From: H Hartley Sweeten <hartleys@visionengravers.com>
To: Linux Kernel <linux-kernel@vger.kernel.org>
Cc: <devel@driverdev.osuosl.org>, <abbotti@mev.co.uk>,
<fmhess@users.sourceforge.net>, <gregkh@linuxfoundation.org>
Subject: [PATCH 31/31] staging: comedi: ni_daq_700: refactor the pcmcia attach/detach
Date: Fri, 22 Jun 2012 16:40:40 -0700 [thread overview]
Message-ID: <201206221640.40813.hartleys@visionengravers.com> (raw)
Move the pcmcia_disable_device() call where needed in the
pcmcia attach/detach and delete the dio700_release() function.
Move the logic of dio700_config() directly into the attach
function and properly return an error code when the config
fails.
Only set the pcmcia_cur_dev, used by the comedi_driver, if
the pcmcia attach is successful. Also, make sure to NULL it
in the detach.
Remove all the kernel messages in the pcmcia support code. They
are just added noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Greg Kroah-hartman <gregkh@linuxfoundation.org>
---
drivers/staging/comedi/drivers/ni_daq_700.c | 39 +++++++----------------------
1 file changed, 9 insertions(+), 30 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c
index c57300f..83016b41 100644
--- a/drivers/staging/comedi/drivers/ni_daq_700.c
+++ b/drivers/staging/comedi/drivers/ni_daq_700.c
@@ -164,13 +164,6 @@ static struct comedi_driver driver_dio700 = {
.offset = sizeof(struct dio700_board),
};
-static void dio700_release(struct pcmcia_device *link)
-{
- dev_dbg(&link->dev, "%s\n", __func__);
-
- pcmcia_disable_device(link);
-}
-
static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev,
void *priv_data)
{
@@ -180,50 +173,36 @@ static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev,
return pcmcia_request_io(p_dev);
}
-static void dio700_config(struct pcmcia_device *link)
+static int dio700_cs_attach(struct pcmcia_device *link)
{
int ret;
- dev_dbg(&link->dev, "%s\n", __func__);
-
link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_AUDIO |
CONF_AUTO_SET_IO;
ret = pcmcia_loop_config(link, dio700_pcmcia_config_loop, NULL);
- if (ret) {
- dev_warn(&link->dev, "no configuration found\n");
+ if (ret)
goto failed;
- }
if (!link->irq)
goto failed;
ret = pcmcia_enable_device(link);
- if (ret != 0)
+ if (ret)
goto failed;
- return;
-
-failed:
- dev_dbg(&link->dev, "%s failed\n", __func__);
- dio700_release(link);
-
-}
-
-static int dio700_cs_attach(struct pcmcia_device *link)
-{
- dev_dbg(&link->dev, "%s\n", __func__);
-
pcmcia_cur_dev = link;
-
- dio700_config(link);
-
return 0;
+
+failed:
+ pcmcia_disable_device(link);
+ return ret;
}
static void dio700_cs_detach(struct pcmcia_device *link)
{
- dio700_release(link);
+ pcmcia_disable_device(link);
+ pcmcia_cur_dev = NULL;
}
static const struct pcmcia_device_id dio700_cs_ids[] = {
--
1.7.11
reply other threads:[~2012-06-22 23:40 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201206221640.40813.hartleys@visionengravers.com \
--to=hartleys@visionengravers.com \
--cc=abbotti@mev.co.uk \
--cc=devel@driverdev.osuosl.org \
--cc=fmhess@users.sourceforge.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox