From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758352Ab2DXWxg (ORCPT ); Tue, 24 Apr 2012 18:53:36 -0400 Received: from mail-pb0-f46.google.com ([209.85.160.46]:49279 "EHLO mail-pb0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932576Ab2DXWfz (ORCPT ); Tue, 24 Apr 2012 18:35:55 -0400 Message-Id: <20120424223245.328130919@linuxfoundation.org> User-Agent: quilt/0.60-19.1 Date: Tue, 24 Apr 2012 15:33:20 -0700 From: Greg KH To: linux-kernel@vger.kernel.org, stable@vger.kernel.org Cc: torvalds@linux-foundation.org, akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk, Alan Stern , Peter Chen Subject: [ 39/62] EHCI: fix criterion for resuming the root hub In-Reply-To: <20120424223305.GA7748@kroah.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org 3.3-stable review patch. If anyone has any objections, please let me know. ------------------ From: Alan Stern commit dc75ce9d929aabeb0843a6b1a4ab320e58ba1597 upstream. This patch (as1542) changes the criterion ehci-hcd uses to tell when it needs to resume the controller's root hub. A resume is needed when a port status change is detected, obviously, but only if the root hub is currently suspended. Right now the driver tests whether the root hub is running, and that is not the correct test. In particular, if the controller has died then the root hub should not be restarted. In addition, some buggy hardware occasionally requires the root hub to be running and sending out SOF packets even while it is nominally supposed to be suspended. In the end, the test needs to be changed. Rather than checking whether the root hub is currently running, the driver will now check whether the root hub is currently suspended. This will yield the correct behavior in all cases. Signed-off-by: Alan Stern CC: Peter Chen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -909,7 +909,7 @@ static irqreturn_t ehci_irq (struct usb_ pcd_status = status; /* resume root hub? */ - if (!(cmd & CMD_RUN)) + if (ehci->rh_state == EHCI_RH_SUSPENDED) usb_hcd_resume_root_hub(hcd); /* get per-port change detect bits */