From: H Hartley Sweeten <hartleys@visionengravers.com>
To: Linux Kernel <linux-kernel@vger.kernel.org>
Cc: <devel@driverdev.osuosl.org>, <abbotti@mev.co.uk>,
<fmhess@users.sourceforge.net>, <gregkh@linuxfoundation.org>
Subject: [PATCH 16/36] staging: comedi: cb_pcidas: simplify the boardinfo
Date: Tue, 26 Jun 2012 17:56:43 -0700 [thread overview]
Message-ID: <201206261756.44046.hartleys@visionengravers.com> (raw)
The boardinfo values 'has_ai_trig_gated' and 'has_ai_trig_invert'
are both only set for the "1602" versions of the boards supported
by this driver.
Simplify the boardinfo, and the code, by replacing these two
variables with one "is_1602" variable.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/comedi/drivers/cb_pcidas.c | 41 ++++++++++++------------------
1 file changed, 16 insertions(+), 25 deletions(-)
diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c
index 4b653c5..0c14582 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas.c
@@ -250,8 +250,7 @@ struct cb_pcidas_board {
const struct comedi_lrange *ranges;
enum trimpot_model trimpot;
unsigned has_dac08:1;
- unsigned has_ai_trig_gated:1; /* Tells if the AI trigger can be gated */
- unsigned has_ai_trig_invert:1; /* Tells if the AI trigger can be inverted */
+ unsigned is_1602:1;
};
static const struct cb_pcidas_board cb_pcidas_boards[] = {
@@ -269,8 +268,7 @@ static const struct cb_pcidas_board cb_pcidas_boards[] = {
.ranges = &cb_pcidas_ranges,
.trimpot = AD8402,
.has_dac08 = 1,
- .has_ai_trig_gated = 1,
- .has_ai_trig_invert = 1,
+ .is_1602 = 1,
},
{
.name = "pci-das1200",
@@ -285,8 +283,7 @@ static const struct cb_pcidas_board cb_pcidas_boards[] = {
.ranges = &cb_pcidas_ranges,
.trimpot = AD7376,
.has_dac08 = 0,
- .has_ai_trig_gated = 0,
- .has_ai_trig_invert = 0,
+ .is_1602 = 0,
},
{
.name = "pci-das1602/12",
@@ -302,8 +299,7 @@ static const struct cb_pcidas_board cb_pcidas_boards[] = {
.ranges = &cb_pcidas_ranges,
.trimpot = AD7376,
.has_dac08 = 0,
- .has_ai_trig_gated = 1,
- .has_ai_trig_invert = 1,
+ .is_1602 = 1,
},
{
.name = "pci-das1200/jr",
@@ -318,8 +314,7 @@ static const struct cb_pcidas_board cb_pcidas_boards[] = {
.ranges = &cb_pcidas_ranges,
.trimpot = AD7376,
.has_dac08 = 0,
- .has_ai_trig_gated = 0,
- .has_ai_trig_invert = 0,
+ .is_1602 = 0,
},
{
.name = "pci-das1602/16/jr",
@@ -334,8 +329,7 @@ static const struct cb_pcidas_board cb_pcidas_boards[] = {
.ranges = &cb_pcidas_ranges,
.trimpot = AD8402,
.has_dac08 = 1,
- .has_ai_trig_gated = 1,
- .has_ai_trig_invert = 1,
+ .is_1602 = 1,
},
{
.name = "pci-das1000",
@@ -350,8 +344,7 @@ static const struct cb_pcidas_board cb_pcidas_boards[] = {
.ranges = &cb_pcidas_ranges,
.trimpot = AD7376,
.has_dac08 = 0,
- .has_ai_trig_gated = 0,
- .has_ai_trig_invert = 0,
+ .is_1602 = 0,
},
{
.name = "pci-das1001",
@@ -366,8 +359,7 @@ static const struct cb_pcidas_board cb_pcidas_boards[] = {
.ranges = &cb_pcidas_alt_ranges,
.trimpot = AD7376,
.has_dac08 = 0,
- .has_ai_trig_gated = 0,
- .has_ai_trig_invert = 0,
+ .is_1602 = 0,
},
{
.name = "pci-das1002",
@@ -382,8 +374,7 @@ static const struct cb_pcidas_board cb_pcidas_boards[] = {
.ranges = &cb_pcidas_ranges,
.trimpot = AD7376,
.has_dac08 = 0,
- .has_ai_trig_gated = 0,
- .has_ai_trig_invert = 0,
+ .is_1602 = 0,
},
};
@@ -938,8 +929,7 @@ static int cb_pcidas_ai_cmdtest(struct comedi_device *dev,
~(CR_FLAGS_MASK & ~(CR_EDGE | CR_INVERT));
err++;
}
- if (!thisboard->has_ai_trig_invert &&
- (cmd->start_arg & CR_INVERT)) {
+ if (!thisboard->is_1602 && (cmd->start_arg & CR_INVERT)) {
cmd->start_arg &= (CR_FLAGS_MASK & ~CR_INVERT);
err++;
}
@@ -1118,11 +1108,12 @@ static int cb_pcidas_ai_cmd(struct comedi_device *dev,
bits |= SW_TRIGGER;
else if (cmd->start_src == TRIG_EXT) {
bits |= EXT_TRIGGER | TGEN | XTRCL;
- if (thisboard->has_ai_trig_invert
- && (cmd->start_arg & CR_INVERT))
- bits |= TGPOL;
- if (thisboard->has_ai_trig_gated && (cmd->start_arg & CR_EDGE))
- bits |= TGSEL;
+ if (thisboard->is_1602) {
+ if (cmd->start_arg & CR_INVERT)
+ bits |= TGPOL;
+ if (cmd->start_arg & CR_EDGE)
+ bits |= TGSEL;
+ }
} else {
comedi_error(dev, "bug!");
return -1;
--
1.7.11
next reply other threads:[~2012-06-27 0:56 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-27 0:56 H Hartley Sweeten [this message]
2012-06-27 9:20 ` [PATCH 16/36] staging: comedi: cb_pcidas: simplify the boardinfo Ian Abbott
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201206261756.44046.hartleys@visionengravers.com \
--to=hartleys@visionengravers.com \
--cc=abbotti@mev.co.uk \
--cc=devel@driverdev.osuosl.org \
--cc=fmhess@users.sourceforge.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox