* [PATCH] regulator: rc5t583: Simplify RC5T583_REG macro
@ 2012-04-06 0:01 Axel Lin
2012-04-06 5:33 ` Laxman Dewangan
2012-04-06 8:49 ` Mark Brown
0 siblings, 2 replies; 4+ messages in thread
From: Axel Lin @ 2012-04-06 0:01 UTC (permalink / raw)
To: linux-kernel; +Cc: Laxman Dewangan, Liam Girdwood, Mark Brown
Simplify RC5T583_REG macro by removing _vout_reg and _ds_reg parameters.
The naming for vout_reg and deepsleep_reg can be replaced by:
.vout_reg = RC5T583_REG_##_id##DAC,
.deepsleep_reg = RC5T583_REG_##_id##DAC_DS,
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/rc5t583-regulator.c | 50 ++++++++++++---------------------
1 files changed, 18 insertions(+), 32 deletions(-)
diff --git a/drivers/regulator/rc5t583-regulator.c b/drivers/regulator/rc5t583-regulator.c
index 578bd5d..fcb9cc7 100644
--- a/drivers/regulator/rc5t583-regulator.c
+++ b/drivers/regulator/rc5t583-regulator.c
@@ -196,16 +196,16 @@ static struct regulator_ops rc5t583_ops = {
.set_voltage_time_sel = rc5t583_set_voltage_time_sel,
};
-#define RC5T583_REG(_id, _en_reg, _en_bit, _disc_reg, _disc_bit, _vout_reg, \
- _vout_mask, _ds_reg, _min_mv, _max_mv, _step_uV, _enable_mv) \
+#define RC5T583_REG(_id, _en_reg, _en_bit, _disc_reg, _disc_bit, \
+ _vout_mask, _min_mv, _max_mv, _step_uV, _enable_mv) \
{ \
.reg_en_reg = RC5T583_REG_##_en_reg, \
.en_bit = _en_bit, \
.reg_disc_reg = RC5T583_REG_##_disc_reg, \
.disc_bit = _disc_bit, \
- .vout_reg = RC5T583_REG_##_vout_reg, \
+ .vout_reg = RC5T583_REG_##_id##DAC, \
.vout_mask = _vout_mask, \
- .deepsleep_reg = RC5T583_REG_##_ds_reg, \
+ .deepsleep_reg = RC5T583_REG_##_id##DAC_DS, \
.min_uV = _min_mv * 1000, \
.max_uV = _max_mv * 1000, \
.step_uV = _step_uV, \
@@ -223,34 +223,20 @@ static struct regulator_ops rc5t583_ops = {
}
static struct rc5t583_regulator_info rc5t583_reg_info[RC5T583_REGULATOR_MAX] = {
- RC5T583_REG(DC0, DC0CTL, 0, DC0CTL, 1, DC0DAC, 0x7F, DC0DAC_DS,
- 700, 1500, 12500, 4),
- RC5T583_REG(DC1, DC1CTL, 0, DC1CTL, 1, DC1DAC, 0x7F, DC1DAC_DS,
- 700, 1500, 12500, 14),
- RC5T583_REG(DC2, DC2CTL, 0, DC2CTL, 1, DC2DAC, 0x7F, DC2DAC_DS,
- 900, 2400, 12500, 14),
- RC5T583_REG(DC3, DC3CTL, 0, DC3CTL, 1, DC3DAC, 0x7F, DC3DAC_DS,
- 900, 2400, 12500, 14),
- RC5T583_REG(LDO0, LDOEN2, 0, LDODIS2, 0, LDO0DAC, 0x7F, LDO0DAC_DS,
- 900, 3400, 25000, 160),
- RC5T583_REG(LDO1, LDOEN2, 1, LDODIS2, 1, LDO1DAC, 0x7F, LDO1DAC_DS,
- 900, 3400, 25000, 160),
- RC5T583_REG(LDO2, LDOEN2, 2, LDODIS2, 2, LDO2DAC, 0x7F, LDO2DAC_DS,
- 900, 3400, 25000, 160),
- RC5T583_REG(LDO3, LDOEN2, 3, LDODIS2, 3, LDO3DAC, 0x7F, LDO3DAC_DS,
- 900, 3400, 25000, 160),
- RC5T583_REG(LDO4, LDOEN2, 4, LDODIS2, 4, LDO4DAC, 0x3F, LDO4DAC_DS,
- 750, 1500, 12500, 133),
- RC5T583_REG(LDO5, LDOEN2, 5, LDODIS2, 5, LDO5DAC, 0x7F, LDO5DAC_DS,
- 900, 3400, 25000, 267),
- RC5T583_REG(LDO6, LDOEN2, 6, LDODIS2, 6, LDO6DAC, 0x7F, LDO6DAC_DS,
- 900, 3400, 25000, 133),
- RC5T583_REG(LDO7, LDOEN2, 7, LDODIS2, 7, LDO7DAC, 0x7F, LDO7DAC_DS,
- 900, 3400, 25000, 233),
- RC5T583_REG(LDO8, LDOEN1, 0, LDODIS1, 0, LDO8DAC, 0x7F, LDO8DAC_DS,
- 900, 3400, 25000, 233),
- RC5T583_REG(LDO9, LDOEN1, 1, LDODIS1, 1, LDO9DAC, 0x7F, LDO9DAC_DS,
- 900, 3400, 25000, 133),
+ RC5T583_REG(DC0, DC0CTL, 0, DC0CTL, 1, 0x7F, 700, 1500, 12500, 4),
+ RC5T583_REG(DC1, DC1CTL, 0, DC1CTL, 1, 0x7F, 700, 1500, 12500, 14),
+ RC5T583_REG(DC2, DC2CTL, 0, DC2CTL, 1, 0x7F, 900, 2400, 12500, 14),
+ RC5T583_REG(DC3, DC3CTL, 0, DC3CTL, 1, 0x7F, 900, 2400, 12500, 14),
+ RC5T583_REG(LDO0, LDOEN2, 0, LDODIS2, 0, 0x7F, 900, 3400, 25000, 160),
+ RC5T583_REG(LDO1, LDOEN2, 1, LDODIS2, 1, 0x7F, 900, 3400, 25000, 160),
+ RC5T583_REG(LDO2, LDOEN2, 2, LDODIS2, 2, 0x7F, 900, 3400, 25000, 160),
+ RC5T583_REG(LDO3, LDOEN2, 3, LDODIS2, 3, 0x7F, 900, 3400, 25000, 160),
+ RC5T583_REG(LDO4, LDOEN2, 4, LDODIS2, 4, 0x3F, 750, 1500, 12500, 133),
+ RC5T583_REG(LDO5, LDOEN2, 5, LDODIS2, 5, 0x7F, 900, 3400, 25000, 267),
+ RC5T583_REG(LDO6, LDOEN2, 6, LDODIS2, 6, 0x7F, 900, 3400, 25000, 133),
+ RC5T583_REG(LDO7, LDOEN2, 7, LDODIS2, 7, 0x7F, 900, 3400, 25000, 233),
+ RC5T583_REG(LDO8, LDOEN1, 0, LDODIS1, 0, 0x7F, 900, 3400, 25000, 233),
+ RC5T583_REG(LDO9, LDOEN1, 1, LDODIS1, 1, 0x7F, 900, 3400, 25000, 133),
};
static int __devinit rc5t583_regulator_probe(struct platform_device *pdev)
--
1.7.5.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] regulator: rc5t583: Simplify RC5T583_REG macro
2012-04-06 0:01 [PATCH] regulator: rc5t583: Simplify RC5T583_REG macro Axel Lin
@ 2012-04-06 5:33 ` Laxman Dewangan
2012-04-06 8:51 ` Mark Brown
2012-04-06 8:49 ` Mark Brown
1 sibling, 1 reply; 4+ messages in thread
From: Laxman Dewangan @ 2012-04-06 5:33 UTC (permalink / raw)
To: Axel Lin; +Cc: linux-kernel@vger.kernel.org, Liam Girdwood, Mark Brown
On Friday 06 April 2012 05:31 AM, Axel Lin wrote:
> Simplify RC5T583_REG macro by removing _vout_reg and _ds_reg parameters.
>
> The naming for vout_reg and deepsleep_reg can be replaced by:
> .vout_reg = RC5T583_REG_##_id##DAC,
> .deepsleep_reg = RC5T583_REG_##_id##DAC_DS,
>
> Signed-off-by: Axel Lin<axel.lin@gmail.com>
> ---
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
I thought of doing this on my first patch and then thought that table
should have all configuration picture rather than deriving from few
parameters.
If this is a good way then I will take care for my next PMIC driver
development.
Thanks,
Laxman
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] regulator: rc5t583: Simplify RC5T583_REG macro
2012-04-06 0:01 [PATCH] regulator: rc5t583: Simplify RC5T583_REG macro Axel Lin
2012-04-06 5:33 ` Laxman Dewangan
@ 2012-04-06 8:49 ` Mark Brown
1 sibling, 0 replies; 4+ messages in thread
From: Mark Brown @ 2012-04-06 8:49 UTC (permalink / raw)
To: Axel Lin; +Cc: linux-kernel, Laxman Dewangan, Liam Girdwood
[-- Attachment #1: Type: text/plain, Size: 317 bytes --]
On Fri, Apr 06, 2012 at 08:01:36AM +0800, Axel Lin wrote:
> Simplify RC5T583_REG macro by removing _vout_reg and _ds_reg parameters.
>
> The naming for vout_reg and deepsleep_reg can be replaced by:
> .vout_reg = RC5T583_REG_##_id##DAC,
> .deepsleep_reg = RC5T583_REG_##_id##DAC_DS,
Applied, thanks.
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] regulator: rc5t583: Simplify RC5T583_REG macro
2012-04-06 5:33 ` Laxman Dewangan
@ 2012-04-06 8:51 ` Mark Brown
0 siblings, 0 replies; 4+ messages in thread
From: Mark Brown @ 2012-04-06 8:51 UTC (permalink / raw)
To: Laxman Dewangan; +Cc: Axel Lin, linux-kernel@vger.kernel.org, Liam Girdwood
[-- Attachment #1: Type: text/plain, Size: 554 bytes --]
On Fri, Apr 06, 2012 at 11:03:36AM +0530, Laxman Dewangan wrote:
> I thought of doing this on my first patch and then thought that
> table should have all configuration picture rather than deriving
> from few parameters.
> If this is a good way then I will take care for my next PMIC driver
> development.
This way is good - if you look at for example the wm831x driver where
there's a bunch of regulators with the same register layout replicated
in different places in the chip all it does is specify the base for the
block when defining a regulator.
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-04-06 8:51 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-04-06 0:01 [PATCH] regulator: rc5t583: Simplify RC5T583_REG macro Axel Lin
2012-04-06 5:33 ` Laxman Dewangan
2012-04-06 8:51 ` Mark Brown
2012-04-06 8:49 ` Mark Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox