public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Ondrej Zary <linux@rainbow-software.org>
To: alsa-devel@alsa-project.org
Cc: Kernel development list <linux-kernel@vger.kernel.org>
Subject: [PATCH] snd-opti9xx: fixes for MED3931 card (opti931)
Date: Fri, 15 Jun 2012 20:55:54 +0200	[thread overview]
Message-ID: <201206152055.58181.linux@rainbow-software.org> (raw)

MED3931 card did not work (failed with "OPTI chip not found") because
snd-opti9xx gets mc_indir_index from pnp by adding 2 to the pnp-reported port.
It probably works for some cards but not for this one. Datasheet says that
the port is always at 0xe?e so just force the lowest nibble to be 0xe.

Also this card powers up with (ugly) 3D sound enabled. As there's no mixer
control for this, just disable it.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>

--- a/sound/isa/opti9xx/opti92x-ad1848.c
+++ b/sound/isa/opti9xx/opti92x-ad1848.c
@@ -135,7 +135,6 @@ struct snd_opti9xx {
 	unsigned long mc_base_size;
 #ifdef OPTi93X
 	unsigned long mc_indir_index;
-	unsigned long mc_indir_size;
 	struct resource *res_mc_indir;
 	struct snd_wss *codec;
 #endif	/* OPTi93X */
@@ -245,10 +244,8 @@ static int __devinit snd_opti9xx_init(struct snd_opti9xx *chip,
 	case OPTi9XX_HW_82C931:
 	case OPTi9XX_HW_82C933:
 		chip->mc_base = (hardware == OPTi9XX_HW_82C930) ? 0xf8f : 0xf8d;
-		if (!chip->mc_indir_index) {
+		if (!chip->mc_indir_index)
 			chip->mc_indir_index = 0xe0e;
-			chip->mc_indir_size = 2;
-		}
 		chip->password = 0xe4;
 		chip->pwd_reg = 0;
 		break;
@@ -403,7 +400,9 @@ static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip,
 
 #else	/* OPTi93X */
 	case OPTi9XX_HW_82C931:
-	case OPTi9XX_HW_82C933:
+		/* disable 3D sound (set GPIO1 as output, low) */
+		snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(20), 0x04, 0x0c);
+	case OPTi9XX_HW_82C933: /* FALL THROUGH */
 		/*
 		 * The BTC 1817DW has QS1000 wavetable which is connected
 		 * to the serial digital input of the OPTI931.
@@ -696,8 +695,7 @@ static int __devinit snd_opti9xx_read_check(struct snd_opti9xx *chip)
 		if (value == snd_opti9xx_read(chip, OPTi9XX_MC_REG(1)))
 			return 0;
 #else	/* OPTi93X */
-	chip->res_mc_indir = request_region(chip->mc_indir_index,
-					    chip->mc_indir_size,
+	chip->res_mc_indir = request_region(chip->mc_indir_index, 2,
 					    "OPTi93x MC");
 	if (chip->res_mc_indir == NULL)
 		return -EBUSY;
@@ -770,8 +768,9 @@ static int __devinit snd_card_opti9xx_pnp(struct snd_opti9xx *chip,
 #ifdef OPTi93X
 	port = pnp_port_start(pdev, 0) - 4;
 	fm_port = pnp_port_start(pdev, 1) + 8;
-	chip->mc_indir_index = pnp_port_start(pdev, 3) + 2;
-	chip->mc_indir_size = pnp_port_len(pdev, 3) - 2;
+	/* adjust mc_indir_index - some cards report it at 0xe?d,
+	   other at 0xe?c but it really is always at 0xe?e */
+	chip->mc_indir_index = (pnp_port_start(pdev, 3) & ~0xf) | 0xe;
 #else
 	devmc = pnp_request_card_device(card, pid->devs[2].id, NULL);
 	if (devmc == NULL)

-- 
Ondrej Zary

             reply	other threads:[~2012-06-15 20:22 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-15 18:55 Ondrej Zary [this message]
2012-06-18  7:44 ` [alsa-devel] [PATCH] snd-opti9xx: fixes for MED3931 card (opti931) Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201206152055.58181.linux@rainbow-software.org \
    --to=linux@rainbow-software.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox