Re: [PATCH] Bluetooth: btusb: Add vendor specific ID (0a5c:21f4) BCM20702A0

Luis Henriques
2012-06-08T14:19:20Z

Hi Gustavo,

Gustavo Padovan <gustavo@padovan.org> writes:

> Hi Manoj,
>
> * Manoj Iyer <manoj.iyer@canonical.com> [2012-04-11 13:39:23 -0500]:
>
>> usb-devices:
>> T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
>> D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
>> P: Vendor=0a5c ProdID=21f4 Rev=01.12
>> S: Manufacturer=Broadcom Corp
>> S: Product=BCM20702A0
>> S: SerialNumber=E4D53DF15584
>> C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
>> I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
>> I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
>> I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
>> I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
>
> You need to give the usb-devices for the non-working case. I know it
> works but we need to document this right in the commit message.

I was wondering whether there has been any progress with this patch.
Is there something still pending?

I'll try to get the patch tested as we have a bug open to support this
hardware.

Cheers,
--
Luis