From: Daniel Vetter <daniel@ffwll.ch>
To: Daniel Vetter <daniel.vetter@ffwll.ch>,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: Re: i915: lvds panel always blank when booted with lid closed
Date: Wed, 13 Jun 2012 18:25:44 +0200 [thread overview]
Message-ID: <20120613162544.GJ4829@phenom.ffwll.local> (raw)
In-Reply-To: <20120613143600.GD3490@thinkpad-t410>
On Wed, Jun 13, 2012 at 09:36:00AM -0500, Seth Forshee wrote:
> When I boot my Thinkpad T410 in a docking station with the lid closed,
> the lvds panel remains blank even when this output is active. This
> happens up to and including 3.5-rc2.
>
> I've determined that this happens because lvds isn't being initialized
> by the bios when I boot this way, and booting with lvds_channel_mode=2
> fixes the issue. I see that there's logic in is_dual_link_lvds()
> intended to detect this situation, but it's failing because the T410 has
> the LVDS_PIPEB_SELECT bit set. The simple patch below fixes my machine
> by masking off this bit when determining whether or not lvds was
> initialized by the bios.
>
> I'm not sure though whether or not it's correct to expect that this bit
> might be set when lvds hasn't been initialized. The alternative seems to
> be quirking this machine as is done for some Macbooks. What is the
> correct solution?
Patch looks correct, but can you please change the mask from PIPEB to the
already exsting LVDS_PIPE_MASK? This way it's clearer what's going on.
Thanks, Daniel
>
> Thanks,
> Seth
>
>
> From 250904ac95cda7630cdd8339724e3c8feceeb586 Mon Sep 17 00:00:00 2001
> From: Seth Forshee <seth.forshee@canonical.com>
> Date: Tue, 12 Jun 2012 16:52:14 -0500
> Subject: [PATCH] drm/i915: ignore LVDS_PIPEB_SELECT when checking for LVDS
> register initialization
>
> The Lenovo Thinkpad T410 has this bit set in the LVDS register when
> booted with the lid closed, even though the LVDS hasn't really been
> initialized. Ignore this bit so that the VBT value will be used instead.
>
> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
> ---
> drivers/gpu/drm/i915/intel_display.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index e0aa064..f81f249 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -434,7 +434,7 @@ static bool is_dual_link_lvds(struct drm_i915_private *dev_priv,
> * register is uninitialized.
> */
> val = I915_READ(reg);
> - if (!(val & ~LVDS_DETECTED))
> + if (!(val & ~(LVDS_PIPEB_SELECT | LVDS_DETECTED)))
> val = dev_priv->bios_lvds_val;
> dev_priv->lvds_val = val;
> }
>
--
Daniel Vetter
Mail: daniel@ffwll.ch
Mobile: +41 (0)79 365 57 48
next prev parent reply other threads:[~2012-06-13 16:24 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-13 14:36 i915: lvds panel always blank when booted with lid closed Seth Forshee
2012-06-13 16:25 ` Daniel Vetter [this message]
2012-06-13 18:46 ` [PATCH v2] drm/i915: ignore pipe select bit when checking for LVDS register initialization Seth Forshee
2012-06-13 19:46 ` Daniel Vetter
2012-06-13 20:26 ` Seth Forshee
2012-06-14 9:56 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120613162544.GJ4829@phenom.ffwll.local \
--to=daniel@ffwll.ch \
--cc=daniel.vetter@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox