From: Sam Ravnborg <sam@ravnborg.org>
To: Linus Torvalds <torvalds@linux-foundation.org>,
netdev <netdev@vger.kernel.org>,
"David S. Miller" <davem@davemloft.net>
Cc: David Miller <davem@davemloft.net>,
akpm@linux-foundation.org, sparclinux@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] net: drop NET dependency from HAVE_BPF_JIT
Date: Mon, 21 May 2012 20:52:02 +0200 [thread overview]
Message-ID: <20120521185202.GA6486@merkur.ravnborg.org> (raw)
In-Reply-To: <CA+55aFy4He9X6wQjATaJukzH1FkyhGqnmC4kb+azKuMmjPGbmg@mail.gmail.com>
>From 4976b8fc9fd9f876634d6d73e5b808c762e1352a Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Mon, 21 May 2012 20:45:37 +0200
Subject: [PATCH] net: drop NET dependency from HAVE_BPF_JIT
There is no point having the NET dependency on the select target,
as it forces all users to depend on NET to tell they support BPF_JIT.
Move the config option to the bottom of the file - this
could be a nice place also for future "selectable" config symbols.
Fix up all users to drop the dependency on NET now that
it is not required to supress warnings for non-NET builds.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
Did a few "make ARCH=xxx allnoconfig" and no warning were triggered.
Sam
arch/arm/Kconfig | 2 +-
arch/powerpc/Kconfig | 2 +-
arch/sparc/Kconfig | 2 +-
arch/x86/Kconfig | 2 +-
net/Kconfig | 7 ++++---
5 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 36586db..e19ed3f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -33,7 +33,7 @@ config ARM
select GENERIC_IRQ_SHOW
select CPU_PM if (SUSPEND || CPU_IDLE)
select GENERIC_PCI_IOMAP
- select HAVE_BPF_JIT if NET
+ select HAVE_BPF_JIT
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index feab3ba..73ec039 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -141,7 +141,7 @@ config PPC
select IRQ_FORCED_THREADING
select HAVE_RCU_TABLE_FREE if SMP
select HAVE_SYSCALL_TRACEPOINTS
- select HAVE_BPF_JIT if (PPC64 && NET)
+ select HAVE_BPF_JIT if PPC64
select HAVE_ARCH_JUMP_LABEL
select ARCH_HAVE_NMI_SAFE_CMPXCHG
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 6c49ed2..d176c03 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -30,7 +30,7 @@ config SPARC
select USE_GENERIC_SMP_HELPERS if SMP
select GENERIC_PCI_IOMAP
select HAVE_NMI_WATCHDOG if SPARC64
- select HAVE_BPF_JIT if NET
+ select HAVE_BPF_JIT
config SPARC32
def_bool !64BIT
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index c9866b0..25f87bc 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -77,7 +77,7 @@ config X86
select GENERIC_CLOCKEVENTS_MIN_ADJUST
select IRQ_FORCED_THREADING
select USE_GENERIC_SMP_HELPERS if SMP
- select HAVE_BPF_JIT if (X86_64 && NET)
+ select HAVE_BPF_JIT if X86_64
select CLKEVT_I8253
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select GENERIC_IOMAP
diff --git a/net/Kconfig b/net/Kconfig
index 1e47bd0..245831b 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -246,9 +246,6 @@ config BQL
select DQL
default y
-config HAVE_BPF_JIT
- bool
-
config BPF_JIT
bool "enable BPF Just In Time compiler"
depends on HAVE_BPF_JIT
@@ -340,3 +337,7 @@ source "net/nfc/Kconfig"
endif # if NET
+
+# Used by archs to tell that they support BPF_JIT
+config HAVE_BPF_JIT
+ bool
--
1.6.0.6
next prev parent reply other threads:[~2012-05-21 18:52 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-21 9:03 [GIT] Sparc David Miller
2012-05-21 17:37 ` Linus Torvalds
2012-05-21 18:24 ` Sam Ravnborg
2012-05-21 18:28 ` Linus Torvalds
2012-05-21 18:33 ` Linus Torvalds
2012-05-21 18:52 ` Sam Ravnborg [this message]
2012-05-21 18:54 ` [PATCH] net: drop NET dependency from HAVE_BPF_JIT Linus Torvalds
2012-05-21 19:48 ` David Miller
2012-05-21 18:38 ` [GIT] Sparc Sam Ravnborg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120521185202.GA6486@merkur.ravnborg.org \
--to=sam@ravnborg.org \
--cc=akpm@linux-foundation.org \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=sparclinux@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).