From: Anton Vorontsov <anton.vorontsov@linaro.org>
To: Lee Jones <lee.jones@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>,
linux-kernel@vger.kernel.org,
Karl Komierowski <karl.komierowski@stericsson.com>,
Arun Murthy <arun.murthy@stericsson.com>
Subject: Re: [PATCH 1/3] power/ab8500_charger: harden platform data check
Date: Tue, 22 May 2012 04:56:38 -0700 [thread overview]
Message-ID: <20120522115638.GA19506@lizard> (raw)
In-Reply-To: <4FBB79D5.7030108@linaro.org>
Hi Lee,
On Tue, May 22, 2012 at 12:34:45PM +0100, Lee Jones wrote:
> Hi Anton,
>
> I see that this didn't make it into any of the v3.4-rc:s, hence v3.4
> was released broken. Do you know when they're likely to make it into
> Mainline?
You probably should have told me that you needed these patches in
v3.4, because neither Linus' nor yours patch description did not
tell that these were urgent fixes (and not some stuff you'd just
like to have for the future).
But now I see that ab8500 mfd core driver in v3.4 seem to register
the charger and stuff w/o platform data already, so we'd need
at least 'Harden platform data check' patches back-ported into
-stable.
Now once Linus Torvalds pull battery tree, I'll ask Greg KH to
cherry-pick the patches into -stable.
Thanks!
>
> Kind regards,
> Lee
>
> >- - - -
> >commit 2aac3de19b72608f474c90034185c2be4908728f
> >Author: Lee Jones<lee.jones@linaro.org>
> >Date: Sat May 5 04:38:19 2012 -0700
> >
> > ab8500: Clean up probe routines
> >
> > These patches clean up some ugliness and brings the variable
> > initialisation formatting more into line with other drivers.
> >
> > Signed-off-by: Lee Jones<lee.jones@linaro.org>
> > Signed-off-by: Anton Vorontsov<anton.vorontsov@linaro.org>
> >
> >diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c
> >index e266f03..bba3cca 100644
> >--- a/drivers/power/ab8500_btemp.c
> >+++ b/drivers/power/ab8500_btemp.c
> >@@ -964,10 +964,15 @@ static int __devinit ab8500_btemp_probe(struct platform_device *pdev)
> > {
> > int irq, i, ret = 0;
> > u8 val;
> >- struct abx500_bm_plat_data *plat_data;
> >+ struct abx500_bm_plat_data *plat_data = pdev->dev.platform_data;
> >+ struct ab8500_btemp *di;
> >+
> >+ if (!plat_data) {
> >+ dev_err(&pdev->dev, "No platform data\n");
> >+ return -EINVAL;
> >+ }
> >
> >- struct ab8500_btemp *di =
> >- kzalloc(sizeof(struct ab8500_btemp), GFP_KERNEL);
> >+ di = kzalloc(sizeof(*di), GFP_KERNEL);
> > if (!di)
> > return -ENOMEM;
> >
> >@@ -977,13 +982,12 @@ static int __devinit ab8500_btemp_probe(struct platform_device *pdev)
> > di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
> >
> > /* get btemp specific platform data */
> >- plat_data = pdev->dev.platform_data;
> >- if (!plat_data || !plat_data->btemp) {
> >+ di->pdata = plat_data->btemp;
> >+ if (!di->pdata) {
> > dev_err(di->dev, "no btemp platform data supplied\n");
> > ret = -EINVAL;
> > goto free_device_info;
> > }
> >- di->pdata = plat_data->btemp;
> >
> > /* get battery specific platform data */
> > di->bat = plat_data->battery;
> >diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c
> >index 79dc584..d2303d0 100644
> >--- a/drivers/power/ab8500_charger.c
> >+++ b/drivers/power/ab8500_charger.c
> >@@ -2534,10 +2534,15 @@ static int __devexit ab8500_charger_remove(struct platform_device *pdev)
> > static int __devinit ab8500_charger_probe(struct platform_device *pdev)
> > {
> > int irq, i, charger_status, ret = 0;
> >- struct abx500_bm_plat_data *plat_data;
> >+ struct abx500_bm_plat_data *plat_data = pdev->dev.platform_data;
> >+ struct ab8500_charger *di;
> >
> >- struct ab8500_charger *di =
> >- kzalloc(sizeof(struct ab8500_charger), GFP_KERNEL);
> >+ if (!plat_data) {
> >+ dev_err(&pdev->dev, "No platform data\n");
> >+ return -EINVAL;
> >+ }
> >+
> >+ di = kzalloc(sizeof(*di), GFP_KERNEL);
> > if (!di)
> > return -ENOMEM;
> >
> >@@ -2550,13 +2555,12 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev)
> > spin_lock_init(&di->usb_state.usb_lock);
> >
> > /* get charger specific platform data */
> >- plat_data = pdev->dev.platform_data;
> >- if (!plat_data || !plat_data->charger) {
> >+ di->pdata = plat_data->charger;
> >+ if (!di->pdata) {
> > dev_err(di->dev, "no charger platform data supplied\n");
> > ret = -EINVAL;
> > goto free_device_info;
> > }
> >- di->pdata = plat_data->charger;
> >
> > /* get battery specific platform data */
> > di->bat = plat_data->battery;
> >diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c
> >index 0ebea39..bf02225 100644
> >--- a/drivers/power/ab8500_fg.c
> >+++ b/drivers/power/ab8500_fg.c
> >@@ -2446,10 +2446,15 @@ static int __devinit ab8500_fg_probe(struct platform_device *pdev)
> > {
> > int i, irq;
> > int ret = 0;
> >- struct abx500_bm_plat_data *plat_data;
> >+ struct abx500_bm_plat_data *plat_data = pdev->dev.platform_data;
> >+ struct ab8500_fg *di;
> >+
> >+ if (!plat_data) {
> >+ dev_err(&pdev->dev, "No platform data\n");
> >+ return -EINVAL;
> >+ }
> >
> >- struct ab8500_fg *di =
> >- kzalloc(sizeof(struct ab8500_fg), GFP_KERNEL);
> >+ di = kzalloc(sizeof(*di), GFP_KERNEL);
> > if (!di)
> > return -ENOMEM;
> >
> >@@ -2461,13 +2466,12 @@ static int __devinit ab8500_fg_probe(struct platform_device *pdev)
> > di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
> >
> > /* get fg specific platform data */
> >- plat_data = pdev->dev.platform_data;
> >- if (!plat_data || !plat_data->fg) {
> >+ di->pdata = plat_data->fg;
> >+ if (!di->pdata) {
> > dev_err(di->dev, "no fg platform data supplied\n");
> > ret = -EINVAL;
> > goto free_device_info;
> > }
> >- di->pdata = plat_data->fg;
> >
> > /* get battery specific platform data */
> > di->bat = plat_data->battery;
>
>
> --
> Lee Jones
> Linaro ST-Ericsson Landing Team Lead
> M: +44 77 88 633 515
> Linaro.org │ Open source software for ARM SoCs
> Follow Linaro: Facebook | Twitter | Blog
--
Anton Vorontsov
Email: cbouatmailru@gmail.com
next prev parent reply other threads:[~2012-05-22 11:58 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-13 8:15 [PATCH 1/3] power/ab8500_charger: harden platform data check Linus Walleij
2012-04-13 8:42 ` Arun MURTHY
2012-05-05 12:06 ` Anton Vorontsov
2012-04-28 12:59 ` Linus Walleij
2012-04-28 16:38 ` Lee Jones
2012-05-05 12:08 ` Anton Vorontsov
[not found] ` <CAF2Aj3hy3KOsH3aiZ0UpuERSwOoqFdYQ4su-hEVcU-qp8r5d9A@mail.gmail.com>
2012-05-05 21:55 ` Anton Vorontsov
2012-05-06 7:25 ` Lee Jones
2012-05-22 11:34 ` Lee Jones
2012-05-22 11:56 ` Anton Vorontsov [this message]
2012-05-22 12:03 ` Lee Jones
2012-05-22 13:22 ` Anton Vorontsov
2012-05-23 19:00 ` Linus Walleij
2012-05-02 11:31 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120522115638.GA19506@lizard \
--to=anton.vorontsov@linaro.org \
--cc=arun.murthy@stericsson.com \
--cc=karl.komierowski@stericsson.com \
--cc=lee.jones@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox