[PATCH V2 0/7] Initial release of Samsung S2MPS11 pmic driver

[PATCH V2 0/7] Initial release of Samsung S2MPS11 pmic driver

[Sangbeom Kim]

The S2MPS11 is comprised of high efficient Buck converters,
various LDOs, and an RTC and tightly coupled with Multi Core Samsung 
Application Processors, which is used in a wide variety of mobile applications
such as smart phones and tablet PCs.
S2MPS11 provide 10 high efficiency buck converters and 38 LDO regulators.
Especially, Buck2 can support 7.0A current capacity for high performance
samsung application processor.
Most of S2MPS11 feature are similar to S5M series.
and Instead of using s5m prefix, Samsung decide to use s2m prefix.
So, I try to make common mfd driver for S2M and S5M series.
Most of s5m prefix is changed into sec prefix.

Changes since V1:
1. Replace list_voltage with standard framework
2. Apply regmap_irq
3. Minor changes.

Thanks,
Sangbeom.

Re: [PATCH V2 0/7] Initial release of Samsung S2MPS11 pmic driver

[Samuel Ortiz]

Hi Sangbeom,

On Sat, Jul 07, 2012 at 06:39:12PM +0900, Sangbeom Kim wrote:
> The S2MPS11 is comprised of high efficient Buck converters,
> various LDOs, and an RTC and tightly coupled with Multi Core Samsung 
> Application Processors, which is used in a wide variety of mobile applications
> such as smart phones and tablet PCs.
> S2MPS11 provide 10 high efficiency buck converters and 38 LDO regulators.
> Especially, Buck2 can support 7.0A current capacity for high performance
> samsung application processor.
> Most of S2MPS11 feature are similar to S5M series.
> and Instead of using s5m prefix, Samsung decide to use s2m prefix.
> So, I try to make common mfd driver for S2M and S5M series.
> Most of s5m prefix is changed into sec prefix.
> 
> Changes since V1:
> 1. Replace list_voltage with standard framework
> 2. Apply regmap_irq
> 3. Minor changes.
I was trying to apply this patchset to my for-next branch, but it doesn't
apply properly.
Could you please rebase it against this branch and send it to me ?

Cheers,
Samuel.

-- 
Intel Open Source Technology Centre
http://oss.intel.com/

RE: [PATCH V2 0/7] Initial release of Samsung S2MPS11 pmic driver

[Sangbeom Kim]

Hi!
On Mon, Jul 09, 2012 at 08:13PM +0900, Samuel Ortiz wrote:
> Hi Sangbeom,
> 
> On Sat, Jul 07, 2012 at 06:39:12PM +0900, Sangbeom Kim wrote:
> > The S2MPS11 is comprised of high efficient Buck converters,
> > various LDOs, and an RTC and tightly coupled with Multi Core Samsung
> > Application Processors, which is used in a wide variety of mobile applications
> > such as smart phones and tablet PCs.
> > S2MPS11 provide 10 high efficiency buck converters and 38 LDO regulators.
> > Especially, Buck2 can support 7.0A current capacity for high performance
> > samsung application processor.
> > Most of S2MPS11 feature are similar to S5M series.
> > and Instead of using s5m prefix, Samsung decide to use s2m prefix.
> > So, I try to make common mfd driver for S2M and S5M series.
> > Most of s5m prefix is changed into sec prefix.
> >
> > Changes since V1:
> > 1. Replace list_voltage with standard framework
> > 2. Apply regmap_irq
> > 3. Minor changes.
> I was trying to apply this patchset to my for-next branch, but it doesn't
> apply properly.
> Could you please rebase it against this branch and send it to me ?
> 
> Cheers,
> Samuel.

Sorry, After rebase it, I will send again.

Thanks,
Sangbeom.