From: Greg KH <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: torvalds@linux-foundation.org, akpm@linux-foundation.org,
alan@lxorguk.ukuu.org.uk,
Stefano Stabellini <stefano.stabellini@eu.citrix.com>,
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Subject: [ 06/42] xen/gntdev: do not set VM_PFNMAP
Date: Tue, 24 Apr 2012 15:32:59 -0700 [thread overview]
Message-ID: <20120424223253.987401789@linuxfoundation.org> (raw)
In-Reply-To: <20120424223311.GA8456@kroah.com>
3.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
commit e8e937be971d706061dc56220ff3605ab77622a7 upstream.
Since we are using the m2p_override we do have struct pages
corresponding to the user vma mmap'ed by gntdev.
Removing the VM_PFNMAP flag makes get_user_pages work on that vma.
An example test case would be using a Xen userspace block backend
(QDISK) on a file on NFS using O_DIRECT.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/xen/gntdev.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/xen/gntdev.c
+++ b/drivers/xen/gntdev.c
@@ -664,7 +664,7 @@ static int gntdev_mmap(struct file *flip
vma->vm_flags |= VM_RESERVED|VM_DONTEXPAND;
if (use_ptemod)
- vma->vm_flags |= VM_DONTCOPY|VM_PFNMAP;
+ vma->vm_flags |= VM_DONTCOPY;
vma->vm_private_data = map;
next prev parent reply other threads:[~2012-04-24 22:37 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-24 22:33 [ 00/42] 3.0.30-stable review Greg KH
2012-04-24 22:32 ` [ 01/42] Perf: fix build breakage Greg KH
2012-04-24 22:32 ` [ 02/42] crypto: sha512 - Fix byte counter overflow in SHA-512 Greg KH
2012-04-24 22:32 ` [ 03/42] hwmon: fam15h_power: fix bogus values with current BIOSes Greg KH
2012-04-25 19:46 ` Ben Hutchings
2012-04-26 21:16 ` Greg KH
2012-04-24 22:32 ` [ 04/42] ALSA: hda/conexant - Dont set HP pin-control bit unconditionally Greg KH
2012-04-24 22:32 ` [ 05/42] ARM: clps711x: serial driver hungs are a result of call disable_irq within ISR Greg KH
2012-04-24 22:32 ` Greg KH [this message]
2012-04-24 22:33 ` [ 07/42] xen/xenbus: Add quirk to deal with misconfigured backends Greg KH
2012-04-24 22:33 ` [ 08/42] USB: yurex: Remove allocation of coherent buffer for setup-packet buffer Greg KH
2012-04-24 22:33 ` [ 09/42] USB: yurex: Fix missing URB_NO_TRANSFER_DMA_MAP flag in urb Greg KH
2012-04-24 22:33 ` [ 10/42] uwb: fix use of del_timer_sync() in interrupt Greg KH
2012-04-24 22:33 ` [ 11/42] uwb: fix error handling Greg KH
2012-04-24 22:33 ` [ 12/42] davinci_mdio: Fix MDIO timeout check Greg KH
2012-04-24 22:33 ` [ 13/42] media: rc-core: set mode for winbond-cir Greg KH
2012-04-24 22:33 ` [ 14/42] cfg80211: fix interface combinations check Greg KH
2012-04-24 22:33 ` [ 15/42] mm: fix s390 BUG by __set_page_dirty_no_writeback on swap Greg KH
2012-04-24 22:33 ` [ 16/42] jbd2: use GFP_NOFS for blkdev_issue_flush Greg KH
2012-04-24 22:33 ` [ 17/42] USB: serial: cp210x: Fixed usb_control_msg timeout values Greg KH
2012-04-24 22:33 ` [ 18/42] pch_uart: Fix dma channel unallocated issue Greg KH
2012-04-24 22:33 ` [ 19/42] drivers/tty/amiserial.c: add missing tty_unlock Greg KH
2012-04-24 22:33 ` [ 20/42] USB: sierra: avoid QMI/wwan interface on MC77xx Greg KH
2012-04-24 22:33 ` [ 21/42] EHCI: always clear the STS_FLR status bit Greg KH
2012-04-24 22:33 ` [ 22/42] USB: fix deadlock in bConfigurationValue attribute method Greg KH
2012-04-24 22:33 ` [ 23/42] usb: gadget: eliminate NULL pointer dereference (bugfix) Greg KH
2012-04-24 22:33 ` [ 24/42] usb: musb: omap: fix crash when musb glue (omap) gets initialized Greg KH
2012-04-24 22:33 ` [ 25/42] usb: musb: omap: fix the error check for pm_runtime_get_sync Greg KH
2012-04-24 22:33 ` [ 26/42] PCI: Add quirk for still enabled interrupts on Intel Sandy Bridge GPUs Greg KH
2012-04-24 22:33 ` [ 27/42] ext4: fix endianness breakage in ext4_split_extent_at() Greg KH
2012-04-24 22:33 ` [ 28/42] Bluetooth: Add support for Atheros [04ca:3005] Greg KH
2012-04-24 22:33 ` [ 29/42] Dont limit non-nested epoll paths Greg KH
2012-04-24 22:33 ` [ 30/42] spi: Fix device unregistration when unregistering the bus master Greg KH
2012-04-24 22:33 ` [ 31/42] rt2x00: Properly identify rt2800usb devices Greg KH
2012-04-24 22:33 ` [ 32/42] rt2800usb: Add new device ID for Belkin Greg KH
2012-04-24 22:33 ` [ 33/42] rt2x00: Add USB device ID of Buffalo WLI-UC-GNHP Greg KH
2012-04-24 22:33 ` [ 34/42] rt2800: Add support for the Fujitsu Stylistic Q550 Greg KH
2012-04-24 22:33 ` [ 35/42] rt2x00: Identify rt2800usb chipsets Greg KH
2012-04-24 22:33 ` [ 36/42] nfsd: fix compose_entry_fh() failure exits Greg KH
2012-04-24 22:33 ` [ 37/42] btrfs: btrfs_root_readonly() broken on big-endian Greg KH
2012-04-24 22:33 ` [ 38/42] ocfs2: ->l_next_free_req breakage " Greg KH
2012-04-24 22:33 ` [ 39/42] ocfs: ->rl_used " Greg KH
2012-04-24 22:33 ` [ 40/42] ocfs2: ->rl_count endianness breakage Greg KH
2012-04-24 22:33 ` [ 41/42] ocfs2: ->e_leaf_clusters " Greg KH
2012-04-24 22:33 ` [ 42/42] lockd: fix the endianness bug Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120424223253.987401789@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=konrad.wilk@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=stefano.stabellini@eu.citrix.com \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox