From: Wolfram Sang <w.sang@pengutronix.de>
To: sonic.zhang@analog.com
Cc: Ben Dooks <ben-linux@fluff.org>,
linux-i2c@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>,
uclinux-dist-devel@blackfin.uclinux.org
Subject: Re: [PATCH 7/8] i2c: i2c-bfin-twi: Move TWI peripheral pin request array to platform data.
Date: Mon, 11 Jun 2012 18:35:11 +0200 [thread overview]
Message-ID: <20120611163511.GG3887@pengutronix.de> (raw)
In-Reply-To: <1337152826-9850-7-git-send-email-sonic.zhang@analog.com>
[-- Attachment #1: Type: text/plain, Size: 2374 bytes --]
On Wed, May 16, 2012 at 03:20:25PM +0800, sonic.zhang@analog.com wrote:
> From: Sonic Zhang <sonic.zhang@analog.com>
>
> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Again, please state the dependency.
> ---
> drivers/i2c/busses/i2c-bfin-twi.c | 12 ++++--------
> 1 files changed, 4 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
> index d7e8fba..b2ca317 100644
> --- a/drivers/i2c/busses/i2c-bfin-twi.c
> +++ b/drivers/i2c/busses/i2c-bfin-twi.c
> @@ -78,11 +78,6 @@ DEFINE_TWI_REG(XMT_DATA16, 0x84)
> DEFINE_TWI_REG(RCV_DATA8, 0x88)
> DEFINE_TWI_REG(RCV_DATA16, 0x8C)
>
> -static const u16 pin_req[2][3] = {
> - {P_TWI0_SCL, P_TWI0_SDA, 0},
> - {P_TWI1_SCL, P_TWI1_SDA, 0},
> -};
> -
> static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
> unsigned short twi_int_status)
> {
> @@ -719,7 +714,8 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
> p_adap->timeout = 5 * HZ;
> p_adap->retries = 3;
>
> - rc = peripheral_request_list(pin_req[pdev->id], "i2c-bfin-twi");
> + rc = peripheral_request_list((unsigned short *)pdev->dev.platform_data,
> + "i2c-bfin-twi");
> if (rc) {
> dev_err(&pdev->dev, "Can't setup pin mux!\n");
> goto out_error_pin_mux;
> @@ -766,7 +762,7 @@ out_error_add_adapter:
> free_irq(iface->irq, iface);
> out_error_req_irq:
> out_error_no_irq:
> - peripheral_free_list(pin_req[pdev->id]);
> + peripheral_free_list((unsigned short *)pdev->dev.platform_data);
> out_error_pin_mux:
> iounmap(iface->regs_base);
> out_error_ioremap:
> @@ -784,7 +780,7 @@ static int i2c_bfin_twi_remove(struct platform_device *pdev)
>
> i2c_del_adapter(&(iface->adap));
> free_irq(iface->irq, iface);
> - peripheral_free_list(pin_req[pdev->id]);
> + peripheral_free_list((unsigned short *)pdev->dev.platform_data);
> iounmap(iface->regs_base);
> kfree(iface);
>
> --
> 1.7.0.4
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Pengutronix e.K. | Wolfram Sang |
Industrial Linux Solutions | http://www.pengutronix.de/ |
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
next prev parent reply other threads:[~2012-06-11 16:35 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-16 7:20 [PATCH 1/8] i2c: i2c-bfin-twi: Illegal i2c bus lock upon certain transfer scenarios sonic.zhang
2012-05-16 7:20 ` [PATCH 2/8] i2c: i2c-bfin-twi: Stop receiving operation immediately in last rx interrupt sonic.zhang
2012-05-24 9:18 ` Sonic Zhang
2012-06-11 16:28 ` Wolfram Sang
2012-05-16 7:20 ` [PATCH 3/8] i2c: i2c-bfin-twi: Break dead waiting loop if i2c device misbehaves sonic.zhang
2012-05-17 5:20 ` Shubhrajyoti Datta
2012-05-17 5:23 ` Mike Frysinger
2012-05-17 10:51 ` Shubhrajyoti Datta
2012-06-11 16:30 ` Wolfram Sang
2012-06-13 7:47 ` Zhang, Sonic
2012-05-16 7:20 ` [PATCH 4/8] i2c: i2c-bfin-twi: Tighten condition when failing I2C transfer if MEN bit is reset unexpectedly sonic.zhang
2012-05-17 11:30 ` Shubhrajyoti Datta
2012-05-18 2:41 ` Zhang, Sonic
2012-05-18 6:22 ` Shubhrajyoti Datta
2012-06-11 16:33 ` Wolfram Sang
2012-05-16 7:20 ` [PATCH 5/8] i2c:i2c-bfin-twi: TWI fails to restart next transfer in high system load sonic.zhang
2012-05-16 7:20 ` [PATCH 6/8] i2c:i2c-bfin-twi: include twi head file sonic.zhang
2012-05-24 9:18 ` Sonic Zhang
2012-06-11 16:34 ` Wolfram Sang
2012-05-16 7:20 ` [PATCH 7/8] i2c: i2c-bfin-twi: Move TWI peripheral pin request array to platform data sonic.zhang
2012-06-11 16:35 ` Wolfram Sang [this message]
2012-05-16 7:20 ` [PATCH 8/8] i2c: i2c-bfin-twi: Move blackfin TWI register access Macro to head file sonic.zhang
2012-05-24 9:19 ` Sonic Zhang
2012-05-25 9:48 ` Shubhrajyoti Datta
2012-05-25 9:54 ` Zhang, Sonic
2012-05-25 10:10 ` Shubhrajyoti Datta
2012-05-25 10:12 ` Zhang, Sonic
2012-05-25 10:16 ` Shubhrajyoti Datta
2012-06-11 16:36 ` Wolfram Sang
2012-05-24 9:17 ` [PATCH 1/8] i2c: i2c-bfin-twi: Illegal i2c bus lock upon certain transfer scenarios Sonic Zhang
2012-06-11 16:24 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120611163511.GG3887@pengutronix.de \
--to=w.sang@pengutronix.de \
--cc=ben-linux@fluff.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sonic.zhang@analog.com \
--cc=uclinux-dist-devel@blackfin.uclinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox