From: Oleg Nesterov <oleg@redhat.com>
To: Ingo Molnar <mingo@elte.hu>,
Peter Zijlstra <peterz@infradead.org>,
Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>,
Anton Arapov <anton@redhat.com>,
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH 5/6] uprobes: don't use loff_t for the valid virtual address
Date: Wed, 13 Jun 2012 20:51:06 +0200 [thread overview]
Message-ID: <20120613185106.GE13878@redhat.com> (raw)
In-Reply-To: <20120613184933.GA13870@redhat.com>
loff_t looks confusing when it is used for the virtual address.
Change map_info and install_breakpoint/remove_breakpoint paths
to use "unsigned long".
The patch doesn't change vma_address(), it can't return "long"
because it is used to verify the mapping. But probably this
needs some cleanups too.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
---
kernel/events/uprobes.c | 24 ++++++++----------------
1 files changed, 8 insertions(+), 16 deletions(-)
diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c
index a4dc9fa..773bb37 100644
--- a/kernel/events/uprobes.c
+++ b/kernel/events/uprobes.c
@@ -663,9 +663,8 @@ static int copy_insn(struct uprobe *uprobe, struct file *filp)
*/
static int
install_breakpoint(struct uprobe *uprobe, struct mm_struct *mm,
- struct vm_area_struct *vma, loff_t vaddr)
+ struct vm_area_struct *vma, unsigned long vaddr)
{
- unsigned long addr;
int ret;
/*
@@ -678,8 +677,6 @@ install_breakpoint(struct uprobe *uprobe, struct mm_struct *mm,
if (!uprobe->consumers)
return -EEXIST;
- addr = (unsigned long)vaddr;
-
if (!(uprobe->flags & UPROBE_COPY_INSN)) {
ret = copy_insn(uprobe, vma->vm_file);
if (ret)
@@ -708,7 +705,7 @@ install_breakpoint(struct uprobe *uprobe, struct mm_struct *mm,
* Hence increment before and decrement on failure.
*/
atomic_inc(&mm->uprobes_state.count);
- ret = set_swbp(&uprobe->arch, mm, addr);
+ ret = set_swbp(&uprobe->arch, mm, vaddr);
if (ret)
atomic_dec(&mm->uprobes_state.count);
@@ -716,9 +713,9 @@ install_breakpoint(struct uprobe *uprobe, struct mm_struct *mm,
}
static void
-remove_breakpoint(struct uprobe *uprobe, struct mm_struct *mm, loff_t vaddr)
+remove_breakpoint(struct uprobe *uprobe, struct mm_struct *mm, unsigned long vaddr)
{
- if (!set_orig_insn(&uprobe->arch, mm, (unsigned long)vaddr, true))
+ if (!set_orig_insn(&uprobe->arch, mm, vaddr, true))
atomic_dec(&mm->uprobes_state.count);
}
@@ -742,7 +739,7 @@ static void delete_uprobe(struct uprobe *uprobe)
struct map_info {
struct map_info *next;
struct mm_struct *mm;
- loff_t vaddr;
+ unsigned long vaddr;
};
static inline struct map_info *free_map_info(struct map_info *info)
@@ -836,7 +833,6 @@ static int register_for_each_vma(struct uprobe *uprobe, bool is_register)
while (info) {
struct mm_struct *mm = info->mm;
struct vm_area_struct *vma;
- loff_t vaddr;
if (err)
goto free;
@@ -846,9 +842,8 @@ static int register_for_each_vma(struct uprobe *uprobe, bool is_register)
if (!vma || !valid_vma(vma, is_register))
goto unlock;
- vaddr = vma_address(vma, uprobe->offset);
if (vma->vm_file->f_mapping->host != uprobe->inode ||
- vaddr != info->vaddr)
+ vma_address(vma, uprobe->offset) != info->vaddr)
goto unlock;
if (is_register) {
@@ -1054,10 +1049,8 @@ int uprobe_mmap(struct vm_area_struct *vma)
count = 0;
list_for_each_entry(uprobe, &tmp_list, pending_list) {
- loff_t vaddr;
-
if (!ret) {
- vaddr = vma_address(vma, uprobe->offset);
+ loff_t vaddr = vma_address(vma, uprobe->offset);
if (vaddr < vma->vm_start || vaddr >= vma->vm_end) {
put_uprobe(uprobe);
@@ -1121,9 +1114,8 @@ void uprobe_munmap(struct vm_area_struct *vma, unsigned long start, unsigned lon
build_probe_list(inode, &tmp_list);
list_for_each_entry(uprobe, &tmp_list, pending_list) {
- loff_t vaddr;
+ loff_t vaddr = vma_address(vma, uprobe->offset);
- vaddr = vma_address(vma, uprobe->offset);
if (vaddr >= start && vaddr < end) {
/*
* An unregister could have removed the probe before
--
1.5.5.1
next prev parent reply other threads:[~2012-06-13 18:53 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-13 18:49 [PATCH 0/6] uprobes: misc cleanups Oleg Nesterov
2012-06-13 18:49 ` [PATCH 1/6] uprobes: copy_insn() shouldn't depend on mm/vma/vaddr Oleg Nesterov
2012-06-13 18:50 ` [PATCH 2/6] uprobes: copy_insn() should not return -ENOMEM if __copy_insn() fails Oleg Nesterov
2012-06-13 18:50 ` [PATCH 3/6] uprobes: no need to re-check vma_address() in write_opcode() Oleg Nesterov
2012-06-13 18:50 ` [PATCH 4/6] uprobes: move BUG_ON(UPROBE_SWBP_INSN_SIZE) from write_opcode() to install_breakpoint() Oleg Nesterov
2012-06-13 18:51 ` Oleg Nesterov [this message]
2012-06-14 5:24 ` [PATCH 5/6] uprobes: don't use loff_t for the valid virtual address Ananth N Mavinakayanahalli
2012-06-14 8:38 ` Ingo Molnar
2012-06-14 8:43 ` Ananth N Mavinakayanahalli
2012-06-14 10:58 ` Anton Arapov
2012-06-14 11:05 ` [PATCH v2 " Anton Arapov
2012-06-14 17:39 ` [PATCH " Oleg Nesterov
2012-06-13 18:51 ` [PATCH 6/6] uprobes: __copy_insn() needs "loff_t offset" Oleg Nesterov
2012-06-14 5:25 ` [PATCH 0/6] uprobes: misc cleanups Ananth N Mavinakayanahalli
2012-06-14 14:54 ` Srikar Dronamraju
2012-06-14 17:44 ` Oleg Nesterov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120613185106.GE13878@redhat.com \
--to=oleg@redhat.com \
--cc=ananth@in.ibm.com \
--cc=anton@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=masami.hiramatsu.pt@hitachi.com \
--cc=mingo@elte.hu \
--cc=peterz@infradead.org \
--cc=srikar@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox