced by the patch
'ppp: Use SKB queue abstraction interfaces in fragment processing'
found here: http://www.spinics.net/lists/netdev/msg153312.html
The above patch rewrote and moved the code responsible for cleaning
up discarded fragments but the new code does not catch every case
where this is necessary. This results in some discarded fragments
remaining in the queue, and triggering a 'bad seq' error on the
subsequent call to ppp_mp_reconstruct. Fragments are discarded
whenever other fragments of the same frame have been lost.
This can generate a lot of unwanted and misleading log messages.
This patch also adds additional detail to the debug logging to
make it clearer which fragments were lost and which other fragments
were discarded as a result of losses. (Run pppd with 'kdebug 1'
option to enable debug logging.)
Signed-off-by: Ben McKeegan <ben@netservers.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ppp/ppp_generic.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
--- a/drivers/net/ppp/ppp_generic.c
+++ b/drivers/net/ppp/ppp_generic.c
@@ -2024,14 +2024,22 @@ ppp_mp_reconstruct(struct ppp *ppp)
continue;
}
if (PPP_MP_CB(p)->sequence != seq) {
+ u32 oldseq;
/* Fragment `seq' is missing. If it is after
minseq, it might arrive later, so stop here. */
if (seq_after(seq, minseq))
break;
/* Fragment `seq' is lost, keep going. */
lost = 1;
+ oldseq = seq;
seq = seq_before(minseq, PPP_MP_CB(p)->sequence)?
minseq + 1: PPP_MP_CB(p)->sequence;
+
+ if (ppp->debug & 1)
+ netdev_printk(KERN_DEBUG, ppp->dev,
+ "lost frag %u..%u\n",
+ oldseq, seq-1);
+
goto again;
}
@@ -2076,6 +2084,10 @@ ppp_mp_reconstruct(struct ppp *ppp)
struct sk_buff *tmp2;
skb_queue_reverse_walk_from_safe(list, p, tmp2) {
+ if (ppp->debug & 1)
+ netdev_printk(KERN_DEBUG, ppp->dev,
+ "discarding frag %u\n",
+ PPP_MP_CB(p)->sequence);
__skb_unlink(p, list);
kfree_skb(p);
}
@@ -2091,6 +2103,17 @@ ppp_mp_reconstruct(struct ppp *ppp)
/* If we have discarded any fragments,
signal a receive error. */
if (PPP_MP_CB(head)->sequence != ppp->nextseq) {
+ skb_queue_walk_safe(list, p, tmp) {
+ if (p == head)
+ break;
+ if (ppp->debug & 1)
+ netdev_printk(KERN_DEBUG, ppp->dev,
+ "discarding frag %u\n",
+ PPP_MP_CB(p)->sequence);
+ __skb_unlink(p, list);
+ kfree_skb(p);
+ }
+
if (ppp->debug & 1)
netdev_printk(KERN_DEBUG, ppp->dev,
" missed pkts %u..%u\n",
next prev parent reply other threads:[~2012-03-16 23:40 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-16 23:38 [ 00/41] 3.2.12-stable review Greg KH
2012-03-16 23:38 ` [ 01/41] ASoC: neo1973: fix neo1973 wm8753 initialization Greg KH
2012-03-16 23:38 ` [ 02/41] ALSA: hda/realtek - Apply the coef-setup only to ALC269VB Greg KH
2012-03-16 23:38 ` [ 03/41] aio: fix io_setup/io_destroy race Greg KH
2012-03-16 23:38 ` [ 04/41] aio: fix the "too late munmap()" race Greg KH
2012-03-16 23:38 ` [ 05/41] x86: Derandom delay_tsc for 64 bit Greg KH
2012-03-16 23:38 ` [ 06/41] PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled Greg KH
2012-03-31 3:23 ` Ken Moffat
2012-03-31 3:33 ` Jonathan Nieder
2012-03-31 18:20 ` Linus Torvalds
2012-03-31 18:32 ` Matthew Garrett
2012-04-19 23:21 ` Ken Moffat
2012-04-01 16:11 ` Ken Moffat
2012-04-01 16:59 ` Linus Torvalds
2012-04-01 17:10 ` Greg KH
2012-04-02 20:27 ` Ken Moffat
2012-03-16 23:38 ` [ 07/41] [media] omap3isp: ccdc: Fix crash in HS/VS interrupt handler Greg KH
2012-03-16 23:38 ` [ 08/41] rt2x00: fix random stalls Greg KH
2012-03-16 23:38 ` [ 09/41] perf/x86: Fix local vs remote memory events for NHM/WSM Greg KH
2012-03-16 23:38 ` [ 10/41] CIFS: Do not kmalloc under the flocks spinlock Greg KH
2012-03-17 2:37 ` Ben Hutchings
2012-03-17 6:14 ` Pavel Shilovsky
2012-03-17 7:32 ` Ben Hutchings
2012-03-17 7:52 ` Pavel Shilovsky
2012-03-19 15:50 ` Greg KH
2012-03-19 19:11 ` Pavel Shilovsky
2012-03-19 19:24 ` Greg KH
2012-03-23 17:52 ` Greg KH
2012-03-16 23:38 ` [ 11/41] vfs: fix return value from do_last() Greg KH
2012-03-16 23:38 ` [ 12/41] vfs: fix double put after complete_walk() Greg KH
2012-03-16 23:38 ` [ 13/41] acer-wmi: No wifi rfkill on Lenovo machines Greg KH
2012-03-16 23:38 ` [ 14/41] atl1c: dont use highprio tx queue Greg KH
2012-03-16 23:38 ` [ 15/41] neighbour: Fixed race condition at tbl->nht Greg KH
2012-03-16 23:38 ` [ 16/41] ipsec: be careful of non existing mac headers Greg KH
2012-03-16 23:38 ` Greg KH [this message]
2012-03-16 23:38 ` [ 18/41] sfc: Fix assignment of ip_summed for pre-allocated skbs Greg KH
2012-03-16 23:38 ` [ 19/41] tcp: fix false reordering signal in tcp_shifted_skb Greg KH
2012-03-16 23:38 ` [ 20/41] vmxnet3: Fix transport header size Greg KH
2012-03-16 23:38 ` [ 21/41] packetengines: fix config default Greg KH
2012-03-16 23:38 ` [ 22/41] r8169: corrupted IP fragments fix for large mtu Greg KH
2012-03-16 23:38 ` [ 23/41] tcp: dont fragment SACKed skbs in tcp_mark_head_lost() Greg KH
2012-03-16 23:38 ` [ 24/41] bridge: check return value of ipv6_dev_get_saddr() Greg KH
2012-03-16 23:38 ` [ 25/41] tcp: fix tcp_shift_skb_data() to not shift SACKed data below snd_una Greg KH
2012-03-16 23:38 ` [ 26/41] IPv6: Fix not join all-router mcast group when forwarding set Greg KH
2012-03-16 23:38 ` [ 27/41] usb: asix: Patch for Sitecom LN-031 Greg KH
2012-03-16 23:38 ` [ 28/41] regulator: Fix setting selector in tps6524x set_voltage function Greg KH
2012-03-16 23:38 ` [ 29/41] block: Fix NULL pointer dereference in sd_revalidate_disk Greg KH
2012-03-16 23:38 ` [ 30/41] block, sx8: fix pointer math issue getting fw version Greg KH
2012-03-16 23:38 ` [ 31/41] block: fix __blkdev_get and add_disk race condition Greg KH
2012-03-16 23:38 ` [ 32/41] Block: use a freezable workqueue for disk-event polling Greg KH
2012-03-16 23:38 ` [ 33/41] sparc32: Add -Av8 to assembler command line Greg KH
2012-03-16 23:38 ` [ 34/41] hwmon: (w83627ehf) Fix writing into fan_stop_time for NCT6775F/NCT6776F Greg KH
2012-03-16 23:38 ` [ 35/41] hwmon: (w83627ehf) Fix memory leak in probe function Greg KH
2012-03-16 23:38 ` [ 36/41] hwmon: (w83627ehf) Fix temp2 source for W83627UHG Greg KH
2012-03-16 23:38 ` [ 37/41] rapidio/tsi721: fix bug in register offset definitions Greg KH
2012-03-16 23:38 ` [ 38/41] i2c-algo-bit: Fix spurious SCL timeouts under heavy load Greg KH
2012-03-16 23:38 ` [ 39/41] iscsi-target: Fix reservation conflict -EBUSY response handling bug Greg KH
2012-03-16 23:38 ` [ 40/41] target: Fix compatible reservation handling (CRH=1) with legacy RESERVE/RELEASE Greg KH
2012-03-16 23:38 ` [ 41/41] hwmon: (zl6100) Enable interval between chip accesses for all chips Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120316233812.134810131@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=ben@netservers.co.uk \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).