From: Jiri Olsa <jolsa@redhat.com>
To: Jovi Zhang <bookjovi@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>,
acme@ghostprotocols.net, a.p.zijlstra@chello.nl,
mingo@redhat.com, paulus@samba.org, linux-kernel@vger.kernel.org
Subject: [PATCHv2 1/2] perf, tool: Fix hw breakpoint's type modifier parsing
Date: Fri, 29 Jun 2012 09:22:54 +0200 [thread overview]
Message-ID: <20120629072254.GA940@krava.brq.redhat.com> (raw)
In-Reply-To: <CACV3sb+ykMp0n_c7GwETPnT8bV5UWnM=bVdh3DakNKksK2QNWA@mail.gmail.com>
On Fri, Jun 29, 2012 at 09:01:05AM +0800, Jovi Zhang wrote:
> On Fri, Jun 29, 2012 at 8:40 AM, Namhyung Kim <namhyung@kernel.org> wrote:
> > On Thu, 28 Jun 2012 23:18:48 +0200, Jiri Olsa wrote:
> >> Fixing the hw breakpoint's type modifier parsing to allow all
> >> possible combinations of 'rwx' characters.
> >>
> >> Adding automated tests to the parsing test suite.
> >>
> >
> > You might need this too:
> >
> > Reported-by: Zovi Zhang <bookzovi@gmail.com>
> >
> > Thanks,
> > Namhyung
> >
>
> Thanks Namhyung, Jovi Zhang <bookjovi@gmail.com> :)
oops, sry about that..
Arnaldo, please take this one
thanks,
jirka
---
Fixing the hw breakpoint's type modifier parsing to allow all
possible combinations of 'rwx' characters.
Adding automated tests to the parsing test suite.
Original-patch-by: Namhyung Kim <namhyung@kernel.org>
Reported-by: Jovi Zhang <bookjovi@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
---
tools/perf/util/parse-events-test.c | 37 +++++++++++++++++++++++++++++++++++
tools/perf/util/parse-events.c | 16 ++++++++++++--
tools/perf/util/parse-events.l | 2 +-
3 files changed, 51 insertions(+), 4 deletions(-)
diff --git a/tools/perf/util/parse-events-test.c b/tools/perf/util/parse-events-test.c
index 229af6d..50e6a94 100644
--- a/tools/perf/util/parse-events-test.c
+++ b/tools/perf/util/parse-events-test.c
@@ -181,6 +181,22 @@ static int test__checkevent_breakpoint_w(struct perf_evlist *evlist)
return 0;
}
+static int test__checkevent_breakpoint_rw(struct perf_evlist *evlist)
+{
+ struct perf_evsel *evsel = list_entry(evlist->entries.next,
+ struct perf_evsel, node);
+
+ TEST_ASSERT_VAL("wrong number of entries", 1 == evlist->nr_entries);
+ TEST_ASSERT_VAL("wrong type",
+ PERF_TYPE_BREAKPOINT == evsel->attr.type);
+ TEST_ASSERT_VAL("wrong config", 0 == evsel->attr.config);
+ TEST_ASSERT_VAL("wrong bp_type",
+ (HW_BREAKPOINT_R|HW_BREAKPOINT_W) == evsel->attr.bp_type);
+ TEST_ASSERT_VAL("wrong bp_len",
+ HW_BREAKPOINT_LEN_4 == evsel->attr.bp_len);
+ return 0;
+}
+
static int test__checkevent_tracepoint_modifier(struct perf_evlist *evlist)
{
struct perf_evsel *evsel = list_entry(evlist->entries.next,
@@ -352,6 +368,19 @@ static int test__checkevent_breakpoint_w_modifier(struct perf_evlist *evlist)
return test__checkevent_breakpoint_w(evlist);
}
+static int test__checkevent_breakpoint_rw_modifier(struct perf_evlist *evlist)
+{
+ struct perf_evsel *evsel = list_entry(evlist->entries.next,
+ struct perf_evsel, node);
+
+ TEST_ASSERT_VAL("wrong exclude_user", evsel->attr.exclude_user);
+ TEST_ASSERT_VAL("wrong exclude_kernel", !evsel->attr.exclude_kernel);
+ TEST_ASSERT_VAL("wrong exclude_hv", evsel->attr.exclude_hv);
+ TEST_ASSERT_VAL("wrong precise_ip", evsel->attr.precise_ip);
+
+ return test__checkevent_breakpoint_rw(evlist);
+}
+
static int test__checkevent_pmu(struct perf_evlist *evlist)
{
@@ -584,6 +613,14 @@ static struct test__event_st test__events[] = {
.name = "instructions:H",
.check = test__checkevent_exclude_guest_modifier,
},
+ [26] = {
+ .name = "mem:0:rw",
+ .check = test__checkevent_breakpoint_rw,
+ },
+ [27] = {
+ .name = "mem:0:rw:kp",
+ .check = test__checkevent_breakpoint_rw_modifier,
+ },
};
#define TEST__EVENTS_CNT (sizeof(test__events) / sizeof(struct test__event_st))
diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index 0cc27da..7ae76af 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -383,21 +383,31 @@ parse_breakpoint_type(const char *type, struct perf_event_attr *attr)
if (!type || !type[i])
break;
+#define CHECK_SET_TYPE(bit) \
+do { \
+ if (attr->bp_type & bit) \
+ return -EINVAL; \
+ else \
+ attr->bp_type |= bit; \
+} while (0)
+
switch (type[i]) {
case 'r':
- attr->bp_type |= HW_BREAKPOINT_R;
+ CHECK_SET_TYPE(HW_BREAKPOINT_R);
break;
case 'w':
- attr->bp_type |= HW_BREAKPOINT_W;
+ CHECK_SET_TYPE(HW_BREAKPOINT_W);
break;
case 'x':
- attr->bp_type |= HW_BREAKPOINT_X;
+ CHECK_SET_TYPE(HW_BREAKPOINT_X);
break;
default:
return -EINVAL;
}
}
+#undef CHECK_SET_TYPE
+
if (!attr->bp_type) /* Default */
attr->bp_type = HW_BREAKPOINT_R | HW_BREAKPOINT_W;
diff --git a/tools/perf/util/parse-events.l b/tools/perf/util/parse-events.l
index 488362e..a066894 100644
--- a/tools/perf/util/parse-events.l
+++ b/tools/perf/util/parse-events.l
@@ -76,7 +76,7 @@ num_hex 0x[a-fA-F0-9]+
num_raw_hex [a-fA-F0-9]+
name [a-zA-Z_*?][a-zA-Z0-9_*?]*
modifier_event [ukhpGH]{1,8}
-modifier_bp [rwx]
+modifier_bp [rwx]{1,3}
%%
--
1.7.7.6
next prev parent reply other threads:[~2012-06-29 7:23 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-27 8:39 [PATCH] perf: fix wrong hw_breakpoint documentation Jovi Zhang
2012-06-27 8:59 ` Namhyung Kim
2012-06-27 13:40 ` Jovi Zhang
2012-06-27 16:15 ` Arnaldo Carvalho de Melo
2012-06-27 19:07 ` Jiri Olsa
2012-06-27 19:58 ` Peter Zijlstra
2012-06-27 20:19 ` Jiri Olsa
2012-06-28 1:30 ` Namhyung Kim
2012-06-28 10:32 ` Jiri Olsa
2012-06-28 21:18 ` [PATCH 0/2] perf, tool: Hw breakpoint events parsing fixes Jiri Olsa
2012-06-28 21:18 ` [PATCH 1/2] perf, tool: Fix hw breakpoint's type modifier parsing Jiri Olsa
2012-06-29 0:40 ` Namhyung Kim
2012-06-29 1:01 ` Jovi Zhang
2012-06-29 1:34 ` Namhyung Kim
2012-06-29 7:22 ` Jiri Olsa [this message]
2012-07-06 10:57 ` [tip:perf/core] perf tools: Fix hw breakpoint' s " tip-bot for Jiri Olsa
2012-06-28 21:18 ` [PATCH 2/2] perf, tool: Handle hw breakpoints event names via perf_evsel__name Jiri Olsa
2012-07-06 10:58 ` [tip:perf/core] perf evsel: Handle hw breakpoints event names in perf_evsel__name() tip-bot for Jiri Olsa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120629072254.GA940@krava.brq.redhat.com \
--to=jolsa@redhat.com \
--cc=a.p.zijlstra@chello.nl \
--cc=acme@ghostprotocols.net \
--cc=bookjovi@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=namhyung@kernel.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox