From: Gustavo Padovan <gustavo@padovan.org>
To: "Michael Grützner" <mgruetzn@gmx.de>
Cc: marcel@holtmann.org, johan.hedberg@gmail.com,
linux-bluetooth@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/1] bluetooth: Add support for Foxconn/Hon Hai AR5BBU22 0489:E03C
Date: Wed, 2 May 2012 18:28:55 -0300 [thread overview]
Message-ID: <20120502212855.GC16030@joana> (raw)
In-Reply-To: <5301735.uaK8kx1qmQ@dagobah>
Hi Michael,
* Michael Grützner <mgruetzn@gmx.de> [2012-05-02 22:33:40 +0200]:
> From: Michael Gruetzner <mgruetzn@gmx.de>
>
> Add Foxconn/Hon Hai AR5BBU22 Bluetooth Module( 0x489:0xE03C) to
> the blacklist of btusb module and add it to the ath3k module to properly
> load the firmware in Kernel 3.3.4
> The device is integrated in e.g. some Acer Aspire 7750G.
>
> Output from /sys/kernel/debug/usb/devices:
>
> T: Bus=01 Lev=02 Prnt=02 Port=05 Cnt=02 Dev#= 6 Spd=12 MxCh= 0
> D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0489 ProdID=e03c Rev= 0.02
> S: Manufacturer=Atheros Communications
> S: Product=Bluetooth USB Host Controller
> S: SerialNumber=Alaska Day 2006
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>
> Signed-off-by: Michael Gruetzner <mgruetzn@gmx.de>
> ---
> drivers/bluetooth/ath3k.c | 6 ++++++
> drivers/bluetooth/btusb.c | 3 +++
> 2 files changed, 9 insertions(+)
Patch has been applied to both bluetooth and bluetooth-next trees.
Thanks.
Gustavo
next prev parent reply other threads:[~2012-05-02 21:29 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-30 23:43 [PATCH 1/1] bluetooth: Add support for Foxconn/Hon Hai AR5BBU22 0489:E03C Michael Grützner
2012-05-02 15:08 ` Gustavo Padovan
2012-05-02 20:33 ` Michael Grützner
2012-05-02 21:28 ` Gustavo Padovan [this message]
2012-05-29 12:27 ` [3.0.y, 3.2.y, 3.4.y] " Jonathan Nieder
2012-05-30 1:26 ` Michael Grützner
2012-06-01 9:18 ` Greg KH
2012-06-06 14:07 ` Ben Hutchings
-- strict thread matches above, loose matches on Subject: below --
2012-04-30 23:37 Michael Grützner
2012-04-30 1:41 Michael Grützner
2012-04-30 9:33 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120502212855.GC16030@joana \
--to=gustavo@padovan.org \
--cc=johan.hedberg@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=mgruetzn@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox